Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Recherche par propriété

Une liste de toutes les pages qui ont la propriété « Step Content » avec la valeur « Connect the positive pin of the first capacitor to the join the diode, resistors and the left pin of the regulator ». Puisqu’il n’y a que quelques résultats, les valeurs proches sont également affichées.

Affichage de 101 résultats à partir du n°1.

Voir (200 précédentes | 200 suivantes) (20 | 50 | 100 | 250 | 500).


    

Liste de résultats

  • Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
  • Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
  • IoT with ESP32 board  + (Once you have set up an account on adafruit.io, go ahead creating a new Feed. Creat a new feed and name it, for example "lightsensorvalue".)
  • Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
  • Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
  • Key crack activity with 3D printing  + (Once you're done, enter [https://www.tinkercad.com/things/2xddbnQ77OX this] address on your web browser. You will land on a tinkercad design that you will be able to customize.)
  • Key crack activity with 3D printing  + (Once you're done, enter [https://www.tinkercad.com/things/2xddbnQ77OX this] address on your web browser. You will land on a tinkercad design that you will be able to customize.)
  • One Shot Keto reviews for Canada  + (One Shot Keto, like any other exogenous keOne Shot Keto, like any other exogenous ketones, has the same function: to boost ketone level in your blood and help the users to reach the stage called ketosis. Ketones are the derivatives of fat that are used by your body as a fuel. This is the most important aspect where most of the people seem to be confused. Let me clarify for you as simply as possible. First, I want to clarify the myths regarding the use of exogenous ketones. '''Does One Shot Keto Perfect Work?''' This is the most important aspect where most of the people seem to be confused. Let me clarify for you as simply as possible. First, I want to clarify the myths regarding the use of exogenous ketones. '''If keto diet is necessary, what is the use of One Shot Keto?''' If you can remain strongly committed to Keto diet no matter how hard it may be, restrain yourself from over-eating no matter how hungry you may feel and wait as long as it may take to lose your weight then you don’t need One Shot Keto or any other supplements. So, the bottom line is, One Shot Keto helps you a lot in your transition from your normal diet to Keto diet and to remain in the Keto diet. '''One Shot Keto Real-Life Usage Experience''' After seeing most of the people claim to have a positive experience with One Shot Keto, I decided to give it a try. Instead of trying at a single time, I took One Shot Keto at different times of the day. '''i. Morning''' I took One Shot Keto in the morning to check whether it curbs my appetite and it did, to some extent. It allowed me to go some extra hours without eating. '''ii. Afternoon''' It is very common to feel dull, lazy, and exhausted during the day, especially at the beginning of keto diet or when we are fasting along with keto diet. Although it wasn’t as quick as I expected, taking One Shot Keto in this situation actually energized me and definitely made me feel a lot better. It took around 10-15 minutes to actually see the results and only lasted a few hours but it felt like taking a painkiller. '''iii. Before Workout''' I could do some light to moderate workout after taking One Shot Keto. I got tired and needed more rest than the time I was on a normal diet but being able to workout on Keto diet is a huge plus point. Doing heavy exercise is a bad idea during keto diet as it may lead one shot keto, so, we avoided it. '''One Shot Keto Pricing''' If you are worry about the one shot Keto price, so just I will reveal here, it is available at afffordable price in canada. I will recommend about purcharse Keto One Shot from Official website.harse Keto One Shot from Official website.)
  • Electronic textile bag  + (One of the patches must be slightly bigger than the other 3.)
  • Electronic textile bag  + (One of the patches must be slightly bigger than the other 3.)
  • How to Put Music on MP3 Player from Spotify  + (Open AudFree [https://www.audfree.com/spotOpen AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Music Converter] and the Spotify app will load automatically. Find Spotify songs that you want to put on MP3 player. Then, drag them to AudFree's main interface. Or, you can copy the track link and paste it in the search bar. Next, click "+" icon.t in the search bar. Next, click "+" icon.)
  • Design for lasercut with Makercase  + (Open the website [http://www.makercase.comOpen the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
  • Design for lasercut with Makercase  + (Open the website [http://www.makercase.comOpen the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
  • Découper au laser une modélisation sketchup  + (Ouvrir le fichier "maison.DAE")
  • Découper au laser une modélisation sketchup  + (Avant d'enregistrer votre travail, il faut repositionner votre patron dans la feuille grâce aux deux outils de translation et de rotation du patron.)
  • People pedal powered computer charger  + (People pedal power is a form of renewable People pedal power is a form of renewable energy. One human can produce around 75W electric power sustained for about 15min, or 50W during a longer period. This is enough power to be able to charge an average laptop. This energy can be harvested on a PPP device. To find out more about People Pedal Power, visit our site https://ciklic.wordpress.com/2017/08/05/renewable-energy-what-can-you-expect/8/05/renewable-energy-what-can-you-expect/)
  • Showerloop - Guide 5: UV Assembly  + (Place the lock nut inside the UV cap. Use teflon tape or hemp fibre with some mineral oil and place it inside the UV cap.)
  • Showerloop - Guide 5: UV Assembly  + (Place the lock nut inside the UV cap. Use teflon tape or hemp fibre with some mineral oil and place it inside the UV cap.)
  • Best GIF Combiner to Combine GIFs into One  + (Please download and install [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] on your computer first. Next, you need to drag your GIFs to the program or add them with the "Open File" icon located in the bottom left corner.)
  • How to Merge Audio and Video into One  + (Please download, install, and open the [htPlease download, install, and open the [https://www.joyoshare.com/video-joiner/ video joiner] on your computer. Find "Open File" button at bottom left of its main interface to browse and upload the video to be merged with an audio. Also, you can directly drag and drop.dio. Also, you can directly drag and drop.)
  • SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
  • SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
  • Distributeur de croquettes connecte EN COURS...  + (Suite du tutoriel à venir prochainement)
  • Losslessly Combine WebM Files in 2020  + (Quickly download and install Joyoshare [htQuickly download and install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on Windows or Mac. After that, you should open it and click "Open File" to choose your WebM files. Alternatively, you can drag and drop files from desktop to the program.nd drop files from desktop to the program.)
  • IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
  • IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
  • Créer un compte "The Things Network" et rejoindre une communauté  + (Rendez-vous sur la page d'accueil du site "The Things Network" (https://www.thethingsnetwork.org/) et cliquez sur "'''SIGN UP'''" dans le bandeau du haut.)
  • Créer un compte "The Things Network" et rejoindre une communauté  + (Rendez-vous sur la page d'accueil du site "The Things Network" (https://www.thethingsnetwork.org/) et cliquez sur "'''SIGN UP'''" dans le bandeau du haut.)
  • Mighty maker level belt  + (Set up a temporary circuit using a bread bSet up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
  • Conductive paint + Makey Makey  + (Simply mix the glue with the graphite powdSimply mix the glue with the graphite powder in equal parts. You can add more glue than graphite powder if you believe you don’t have enough powder. When done, add water as needed to reach the desired consistency. Your mixture needs to have roughly the same consistency as real paint. Watch [https://www.youtube.com/watch?v=phEke_LZJlk this] video for extra help.?v=phEke_LZJlk this] video for extra help.)
  • Conductive paint + Makey Makey  + (To check whether your conductive paint is To check whether your conductive paint is indeed conductive, we can run a test with the aid of a voltmeter. Paint a straight line on a sheet of paper. Then place the two ends of the voltmeter (the red one and the black one) each at one end of the line. Place the cursor of the voltmeter in a position to read the value of resistance and a number should display on your voltmeter.a number should display on your voltmeter.)
  • Water probe  + (Solder a strip of male headers (about 10 pSolder a strip of male headers (about 10 pins) onto the PCB. Beware that one pin needs to go into GND on the arduino board, another one into A5 and a third one into A0. Grab the 10kOhm resistor. Solder one end onto the header pin which goes into GND on the arduino board, the other end of the resistor onto the header pin which end on A0 in the arduino board. This way the resistor will basically create a bridge between GND and A0 on the arduino board. Grab two pieces of solid core wire (about 30cm long each)  and strip both ends of each piece. Solder one end of the first wire onto the header pin which ends in A5; solder one end of the second piece of wire onto the header pin which ends in A0 on the arduino board. Connect the other ends of the pieces of solid core wire to the binding post. One end goes into the red part of the post, the other end goes into the black part of the binding post. Now cut two pieces of solid core wire (about 10 cm long each), and strip both ends of each wire. Connect one end of each piece of wire to the metal ends of the binding post. Use the bolts to secure the solid core wire in place. Curl the other ends. Lastly, try placing the PCB on the arduino board, and make sure that one pin goes into GND, another into A0 and a third pin into A5., another into A0 and a third pin into A5.)
  • Make Collaborative Playlists on Spotify  + (Step 1. In the left panel, right-click a playlist you wish to open. Step 2. Select 'Collaborative Playlist'. Step 3. Right-click on the playlist again, then scroll down to 'Share'. Step 4. Choose 'Copy Playlist Link' then send it to your friends.)
  • Mini écran connecté  + (IFTTT est un service qui permet d'automatiIFTTT est un service qui permet d'automatiser des tâches, Adafruit IO est compatible avec celui-ci.
    Si vous voulez utiliser IFTTT avec votre propre serveur, il y a des webhooks qui permettent de faire cela.
    Nous allons voir comment afficher les notifications d'un smartphone sur notre écran.
    Bien que ce soit amusant comme projet, n'oubliez pas que vous allez donner accès à vos notifications à deux services sur internet. Même si les communications sont en théorie sécurisée, niveau vie privée c'est une très mauvaise idée.
    *Créer un compte sur IFTTT *Installer l'application android '''if''' *Sur l'interface web d'IFTTT, cliquer sur '''My Applets''' *Cliquer sur '''New Applet''' *Choisissez le service '''Android Device''' *Choisissez '''Notification Received''' '''then''' *Choisissez '''Adafruit''' *Choisissez '''Send data to Adafruit IO''' *Dans '''Feed Name''' mettez '''notifications''' *Dans '''Data to save''' choisisez '''AppName''' et '''Notification''' '''Title'''
    L'ESP8266 va se déconnecter (puis se reconnecter) du serveur MQTT, si le message est trop long.

    Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.
    le message est trop long.</div> </div><br/>Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.<br/>)
  • Mini écran connecté  + (IFTTT est un service qui permet d'automatiIFTTT est un service qui permet d'automatiser des tâches, Adafruit IO est compatible avec celui-ci.
    Si vous voulez utiliser IFTTT avec votre propre serveur, il y a des webhooks qui permettent de faire cela.
    Nous allons voir comment afficher les notifications d'un smartphone sur notre écran.
    Bien que ce soit amusant comme projet, n'oubliez pas que vous allez donner accès à vos notifications à deux services sur internet. Même si les communications sont en théorie sécurisée, niveau vie privée c'est une très mauvaise idée.
    *Créer un compte sur IFTTT *Installer l'application android '''if''' *Sur l'interface web d'IFTTT, cliquer sur '''My Applets''' *Cliquer sur '''New Applet''' *Choisissez le service '''Android Device''' *Choisissez '''Notification Received''' '''then''' *Choisissez '''Adafruit''' *Choisissez '''Send data to Adafruit IO''' *Dans '''Feed Name''' mettez '''notifications''' *Dans '''Data to save''' choisisez '''AppName''' et '''Notification''' '''Title'''
    L'ESP8266 va se déconnecter (puis se reconnecter) du serveur MQTT, si le message est trop long.

    Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.
    le message est trop long.</div> </div><br/>Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.<br/>)
  • EMI probe 12+ activities  + (The EMI detector comes in two forms: the gThe EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
  • PiKon telescope  + (The PiKon telescope is a robust design butThe PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
  • Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing  + (The [https://www.seeedstudio.com/60GHz-mmWThe [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
  • Fruit piano  + (The activity consists in turning fruits inThe activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
  • Fruit piano  + (The activity consists in turning fruits inThe activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
  • Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictuFirst of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
  • Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictuFirst of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
  • Buzzing Bee Circuit  + (The battery holder can be found on TinkerCThe battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
    created file to the printer. PRINT! <br/>)
  • DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circuThe next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
  • DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circuThe next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
  • DIY Makey Makey with Arduino Leonardo  + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
  • Arduino to ThingSpeak via SIM800 No Wi-Fi  + (The legacy project documents that were oriThe legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
  • Straw connectors  + (The objects we have prototyped are severalThe objects we have prototyped are several different 3D printed straw connectors, allowing the construction of different shapes. They are easily done and cost-effective: it takes about 5 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, teachers, educators, parents and even children, under appropriate supervision. The straw connectors designs can be downloaded from [https://www.thingiverse.com/thing:11255 here]..thingiverse.com/thing:11255 <u>here</u>].)
  • Straw connectors  + (The objects we have prototyped are severalThe objects we have prototyped are several different 3D printed straw connectors, allowing the construction of different shapes. They are easily done and cost-effective: it takes about 5 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, teachers, educators, parents and even children, under appropriate supervision. The straw connectors designs can be downloaded from [https://www.thingiverse.com/thing:11255 here]..thingiverse.com/thing:11255 <u>here</u>].)
  • OpenKnit: digital fabrication tool to create your own clothes  + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
  • Ultimate Guide to Fix Tidal Not Playing Songs  + (The tidal app for music streaming is now aThe tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
  • Geiger counter  + (This is a timelapse of the assembly process of the geiger counter)
  • E-Textile Monster  + (This is where you need to decide what shapThis is where you need to decide what shape you want your monster to be and what components it will include. You need to make sure there is room for each of your components and the battery pack as well as decide where you want to squeeze the monster for the components to turn on. TIP: do not make your monster too big making your circuit components too spread out! Otherwise you will spend a long time sewing to connect the components together sewing to connect the components together)
  • Node Red with MQTT on Raspberry Pi  + (This project works without much additional hardware. The one and only requirement is you just need a Raspberry Pi.)
  • 8bits & Chocolate - decorative candy dispenser  + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
  • How to Listen to Tidal on Multiple Devices Simultaneously  + (Tidal offers several major plans for you tTidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month. # If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days. # If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus. # To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family. # After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
    '' from Family Hi-Fi or Hi-Fi Plus. <br/>)
  • Snap circuits activities for 12+  + (To begin with, kids will need to build or To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
  • How to Play Apple Music Soundtrack in GTA5  + (To enjoy your Apple Music library while plTo enjoy your Apple Music library while playing GTA 5, you'll first need to convert your Apple Music tracks into a compatible format. The best tool for this job is [https://www.audfree.com/auditior AudFree Apple Music Converter]. This powerful software allows you to convert Apple Music songs into formats like MP3 or M4A, making them compatible with GTA 5. Here's why AudFree Apple Music Converter stands out: 1) '''Convert encrypted Apple Music content to various formats:''' AudFree Apple Music Converter can convert all content from Apple Music to unprotected MP3, FLAC, WAV, AAC, M4A, and M4B files. 2)  '''Keep lossless audio quality:''' This expert tool ensures that your tracks are converted with the original quality audio, preserving the integrity of your music. 3) '''Support batch conversion at 30X speed:''' The software is user-friendly, and the conversion process is quick at up to 30X faster speed. It enables you to convert unlimited number of tracks together. 4) '''Preservation of Metadata Info:''' It retains important song metadata information. With it,  ID3 tags such as artist, album, and cover art will be retained, ensuring your GTA 5 experience is as immersive as possible. 5) '''Play Apple Music without premium:''' Once converted, you can keep the Apple Music conversions forever. That means you can play those unprotected Apple Music audio files at all devices and players whenever you like.io files at all devices and players whenever you like.)
  • Showerloop - Guide 4: Make the backplate  + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
  • Showerloop - Guide 4: Make the backplate  + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
  • Casse brique game Maker  + (Comme pour les sprites, vous allez devoir Comme pour les sprites, vous allez devoir créer un objet par élément de votre jeu. Nous allons d'abords créer chaque objet (raquette, mur, brique, balle), c'est important de créer chaque objet avant de commencer à les paramétrer en profondeur. Une fois chaque objet créer nous allons nous intéresser à la raquette. Tout d'abord dans l'évenement create de votre raquette, initialisez quatre variables : * nb_brique à 0 * ismoving_right à 0 * ismoving_left à 0 * ismoving à 0 la première servira à savoir s'il reste des briques sur le terrain et les trois autres seront utiles pour le contrôle des mouvement de la raquette. sur l'évènement Step, entrez l'algorithme suivant : si nb_brique = 0 { alors restart la room; } ensuite créer un évènement "collision avec mur", et mettez comme le "bounce" avec les paramètre suivant : appliquer aux autre, précision précise, et rebondir sur tous les objet. maintenant passons aux mouvement : pour tout ce qui concerne la gauche, créez un évènement left pressed et left released. Dans left pressed, implantez l'algo suivant : si ismoving =0 { start moving in a direction (droite, force -7, relative) set variable ismoving_left to 1 set variable ismoving to 1 } Ce bout de code signifie, que si la raquette ne bouge alors elle commence à se déplacer à gauche lorsque l'on appuie sur la flèche de gauche, il permet aussi d'empécher certain bug si jamais la flêche droite et la flèche gauche sont appuyées en même temps. Pour left released le code ressemblera à ça : si ismoving_left = 1 { start moving in a direction (droite, 7, relative) set variable ismoving_left to 0 set variable ismoving to 0 } Sachez que le 7 est une valeur arbitraire, vous pouvez la changer à tout moment pour moduler la vitesse de votre raquette. Par contre n'oubliez pas que la vitesse lors du pressage de touche doit être l'opposée de celle lors du release. Pour faire le déplacement vers la droite il suffit d'inverser la puissance de déplacement et de remplacer tout les ismoving_left, par des ismoving_right. Et voilà vous n'aurez plus à toucher la raquette.à vous n'aurez plus à toucher la raquette.)
  • Casse brique game Maker  + (Comme pour les sprites, vous allez devoir Comme pour les sprites, vous allez devoir créer un objet par élément de votre jeu. Nous allons d'abords créer chaque objet (raquette, mur, brique, balle), c'est important de créer chaque objet avant de commencer à les paramétrer en profondeur. Une fois chaque objet créer nous allons nous intéresser à la raquette. Tout d'abord dans l'évenement create de votre raquette, initialisez quatre variables : * nb_brique à 0 * ismoving_right à 0 * ismoving_left à 0 * ismoving à 0 la première servira à savoir s'il reste des briques sur le terrain et les trois autres seront utiles pour le contrôle des mouvement de la raquette. sur l'évènement Step, entrez l'algorithme suivant : si nb_brique = 0 { alors restart la room; } ensuite créer un évènement "collision avec mur", et mettez comme le "bounce" avec les paramètre suivant : appliquer aux autre, précision précise, et rebondir sur tous les objet. maintenant passons aux mouvement : pour tout ce qui concerne la gauche, créez un évènement left pressed et left released. Dans left pressed, implantez l'algo suivant : si ismoving =0 { start moving in a direction (droite, force -7, relative) set variable ismoving_left to 1 set variable ismoving to 1 } Ce bout de code signifie, que si la raquette ne bouge alors elle commence à se déplacer à gauche lorsque l'on appuie sur la flèche de gauche, il permet aussi d'empécher certain bug si jamais la flêche droite et la flèche gauche sont appuyées en même temps. Pour left released le code ressemblera à ça : si ismoving_left = 1 { start moving in a direction (droite, 7, relative) set variable ismoving_left to 0 set variable ismoving to 0 } Sachez que le 7 est une valeur arbitraire, vous pouvez la changer à tout moment pour moduler la vitesse de votre raquette. Par contre n'oubliez pas que la vitesse lors du pressage de touche doit être l'opposée de celle lors du release. Pour faire le déplacement vers la droite il suffit d'inverser la puissance de déplacement et de remplacer tout les ismoving_left, par des ismoving_right. Et voilà vous n'aurez plus à toucher la raquette.à vous n'aurez plus à toucher la raquette.)
  • Team Ace - Unilag  + (Upon sign up to the ACE app, the user is asked to provide information detailing their location, estimates of gas, fuel, electricity per month. These values are used to approximate the tonnes of carbon and other CFCs emitted by the user. <br/>)
  • Team Ace - Unilag  + (Upon sign up to the ACE app, the user is asked to provide information detailing their location, estimates of gas, fuel, electricity per month. These values are used to approximate the tonnes of carbon and other CFCs emitted by the user. <br/>)
  • Glowing LED Butterfly  + (Use TinkerCad to design the component thatUse TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
  • Nutridome I SDG 11 I South Africa  + (This is a PVC pipe that has been drilled wThis is a PVC pipe that has been drilled with holes we were going to use disposable plastic cups but we found some plastic growing cups in the store room and we used those. for this demonstration we are using an ordinary aquarium pump and pipes for the water flow. The bucket is just a normal bucket. The dome was made from 25mm PVC electrical wiring pipes. The dome was inspiration for the idea as we saw it at the Centre and realised its potential. the PVC pipes are held together with cable ties, glue and connectors. The shading is normal garden shade and plastic sheeting can be placed over the structure to create more controlled environments. This will be when you have put the hydroponic system with lighting inside the dome we just wanted to illustrate the look for the final product of the dome.he look for the final product of the dome.)
  • Light sensitive e-textile bag  + (We will be using S4A to program the board.We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
  • Light sensitive e-textile bag  + (We will be using S4A to program the board.We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
  • Empty room activity v12  + (What you need[https://docs.google.com/docuWhat you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
  • Brightness control activity v12  + (What you need[https://docs.google.com/docuWhat you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
  • How to Add Subtitles to YouTube Video  + (With [https://www.joyoshare.com/video-joinWith [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] downloaded and installed on your desktop, double-click to launch it. At the bottom left, click the "Open File" to browse your local file and select the target YouTube video. You can also drag your video to its interface quickly and simply.video to its interface quickly and simply.)
  • Cardboard Cable Car Model With Recycled Materials, Working Model 250rpm Electric Motor and Basic Slide Switch ON-OFF-ON (School Science Project)  + (You can check all steps on video briefly or follow below steps. • Mount plastic pulley wheel onto DC motor shaft and glue on it.)
  • How to Save Spotify Music Tracks without a Premium  + (You can convert Spotify songs using either the Web player mode or the App mode.)
  • SunZilla - Guide 5: Assembling solar panels frames  + (You can find the positions and diameter ofYou can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
  • DHT11 with ESPNOW  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] toget them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • AWS IoT Core IoT Platform Series - 6  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Neo Pixels Ring with Arduino Nano  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here. U]sing this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
  • Node Red with Raspberry Pi  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Ethernet-Enhanced LoRa Gateway Minimizing Delay  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
  • Getting Started with ESP-NOW  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • M5Stick C Captive Portal  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Line Follower Robot - King of Maze  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Node Red Controlled Web LED on ESP32 with Raspberry Pi 4  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
  • Water Quality Monitoring System Based on IOT  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Node Red Controlled Neo Pixel on Raspberry Pi 4  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Getting Started with TivaWare Launchpad - Basics  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Temperature Control Neo Pixels with Arduino Nano  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here]. Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
  • ESP32 DHT22 IFTTT  + (You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny: *Go to https://thonny.org/ *Download *Install and then open)
  • Marble Machine No 1 Motor Assembly Instructions  + (The parts can be glued together in one go The parts can be glued together in one go and the parts held in place with rubber bands  The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
  • Analogic Drawing Pad  + (You will need to draw 10 pulleys in total.You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
  • Analogic Drawing Pad  + (You will need to draw 10 pulleys in total.You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
  • Pet that lights up upon interaction  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Pet that lights up upon interaction  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Simple Train Blocking System  + (You'll need to cut the rails or isolate thYou'll need to cut the rails or isolate them to make sure each block is independent. The last track is the security track and is isolated from the rest. The sticker on the plaque is right on the security track. What you see before is the main track (stop zone) and what you see after is the stop zone of the next block. after is the stop zone of the next block.)
  • DIY Solar Charger  + (Connect the positive pin of the first capacitor to the join the diode, resistors and the left pin of the regulator)
  • ASKotec Tutorials - DIY Simple analog synth  + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
  • ASKotec Tutorials - DIY Simple analog synth  + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
  • ESP32 HC-SR04 Ultrasonic IFTTT  + (<nowiki><br/><div class="mw
    import machine
    import time
    import urequests
    import network

    # Wi-Fi credentials
    ssid = 'wifi_name' #input your own wifi name
    password = 'password' #input your own password

    # IFTTT webhook key
    api_key = 'your_own_key' #input your own key

    # Connect to Wi-Fi
    station = network.WLAN(network.STA_IF)
    station.active(True)
    station.connect(ssid, password)
    while station.isconnected() == False:
    pass
    print('Connection successful')
    print(station.ifconfig())

    # Set up ultrasonic sensor
    trigger = machine.Pin(4, machine.Pin.OUT)
    echo = machine.Pin(5, machine.Pin.IN)


    def main():
    while True:
    # Send trigger pulse
    trigger.value(0)
    time.sleep_us(5)
    trigger.value(1)
    time.sleep_us(10)
    trigger.value(0)

    # Measure duration of echo pulse
    while echo.value() == 0:
    start = time.ticks_us()
    while echo.value() == 1:
    end = time.ticks_us()
    duration = time.ticks_diff(end, start)

    # Calculate distance
    distance = duration * 0.034 / 2


    # Send data to IFTTT
    data = {'value1': distance}
    submitData("ultrasonic_distance", data)


    # Delay before next measurement
    time.sleep(5)

    def submitData(event, data):
    try:
    print('Sending data to IFTTT:', data)
    request_headers = {'Content-Type': 'application/json'}
    request = urequests.post(
    'https://maker.ifttt.com/trigger/'+ event + '/with/key/' + api_key,
    json=data,headers=request_headers)
    print(request.text)
    request.close()
    except OSError as e:
    print('Failed to send data to IFTTT.', e)

    if __name__ == '__main__':
    main()
    )<br /> request.close()<br /> except OSError as e:<br /> print('Failed to send data to IFTTT.', e)<br /> <br />if __name__ == '__main__':<br /> main()</pre></div></nowiki>)
  • Virtual Fence - Anti Theft Device  + (<nowiki>A Fence is a physical boundaA Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located.

    This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''


    The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.

    But before we get started -
    e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
  • How to Delete Tidal Account Permanently without Subscription  + (<nowiki>If you are using Apple produIf you are using Apple products such as iOS devices, you will find a Delete Account option on your iOS Tidal app. Just follow the steps below to close Tidal account permanently.


    Step 1. Open the Tidal app on your iPhone.

    Step 2. Tap the top-right '''gear''' icon from the '''My Collection''' section to go to Tidal '''Settings'''.

    Step 3. Scroll down and choose ''''Manage account''''.

    Step 4. On the new screen, tap the bottom ''''Delete account'''' option.


    gt;Step 4. On the new screen, tap the bottom ''''Delete account'''' option.<br /><br /><br/></nowiki>)
  • How to Set Tidal Sleep Timer  + (<nowiki>If you are using an Android If you are using an Android phone, you need to install a professional Sleep Timer app from the Google Play store on your Android device and then create a sleep timer according to your needs. Now, look at the steps below.

    '''Step 1.''' Download ''''Sleep Timer (Turn music off)'''' on your Android from Google Play.

    '''Step 2.''' Launch the app and tap on the three vertical dots in the top right corner of the home screen.

    '''Step 3.''' On the '''Setting''' menu, click ''''Player to launch on start'''' and select ''''Tidal'''' from the app list.

    '''Step 4.''' Go back to the '''Settings''' menu and then choose ''''On sleep'''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.
    ''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.</nowiki>)
  • Qubitro Device Data - IoT Platform Series  + (<nowiki>To get started with Qubitro,To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account.


    Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account.
    shall automatically be logged in to our account.</nowiki>)
  • 3D CNC milling avec CAM Fusion 360  + (<section class="step"><br />Be

    Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.

    3D Toolpathing

    If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.

    When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.

    Workholding

    Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.

    When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.

    But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.

    In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.

    Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.

    For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.

    Registration

    Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.

    If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.

    This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:

    --Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed

    --Machining a contour into your spoiler board, then placing your stock exactly inside that contour

    --Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)

    This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.

    CAM Settings

    The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths.


    
-Tool numbering

    If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.

    Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.

    If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.

    -Rules for roughing

    Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.

    When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.
    lt;br />Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.<br /><br />When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.<br /></section>)
  • Bento Red Room  + ('''3D Printing''' * Filament: PVA and ABS'''3D Printing''' * Filament: PVA and ABS * Wood '''Electronic''' * 1 Arduino Uno cards * male-male and male-female prototyping cables * LCD SSD1306 128 x 64 * 1 LED 8mm * 2 ring of 12 LEDs * 1 potentiometer * 1 BME280 weather sensor * 1 switch * 1 x 5V power supply * 220 and 10000 Ohms resistors * 3 x servomotors * Buzzer === Tools === '''Machines''' * 3D printer * Découpeur de laser '''Software''' * Tinkercad, Microsoft 3D builder, Blender * Cura Ultimaker * Arduino '''Prototyping''' * soldering iron * cutting pliers * wire stripper * glueon * cutting pliers * wire stripper * glue)
  • Bento Night Sky  + ('''3D Printing''' *Filament: PVA and ABS '''3D Printing''' *Filament: PVA and ABS *Wood '''Electronic ''' *1 Arduino Uno cards *male-male and male-female prototyping cables *LCD SSD1306 128 x 64 *1 LED 8mm *2 ring of 12 LEDs *1 potentiometer *1 BME280 weather sensor *1 switch *1 x 5V power supply *220 and 10000 Ohms resistors *3 x servomotors *Buzzer ===Tools=== '''Machines''' *3D printer *Découpeur de laser '''Software ''' *Tinkercad, Microsoft 3D builder, Blender *Cura Ultimaker *Arduino '''Prototyping''' *soldering iron *cutting pliers *wire stripper *glue iron *cutting pliers *wire stripper *glue)
  • How to Share Spotify Song on Snapchat  + ('''''Q: Is there a way to share and at the'''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
  • Bentolux a code  + ('''Matériaux :''' *contreplaqué de peupli'''Matériaux :''' *contreplaqué de peuplier 3mm 800*500mm (pour 2 boîtes) *colle à bois *serre-joint *Filament PLA pour les supports écran OLED et LCD (cf fichier joint) *tapis de découpe (pour garder un plan de travail propre) '''Electronique''' : *Une carte Arduino Uno *4 borniers wago *Un moteur solenoide 6 volts *Un keypad 4x3 *Un écran LCD *Un connecteur de pile 9V *Une diode 1N4004 *Une résistance de 2,2k (ou 1k) *Un transistor TIP102 *Un anneau 12 LED neopixel '''Machines :''' * Découpeuse laser Perez Camp 13/90 * Imprimante 3D Creality ender3 '''Logiciels''' : * Tinkercad * Arduino IDE * Ultimaker Cura* Tinkercad * Arduino IDE * Ultimaker Cura)
  • Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou'''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
  • Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou'''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
  • How to Allow or Block Apple Music Explicit Content  + ('''Step 1.''' Go to '''Settings''' on your'''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
  • Wio WM1110: Quick Start Guide for Seamless Integration  + ('''This guide explains the steps to seamle'''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
  • VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you'''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
  • VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you'''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
  • NEXT ENGINE 3D SCANNER :How to use it  + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA'''  5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
  • TOLOU SENFABLAB  + ( * Fer à souder + étain * Pistolet à colle * Multimètre * Pince coupante * Imprimante 3D )
  • FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
  • FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
  • Maker' pot  + (- '''3.1 les composants''' * 1 Feather Hu- '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
  • Maker' pot  + (- '''3.1 les composants''' * 1 Feather Hu- '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
  • Jeu puissance 4 fait en bois  + (Après avoir tout découpé, vérifier que les différentes parties s’emboîtent correctement. Modifier le .Gcode si nécessaire.)
  • PP Shredder Basic  + (1/2" Socket wrench 11/16" Socket" 6mm Allen/Hex Wrench Locking Pliers Adjustable pliers Metal File Screwdriver <br/>)
  • Biped dancing robot  + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
  • Biped dancing robot  + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
  • Geiger counter 12+  + (<u>https://world-nuclear.org/nuclearhttps://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
  • Geiger counter 9-11  + (<u>https://world-nuclear.org/nuclearhttps://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
  • Thermostat control activity v12  + (== What you need[https://docs.google.com/d== What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
  • Implementing Web Server on ESP32  + (=== What is a Web Server? === A web server=== What is a Web Server? === A web server is a software application that serves web pages to users. When a user requests a web page, the web server processes the request and sends the requested page back to the user’s browser. This forms the backbone of data communication on the World Wide Web. === What is ESP32? === The ESP32 is a series of low-cost, low-power systems on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor and includes built-in antenna switches, an RF balun, a power amplifier, a low-noise receiver amplifier, filters, and power management modules. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming.e demanding tasks such as music streaming.)
  • PP Extruder Pro  + (==== Tools ==== 1/2" Socket ==== Parts ====== Tools ==== 1/2" Socket ==== Parts ==== 2x 1000mm 4080 extrusion 4x 300mm 4040 extrusion 40x t-nuts 22x M8x20 bolts 22x M8 Washers 12x Corner Brackets
    ==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)
    uts. (as seen in the right two beams in image 3))
  • LoRa Direct  + (If you are a LoRaWAN gateway provider or owner you can update details about your device, coverage and/or add comments for the public)
  • FLAC Joiner to Join FLAC Files in Original Quality  + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
  • Guide on how to Permanently Add Subtitles to MP4  + (After downloading and installing Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner], run it. Then you can add MP4 files to Joyoshare with 2 ways: Drag and drop MP4 video to the left screen; Select from the local folder.)
  • Manipulate the CubePro Trio  + (After downloading the program and installing it using it's serial number and activating it, we must launch the program.)
  • How to Play Spotify on Squeezebox  + (After opening this [https://www.tuneskit.cAfter opening this [https://www.tuneskit.com/spotify-music-tips/download-spotify-playlist-to-mp3.html Spotify to MP3 downloader], Spotify will be automatically started. Then you can search and find the Spotify track or playlist you want to play on Squeezebox and drag them to the screen of this Spotify Music Converter directly.o the screen of this Spotify Music Converter directly.)
  • Tidal Alexa - How to Add Tidal to Alexa  + (After the installation, please double-clicAfter the installation, please double-click to start [https://www.audfree.com/tidal-music-converter-win/ AudFree Tidal Music Downloader]. And then, the Tidal app will open automatically. Find Tidal songs that you want to play on Alexa, copy and paste the link of Tidal track in the search bar of AudFree's main interface, and click "+" for loading.main interface, and click "+" for loading.)
  • How to Play Spotify to Yoto Player without Premium  + (<nowiki>Once the Spotify music you wOnce the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music.


    '''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.

    '''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.

    '''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.

    '''Step 4.''' Select ''''Add Audio'''' from the options.

    '''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.

    '''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).

    '''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.

    '''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.


    ' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.<br /><br /><br/></nowiki>)
  • Jeu questions/réponses système solaire  + (Avec la brodeuse numérique, reprendre les dessins déjà réalisés, puis lancer la brodeuse.)
  • Showerloop - Guide 3: Connecting the pipes  + (Basics - heat up your copper pipe with a bBasics - heat up your copper pipe with a blowtorch. Focus the flame on the areas above and below where you will do the bending so that part doesn’t get hotter and thus weaker than the rest of the steel. Once the copper turns blackish and starts making a cool psychedelic rainbow effect you know the copper is warm enough to begin bending. Turn off the flame and wait a moment. Once the pipe has cooled a little use the pipe bending tool so make an appropriate bend. This is more craft than technical skill and you just have to observe and see how the metal flexes.
    Don’t put too much pressure on one spot, this may result in a distorted pipe. You want to keep the diameter of the inner pipe as even as possible. Use a pipe bending tool.
    r of the inner pipe as even as possible. Use a pipe bending tool.</div> </div>)
  • Showerloop - Guide 3: Connecting the pipes  + (Lay out all the filter components onto a surface. Using common sense and a ruler you can centre everything perfectly.)
  • ESP32 MQTT  + (<nowiki>Copy the full code into yourCopy the full code into your IDE. Feel free to change things like the text it prints, etc


     1 #include 
    2 #include
    3
    4 // WiFi
    5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
    6 const char *password = "xxxxx"; // Enter Wi-Fi password
    7
    8 // MQTT Broker
    9 const char *mqtt_broker = "broker.emqx.io";
    10 const char *topic = "emqx/esp32";
    11 const char *mqtt_username = "emqx";
    12 const char *mqtt_password = "public";
    13 const int mqtt_port = 1883;
    14
    15 WiFiClient espClient;
    16 PubSubClient client(espClient);
    17
    18 void setup() {
    19 // Set software serial baud to 115200;
    20 Serial.begin(115200);
    21 // Connecting to a WiFi network
    22 WiFi.begin(ssid, password);
    23 while (WiFi.status() != WL_CONNECTED) {
    24 delay(500);
    25 Serial.println("Connecting to WiFi..");
    26 }
    27 Serial.println("Connected to the Wi-Fi network");
    28 //connecting to a mqtt broker
    29 client.setServer(mqtt_broker, mqtt_port);
    30 client.setCallback(callback);
    31 while (!client.connected()) {
    32 String client_id = "esp32-client-";
    33 client_id += String(WiFi.macAddress());
    34 Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
    35 if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
    36 Serial.println("Public EMQX MQTT broker connected");
    37 } else {
    38 Serial.print("failed with state ");
    39 Serial.print(client.state());
    40 delay(2000);
    41 }
    42 }
    43 // Publish and subscribe
    44 client.publish(topic, "Hi, I'm ESP32 ^^");
    45 client.subscribe(topic);
    46 }
    47
    48 void callback(char *topic, byte *payload, unsigned int length) {
    49 Serial.print("Message arrived in topic: ");
    50 Serial.println(topic);
    51 Serial.print("Message:");
    52 for (int i = 0; i < length; i++) {
    53 Serial.print((char) payload[i]);
    54 }
    55 Serial.println();
    56 Serial.println("-----------------------");
    57 }
    58
    59 void loop() {
    60 client.loop();
    61 }
    i">0</span><span class="p">;</span> <span class="n">i</span> <span class="o"><</span> <span class="n">length</span><span class="p">;</span> <span class="n">i</span><span class="o">++</span><span class="p">)</span> <span class="p">{</span><br /><span class="lineno">53 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">print</span><span class="p">((</span><span class="kt">char</span><span class="p">)</span> <span class="n">payload</span><span class="p">[</span><span class="n">i</span><span class="p">]);</span><br /><span class="lineno">54 </span> <span class="p">}</span><br /><span class="lineno">55 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">();</span><br /><span class="lineno">56 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">(</span><span class="s">"-----------------------"</span><span class="p">);</span><br /><span class="lineno">57 </span><span class="p">}</span><br /><span class="lineno">58 </span><br /><span class="lineno">59 </span><span class="kt">void</span> <span class="nf">loop</span><span class="p">()</span> <span class="p">{</span><br /><span class="lineno">60 </span> <span class="n">client</span><span class="p">.</span><span class="n">loop</span><span class="p">();</span><br /><span class="lineno">61 </span><span class="p">}</span><br /></pre></div></nowiki>)
  • Water probe 12+ activities  + (Begin by soldering the male pin header strBegin by soldering the male pin header strip onto the PCB board. You need to cover at least 10 points of the PCB (see figure below). Next, solder the 1kohm resistor to the PCB. We soldered one end to n°6, the other end to n°9. This way, when the PCB will be mounted on the arduino uno board, one end of the resistor will connect to A0, the other one to GND. Next, cut two pieces of electric wire, each about 20 cm long. The length doesn’t really matter, however, longer wires will enable you to distance the arduino board further away from liquids. Solder one end of one wire to one end of the resistor. This will connect to A0 on the board. Solder the other end to n° on the PCB. The latter will then connect with A5 on the arduino uno board. Strip off the other ends of the electric wire you just soldered onto the PCB, and connect them to the top of the binding post. Now cut two short pieces of electric wire (about 10 cm long each), and strip off both ends of each wire. Connect one end of each to the bottom part of the binding post. Curl the other end of each wire. The curly ends are the one which will dive into the liquid.e the one which will dive into the liquid.)
  • Atelier pour Arrosage automatique et autonome  + (Choix notés ce soir: * quel type de pompe Choix notés ce soir: * quel type de pompe ? (s'assurer qu'elle peut aller jusqu'au bout du mur) * batterie rechargeables ou pas ? * arrosage sur ou sous terre * circuit électronique simple, ou nano, ou nodemcu (rester dans du "standard") * quel panneau solaire? Doit-il pouvoir alimenter le moteur directement, ou faut il passer par des batteries pour avoir assez de puissance? Il y a même des tutos sur des [https://www.electronicshub.org/solar-battery-charger-for-18650/ circuits de recharge utilisant un simple TP4056] connecté au panneau et à la batterie! Est-ce sérieux? (Autre composant apprécié : J5019) Ci-joint un panneau que j'ai, de 12V , 3,5W, 290mA.un panneau que j'ai, de 12V , 3,5W, 290mA.)
  • Musical e-textile bag  + (Connect one end of the micro USB cable to Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
  • Musical e-textile bag  + (Connect one end of the micro USB cable to Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
  • E-textile blinking bag  + (Connect one end of the micro usb cable to Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
  • E-textile blinking bag  + (Connect one end of the micro usb cable to Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
  • Connected weather station  + (Connect the sensors as follows: '''Light Connect the sensors as follows: '''Light sensor''' One end to 3V the other end to the 10kohm resistor which in turn is connected to GND. the same end of the LDR is also connected to pin D34 on the ESP32 '''CJMCU CCS811''' 3V →3V on the ESP32 board GND→ GND SDA→D21 pin on ESP32 SCL→D22 pin on ESP32 WAKE→GND '''DHT11''' GND→GND on ESP32 VCC→3V on ESP32 OUT→D34 on ESP32n ESP32 VCC→3V on ESP32 OUT→D34 on ESP32)
  • Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com.Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
  • Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com.Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
  • Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
  • Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
  • Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
  • Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
  • Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
  • Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
  • Spinning Kinetic Sculpture RGB  + (Cut the first svg file on 2 sheets of 300cCut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
  • Cyclo Projecteur  + (Dans cette étape je vais vous décrire commDans cette étape je vais vous décrire comment j'ai réalisé les deux enceintes pour le projet
    *Réalisation du plan svg que j'ai réalisé sous un logiciel gratuit Inkscape avec les réservations une prise banane, un trou pour l'aération de l'enceinte et une réservation pour la membrane de l'enceinte. (vous trouverez dans l'onglet fichiers le fichier SVG en question) *Découpage laser sur une planche de bois en peuplier épaisseur 5 mm *Vernissage des éléments découpés *Assemblage des éléments avec de la colle à bois, j'ai laissé la partie inférieure non collée pour accéder à l'enceinte en cas de soucis technique *mise en place de la membrane et de la prise banane *Branchement du fil rouge sur la prise rouge *Branchement du fil noir sur la prise noire
    *Branchement du fil noir sur la prise noire<br/>)
  • How to Play Spotify on iPod Touch  + (Download AMusicSoft Spotify Music ConverteDownload AMusicSoft Spotify Music Converter to your Mac/Windows. You can download it via the [https://www.amusicsoft.com/spotify-music-converter/ AMusicSoft website]. Then dragging and dropping the songs, playlists, or albums you wish to download towards the interface of the AMusicSoft Spotify Music Converter.of the AMusicSoft Spotify Music Converter.)
  • DIY Solar Charger  + (Draw the diagram of the charger)
  • Kairos  + (Numérisation (scanner) du dessin et import dans Inkscape)
  • Kairos  + (Numérisation (scanner) du dessin et import dans Inkscape)
  • SunZilla - Guide 3: Solar box  + (First, connect the 25 mm wide vertical profiles with the 2 long 15 mm wide horizontal profiles, like you can see in the following photos.)
  • SunZilla - Guide 3: Solar box  + (First, connect the 25 mm wide vertical profiles with the 2 long 15 mm wide horizontal profiles, like you can see in the following photos.)
  • How to Listen to Apple Music on Garmin Forerunner Watch  + (First, download and install TunesKit Apple Music Converter on your computer. Download link for Windows users: https://www.tuneskit.com/download/AudioConverter.exe Download link for Mac users: https://www.tuneskit.com/download/AudioConverter.dmg <br/>)
  • Snap circuits tutorial  + (First, you will need to 3D print the snap First, you will need to 3D print the snap part. The stl file ready for 3D printing is available [https://drive.google.com/open?id=1N1k6RxDnZtbSd_nBgNX-ozBYsEIFRAkR here]. You can also tweak this design on [https://www.tinkercad.com/things/kYg3F6El7xx tinkercad] and make it suitable to hold 3-legged components (ex. temperature sensor, light sensor). A timelapse of the 3D printing process is available [https://drive.google.com/open?id=1GYF9cHVUO8Ps6hyx0DX7T5qe3AmTDtcx here].google.com/open?id=1GYF9cHVUO8Ps6hyx0DX7T5qe3AmTDtcx <u>here</u>].)
  • Lossless Way to Merge MP4 Files on Windows 10  + (Firstly, download the Windows version of JFirstly, download the Windows version of Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] and install it on desktop. Then, double-click its icon to open it and simply drag all MP4 files you need to combine to its interface. Alternatively, you can do it by touching "Open File" in the lower left corner.hing "Open File" in the lower left corner.)
  • How to Combine MOV Files with Zero Loss  + (Firstly, you need to install Joyoshare [htFirstly, you need to install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on your computer. Then run it and add your MOV files. To add the files, you can directly drag it to the certain position as the screen instructs or click the lower-left corner button to open files to choose.eft corner button to open files to choose.)
  • Salad tongs  + (For the functional tongs, I use a large chFor the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
  • Salad tongs  + (For the functional tongs, I use a large chFor the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
  • Top Way to Rotate YouTube Video with Ease  + (Get Joyoshare [https://www.joyoshare.com/video-cutter-win/ Video Cutter for PC] from the official download page. Simply run it and import your YouTube video. You are able to add with "Open" button or instantly drag and drop to the program.)
  • TS Joiners to Combine TS Files without Re-encoding  + (Get your computer equipped with the [https://www.joyoshare.com/video-joiner/ video joiner]. From its main screen, find "Open File" to import TS files from local folder. Simply, drag and drop your TS videos to the specified area.)
  • MoodBoxByFaBteam  + (Goal was to create a new tier to the origiGoal was to create a new tier to the original box by using laser cutting of course but also laser engraving. An engraving pattern was found. This image file was reproduced using Inkscape and Beziers curves. This newly designed pattern was then added to the cutting pattern.ern was then added to the cutting pattern.)
  • MoodBoxByFaBteam  + (Goal was to create a new tier to the origiGoal was to create a new tier to the original box by using laser cutting of course but also laser engraving. An engraving pattern was found. This image file was reproduced using Inkscape and Beziers curves. This newly designed pattern was then added to the cutting pattern.ern was then added to the cutting pattern.)
  • PP Shredder Pro  + (<nowiki>====Tools====<br />non====Tools====
    none
    ====Parts====
    1110.08 - Bearing Side Plate 4

    1110.09 - Bearing Side Plate 5

    1110.10 - Bearing Side Plate 6

    1110.11 - Gear Plate

    1110.01 - Top Plate

    ====Steps====

    #Layout the remaining pies as seen in image 1.
    #Slide plate 1110.08 directly on top of piece 1110.07
    #Drop in plate 1110.09 directly next to 1110.07/.08 in the open tabs.
    #Place the bottom tabs of plate 1110.10 into the bottom plate, and then fold the plate upwards into place.
    #Place plate 1110.11 on top as seen in image 5.
    #Place plate 1110.01 on top, securing the entire box in place.

    *Note - in the next steps, you will dismantle these last few steps, but it is important to understand how the box comes together.


    t;br /><br/></nowiki>)
  • How to Edit TikTok Video After Posting  + (Have you ever uploaded a video on TikTok tHave you ever uploaded a video on TikTok then realized that there’s still something left in your video? If you did, then you may be wondering how to edit caption on TikTok video after posting it. The bad news is, you can’t directly edit the video that has already been uploaded on TikTok. But there still are some workarounds that enable you to re-edit your TikTok video, keep reading. = Download & Repost = You can’t edit a TikTok video once it’s posted. One of the solutions is that you can save it to your phone and repost it. Here’s how to do it: '''Step 1:''' Launch TikTok on your phone and tap the “Profile” button in the bottom right corner of the screen. '''Step 2:''' Select a TikTok video that you already posted. Then tap the “Save Video” button. This step will save all the things you’ve added to your video including effects and background music. '''Step 3:''' Then, go to the main interface of TikTok and then press the “+” icon and then upload the video that you saved from your phone. '''Step 4:''' Now you can re-edit your video such as adding a caption, music or some more effects. After editing, you can upload the video again and delete the original post. = Re-upload Your Video = If you found some typos or other effects that can’t be deleted in your post, you can delete the original post and upload your video again. '''Step 1:''' Open TikTok on your phone and tap on the + button to create a new post. '''Step 2:''' Next to the Record button, tap on the Upload button. Then select the video you want to upload. '''Step 3:''' You can now add new effects and music to your video. After the editing, you can upload the video as a new post.
    can upload the video as a new post. <br/>)
  • Visual Gesture Controlled IoT Car  + (Have you watched the movie 'Project AlmanaHave you watched the movie 'Project Almanac'? Which was released in the year 2015. If not, then let me brief you a scene about it. In the movie, the main character wishes to get into MIT and therefore, builds a project for his portfolio. The project was about a drone, that could be controlled using a 2.4GHz remote controller, but when the software application on the laptop was run, the main character was seen controlling the drone with his hands in the air! The software application used a webcam to track the the movement of the character's hand movements.ovement of the character's hand movements.)
  • Mosquitto MQTT - IoT Platform Series  + (Here, there are 2 sections - '''Publish anHere, there are 2 sections - '''Publish and Subscribe'''. And then there is a middleman - '''Broker'''. Let us see in depth * IoT Devices play the role to collect sensor data and send to the cloud (broker). While '''PC''' '''/''' '''Server''' '''/''' '''Mobile devices''' play the role to monitor and receive the sensor data to be viewed - Here, '''IoT Device''' is a '''Publisher''', and '''PC Devices''' are '''Subscriber'''.
    [EXAMPLE] When a '''user1''' publishes an image on social media, then only the '''user2''' subscribed to '''user1''' can view/receive the image. Here, the '''user1''' is the '''PUBLISHER''', '''user2''' is the '''SUBSCRIBER''', and the '''user1's account''' is the '''BROKER'''.
    * According to the above analogy, the image that is published is the data, that was '''transferred from user1 to user2''' 📤. And that is the exact scenario in an MQTT Pub/Sub model. * We have a more secure layer 🔒 to make sure the data is shared t'''hrough a specific path, we call th'''at 'topic', When use'''r1''' publishes data on topic, the subscriber automatically receives if already connected to the broker. Hence, t'''he''' LOW latency.
    connected to the broker. Hence, t'''he''' LOW latency.)
  • Home Assistance on Raspberry Pi  + (Home Assistant is a free, open-source, andHome Assistant is a free, open-source, and lightweight home automation software that runs on top of [https://github.com/home-assistant/operating-system Home Assistant Operating System.] Home Assistant OS can be installed and configured on Raspberry Pi 4, which is a low-power and compact device for running Home Assistant.compact device for running Home Assistant.)
  • Is it possible to replace the WR3 module with an ESP-12 module  + (This shows the top and bottom side)
  • Getting Started with 3.5 Inch PC State Display  + (If you are a PC enthusiast, you might wantIf you are a PC enthusiast, you might want to monitor the performance and status of your PC components, such as CPU, GPU, RAM, SSD, HDD, temperature, fan speed, etc. However, opening the task manager or third-party software every time you want to check this information can be inconvenient and distracting. Moreover, you might not be able to see this information when you are gaming or doing other full-screen activities. That’s why a 3.5-inch PC state display can be a great addition to your PC setup. A 3.5-inch PC state display is a small screen that can be mounted on your PC case and display various information about your PC state. It can show you the CPU model, usage, frequency, temperature, fan speed, GPU model, usage, frequency, temperature, fan speed, RAM usage, SSD/HDD usage, network speed, IP address, weather forecast, and custom information. You can also choose from different themes and orientations to suit your preferences. A 3.5-inch PC state display can help you monitor your PC state at a glance, without interrupting your workflow or gaming experience. It can also enhance the aesthetics and functionality of your PC case, making it more personalized and attractive. Whether you are a gamer, a streamer, a content creator, or a professional, a 3.5-inch PC state display can be a useful and fun tool for your PC. In this article, I will show you how to get started with a 3.5-inch PC state display, how to install it, how to customize it, and how to use it. Let’s begin!tomize it, and how to use it. Let’s begin!)
  • Node-Red Telegram Bot with Temperature Logger Part-1  + (In this article, I will show you how to usIn this article, I will show you how to use Node-RED and Telegram bot to send temperature data from a DHT11 sensor connected to a Raspberry Pi. You will be able to ask your Telegram bot for the current temperature and receive a reply with the sensor reading. You will also be able to set up a notification system that will alert you when the temperature exceeds a certain threshold. To follow this tutorial, you will need the following components: * A Raspberry Pi with Node-RED installed (you can follow [https://nodered.org/docs/getting-started/raspberrypi this guide] to install Node-RED on your Raspberry Pi) * A DHT11 temperature and humidity sensor * A Telegram account and a Telegram bot token (you can follow [https://core.telegram.org/bots this guide] to create a Telegram bot and get its token)o create a Telegram bot and get its token))
  • Casa OS with Raspberry Pi  + (In this tutorial I will show you how to buIn this tutorial I will show you how to build a beautiful home server with Raspberry Pi and Casa OS. '''Things Needed:''' All you need is a Raspberry Pi 4B board, That's all. Casa OS is a simple, easy-to-use, elegant open-source home cloud system that allows you to run self-hosted apps on your Raspberry Pi or other Linux devices. You can manage your files, share them across the network, protect your privacy data, and freely add disks and expansion spaces. Casa OS also has an app store with over 20 pre-installed docker based apps and 50+ community-verified apps. If you want to try out the casa os before the installation, use the [http://demo.casaos.io/#/login demo site].
    Username is casaos, and the password is also same.
    CasaOS fully supports Raspberry Pi. Also, more computers and development boards and fully compatible with Ubuntu, Debian, Raspberry Pi OS, and CentOS with one-liner installation.
    spberry Pi OS, and CentOS with one-liner installation.)
  • Energy module for People Pedal Power  + (You can chose between different buffering You can chose between different buffering systems, an battery, a supercapacitor or a flywheel. We chose a supercapacitor. A supercapacitor is an electronic component able to hold a charge. It can be used in the same function as batteries with the following differences : + a capacitor is easier to recycle than most batteries (references will follow). + a capacitor can provide and absorb a higher peak power. – the voltage varies with the charging state of the capacitor (it needs an additional converter to provide the voltage of the system) – the energy by weight capacity is less interesting than with batteries. – the cost by energy is higher. – the lifetime is quasi infinite (1M cycles). The energy storage of a supercapacitor : energy = 1/2 * C * voltage difference^2 http://www.engineeringtoolbox.com/capacitors-energy-power-d_1389.html ex = 1/2 * 500F * (16-12)^2 = 4000J = 1.11Wh = 1 cyclist for 1min20sec http://www.maxwell.com/products/ultracapacitors/16v-large-modules/documentsltracapacitors/16v-large-modules/documents)
  • Capteur biodata, écoute des plantes avec un Smartphone  + (Installer deux programmes sur votre SmartpInstaller deux programmes sur votre Smartphone androïde, permettant de réceptionner le signal bluetooth transmis par le ESP32 et de le traiter tel une signal MIDI, puis de pouvoir traiter ce son via une application synthétiseur. Voici notamment bluetooth MIDI connect : https://play.google.com/store/apps/details?id=bluetooth.midi.connect&hl=fr&gl=US Et FluidSynth MIDI : https://play.google.com/store/apps/details?id=net.volcanomobile.fluidsynthmidi&hl=fr&gl=US
    et.volcanomobile.fluidsynthmidi&hl=fr&gl=US <br/>)
  • EMI probe  + (It is possible to assemble an EMI probe usIt is possible to assemble an EMI probe using an arduino Uno or an arduino nano. A timelapse of the assembly process of an EMI probe based on arduino nano. A video of the assembly process of an EMI probe based on arduino uno ''wiring diagram for the EMI probe'' To begin with, solder 3 male headers on the PCB. When you will plug the PCB onto the arduino board, the headers will have to go into pin 9, GND, and Analaog5. Solder the speaker onto the PCB. The positive leg of the speaker need to be connected to the male header going into pin 9 of the arduino board. The other leg (negative leg) of the speaker needs be connected to one end of the resistor (via some hook up wire). Now, solder the resistor onto the PCB. Connect one end of the resistor to the male header going into GND on the arduino board. Connect the other end to the header going into A5. Grab a piece of solid core wire about 20 cm long, and solder one end in correspondence with the male header going into A5. Your EMI probe is ready.r going into A5. Your EMI probe is ready.)
  • Boîte à sac  + ( * Ajouter une calendrier pour dater l'ouverture du sac * Ajouter de la peinture à craie pour dater l'ouverture du sac * Ajouter des poignées pour faciliter le transport * Modification du pattern à la laser )
  • Showerloop - Guide 2: Filters  + (Laser cut or CNC the files in [http://googLaser cut or CNC the files in [http://google.com this pdf]. Since laser cutters handle cutting a bit differently there may be come problems with the file. Generally red / hairlines (0.001mm) is for cutting and black is for engraving.
    If you don’t have access to a laser cutter or CNC machine, a manual router can be used to cut out the groove in the filter and the whole shape if need be. To cut a perfect circle with a router a special tool may need to be made (look for circle jig on youtube).
    The lids and mounting plates can also be a single piece if you are using thick material. Four 10cm diameter x 50cm filters are required to have an appropriate flow rate of 10l/min. With 6.6l/min two filters are sufficient and 1 filter for 3.3l/min. The surface area is more important than the length of the filter because that determines the flow rate through the filter and thus reaction times. I use 10mm thick acrylic sheets for the lid and compression disks but I have used 4-5mm acrylic sheets in previous prototypes and glued them together with decent results.
    d 4-5mm acrylic sheets in previous prototypes and glued them together with decent results.)
  • Showerloop - Guide 2: Filters  + (There are 2 lids per filter, the top lid aThere are 2 lids per filter, the top lid and bottom lid - duh. A hex nut is used to fasten the hose nipple (facing away from the filter) to the filter lid. The dimensions of hex nuts and/or hose nipples may vary regionally so it's best to get them first,check the measurements and modify the file if needed. In the picture of the lid only a circle was etched/milled into the acrylic lid to fit the hex nut but the design was later revised to have the shape of the hex nut itself, thereby fastening it to the lid so that it could no longer rotate (and prevent fastening) when adding the hose nipple on the outer side of the lid. hose nipple on the outer side of the lid.)
  • Dafara sa panneau solaire  + (La batterie sert à accumuler  l'énergie prLa batterie sert à accumuler  l'énergie produite pendant la journée par les panneaux  et alimente la station météo . Montage : * Connecter la borne (+) de la batterie à la borne 1 du régulateur de tension, * Relier la borne (+) du 1er condensateur la relier à l’entrée 1 du régulateur. * Connecter la borne (-) du condensateur à la borne (-) de la batterie et, relier leur point commun à la borne 3 du régulateur. * Relier la borne (+) du 2ème condensateur à la borne 2 du régulateur et connecter le (-) de ce condensateur à la borne 3 du régulateur.e condensateur à la borne 3 du régulateur.)
  • Arrosage automatique de plantes vertes  + (Les pièces ont été collées avec de la colle à bois.)
  • Simple Steps of How to Combine Videos on Mac  + (Make sure that you have install the latestMake sure that you have install the latest version of [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] for Mac on your computer. Next, open it and simply drag videos to be combined to its mian interface. Alternatively, click the "Open File" button located in the lower left corner to add video files. the lower left corner to add video files.)
  • How to draw a cat  + (Make sure your circle is a little bit to the left of the middle of your paper. This will become the middle part of the body of the cat, so please make sure to leave enough space on the top and the bottom of your paper.)
  • Communication Dish  + (Measure and sketch the correct measurements required to make the dish on the plywood.(The measurement should be precisely done as this affects how the dish will turn out))
  • Thinger io - IoT Platform Series - 9  + (Modern methods of developing, got easier wModern methods of developing, got easier with software services. For hardware services, we have limited options. Hence [http://www.pcbway.com/?from=akshayansinha PCBWay] gives the opportunity to get custom PCB manufactured for hobby projects as well as sample pieces, in very less delivery time Get discount on the first order of 10 PCB Boards. Now, [http://www.pcbway.com/?from=akshayansinha PCBWay] also offers end-to-end options for our products including hardware enclosures. So, if you design PCBs, get it printed in a few steps!esign PCBs, get it printed in a few steps!)
  • Crypto Mining with ESP32  + (Money is one of the most important inventiMoney is one of the most important inventions in human history. It is a medium of exchange, a store of value, and a unit of account. Money enables trade, commerce, and economic growth. However, money also has its limitations and challenges. For example, money can be counterfeited, stolen, or inflated. To overcome these problems, some people have invented a new form of money: cryptocurrency. Cryptocurrency is a type of digital currency that uses cryptography to secure and verify transactions. Cryptocurrency is decentralized, meaning that it is not controlled by any central authority or government. Cryptocurrency transactions are recorded on a distributed ledger called a blockchain, which ensures transparency and immutability. Some examples of cryptocurrencies are: * '''Bitcoin''': The first and most popular cryptocurrency, created in 2009 by an anonymous person or group using the pseudonym Satoshi Nakamoto. Bitcoin has a limited supply of 21 million coins and uses a proof-of-work algorithm to validate transactions and create new blocks. * '''Ethereum''': A platform that allows developers to create decentralized applications (dApps) and smart contracts using its native cryptocurrency, ether. Ethereum uses a proof-of-stake algorithm to secure its network and enable faster transactions. Cryptocurrencies have many advantages over traditional money. They are: * '''Secure''': Cryptocurrencies use cryptography to protect transactions from fraud and hacking. Cryptocurrencies also have no single point of failure, as they are distributed across many nodes on the network. * '''Transparent''': Cryptocurrencies allow anyone to view the history and details of every transaction on the blockchain. Cryptocurrencies also have no hidden fees or charges, as they are based on peer-to-peer transactions. * '''Inclusive''': Cryptocurrencies enable anyone with an internet connection and a digital wallet to access the global financial system. Cryptocurrencies also have no barriers to entry or discrimination, as they are open to anyone regardless of their identity or location. * '''Innovative''': Cryptocurrencies foster innovation and creativity, as they allow developers to create new applications and services using blockchain technology. Cryptocurrencies also have the potential to disrupt various industries and sectors, such as banking, e-commerce, healthcare, education, and more. Cryptocurrencies are not without challenges and risks, however. They are: * '''Volatile''': Cryptocurrencies are subject to high price fluctuations due to supply and demand dynamics, market sentiment, regulatory uncertainty, and technical issues. Cryptocurrencies can also be affected by external factors, such as geopolitical events, cyberattacks, media coverage, and public opinion. * '''Complex''': Cryptocurrencies require a steep learning curve for users to understand how they work and how to use them safely and effectively. Cryptocurrencies also involve technical jargon and concepts that may be confusing or intimidating for beginners. * '''Unregulated''': Cryptocurrencies operate in a legal gray area, as they are not recognized or regulated by most governments and authorities. Cryptocurrencies may face legal restrictions or bans in some areas, which may limit their adoption and usage. Cryptocurrencies may also pose ethical and social issues, such as tax evasion, money laundering, terrorism financing, and environmental impact. Cryptocurrency is a new era of money that offers many opportunities and challenges for the future. Cryptocurrency is not just a technology or a currency; it is a social phenomenon that reflects the values and aspirations of its users. Cryptocurrency is not perfect or flawless; it is an experiment that evolves and improves over time. Cryptocurrency is not for everyone or everything; it is a choice that depends on one’s preferences and needs.at depends on one’s preferences and needs.)
  • How to Use Tidal Sleep Timer to Have a Good Sleep  + (On your iOS mobile device, you can set a sOn your iOS mobile device, you can set a sleep timer for Tidal by simply using the '''Clock''' app. '''1#''' On your iPhone, open the '''Clock''' app and tap '''Timer''' at the bottom. '''2#''' Here you can create a sleep timer for Tidal music as you want. '''3#''' Tap '''When Timer Ends''' and scroll down to the bottom to select '''Stop Playing'''. '''4#''' Tap '''Set''' to apply and adjust the time period as preferred. '''5#''' Once done, tap the '''Start''' button to start tracking the time. It will stop the Tidal from playing music automatically when the time ends.ng music automatically when the time ends.)