Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
Fruit piano + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
Fruit piano + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
E-waste lights + (The Android app is linked to the smart bin … The Android app is linked to the smart bin using WIFI or Bluetooth. It collects waste data, contains fun facts to educate people about recycling and waste sorting. To motivate people to keep on sorting their waste, the app also shows you how much money you have accumulated.s you how much money you have accumulated.)
Escooterfix - Relace mainboard any Xiaomi Mi electric scooter +
Buzzing Bee Circuit + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
created file to the printer. PRINT! )
DFRobot Beetle ESP32 C3 with Home Assistance + (The Beetle ESP32-C3 is based on the ESP32- … The Beetle ESP32-C3 is based on the ESP32-C3, a RISC-V 32-bit single-core processor. Despite its tiny size (only 25×20.5 mm), it packs a punch with up to 13 IO ports broken out, making it ideal for various projects without worrying about running out of IO options. worrying about running out of IO options.)
EMI probe 12+ activities + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
How to Convert Amazon Music to MP3 + (In the first place, you should download an … In the first place, you should download and install the right version of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Music Converter] on computer. Once launched, AudFree will present you with the Amazon Music web player, and what you need to do next is using the "Sign In" option to log into your Amazon account.n" option to log into your Amazon account.)
DIY Makey Makey with Arduino Leonardo + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
Arduino to ThingSpeak via SIM800 No Wi-Fi + (The legacy project documents that were ori … The legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
Salt Spray Chamber + (The material or product is placed inside the chamber, where it is exposed to a fine mist of saline solution (typically sodium chloride) at a specific concentration.)
Vogue and Amazon Fashion Unite + (The partnership between ''Vogue'' and Amaz … The partnership between ''Vogue'' and Amazon Fashion goes beyond just a shopping experience—it's a lifeline for many independent designers who face uncertain futures. With the challenges brought by economic fluctuations, particularly in the retail sector, small fashion brands are often the most affected. Traditional retail has suffered, and many boutique brands have struggled to maintain visibility and customer engagement. This collaboration brings their collections to Amazon’s extensive customer base, enabling them to reach millions more than they would through other channels. ''Vogue'' has long been a pillar of the fashion world, known for spotlighting groundbreaking designers and trends. By collaborating with Amazon, the magazine not only lends credibility but also helps expand the reach of American designers at a time when they need it most. The ease of Amazon’s digital shopping experience—fast delivery, reliable returns, and user-friendly features—means that customers can now support emerging designers with just a few clicks.emerging designers with just a few clicks.)
Marble Machine No 1 Motor Assembly Instructions + (The parts can be glued together in one go … The parts can be glued together in one go and the parts held in place with rubber bands The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
PiKon telescope + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing + (The [https://www.seeedstudio.com/60GHz-mmW … The [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
How to Play Spotify on Yoto Player + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
Node-Red Telegram Bot with Temperature Logger Part-1 + (In this article, I will show you how to us … In this article, I will show you how to use Node-RED and Telegram bot to send temperature data from a DHT11 sensor connected to a Raspberry Pi. You will be able to ask your Telegram bot for the current temperature and receive a reply with the sensor reading. You will also be able to set up a notification system that will alert you when the temperature exceeds a certain threshold. To follow this tutorial, you will need the following components: * A Raspberry Pi with Node-RED installed (you can follow [https://nodered.org/docs/getting-started/raspberrypi this guide] to install Node-RED on your Raspberry Pi) * A DHT11 temperature and humidity sensor * A Telegram account and a Telegram bot token (you can follow [https://core.telegram.org/bots this guide] to create a Telegram bot and get its token)o create a Telegram bot and get its token))
Blindspot Alert + (In this First Step, we discussed different approaches to building a blind spot alert that works perfectly in situations where people cab get hit by a car and where accidents occur.)
Wio WM1110: Quick Start Guide for Seamless Integration + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
Node Red with MQTT on Raspberry Pi + (This project works without much additional hardware. The one and only requirement is you just need a Raspberry Pi.)
E-Textile Monster + (This is where you need to decide what shap … This is where you need to decide what shape you want your monster to be and what components it will include. You need to make sure there is room for each of your components and the battery pack as well as decide where you want to squeeze the monster for the components to turn on. TIP: do not make your monster too big making your circuit components too spread out! Otherwise you will spend a long time sewing to connect the components together sewing to connect the components together)
Get Ready for Amazon Fashion's Big Style Sale - Don't Miss Out on These Amazing Deals! + (This year, Amazon has truly stepped up wit … This year, Amazon has truly stepped up with its first-ever Big Style Sale dedicated entirely to fashion. Unlike their general sales, this event is focused exclusively on clothing, shoes, and accessories from over 100 brands. You’ll find well-known names alongside smaller, up-and-coming designers, making it a fantastic opportunity to explore fresh styles and try out brands you may not have discovered otherwise.nds you may not have discovered otherwise.)
Glowing LED Butterfly + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
Escooterfix - Replace front LED lamp Xiaomi Mi electric scooter + (Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty.)
Replace dashboard and bluetooth card Xiaomi electric scooter + (Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty.)
ESP32 with WebSerial: A Comprehensive Guide + (WebSerial is a web standard that allows we … WebSerial is a web standard that allows websites to communicate with serial devices. It bridges the web and the physical world, enabling web applications to interact with hardware devices. This opens up a world of possibilities for IoT projects, allowing real-time interaction between web applications and physical devices.een web applications and physical devices.)
NEXT ENGINE 3D SCANNER :How to use it + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' … * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA''' 5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
Implementing Web Server on ESP32 + (=== What is a Web Server? === A web server … === What is a Web Server? === A web server is a software application that serves web pages to users. When a user requests a web page, the web server processes the request and sends the requested page back to the user’s browser. This forms the backbone of data communication on the World Wide Web. === What is ESP32? === The ESP32 is a series of low-cost, low-power systems on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor and includes built-in antenna switches, an RF balun, a power amplifier, a low-noise receiver amplifier, filters, and power management modules. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming.e demanding tasks such as music streaming.)
VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
Getting Started with 3.5 Inch PC State Display + (If you are a PC enthusiast, you might want … If you are a PC enthusiast, you might want to monitor the performance and status of your PC components, such as CPU, GPU, RAM, SSD, HDD, temperature, fan speed, etc. However, opening the task manager or third-party software every time you want to check this information can be inconvenient and distracting. Moreover, you might not be able to see this information when you are gaming or doing other full-screen activities. That’s why a 3.5-inch PC state display can be a great addition to your PC setup. A 3.5-inch PC state display is a small screen that can be mounted on your PC case and display various information about your PC state. It can show you the CPU model, usage, frequency, temperature, fan speed, GPU model, usage, frequency, temperature, fan speed, RAM usage, SSD/HDD usage, network speed, IP address, weather forecast, and custom information. You can also choose from different themes and orientations to suit your preferences. A 3.5-inch PC state display can help you monitor your PC state at a glance, without interrupting your workflow or gaming experience. It can also enhance the aesthetics and functionality of your PC case, making it more personalized and attractive. Whether you are a gamer, a streamer, a content creator, or a professional, a 3.5-inch PC state display can be a useful and fun tool for your PC. In this article, I will show you how to get started with a 3.5-inch PC state display, how to install it, how to customize it, and how to use it. Let’s begin!tomize it, and how to use it. Let’s begin!)
Cardboard Cable Car Model With Recycled Materials, Working Model 250rpm Electric Motor and Basic Slide Switch ON-OFF-ON (School Science Project) + (You can check all steps on video briefly or follow below steps. • Mount plastic pulley wheel onto DC motor shaft and glue on it.)
Energy module for People Pedal Power + (You can chose between different buffering … You can chose between different buffering systems, an battery, a supercapacitor or a flywheel. We chose a supercapacitor. A supercapacitor is an electronic component able to hold a charge. It can be used in the same function as batteries with the following differences : + a capacitor is easier to recycle than most batteries (references will follow). + a capacitor can provide and absorb a higher peak power. – the voltage varies with the charging state of the capacitor (it needs an additional converter to provide the voltage of the system) – the energy by weight capacity is less interesting than with batteries. – the cost by energy is higher. – the lifetime is quasi infinite (1M cycles). The energy storage of a supercapacitor : energy = 1/2 * C * voltage difference^2 http://www.engineeringtoolbox.com/capacitors-energy-power-d_1389.html ex = 1/2 * 500F * (16-12)^2 = 4000J = 1.11Wh = 1 cyclist for 1min20sec http://www.maxwell.com/products/ultracapacitors/16v-large-modules/documentsltracapacitors/16v-large-modules/documents)
SunZilla - Guide 5: Assembling solar panels frames + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
Line Follower Robot - King of Maze + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Testing NB-IoT connectivity in India with NRF9160 and Airtel + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
Node-Red Telegram Bot with Temperature Logger Part-2 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
M5Stick C Captive Portal + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Ethernet-Enhanced LoRa Gateway Minimizing Delay + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
Water Quality Monitoring System Based on IOT + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Temperature Control Neo Pixels with Arduino Nano + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here]. Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
Getting Started with TivaWare Launchpad - Basics + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Neo Pixels Ring with Arduino Nano + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here. U]sing this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
OpenKnit: digital fabrication tool to create your own clothes + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
How to Use Tidal Sleep Timer to Have a Good Sleep + (On your iOS mobile device, you can set a s … On your iOS mobile device, you can set a sleep timer for Tidal by simply using the '''Clock''' app. '''1#''' On your iPhone, open the '''Clock''' app and tap '''Timer''' at the bottom. '''2#''' Here you can create a sleep timer for Tidal music as you want. '''3#''' Tap '''When Timer Ends''' and scroll down to the bottom to select '''Stop Playing'''. '''4#''' Tap '''Set''' to apply and adjust the time period as preferred. '''5#''' Once done, tap the '''Start''' button to start tracking the time. It will stop the Tidal from playing music automatically when the time ends.ng music automatically when the time ends.)

Escooterfix - Relace mainboard any Xiaomi Mi electric scooter + (The battery connects to the ESC via a '''yellow XT30 plug''', carefully pull this out)

Mobile renewable energy platform on a cargo bike + ('''''charging''''' - input : DC power for … '''''charging''''' - input : DC power for 5 generation bikes power 5*100W - peak 5*200 voltage 48V current 30A '''''conversion and output''''' - output AC : power for an open-air cinéma, projector and active speakers - output DC : power for a 3D printer power 700W voltage 220AC current 1A '''''battery''''' - buffer : DC supercapacitor power 1000W voltage 48V current 30A - peak 40A1000W voltage 48V current 30A - peak 40A)
Can I Ace CCIE Exam by Self-study + (If you want to ask which certificate has t … If you want to ask which certificate has the best gold content, it is of course the CCIE certification or JNCIE certification from Cisco or Juniper. If you think that there are too many CCIEs nowadays, if you want to be useful, then go take a JNCIP or JNCIE. After all, we need knowledge. The result of learning these certificates is to make you useful, not just this certificate. it works. Some people ask whether the current certificates are still useful? I actually answered this question just now. Certification is useful, but only if you really understand it, not just buying a certificate. This certificate is not the same as a university diploma. It requires you to be able to work. The current situation in the industry is difficult because there are too many people looking for a job with a certificate. They actually don’t understand anything, and they are also very good at companies. No value, of course they don't want you. As for the concept of understanding, you can probably say that as long as you give you the equipment, you can adjust it, and you can solve the problem if it fails. This is called understanding, and it depends on your hands-on practice. You should set aside a few months to prepare for the exam, and work steadily to learn, which will help your future. Learning is lifelong. You have to distinguish clearly between the training based on textual research and the training based on learning technology. It's like taking a four-level certificate and learning spoken English, each taking what you need is very different. You need to carefully compare the learning syllabus, field visits, and understanding in many aspects, and you will know that the real professional knowledge is not everywhere. Network professional technical training services are provided. [https://cciedump.spoto.net/ccie-enterprise-Infrastructure-en-training/ CCIE training courses] include: multi-layer switching structure, large-scale deployment of routing protocols., Internet architecture composition, IP service quality and traffic management, cross-domain multicast services, IPv6, MPLS architecture and applications, etc. Ordinary learning institutions do not have the real strength to train and operate the core backbone network. They have very different levels of understanding of the same technology. High-pressure operations under the production network involve the required professional qualities, and the mentality of learning is simple. What you can’t understand by learning is that you need to go through a lot of actual combat and accumulation, and ITAA is to accelerate your process, so that you can reach the height that can only be achieved by accumulation of several 10 years, and lay a solid foundation in half a year to a year. 2 -3 years to establish a solid knowledge structure. The definition of zero-based learning of network technology means that you have not studied or operated network equipment before. A general university’s study can complete the four-level IPA course content and implement the corresponding 2000-hour study plan to achieve a systematic Master the knowledge of network architecture. If you use your spare time to study during college, you can finish it in about 2-3 years. If you are dedicated to studying, you can finish it in 6-8 months if you work hard enough to lay a solid foundation. After that, you can gradually strengthen all aspects of technology according to the needs of the work. In general, the learning and upgrading of technology has never stopped for the senior engineering who has been in the industry for decades, but one is enough to support your entry into the industry. Or a solid foundation to start is indispensable. Founded in 2003, [https://cciedump.spoto.net/ SPOTO] is an outstanding leader in IT certification training for 18 years, focusing on various certification exam answers and questions to help all candidates obtain certificates in their first attempt.to help all candidates obtain certificates in their first attempt.)
Exploring the World of Electric Scooter Manufacturers: Leading Innovation for a Sustainable Future + (In recent years, electric scooters have su … In recent years, electric scooters have surged in popularity due to their convenience, eco-friendly appeal, and cost-effective transportation solutions. At the heart of this growing industry are electric scooter manufacturers, the companies behind designing, engineering, and bringing these scooters to the market. This article delves into the world of electric scooter manufacturing, highlighting what makes these companies stand out, the key players, and what to consider when choosing an electric scooter manufacturer. The Rise of Electric Scooters: A Brief Overview Electric scooters have redefined urban commuting, providing a versatile alternative for short-distance travel. With cities worldwide implementing green transportation solutions, electric scooters have become symbols of sustainable urban mobility. Manufacturers play a pivotal role in this shift, continuously innovating to improve the safety, durability, and performance of electric scooters. What Sets Top Electric Scooter Manufacturers Apart? Innovation in Design and Technology Leading manufacturers are constantly pushing the boundaries of design and technology. From advanced battery technology for longer range to intuitive app integrations, top manufacturers incorporate the latest advancements. The focus is on developing lightweight, foldable, and durable scooters with enhanced safety features like anti-lock braking systems (ABS), LED headlights, and enhanced stability mechanisms. Focus on Sustainability Environmentally conscious manufacturers emphasize using recyclable materials and renewable energy in production. Many manufacturers implement eco-friendly practices across the supply chain, from raw material sourcing to energy-efficient manufacturing processes. Quality Control and Certification Standards Reputable manufacturers follow strict quality control protocols, ensuring each scooter meets industry standards and certifications. Common certifications include CE, RoHS, and UL, which guarantee compliance with safety, environmental, and durability regulations. Customer-Centric Customization Options Manufacturers increasingly offer customization to cater to a broader range of customers. Options may include different motor power configurations, battery sizes, and even color and branding customization for fleet orders. Customization is especially relevant for businesses, as it enables brand identity integration. Global After-Sales Support and Service A robust after-sales support system is critical for maintaining customer satisfaction. Top manufacturers ensure global support networks for spare parts, maintenance, and repairs, enhancing the scooter's longevity and usability. Leading Electric Scooter Manufacturers 1. Segway-Ninebot Known for its high-quality electric scooters, Segway-Ninebot is a global leader in personal mobility solutions. It combines innovative features like self-balancing technology and an extensive product line suitable for urban commuters and businesses. 2. OKAI OKAI is a leading brand known for its focus on design, performance, and affordability. With a commitment to sustainability, OKAI offers a range of electric scooters catering to diverse needs, from personal commuting to fleet services. 3. Xiaomi Xiaomi is another powerhouse in the electric scooter industry, recognized for producing high-quality yet affordable electric scooters. Their M365 model set the standard for lightweight, foldable scooters, and Xiaomi continues to innovate with improved battery life and added smart features. 4. GOTRAX Based in the United States, GOTRAX specializes in budget-friendly, durable electric scooters. Their scooters are especially popular among urban commuters looking for practical solutions that offer reliability and comfort. 5. Inokim Inokim is an Israeli manufacturer celebrated for its durable and premium electric scooters. Known for robust design and high-performance capabilities, Inokim scooters often feature powerful motors and advanced suspension systems, making them suitable for more rugged terrain. Key Considerations When Choosing an Electric Scooter Manufacturer Product Range and Specifications Assess whether the manufacturer offers a range that suits your needs. For example, lightweight models are ideal for city commutes, while off-road-capable scooters are better suited for more challenging terrains. Battery and Motor Specifications Battery capacity and motor power determine the scooter’s range and speed. Manufacturers with advanced battery technology offer longer-lasting and faster-charging batteries, a critical factor for frequent riders or fleet operators. Safety Features Look for manufacturers who prioritize safety with features like anti-lock braking systems (ABS), LED lighting, dual brakes, and enhanced traction tires. These features enhance rider safety, especially in urban environments with varying terrain. Warranty and After-Sales Support A good warranty and accessible after-sales support are indicators of a reliable manufacturer. Check the availability of service centers and spare parts in your area to ensure maintenance ease. Environmental Responsibility Some manufacturers are leaders in eco-friendly practices, using recyclable materials and minimizing emissions during production. Supporting such brands promotes a sustainable ecosystem in the e-mobility industry. Check more at this blog:

https://b2b.okai.co/blogs/how-fast-do-e-bikes-go
Conclusion: The Future of Electric Scooter Manufacturers As electric scooters continue to evolve, manufacturers play a crucial role in setting industry standards, making urban mobility more accessible, efficient, and sustainable. By prioritizing innovation, quality, and customer satisfaction, these manufacturers are at the forefront of a transportation revolution. Whether for personal use or fleet services, choosing the right [https://b2b.okai.co/ electric scooter manufacturer] ensures you’re investing in quality, performance, and a more eco-friendly future.ures you’re investing in quality, performance, and a more eco-friendly future.)
How to make party poppers + (Party poppers are a delightful way to add … Party poppers are a delightful way to add an extra burst of fun to any occasion. Whether it's a birthday, wedding, or New Year's Eve celebration, these colorful and confetti-filled surprises can make your event even more memorable. Making your own party poppers is not only easy but also allows you to customize them to fit the theme of your celebration. In this guide, we'll walk you through the supplies needed, the step-by-step process, and some creative ideas on how to use them. == Supplies Needed for DIY Party Poppers == Before you begin crafting your party poppers, gather the following supplies: * '''1 empty paper towel tube or tissue paper roll:''' This will serve as the main body of the popper. * '''Glitter, confetti, and small party favors:''' Fill your poppers with glitter, fortunes, horoscopes, confetti, mints, funny notes, chocolate coins, or small party favors. * '''12-by-12-inch piece of wrapping or tissue paper:''' Choose a paper that matches your event's theme or color scheme. * '''Scissors:''' To cut the cardboard tube and wrapping paper. * '''Glue gun or tape:''' Secure the wrapping paper around the tubes. * '''Ribbon:''' Add a decorative touch and help secure the ends of the popper. == Step-by-Step Directions for Making Party Poppers == === 1. Prepare the Cardboard Tubes === Begin by cutting the cardboard tube in half. Next, cut one of the halves in half again, leaving you with three smaller tubes of different sizes. These will form the body of your party poppers. === 2. Fill the Tubes === Now that you have your tubes ready, it's time to fill them. Add glitter, confetti, and any small party favors you’ve selected. The contents will create the "pop" when the popper is used, so be sure to pack them well but not too tightly. === 3. Wrap the Tubes === Lay your 12-by-12-inch piece of wrapping paper face down on a flat surface. Arrange the three filled tubes in an even row at the edge of the paper, leaving about a 1/2-inch space between each tube. Carefully glue or tape the edge of the wrapping paper along the length of the tubes to secure them in place. Roll the paper over the tubes until they are fully wrapped, then trim any excess paper, including from the ends of the tubes. === 4. Add Finishing Touches === Gently twist the wrapping paper at the spaces between the tubes to create the classic party popper shape. Secure each twisted section with a piece of ribbon for a festive look. The ribbon not only adds flair but also helps hold the popper together. === 5. Display and Use Your Party Poppers === Your party poppers are now ready! You can add them to your table settings, place a bunch in a large glass bowl as a centerpiece, or hand them out to guests right before the big moment. == Tips and Variations for Creative Party Poppers == * '''Easy Breakage:''' Before giving the poppers to your guests, use a pin to poke holes around the edges of the tube. This will make it easier for the popper to break open when pulled. * '''Size Variations:''' For smaller poppers, use cardboard tubes from wrapping paper rolls instead of paper towel tubes. * '''Personalization:''' Create a personalized look by wrapping the tubes with color copies of family photos or images that match the theme of your event. == Where and How to Use Party Poppers == Party poppers are versatile and can be used in various types of celebrations. Here are some ideas for where and how to use them: === 1. '''Birthday Parties''' === Party poppers can be used when the birthday person makes a wish and blows out the candles. Alternatively, they can be given out as party favors to guests as a fun takeaway. === 2. '''Weddings''' === Instead of the traditional rice or confetti, guests can pop party poppers during the newlyweds’ send-off, creating a spectacular photo opportunity. === 3. '''New Year's Eve''' === Distribute party poppers to guests before midnight. When the clock strikes twelve, everyone can pop them to celebrate the arrival of the new year. === 4. '''Gender Reveal Parties''' === Fill the poppers with pink or blue confetti for a fun and interactive way to reveal the baby's gender to family and friends. === 5. '''Graduation Parties''' === Celebrate the graduate's achievement by popping the poppers during the ceremony or at the party. It’s a great way to mark the big moment with a burst of excitement. === 6. '''Holiday Gatherings''' === Whether it’s Christmas, Halloween, or the Fourth of July, you can customize the poppers with thematic colors and confetti to add a festive touch to your holiday celebrations. === 7. '''Engagement Parties or Proposals''' === Celebrate love with a unique twist by filling the poppers with rose petals or themed confetti. It’s a memorable way to enhance the moment. === 8. '''Retirement Celebrations''' === Mark the transition from work to retirement with the joyous noise and visual delight of party poppers. === 9. '''Anniversary Parties''' === Party poppers are perfect for any anniversary celebration, adding a joyful burst of color and fun to the occasion. === 10. '''Welcome Home Parties''' === Celebrate a loved one’s return with the cheerful explosion of party poppers, making their homecoming even more special. == Conclusion == Making your own party poppers is a fun, easy, and creative way to add an extra layer of excitement to any event. Whether you’re celebrating a birthday, wedding, or holiday, these DIY poppers can be customized to fit any theme and are sure to be a hit with your guests. So gather your supplies, follow the steps, and get ready to pop your way to a fantastic celebration! [https://www.designsforcricut.com/product/Elegant-Cricut-Catio-Designs-Custom-Monogram-for-Cat-Lovers Cricut catio designs] , [https://www.designsforcricut.com/category/monograms/3dfont Cricut 3d fonts for logos]onograms/3dfont Cricut 3d fonts for logos])
Escooterfix - Remove the bottom plate, battery protection Xiaomi electric scooter + (The battery cover is secured with '''twent … The battery cover is secured with '''twenty-one torx 10''' bolts. Removing them by hand can take a while but with a quality driver bit you can use a low-torque electric screwdriver to help. The bolts on the leading edge of the deck may be burred up depending how aggressively the scooter has been ridden over kerbs or rocks.ooter has been ridden over kerbs or rocks.)
Temperature display on LCD and Android device + (Unplug the bluetooth module before you upl … Unplug the bluetooth module before you upload the sketch to your Arduino board, then plug it back in right after, or you might experience communication problems between your computer and the Arduino To get the temperature on your android device, install Bluetooth Terminal App ( from Qwerty as i recall). Once you're connected, sending the A letter enables you to get the temperature back. Pieces of code were harvested form the web . [http://monespabidou.fr/2016/08/affichage-de-la-temperature-sur-un-afficheur-lcd-et-sur-un-appareil-android/ Click here to get the code.]reil-android/ Click here to get the code.])
Interfacing a Servo Motor with Arduino Nano + ( * '''Arduino Nano''' (official or compatible board) * '''Servo Motor''' (e.g., SG90 micro servo) * '''Jumper wires''' * '''USB cable (Mini-B)''' for programming )
Real Time System Telemetry Dashboard with FireBeetle ESP32P4 + ( * '''DFRobot FireBeetle ESP32‑P4''' board … * '''DFRobot FireBeetle ESP32‑P4''' board (or compatible ESP32‑P4 board * USB cable (for power, programming, and serial data) * Optional: small breadboard / jumper wires if you want to wire external LED or buttons (onboard LED uses pin 3) '''Display / UI''' * No OLED required for the web UI version — everything is in the browser. '''Software on PC''' * '''Python 3.8+''' * Python packages: '''pyserial''', '''psutil''' (install with pip install pyserial psutil) '''Arduino IDE''' * Latest Arduino IDE or VS Code with PlatformIO * ESP32 board support installed (Espressif package) * Libraries: '''Arduino_JSON''' (install via Library Manager) '''Network''' * Local Wi‑Fi network credentials (SSID and password) for the ESP32 to host the webserver (SSID and password) for the ESP32 to host the webserver )

Battery + (=Einführung= Die Energiewende im privaten … =Einführung= Die Energiewende im privaten Bereich schreitet schnell voran. Immer mehr Hausbesitzer setzen auf Photovoltaikanlagen, um ihren eigenen Strom zu erzeugen. Doch um diesen Strom optimal zu nutzen, ist ein '''Speichersystem''' notwendig. Besonders beliebt sind sogenannte '''All-in-One Speicherlösungen''' – Systeme, bei denen alle notwendigen Komponenten in einem kompakten Gerät vereint sind. Diese Komplettlösungen sind ideal für alle, die eine einfache, platzsparende und effiziente Lösung für die Eigenstromnutzung suchen. In diesem Artikel erfahren Sie alles Wissenswerte über All-in-One Speicher, ihre Vorteile, Einsatzbereiche und führende Hersteller. ---- ==Was ist ein All-in-One Speicher?== Ein [https://www.u-energie.de/product/re-ha1-all-in-one-residential-energy-storage all in one batteriespeicher] ist ein Komplettsystem, das mehrere zentrale Komponenten der Energieversorgung in einem Gerät kombiniert: *'''Batteriespeicher''' (Lithium-Ionen oder Lithium-Eisenphosphat) *'''Wechselrichter''' (zur Umwandlung von Gleich- in Wechselstrom) *'''Batteriemanagementsystem (BMS)''' *'''Lade-/Entladeregler''' *'''Energiemanagementsystem (EMS)''' mit Monitoring *'''Teilweise integrierter Stromzähler / Notstromoption''' Das Ziel: eine '''“Plug-and-Play”-Lösung''', die schnell installiert ist und ohne komplexe Verkabelung auskommt. ---- ==Vorteile eines All-in-One Speichers== ===✅ '''Kompakte Bauweise'''=== Alle wesentlichen Komponenten sind in einem Gehäuse untergebracht – ideal für Keller, Technikräume oder Garagen mit wenig Platz. ===✅ '''Einfache Installation'''=== Dank vorkonfigurierter Systeme ist die Montage schnell und unkompliziert – oft innerhalb eines Tages möglich. ===✅ '''Perfekt abgestimmte Komponenten'''=== Da alle Bauteile vom selben Hersteller kommen, sind sie optimal aufeinander abgestimmt – was Ausfälle reduziert und die Effizienz erhöht. ===✅ '''Geringer Wartungsaufwand'''=== Viele All-in-One Systeme verfügen über Fernüberwachung per App und benötigen kaum Wartung. ===✅ '''Modernes Design'''=== Die Geräte sind oft sehr ästhetisch und lassen sich gut in moderne Wohnräume integrieren. ===✅ '''Notstrom- & Backup-Funktion (optional)'''=== Einige Systeme bieten die Möglichkeit, bei Stromausfall kritische Verbraucher weiter zu versorgen. ---- ==Für wen eignet sich ein All-in-One Speicher?== Ein All-in-One Speicher ist besonders geeignet für: *Einfamilienhäuser mit oder ohne bestehende PV-Anlage *Neubauten mit integrierter Energieplanung *Sanierungen, bei denen wenig Platz für Technikräume vorhanden ist *Nutzer, die eine schlüsselfertige Lösung ohne viele Einzelkomponenten suchen *Menschen, die Wert auf Design, Benutzerfreundlichkeit und smarte Steuerung legen ---- ==Typische technische Merkmale==

Eigenschaft Typischer Wert
'''Speicherkapazität''' 5 – 15 kWh
'''Entladeleistung''' 3 – 10 kW
'''Batterietyp''' Lithium-Ionen oder LiFePO4
'''Wirkungsgrad''' 90 – 97 %
'''Erweiterbarkeit''' Teilweise modular
'''Kommunikation''' WLAN, LAN, RS485, CAN, App-Anbindung
'''Maße & Gewicht''' Kompakt, meist wandmontierbar
---- ==Beliebte Hersteller & Modelle== Hier einige der bekanntesten All-in-One Systeme auf dem Markt: ===🔹 '''SENEC.Home V3 Hybrid'''=== *Deutsche Marke, robust & zuverlässig *Integrierter Hybridwechselrichter *Notstromfunktion optional ===🔹 '''sonnenBatterie 10'''=== *Hochwertiges System mit Energiemanagement *Ideal für Smart-Home-Integration *Community-Strommodelle möglich ===🔹 '''E3/DC S10 E PRO'''=== *Premiumlösung mit hoher Backup-Leistung *Ideal für größere PV-Anlagen *3-phasige Versorgung möglich ===🔹 '''BYD HVS / HVM + Fronius GEN24'''=== *Zwar zweiteilig (Speicher + Wechselrichter), aber als Komplettpaket konzipiert *Sehr hohe Flexibilität und Erweiterbarkeit ===🔹 '''Alpha ESS Smile5'''=== *Modernes Design mit integrierter App-Steuerung *Kompakter Allrounder für kleine bis mittlere Haushalte ---- ==Wirtschaftlichkeit== Die Kosten für ein All-in-One Speichersystem hängen stark von Kapazität, Marke und Funktionen ab. Typischer Preisrahmen: *'''5 kWh System:''' ca. 6.000 – 8.000 € *'''10 kWh System:''' ca. 9.000 – 13.000 € *'''15 kWh System:''' ca. 12.000 – 17.000 € Hinzu kommt ggf. die Photovoltaikanlage. Förderungen (z. B. KfW) können die Investition deutlich erleichtern. ---- ==Installation & Inbetriebnahme== Die Installation erfolgt durch zertifizierte Fachbetriebe. Vorteile: *Kürzere Montagezeit (oft < 1 Tag) *Weniger Platzbedarf *Keine aufwendige Systemkonfiguration *Direkt einsatzbereit nach Anschluss ---- ==Fazit== Ein '''All-in-One Speicher''' ist die perfekte Lösung für alle, die eine kompakte, wartungsarme und leicht installierbare Möglichkeit suchen, um ihren Solarstrom effizient zu speichern und zu nutzen. Die Technik ist ausgereift, die Bedienung einfach – und die Energieunabhängigkeit ein gutes Stück näher. Besonders für Haushalte mit mittlerem bis hohem Stromverbrauch, wenig Platz und dem Wunsch nach smarter Energieversorgung ist ein All-in-One-System die richtige Wahl.sgereift, die Bedienung einfach – und die Energieunabhängigkeit ein gutes Stück näher. Besonders für Haushalte mit mittlerem bis hohem Stromverbrauch, wenig Platz und dem Wunsch nach smarter Energieversorgung ist ein All-in-One-System die richtige Wahl.)

Mtb-ebike + (== Why the Right E-MTB Matters == [https:/ … == Why the Right E-MTB Matters == [https://lacrosebike.com/products/thunder Mountain electric bicycles]—commonly called '''e-MTBs'''—are transforming how people ride off-road. By combining the thrill of traditional mountain biking with the convenience of electric assistance, these bikes allow riders to explore tougher trails, climb higher, and ride longer. But with so many models available, how do you choose the best mountain electric bicycle for your needs? Whether you're a beginner or upgrading your current setup, this guide breaks down the key factors to consider so you can buy with confidence and enjoy every ride. ---- == 1. '''Understand Your Riding Style and Goals''' == Before choosing a mountain e-bike, think about where and how you plan to ride: * '''Light trails and forest paths?''' Choose a lightweight hardtail e-MTB. * '''Mixed terrain with some technical sections?''' Go for a versatile trail e-MTB. * '''Steep climbs, rocky descents, or bike park use?''' Opt for a full-suspension enduro or all-mountain e-MTB. * '''Daily off-road commuting or multi-day rides?''' Look for a comfortable, long-range model with racks and lights. Your intended terrain will shape the frame, suspension, and battery range you need. ---- == 2. '''Choose the Right Suspension: Hardtail vs. Full Suspension''' == Suspension determines how your bike handles rough terrain and absorbs shocks. === ● '''Hardtail (Front Suspension Only)''' === * Lighter, easier to maintain, and often more affordable * Best for smoother trails, gravel roads, and fitness riding * Great for beginners or those on a budget === ● '''Full Suspension (Front and Rear Suspension)''' === * Offers better traction, control, and comfort * Ideal for rough terrain, technical trails, and downhill riding * Slightly heavier and more expensive, but worth it for aggressive trail riding If you plan to ride rocky or root-filled trails, '''full suspension is recommended'''. ---- == 3. '''Understand Motor Types and Power''' == The motor is what gives an e-bike its boost. Most mountain e-bikes use '''mid-drive motors''', positioned near the pedals. === ● '''Mid-Drive Motors''' (e.g. Bosch, Shimano, Brose) === * Better weight distribution * More efficient climbing performance * Smooth and natural power delivery * Best for mountain biking Avoid rear hub motors for serious off-road use—they’re better suited for city bikes or hybrids. '''Tip:''' Look for motors offering '''60–90 Nm of torque''' for strong climbing ability. ---- == 4. '''Battery Size and Range Matter''' == Battery capacity determines how far you can ride on a single charge. * Measured in '''watt-hours (Wh)'''—the higher the number, the longer the range * '''500–700Wh''' batteries are common in mid-to-high-end mountain e-bikes * Some bikes offer '''dual battery systems''' for extra-long adventures Your range depends on factors like terrain, assist level, rider weight, and wind. If you're planning long trail rides or hilly routes, '''go for the largest battery you can afford'''. ---- == 5. '''Frame Size and Fit Are Crucial''' == A properly fitting frame makes a huge difference in comfort, control, and performance. Most brands provide sizing charts based on rider height. Also look for features like: * '''Adjustable seatposts (dropper posts)''' for on-the-fly height changes * '''Slack head tube angles''' for stable downhill riding * '''Steep seat tube angles''' for better climbing efficiency Whenever possible, test ride or measure before buying to ensure the right fit. ---- == 6. '''Drivetrain and Braking System''' == Your drivetrain and brakes must withstand the power of electric assist and trail conditions. * '''1x drivetrain''' (single front chainring, wide-range cassette) is ideal—simple and reliable * '''Brands like Shimano Deore, SLX, or SRAM SX/GX''' are great for e-MTB use * '''Hydraulic disc brakes''' (with large rotors, 180mm or more) are essential for safe downhill stopping power Avoid mechanical brakes or low-end drivetrains—they won’t perform well under trail stress. ---- == 7. '''Tires and Wheels for Trail Grip''' == Tires affect traction, comfort, and control on various surfaces: * '''27.5” wheels''': More agile, great for tight turns and jumps * '''29” wheels''': Roll over obstacles easier and offer better stability on climbs * '''Tire width''': Look for '''2.4" to 2.8"''' wide tires for grip and comfort * '''Tubeless-ready''': Helps reduce flats and allows lower pressure for better traction Match your tire setup to your trail style—looser trails benefit from wider, grippier tires. ---- == 8. '''Look for Smart Features and Tech''' == Many modern mountain e-bikes offer '''smart displays''', apps, and customization features. Look for: * '''LCD or LED display''' showing speed, range, and assist level * '''Assist modes''' (Eco, Trail, Boost, etc.) to control power delivery * '''Walk-assist function''' for pushing uphill * '''Bluetooth or app integration''' for tracking rides and adjusting settings These features enhance your ride experience and allow better control over your battery use. ---- == 9. '''Set a Realistic Budget''' == Mountain electric bikes come in a wide price range depending on features and build quality: * '''Entry-level:''' $1,500–$2,500 (hardtail, smaller battery, basic components) * '''Mid-range:''' $2,500–$4,500 (mid-drive motor, good suspension, 500–700Wh battery) * '''High-end:''' $5,000+ (full suspension, advanced motor, top-tier components) '''Pro tip:''' Don’t just chase low prices. Focus on value, brand reliability, warranty, and post-sale support. ---- == 10. '''Choose a Trusted Brand or Seller''' == Buying from a reputable brand or retailer ensures you get: * '''Warranty protection''' * '''Reliable customer service''' * '''Access to spare parts and repairs''' * '''Peace of mind''' with tested products Some well-known e-MTB brands include '''Trek, Giant, Cube, Haibike, Orbea, Specialized, and Canyon'''. If buying online, check return policies and customer reviews. ---- == Final Thoughts: Buy Smart, Ride Confidently == Choosing a mountain electric bicycle is about matching your riding style with the right features—motor, suspension, battery, and frame fit. A well-chosen e-MTB not only transforms how you ride but also boosts your confidence and enjoyment on the trail.our confidence and enjoyment on the trail.)
Getting Started with DFRobot Rainbow Link + (=== 🔌 DFRobot RainbowLink (TEL0185) === * … === 🔌 DFRobot RainbowLink (TEL0185) === * Dual TTL UART channels (A & B) via lever terminals * Built-in power outputs: 3.3V, 5V, 12V (selectable via jumper) * Plug-and-play via USB-C — auto enumerates 4 COM ports * Ideal for ESP32, STM32, LoRa, and GPS modules === 📡 SeeedStudio Wio E5 (STM32WLE5JC) === * Compact Grove-compatible LoRa module * AT command interface over UART * Default baud rate: '''9600''' * Pins: VCC, TX, RX, GND (3.3V logic) * Designed for ultra-low-power IoT applications Designed for ultra-low-power IoT applications)
Robot nettoyeur de microbilles plastiques + (Découverte du sujet Cahiers des charges Planification du projet Réalisation du croquis Mis en commun des idées Choix des composants et matériaux)
Static IP Address on Xiao ESP32 S3 Sense + (An IP address is a unique identifier for a … An IP address is a unique identifier for a device on a network. It consists of four numbers separated by dots, such as 192.168.1.100. A static IP address is an IP address that does not change, unlike a dynamic IP address that is assigned by a router or a DHCP server. === Advantages === * Easier to remember and access. * More reliable and stable connection * Less prone to IP conflicts or errors === Disadvantages === * More difficult to configure and maintain. * Less flexible and scalable * More vulnerable to security risks Therefore, you should only use a static IP address if you have a specific need for it, and if you are aware of the potential drawbacks. you are aware of the potential drawbacks.)
Guide on how to Permanently Add Subtitles to MP4 + (After downloading and installing Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner], run it. Then you can add MP4 files to Joyoshare with 2 ways: Drag and drop MP4 video to the left screen; Select from the local folder.)
FLAC Joiner to Join FLAC Files in Original Quality + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
Play Tidal Songs on Roku TV + (After the download and installation of the … After the download and installation of the TuneCable program. Run it and choose a download mode from the main interface. The app mode needs the TIDAL app to run and can save up to Tidal Max (up to 24-bit/192kHz) music at 5x or 1x (for Mac) the speed, while the web player mode works via the built-in Tidal web player and can retain Tidal High (16-bit/44.1kHz) quality music at 10x fast speed. Pick the one you prefer, and sign in to your Tidal Free, HiFi, or HiFi Plus account.ur Tidal Free, HiFi, or HiFi Plus account.)
MUTED - boitier biodata vers module de synthétiseur analogique + (Attention, il faut d'abord être capable de … Attention, il faut d'abord être capable de brancher une plante sur une carte électronique pour capter et transformer de minuscules variations électriques. Ceci vous prendra entre deux heures et une demi-journée [http://wikifab.org/wiki/Capteur_BioData_pour_ESP32 en suivant le tuto de Stéphane Godin.]P32 en suivant le tuto de Stéphane Godin.])
Lossless FLAC Splitter to Split FLAC in Original Quality + (Based on your system, select the proper ve … Based on your system, select the proper version of Joyoshare [https://www.joyoshare.com/video-cutter-win/ audio splitter] to download and install. Then, open the program and go to "Open" to access your local folder and choose the FLAC file to it. Or, you can drag and drop the FLAC audio file to the specified position to start.o file to the specified position to start.)
Build a Longboard from Scratch in Your Own Home + (Before you start putting together your lon … Before you start putting together your longboard, you'll need to do some cutting and drilling. Begin by cutting your threaded rods into two pieces, each 8 inches long. Use a fret file to smooth out the rods, which are 5/16" x 12" inches in size. Next, apply grip tape to the board. Cut the grip tape to be about one centimeter wider than the board, then press it onto the board and trim off any excess. With your 6º wedge riser, mark where you'll drill to attach the INOX Allen bolts, which are 1/4" x 1.5" in size. Ensure the marks are centered on the ends of your board. Safety is crucial, so wear gloves and safety glasses during this process. Carefully drill four holes, making sure they are clean and precise. We used a 3D-printed part to help us drill the holes in the cap perfectly centered. If you'd like access to the design for this part, please let us know, and we'll share it with you. Finally, position the drill in the middle of your 1" cap and drill each hole carefully. The 1" cap should have a similar appearance to the one shown in the image. appearance to the one shown in the image.)
Replace brake handle Xiaomi Mi elesctric scooter + (Begin by releasing the brake cable from th … Begin by releasing the brake cable from the lever. Pull the red brake outer tube away from the lever to reveal the metal ferrule, then pull the cable away from the front of the scooter allowing it to pass through the channel in the front of the lever. Once free you can depress the lever to reveal the round metal head of the cable, lift it up to release it from the handle. lift it up to release it from the handle.)
Bucket stool made of wood and concrete + (Bend the sides of the bucket outwards a few times in each direction to loosen the concrete; then pull the stool out by the legs.)
Bucket stool made of wood and concrete + (Bend the sides of the bucket outwards a few times in each direction to loosen the concrete; then pull the stool out by the legs.)
Conductive paint + Makey Makey + (To check whether your conductive paint is … To check whether your conductive paint is indeed conductive, we can run a test with the aid of a voltmeter. Paint a straight line on a sheet of paper. Then place the two ends of the voltmeter (the red one and the black one) each at one end of the line. Place the cursor of the voltmeter in a position to read the value of resistance and a number should display on your voltmeter.a number should display on your voltmeter.)
Atelier pour Arrosage automatique et autonome + (Choix notés ce soir: * quel type de pompe … Choix notés ce soir: * quel type de pompe ? (s'assurer qu'elle peut aller jusqu'au bout du mur) * batterie rechargeables ou pas ? * arrosage sur ou sous terre * circuit électronique simple, ou nano, ou nodemcu (rester dans du "standard") * quel panneau solaire? Doit-il pouvoir alimenter le moteur directement, ou faut il passer par des batteries pour avoir assez de puissance? Il y a même des tutos sur des [https://www.electronicshub.org/solar-battery-charger-for-18650/ circuits de recharge utilisant un simple TP4056] connecté au panneau et à la batterie! Est-ce sérieux? (Autre composant apprécié : J5019) Ci-joint un panneau que j'ai, de 12V , 3,5W, 290mA.un panneau que j'ai, de 12V , 3,5W, 290mA.)
Drone aile volante + ( *Commencez par couper les marges avec une … *Commencez par couper les marges avec une règle et un cutter, prenez garde à suivre correctement le tracé en pointillé. *Se munir du tube de colle, puis encollez la feuille du coin en haut à gauche (Répartissez de la colle sur toute la surface du verso ) , là positionner sur un carton plein d'au moins 76cm*50.6cm et de 3mm d'épaisseur. Les deux bords en traits pleins doivent être superposés aux bords du carton. *Encoller la seconde section, là positionner à côté de la première en veillant à ce que les repères coïncident. *Poursuivre ceci jusqu'à ce que tout le plan soit reconstitué, puis faire de même pour les quatre autres. Les deux derniers peuvent êtres découpés pour utiliser les chutes de cartons. *Laisser sécher quelques heures. *A l'aide d'un cutter et d'une règle découper les pièces une par une sur les très pleins, évider les parties à évider. Les courbes peuvent êtres découpé à la scie à champ tourné. *Pour terminer poncer les bords des pièces découpés. miner poncer les bords des pièces découpés. )
Integrating DHT11 with Beetle ESP32 C3 and Home Assistant + (=== 1. Components Required === Before we b … === 1. Components Required === Before we begin, gather the necessary components: * '''BeetleESP32C3''' development board * '''DHT11''' temperature and humidity sensor * Jumper wires * USB cable for programming * A computer with the Arduino IDE or '''ESPHome''' installedthe Arduino IDE or '''ESPHome''' installed)
Build an Easy ISS Notifier + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
Build an Easy ISS Notifier + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
Fibonacci Clock + (Cut 4 plywood board for outside walls, 2 o … Cut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
Solar coffee roaster (using a Scheffler concentrator) + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
Solar coffee roaster (using a Scheffler concentrator) + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
Standing desk made from 2x12’ wood board and plumbers pipe + (I cut the boards to the finish length of 5’6” using a speed square to make sure I was getting a perfect right angle cut.)
Standing desk made from 2x12’ wood board and plumbers pipe + (I cut the boards to the finish length of 5’6” using a speed square to make sure I was getting a perfect right angle cut.)
Spinning Kinetic Sculpture RGB + (Cut the first svg file on 2 sheets of 300c … Cut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
Cadre Lumineux Personnalisable + (C'est le plus important et c'est ici que vous allez "perdre" le plus de temps. Il faut préparer le dessin et faire attention dans les découpes. (voir ensuite étape suivante pour la boite à encoches)
Cadre Lumineux Personnalisable + (C'est le plus important et c'est ici que vous allez "perdre" le plus de temps. Il faut préparer le dessin et faire attention dans les découpes. (voir ensuite étape suivante pour la boite à encoches)
Malinette + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
Malinette + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
Self-learning connected thermostat that optimizes heating and cooling of buildings + (First, you need hardware. In our case, tha … First, you need hardware. In our case, that means sensors for temperature and humidity, plus a motion sensor to figure out whether you're home, and relays to control the furnace and the fan. We also need a display so you can see the current temperature, and an enclosure to protect the messy bits. Breadboard the hardware (breadboarding is a non-permanent way to create an early hardware prototype). We chose a number of components for this product (see the list of components above). All in all, it took about an hour to throw together this breadboarded prototype, although we had to order the components a couple of days beforehand. It took another couple of hours to pull together working firmware (see the software section below).firmware (see the software section below).)
Self-learning connected thermostat that optimizes heating and cooling of buildings + (First, you need hardware. In our case, tha … First, you need hardware. In our case, that means sensors for temperature and humidity, plus a motion sensor to figure out whether you're home, and relays to control the furnace and the fan. We also need a display so you can see the current temperature, and an enclosure to protect the messy bits. Breadboard the hardware (breadboarding is a non-permanent way to create an early hardware prototype). We chose a number of components for this product (see the list of components above). All in all, it took about an hour to throw together this breadboarded prototype, although we had to order the components a couple of days beforehand. It took another couple of hours to pull together working firmware (see the software section below).firmware (see the software section below).)
Snap circuits tutorial + (First, you will need to 3D print the snap … First, you will need to 3D print the snap part. The stl file ready for 3D printing is available [https://drive.google.com/open?id=1N1k6RxDnZtbSd_nBgNX-ozBYsEIFRAkR here]. You can also tweak this design on [https://www.tinkercad.com/things/kYg3F6El7xx tinkercad] and make it suitable to hold 3-legged components (ex. temperature sensor, light sensor). A timelapse of the 3D printing process is available [https://drive.google.com/open?id=1GYF9cHVUO8Ps6hyx0DX7T5qe3AmTDtcx here].google.com/open?id=1GYF9cHVUO8Ps6hyx0DX7T5qe3AmTDtcx here].)
Lossless Way to Merge MP4 Files on Windows 10 + (Firstly, download the Windows version of J … Firstly, download the Windows version of Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] and install it on desktop. Then, double-click its icon to open it and simply drag all MP4 files you need to combine to its interface. Alternatively, you can do it by touching "Open File" in the lower left corner.hing "Open File" in the lower left corner.)
How to Combine MOV Files with Zero Loss + (Firstly, you need to install Joyoshare [ht … Firstly, you need to install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on your computer. Then run it and add your MOV files. To add the files, you can directly drag it to the certain position as the screen instructs or click the lower-left corner button to open files to choose.eft corner button to open files to choose.)
Replace kickstand + (Flipping the scooter carefully over.)
ESP32 Web Server with Slider + (To follow along with this tutorial, you wi … To follow along with this tutorial, you will need the following components: * An ESP32 board (I’m using the ESP32 DevKitC) * The Arduino IDE installed on your computer * The ESPAsyncWebServer and AsyncTCP libraries installed on your Arduino IDE You can find the links to download the libraries and the complete code for this project at the end of this post. for this project at the end of this post.)
Led Control with ESP Webserver + (To follow this tutorial, you need the following components: * An ESP32 development board * A USB cable to connect the ESP32 to the computer * The Arduino IDE installed on your computer * The ESP32 add-on for the Arduino IDE)
Salad tongs + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
Salad tongs + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
Cut MTS Videos without Quality Reduction + (Get Joyoshare [https://www.joyoshare.com/v … Get Joyoshare [https://www.joyoshare.com/video-cutter-win/ Video cutter] downloaded and installed on your Windows (Windows XP and later) or Mac (Mac OS X 10.8 and later). Once the program opens on your desktop, you can browse the local folder with "Open" option to add your MTS or M2TS file to the main interface. Or it's handy to efficiently drag and drop the video to the required area.g and drop the video to the required area.)
How to Play Amazon Music on LG Smart TV + (Get the latest version of AudFree [https:/ … Get the latest version of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Music Converter] installed on computer. After that, launch it and you'll be directly headed to the built-in Amazon Music web player. In the main interface, select "Sign In" and enter your licensed e-mail address and password to access your Amazon account.nd password to access your Amazon account.)
TS Joiners to Combine TS Files without Re-encoding + (Get your computer equipped with the [https://www.joyoshare.com/video-joiner/ video joiner]. From its main screen, find "Open File" to import TS files from local folder. Simply, drag and drop your TS videos to the specified area.)
MoodBoxByFaBteam + (Goal was to create a new tier to the origi … Goal was to create a new tier to the original box by using laser cutting of course but also laser engraving. An engraving pattern was found. This image file was reproduced using Inkscape and Beziers curves. This newly designed pattern was then added to the cutting pattern.ern was then added to the cutting pattern.)
MoodBoxByFaBteam + (Goal was to create a new tier to the origi … Goal was to create a new tier to the original box by using laser cutting of course but also laser engraving. An engraving pattern was found. This image file was reproduced using Inkscape and Beziers curves. This newly designed pattern was then added to the cutting pattern.ern was then added to the cutting pattern.)
Visual Gesture Controlled IoT Car + (Have you watched the movie 'Project Almana … Have you watched the movie 'Project Almanac'? Which was released in the year 2015. If not, then let me brief you a scene about it. In the movie, the main character wishes to get into MIT and therefore, builds a project for his portfolio. The project was about a drone, that could be controlled using a 2.4GHz remote controller, but when the software application on the laptop was run, the main character was seen controlling the drone with his hands in the air! The software application used a webcam to track the the movement of the character's hand movements.ovement of the character's hand movements.)
How to Play Spotify Music on TeamSpeak + (Here is the best and the most easy-to-oper … Here is the best and the most easy-to-operate solution to listen to Spotify songs on TeamSpeak. You don't need to get the complicated TeamSpeak Spotify bot. That is to download Spotify songs to TeamSpeak-supported audio formats such as MP3, AAC, or WAV. Then you can add the download to the VOIP communication for playing without the Spotify app. What you need is just a reliable Spotify downloader: the [https://www.audfun.com/spotify-music-converter.html '''AudFun Spotify Music Converter''']. It specializes in downloading and converting any audio files from [https://www.audfun.com/spotify/convert-spotify-to-wav.html Spotify to WAV], MP3, AAC, FALC, M4A, and M4B. With its top-notch conversion technology, 100% original audio quality and lossless ID3 tags can be retained afterward.ssless ID3 tags can be retained afterward.)
Home Assistance on Windows + ('''Home Assistant''' is an open-source hom … '''Home Assistant''' is an open-source home automation platform that acts as the central hub for managing your smart home. Here are some key features: '''Integration with Over 1000 Brands''': Home Assistant plays well with a vast array of devices and services. From smart lights and thermostats to security cameras and voice assistants, it integrates seamlessly. Once you set up your devices, Home Assistant automatically scans your network and allows you to configure them easily. '''Powerful Automation:''' Imagine your home working for you! With Home Assistant’s advanced automation engine, you can create custom rules and triggers.
Examples:
Turn on the lights when the sun sets.
Receive an alert if you accidentally leave the garage door open.
'''Extendable with Add-Ons''': Home Assistant isn’t limited to its core functionality. You can easily install additional applications (add-ons) to enhance your setup.
Examples:
Run AdGuard for DNS-based ad blocking.
Use NodeRed for third-party automation.
Turn Home Assistant into a Spotify Connect target.
'''Local Data Privacy''': Unlike cloud-based solutions, Home Assistant keeps your data local. It communicates directly with your devices without relying on external servers. Your privacy is preserved, and no data is stored in the cloud. '''Companion Mobile Apps''': Control your devices and receive notifications using the official Home Assistant apps. These apps also enable presence detection, allowing you to trigger automation based on your location. Rest assured, your data is sent directly to your home, with no third-party access. '''Installation Options:''' '''Home Assistant OS''': A ready-to-use image for devices like Raspberry Pi, Odroid, or Intel NUC. '''Home Assistant Supervised''': Install Home Assistant on a generic Linux system using Docker. '''Home Assistant Container''': Run Home Assistant in a Docker container. '''Home Assistant Core''': For advanced users who prefer manual installation on Python environments. By setting it up in a virtual machine, you can experiment with Home Assistant without affecting your primary Windows environment. === Prerequisites: === * '''Windows 11''': Ensure you’re running Windows 11 on your host machine. * '''VirtualBox''': Download and install VirtualBox if you haven’t already.re you’re running Windows 11 on your host machine. * '''VirtualBox''': Download and install VirtualBox if you haven’t already.)
Financial literacy with Makey Makey + (Important! to avoid problems you need to a … Important! to avoid problems you need to add an end to your code. In this example, when the bucket value will be equal to the price, that will mark the end of the code. We need to add an IF (yellow) and use the Operator (light green) ‘... = ....’ in our case we will add our variables (bucket from Data (orange). our variables (bucket from Data (orange).)
SenseCAP M2: IN865 LoRa Gateway, 4G-Ready Deployment + (In my initial foray into LoRa technologies … In my initial foray into LoRa technologies, I developed a single-channel LoRa Gateway. This gateway was designed to connect with only one end node (Sensors) at a time. Communication with application servers was facilitated through Wi-Fi connectivity embedded within the gateway itself. My Wi-Fi Backhaul single channel LoRa Gateway Project Link: https://www.hackster.io/vinayyn/single-channel-lora-gateway-using-wio-e5-lora-and-blynk-20b9ec Ethernet Backhaul single channel LoRa Gateway Project Link: https://www.hackster.io/vinayyn/ethernet-enhanced-lora-gateway-minimizing-delay-017503 After days of working on the project, I wanted to connect multiple End Nodes (Sensors) with significantly reduced power consumption. I updated them to the LoRaWan by modifying the firmware. When I started looking for a gateway to connect the multiple End nodes, I found that the gateway costs were too high and they did not fit into my budget. After conducting thorough research, I reached out to numerous manufacturers and distributors worldwide, only to discover that their gateway prices consistently fell around $500. They highlighted the outdoor compatibility and expansive coverage capabilities of their products. My investigation further revealed that all manufacturers utilized the [https://www.semtech.com/products/wireless-rf/lora-core/sx1301 Semtech SX130X] baseband LoRa® chip for gateways, with antenna specifications tailored to regional ISM bands and operating ranges. Most of their products offered Wifi and Ethernet Backhaul exclusively. I concluded that these gateways were not suitable for outdoor implementation due to the need for a physical connection to the gateway. Subsequently, I identified a few gateways equipped with 2G/3G/4G support. However, these features came at an additional cost of $100-$300 USD, and their parameter specifications varied from country to country, rendering them incompatible in my region. While scouring manufacturer and reseller websites, I stumbled upon [https://www.seeedstudio.com/SenseCAP-c-1825.html SenseCAP products] on the [https://www.seeedstudio.com/ Seeed Studio] website. The gateways' starting price was $99 for Ethernet and Wi-Fi backhaul and $149 for Wifi, Ethernet, and 2G/3G/4G Support. I then contacted a member of their technical team to inquire about 4G band compatibility in India. The team provided me with the necessary details, prompting me to reach out to an Indian network operator for their technical specifications. EU868 4G Version Suppotive Bands Upon signing an NDA with the network provider, they furnished the requested details. However, further investigation revealed that this information was readily available on the Indian Government's Telecommunication portal. The results were favorable as the SenseCAP Multi-Platform LoRaWAN Indoor Gateway(SX1302-4G) - EU868 aligned with the operating parameters. '''Indian 4G Band Details''' '''"LTE-FDD:B1/B3/B7/B20 LTE-TDD: B40/B41"''' Without hesitation, I procured the [https://www.seeedstudio.com/SenseCAP-Multi-Platform-LoRaWAN-Indoor-Gateway-SX1302-4G-EU868-p-5599.html SenseCAP Multi-Platform LoRaWAN Indoor Gateway(SX1302-4G) - EU868] at $149, including $30 shipping and $90 Indian customs fees.U868] at $149, including $30 shipping and $90 Indian customs fees.)
Timelapes with Raspberry Pi Camera + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
Word Clock + (Lay the acrylic backing on top of the sten … Lay the acrylic backing on top of the stencil, and mark out a cut line, then using a straight edge and a sharp hobby knife (or scalpel), cut the sheet to size. Next, ensure that your working environment is clean – vacuum your table if necessary – or work inside the house, instead of the garage. Lock up your Golden Retriever dog and your cats. If you get small particles between the vinyl and the Perspex, you will have enormous trouble making the surface look flat. Spend some time 'weeding' the stencil, by removing the letters that you don't want there on the final stencil. The removed letters will provide space for the light to shine through. Once you have removed all of the letters (being careful to leave the centres of letters such as 'A' and 'P' behind), apply some masking tape along each row so that when we remove the backing sheet, the centres of the letters stay in the correct spot on the stencil.s stay in the correct spot on the stencil.)
Colorado Top Bar Assembly + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step).

We have used the Victron Phoenix-Inverter-350 with a spec of 350 VA, 24 V and dimensions of 72mm (H) x155mm (W) x237mm (D). If you use a different inverter, it will probably have a different form factor, and you will likely have to adjust the .DXF files accordingly.

If you don't have access or prefer not to use a laser cutter, the inner structures can also be built by hand using normal wood crafting techniques with a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.

a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step).

We have used the Victron Phoenix-Inverter-350 with a spec of 350 VA, 24 V and dimensions of 72mm (H) x155mm (W) x237mm (D). If you use a different inverter, it will probably have a different form factor, and you will likely have to adjust the .DXF files accordingly.

If you don't have access or prefer not to use a laser cutter, the inner structures can also be built by hand using normal wood crafting techniques with a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.

a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
Simple Steps of How to Combine Videos on Mac + (Make sure that you have install the latest … Make sure that you have install the latest version of [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] for Mac on your computer. Next, open it and simply drag videos to be combined to its mian interface. Alternatively, click the "Open File" button located in the lower left corner to add video files. the lower left corner to add video files.)
How to draw a cat + (Make sure your circle is a little bit to the left of the middle of your paper. This will become the middle part of the body of the cat, so please make sure to leave enough space on the top and the bottom of your paper.)
How to Track the ISS Location with Node-RED + (Node-RED is a visual programming tool that allows you to create flows of data and logic using nodes. In this article, we will use Node-RED to track the location of the International Space Station (ISS) and display it on a world map.)
PP Shredder Pro + (<nowiki>====Tools==== non … ====Tools====
none
====Parts====
1110.08 - Bearing Side Plate 4

1110.09 - Bearing Side Plate 5

1110.10 - Bearing Side Plate 6

1110.11 - Gear Plate

1110.01 - Top Plate

====Steps====

#Layout the remaining pies as seen in image 1.
#Slide plate 1110.08 directly on top of piece 1110.07
#Drop in plate 1110.09 directly next to 1110.07/.08 in the open tabs.
#Place the bottom tabs of plate 1110.10 into the bottom plate, and then fold the plate upwards into place.
#Place plate 1110.11 on top as seen in image 5.
#Place plate 1110.01 on top, securing the entire box in place.

*Note - in the next steps, you will dismantle these last few steps, but it is important to understand how the box comes together.

t;br /> </nowiki>)

ESP32 MQTT + (<nowiki>Copy the full code into your … Copy the full code into your IDE. Feel free to change things like the text it prints, etc

1 #include
2 #include
3
4 // WiFi
5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
6 const char *password = "xxxxx"; // Enter Wi-Fi password
7
8 // MQTT Broker
9 const char *mqtt_broker = "broker.emqx.io";
10 const char *topic = "emqx/esp32";
11 const char *mqtt_username = "emqx";
12 const char *mqtt_password = "public";
13 const int mqtt_port = 1883;
14
15 WiFiClient espClient;
16 PubSubClient client(espClient);
17
18 void setup() {
19 // Set software serial baud to 115200;
20 Serial.begin(115200);
21 // Connecting to a WiFi network
22 WiFi.begin(ssid, password);
23 while (WiFi.status() != WL_CONNECTED) {
24 delay(500);
25 Serial.println("Connecting to WiFi..");
26 }
27 Serial.println("Connected to the Wi-Fi network");
28 //connecting to a mqtt broker
29 client.setServer(mqtt_broker, mqtt_port);
30 client.setCallback(callback);
31 while (!client.connected()) {
32 String client_id = "esp32-client-";
33 client_id += String(WiFi.macAddress());
34 Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
35 if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
36 Serial.println("Public EMQX MQTT broker connected");
37 } else {
38 Serial.print("failed with state ");
39 Serial.print(client.state());
40 delay(2000);
41 }
42 }
43 // Publish and subscribe
44 client.publish(topic, "Hi, I'm ESP32 ^^");
45 client.subscribe(topic);
46 }
47
48 void callback(char *topic, byte *payload, unsigned int length) {
49 Serial.print("Message arrived in topic: ");
50 Serial.println(topic);
51 Serial.print("Message:");
52 for (int i = 0; i < length; i++) {
53 Serial.print((char) payload[i]);
54 }
55 Serial.println();
56 Serial.println("-----------------------");
57 }
58
59 void loop() {
60 client.loop();
61 }
i">0; i < length; i++) { 53 Serial.print((char) payload[i]); 54 } 55 Serial.println(); 56 Serial.println("-----------------------"); 57 } 58 59 void loop() { 60 client.loop(); 61 } </pre></div></nowiki>)

How to Play Spotify to Yoto Player without Premium + (<nowiki>Once the Spotify music you w … Once the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music.

'''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.

'''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.

'''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.

'''Step 4.''' Select ''''Add Audio'''' from the options.

'''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.

'''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).

'''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.

'''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.

' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app. </nowiki>)

Streaming FireBeetle ESP32 Camera Video to Home Assistance + (<nowiki>Open the Arduino IDE and nav … Open the Arduino IDE and navigate to the ESP32 examples.

1. Select File->Examples->ESP32->Camera->CameraWebServer example in Arduino IDE.

2. Replace the codes in CameraWebServer with the code below (Note: please fill in your WiFi account and password)
#include "esp_camera.h"
#include

//
// WARNING!!! PSRAM IC required for UXGA resolution and high JPEG quality
// Ensure ESP32 Wrover Module or other board with PSRAM is selected
// Partial images will be transmitted if image exceeds buffer size
//
// You must select partition scheme from the board menu that has at least 3MB APP space.
// Face Recognition is DISABLED for ESP32 and ESP32-S2, because it takes up from 15
// seconds to process single frame. Face Detection is ENABLED if PSRAM is enabled as well

// ===================
// Select camera model
// ===================
#define PWDN_GPIO_NUM -1
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 45
#define SIOD_GPIO_NUM 1
#define SIOC_GPIO_NUM 2

#define Y9_GPIO_NUM 48
#define Y8_GPIO_NUM 46
#define Y7_GPIO_NUM 8
#define Y6_GPIO_NUM 7
#define Y5_GPIO_NUM 4
#define Y4_GPIO_NUM 41
#define Y3_GPIO_NUM 40
#define Y2_GPIO_NUM 39
#define VSYNC_GPIO_NUM 6
#define HREF_GPIO_NUM 42
#define PCLK_GPIO_NUM 5

#include "DFRobot_AXP313A.h"

DFRobot_AXP313A axp;

// ===========================
// Enter your WiFi credentials
// ===========================
const char* ssid = "*****";
const char* password = "******";

void startCameraServer();

void setup() {
Serial.begin(115200);
Serial.setDebugOutput(true);
Serial.println();
while(axp.begin() != 0){
Serial.println("init error");
delay(1000);
}
axp.enableCameraPower(axp.eOV2640);//Enable the power for camera
camera_config_t config;
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = Y2_GPIO_NUM;
config.pin_d1 = Y3_GPIO_NUM;
config.pin_d2 = Y4_GPIO_NUM;
config.pin_d3 = Y5_GPIO_NUM;
config.pin_d4 = Y6_GPIO_NUM;
config.pin_d5 = Y7_GPIO_NUM;
config.pin_d6 = Y8_GPIO_NUM;
config.pin_d7 = Y9_GPIO_NUM;
config.pin_xclk = XCLK_GPIO_NUM;
config.pin_pclk = PCLK_GPIO_NUM;
config.pin_vsync = VSYNC_GPIO_NUM;
config.pin_href = HREF_GPIO_NUM;
config.pin_sscb_sda = SIOD_GPIO_NUM;
config.pin_sscb_scl = SIOC_GPIO_NUM;
config.pin_pwdn = PWDN_GPIO_NUM;
config.pin_reset = RESET_GPIO_NUM;
config.xclk_freq_hz = 20000000;
config.frame_size = FRAMESIZE_UXGA;
config.pixel_format = PIXFORMAT_JPEG; // for streaming
//config.pixel_format = PIXFORMAT_RGB565; // for face detection/recognition
config.grab_mode = CAMERA_GRAB_WHEN_EMPTY;
config.fb_location = CAMERA_FB_IN_PSRAM;
config.jpeg_quality = 12;
config.fb_count = 1;

// if PSRAM IC present, init with UXGA resolution and higher JPEG quality
// for larger pre-allocated frame buffer.
if(config.pixel_format == PIXFORMAT_JPEG){
if(psramFound()){
config.jpeg_quality = 10;
config.fb_count = 2;
config.grab_mode = CAMERA_GRAB_LATEST;
} else {
// Limit the frame size when PSRAM is not available
config.frame_size = FRAMESIZE_SVGA;
config.fb_location = CAMERA_FB_IN_DRAM;
}
} else {
// Best option for face detection/recognition
config.frame_size = FRAMESIZE_240X240;
#if CONFIG_IDF_TARGET_ESP32S3
config.fb_count = 2;
#endif
}

#if defined(CAMERA_MODEL_ESP_EYE)
pinMode(13, INPUT_PULLUP);
pinMode(14, INPUT_PULLUP);
#endif

// camera init
esp_err_t err = esp_camera_init(&config);
if (err != ESP_OK) {
Serial.printf("Camera init failed with error 0x%x", err);
return;
}

sensor_t * s = esp_camera_sensor_get();
// initial sensors are flipped vertically and colors are a bit saturated
if (s->id.PID == OV3660_PID) {
s->set_vflip(s, 1); // flip it back
s->set_brightness(s, 1); // up the brightness just a bit
s->set_saturation(s, -2); // lower the saturation
}
// drop down frame size for higher initial frame rate
if(config.pixel_format == PIXFORMAT_JPEG){
s->set_framesize(s, FRAMESIZE_QVGA);
}

#if defined(CAMERA_MODEL_M5STACK_WIDE) || defined(CAMERA_MODEL_M5STACK_ESP32CAM)
s->set_vflip(s, 1);
s->set_hmirror(s, 1);
#endif

#if defined(CAMERA_MODEL_ESP32S3_EYE)
s->set_vflip(s, 1);
#endif

WiFi.begin(ssid, password);
WiFi.setSleep(false);

while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");

startCameraServer();

Serial.print("Camera Ready! Use 'http://");
Serial.print(WiFi.localIP());
Serial.println("' to connect");
}

void loop() {
// Do nothing. Everything is done in another task by the web server
delay(10000);
}
Then upload the code to the FireBeetle ESP32 S3 board and look for the serial terminal response.an class="n">WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.println("WiFi connected"); startCameraServer(); Serial.print("Camera Ready! Use 'http://"); Serial.print(WiFi.localIP()); Serial.println("' to connect"); } void loop() { // Do nothing. Everything is done in another task by the web server delay(10000); } </pre></div>Then upload the code to the FireBeetle ESP32 S3 board and look for the serial terminal response.</nowiki>)

EMI probe 9-11 + (<nowiki>Whether you re using an ardu … Whether you re using an arduino uno or a nano, the code that you ll need to upload in order for the probe to function correctly is basically the same.

Just make sure to program the correct digital pin for the piezo speaker. In the instructions above, we connected the speaker on D9 on an arduino uno, and D3 on an arduino nano.

// Arduino Electromagnetic interference detector

// Code modified by Patrick Di Justo, based on

// Aaron ALAI EMF Detector April 22nd 2009 VERSION 1.0

// aaronalai1@gmail.com

//

// This outputs sound and numeric data to the 4char

#include

#define SerialIn 2

#define SerialOut 7

#define wDelay 900

int inPin = 5;

int val = 0;

SoftwareSerial mySerialPort(SerialIn, SerialOut);

void setup()

{

pinMode(SerialOut, OUTPUT);

pinMode(SerialIn, INPUT);

mySerialPort.begin(19200);

mySerialPort.print("vv");

mySerialPort.print("xxxx");

delay(wDelay);

mySerialPort.print("----");

delay(wDelay);

mySerialPort.print("8888");

delay(wDelay);

mySerialPort.print("xxxx");

delay(wDelay);

Serial.begin(9600);

}

void loop()

{

val = analogRead(inPin);

Serial.println(val);

dispData(val);

val = map(val, 1, 100, 1, 2048);

tone(9,val,10);

}

void dispData(int i)

{

if ((i<-999)lay); Serial.begin(9600); } void loop() { val = analogRead(inPin); Serial.println(val); dispData(val); val = map(val, 1, 100, 1, 2048); tone(9,val,10); } void dispData(int i) { if ((i<-999)</nowiki>)
Automated Gardening Plant with arduino Uno under the DEEDU project + (<nowiki>You will need < … You will need

electronic control and command part (listed below)

water tank

a plant in a pot

a box for electronic (https://www.thingiverse.com/thing:4106140)

3d printed light sensor support (https://www.thingiverse.com/thing:3986667)

3d printed sprinkler (https://www.thingiverse.com/thing:3986672)

For the Command & Control part the material used are the following:

- 1 Arduino UNO link

- 1 moisture sensor link

- 1 CO2 Gas sensor Mq7 link

- 1 Lcd screen 2x16 (+i2c)) link

- 1 LDR light sensor (photoresistor) link

- 2 push buttons link

- 1 Temp + humidity sensor DHT11 link

- 1 5V water pump link

- 1 5v relay link

- 3 1k resistor link

- 1 Breadbord or prototyping PCB link

-2 5v power supply linklink - 1 5V water pump link - 1 5v relay link - 3 1k resistor link - 1 Breadbord or prototyping PCB link -2 5v power supply link</nowiki>)
Best Mac AVI Trimmer to Trim AVI on Mac + (Officially download and install Joyoshare … Officially download and install Joyoshare [https://www.joyoshare.com/video-cutter-mac/ Video Trimmer Mac] on computer. Open it and follow the on-screen instruction to drag the AVI video to it. You also use the "Open" button to import an AVI file from local." button to import an AVI file from local.)
Heather Chadduck Hillegas' Redesign of the Nelson-Galt House in Colonial Williamsburg + (One of the central challenges in redesigni … One of the central challenges in redesigning a home as historically significant as the Nelson-Galt House was balancing historical authenticity with contemporary functionality. Heather achieved this balance beautifully by incorporating a variety of WILLIAMSBURG products that are inspired by 18th-century designs but updated for modern living. From the rich hues of the Williamsburg Paint Color Collection by Benjamin Moore, such as the striking Apollo Blue used in the study, to timeless Schumacher fabrics, Paul Montgomery wall coverings, Spicher floor cloths, and Adelphi Paper Hangings, Heather's choices perfectly blended the old with the new. Each room tells a story, with historical influences seamlessly integrated into modern-day aesthetics. For instance, in the living room, Heather navigated the limitations posed by the home’s historic easements with clever solutions like the brass picture rails used to hang artwork without damaging the original walls. This allowed her to introduce new decorative elements while respecting the home’s architectural integrity.ecting the home’s architectural integrity.)
Electronic textile bag + (One of the patches must be slightly bigger than the other 3.)
Electronic textile bag + (One of the patches must be slightly bigger than the other 3.)
People pedal powered computer charger + (People pedal power is a form of renewable … People pedal power is a form of renewable energy. One human can produce around 75W electric power sustained for about 15min, or 50W during a longer period. This is enough power to be able to charge an average laptop. This energy can be harvested on a PPP device. To find out more about People Pedal Power, visit our site https://ciklic.wordpress.com/2017/08/05/renewable-energy-what-can-you-expect/8/05/renewable-energy-what-can-you-expect/)
SunZilla - Guide 4: Solar box + (To physically anchor the the boxes togethe … To physically anchor the the boxes together, the joins need to be added. The joins hold the boxes in place on a wooden foot structure. This structure can be CNC-milled with the provided .DMX source file, which you can download below. You can also old-school wood-craft them, following the .PDF technical drawing, also downloadable below. After milling the foot structure, put the boxes in their places and drill 4 holes through the outside bottom rim of each box and the underlying wooden structure. Using these holes, the different parts are connected by a bent bicycle spoke. The shape of the spoke can be seen in the following figure. The shape of the spoke can be seen in the following figure bellow. The height of the “mouth” of the bent spoke depends on the thickness of the wooden foot (see diagram). It should 2-4 mm less than the added thickness of the box and the wooden foot. To bend the spoke, start from one side of the spoke and do one bending after the other by holding the spoke with pliers and bending then the longer end of the spoke with your hand in the shape you like.poke with your hand in the shape you like.)
FoldaRap 2.5 : imprimante 3D facilement transportable + ( * pied-avant-gauche: http://reprap.org/wi … * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
FoldaRap 2.5 : imprimante 3D facilement transportable + ( * pied-avant-gauche: http://reprap.org/wi … * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
Plug and Make + (Poncez avec la feuille abrasive les deux s … Poncez avec la feuille abrasive les deux surfaces des panneaux de contreplaqués. À partir du fichier vectoriel (.svg), découpez à la machine laser une plaque 500mm x 400mm et une plaque 900mm x 200mm par panneau de contreplaqué. À partir des fichiers 3D (.stl), imprimez à l’imprimante 3D filament les plugs nécessaires au mode organiseur de bureau, au mode table basse et au mode organiseur d’entrée, pour ces modes se référer à la notice d’assemblage.modes se référer à la notice d’assemblage.)
Plug and Make + (Poncez avec la feuille abrasive les deux s … Poncez avec la feuille abrasive les deux surfaces des panneaux de contreplaqués. À partir du fichier vectoriel (.svg), découpez à la machine laser une plaque 500mm x 400mm et une plaque 900mm x 200mm par panneau de contreplaqué. À partir des fichiers 3D (.stl), imprimez à l’imprimante 3D filament les plugs nécessaires au mode organiseur de bureau, au mode table basse et au mode organiseur d’entrée, pour ces modes se référer à la notice d’assemblage.modes se référer à la notice d’assemblage.)
EMI probe + (It is possible to assemble an EMI probe us … It is possible to assemble an EMI probe using an arduino Uno or an arduino nano. A timelapse of the assembly process of an EMI probe based on arduino nano. A video of the assembly process of an EMI probe based on arduino uno ''wiring diagram for the EMI probe'' To begin with, solder 3 male headers on the PCB. When you will plug the PCB onto the arduino board, the headers will have to go into pin 9, GND, and Analaog5. Solder the speaker onto the PCB. The positive leg of the speaker need to be connected to the male header going into pin 9 of the arduino board. The other leg (negative leg) of the speaker needs be connected to one end of the resistor (via some hook up wire). Now, solder the resistor onto the PCB. Connect one end of the resistor to the male header going into GND on the arduino board. Connect the other end to the header going into A5. Grab a piece of solid core wire about 20 cm long, and solder one end in correspondence with the male header going into A5. Your EMI probe is ready.r going into A5. Your EMI probe is ready.)
Fabrication 3ème étage Bentolux + (Premièrement, j'ai dessiner ,à l'aide de T … Premièrement, j'ai dessiner ,à l'aide de Tinkercad, ce à quoi aller ressembler mon 3ème étage. J'ai fait attention à laisser un trou sur le somme de l'étage pour laisse passer le capteur de pulsation, ainsi qu'un interstice sur un des côté pour laisser passer le servomoteur. J'ai également penser à dessiner les picot, qui me permettront d'assembler le 3ème et le 2ème étage ensemble sans avoir à les coller ensemble.ensemble sans avoir à les coller ensemble.)
Brode un écusson personnalisé + (Présentation succincte de l’atelier. Nous allons créer un dessin sur l’ordinateur et le réaliser ensuite en broderie.)
SunZilla - Setup manual + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
SunZilla - Setup manual + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
Détecteur de présence avec un Arduino + (Le programme utilise la librairie Ultrason … Le programme utilise la librairie Ultrasonic. Il faut donc l’installer, c’est-à-dire la copier dans votre répertoire Mes documents / Arduino / librairies. Le programme va paramétrer le module ultrason grâce au commande de la librairie (Pour plus d’info http://wiki.tetrasys-design.net/HCSR04Ultrasonic), ensuite il compare à une valeur enregistrer si il détecte un objet ou une personne à moins de cette distance on allume la LED sinon on l’éteint. #include const int Trig = 12; // pin "Trig" du HC-SR04 connectée à pin 13 de l'Arduino const int Echo = 13; // pin "Echo" du HC-SR04 connectée à pin 12 de l'Arduino const int LED = 1; // pin connecté à la LED + resistance const int green = 10; // LEDs reliées aux pins de l'Arduino via une résistance const int yellow = 11; // de 150 Ohms. const int red = 12; long cm; // variable pour stocker la distance de l'objet en cm Ultrasonic HCSR04(Trig,Echo); void setup() { pinMode(LED, OUTPUT); } void loop() { cm = HCSR04.convert(HCSR04.timing(), 1); if(cm > 0 && cm < 20) // Il y a une présence { digitalWrite(LED, HIGH); // Allumer la LED delay(10); // Temps de traitement } else if(cm >= 20) // Il n'y a pas de présence { digitalWrite(LED, LOW); // Eteindre la LED delay(10); // Temps de traitement } }indre la LED delay(10); // Temps de traitement } })
Détecteur de présence avec un Arduino + (Le programme utilise la librairie Ultrason … Le programme utilise la librairie Ultrasonic. Il faut donc l’installer, c’est-à-dire la copier dans votre répertoire Mes documents / Arduino / librairies. Le programme va paramétrer le module ultrason grâce au commande de la librairie (Pour plus d’info http://wiki.tetrasys-design.net/HCSR04Ultrasonic), ensuite il compare à une valeur enregistrer si il détecte un objet ou une personne à moins de cette distance on allume la LED sinon on l’éteint. #include const int Trig = 12; // pin "Trig" du HC-SR04 connectée à pin 13 de l'Arduino const int Echo = 13; // pin "Echo" du HC-SR04 connectée à pin 12 de l'Arduino const int LED = 1; // pin connecté à la LED + resistance const int green = 10; // LEDs reliées aux pins de l'Arduino via une résistance const int yellow = 11; // de 150 Ohms. const int red = 12; long cm; // variable pour stocker la distance de l'objet en cm Ultrasonic HCSR04(Trig,Echo); void setup() { pinMode(LED, OUTPUT); } void loop() { cm = HCSR04.convert(HCSR04.timing(), 1); if(cm > 0 && cm < 20) // Il y a une présence { digitalWrite(LED, HIGH); // Allumer la LED delay(10); // Temps de traitement } else if(cm >= 20) // Il n'y a pas de présence { digitalWrite(LED, LOW); // Eteindre la LED delay(10); // Temps de traitement } }indre la LED delay(10); // Temps de traitement } })
Losslessly Combine WebM Files in 2020 + (Quickly download and install Joyoshare [ht … Quickly download and install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on Windows or Mac. After that, you should open it and click "Open File" to choose your WebM files. Alternatively, you can drag and drop files from desktop to the program.nd drop files from desktop to the program.)
The Journey of Designer Sara Story's Inspiring Manhattan Home + (Sara and her husband quickly moved into th … Sara and her husband quickly moved into the space, which required some creative thinking. To make room for their growing family, they converted a closet into a nursery for their baby. What began as a modest one-bedroom apartment soon evolved into something much greater. Over the span of 20 years, Sara and her husband purchased nine additional apartments in the same building, eventually combining them into a spacious, warm, and inviting home for their family. This beautifully layered space became a sanctuary for the couple, their three children, and two dogs.ouple, their three children, and two dogs.)
Mighty maker level belt + (Set up a temporary circuit using a bread b … Set up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
Conductive paint + Makey Makey + (Simply mix the glue with the graphite powd … Simply mix the glue with the graphite powder in equal parts. You can add more glue than graphite powder if you believe you don’t have enough powder. When done, add water as needed to reach the desired consistency. Your mixture needs to have roughly the same consistency as real paint. Watch [https://www.youtube.com/watch?v=phEke_LZJlk this] video for extra help.?v=phEke_LZJlk this] video for extra help.)
Présentoir lumineux pour super héros et monuments découpés en mdf et pmma à partir de dessins d'enfants + (Je souhaitais ajouter une touche de couleu … Je souhaitais ajouter une touche de couleur à la scène avec un arc en ciel découpé en PMMA souple qui serait simplement posé sur le présentoir. Pour cela on utilise un plug in pour inkscape appelé [https://www.thingiverse.com/thing:203940 "living hinges"] Après pas mal de tests, pour du PMMA 3mm les réglages suivants du plug in sont les plus adaptés : cut length : 19 gam length : 2 separation distance : 2. Des bandes de 20 mm x 300 mm sont découpées dans du pmma de 3mm de quatre couleurs (bleu, vert, jaune, orangé) et ajourées (fichier : arcenciel_supersoleil.svg) comme figuré sur l'image 1. On découpe également super soleil dans les trois couleurs rouge, orange, jaune ainsi que la pince qui servira à épingler super soleil à l'arc en ciel, solidarisera ce dernier et permettra à super soleil de coulisser le long de l'arc en ciel (PMMA 10 mm). Chaque bande de l'arc en ciel doit être légèrement plus courte que la précédente. On coupe donc environ la bande jaune de 1 cm, la verte de 2 cm, la bleue de 3 cm. (image 3) On teste ensuite le placement de l'arc en ciel sur le présentoir. Super soleil viendra s'épingler ensuite dessous.soleil viendra s'épingler ensuite dessous.)
Présentoir lumineux pour super héros et monuments découpés en mdf et pmma à partir de dessins d'enfants + (Je souhaitais ajouter une touche de couleu … Je souhaitais ajouter une touche de couleur à la scène avec un arc en ciel découpé en PMMA souple qui serait simplement posé sur le présentoir. Pour cela on utilise un plug in pour inkscape appelé [https://www.thingiverse.com/thing:203940 "living hinges"] Après pas mal de tests, pour du PMMA 3mm les réglages suivants du plug in sont les plus adaptés : cut length : 19 gam length : 2 separation distance : 2. Des bandes de 20 mm x 300 mm sont découpées dans du pmma de 3mm de quatre couleurs (bleu, vert, jaune, orangé) et ajourées (fichier : arcenciel_supersoleil.svg) comme figuré sur l'image 1. On découpe également super soleil dans les trois couleurs rouge, orange, jaune ainsi que la pince qui servira à épingler super soleil à l'arc en ciel, solidarisera ce dernier et permettra à super soleil de coulisser le long de l'arc en ciel (PMMA 10 mm). Chaque bande de l'arc en ciel doit être légèrement plus courte que la précédente. On coupe donc environ la bande jaune de 1 cm, la verte de 2 cm, la bleue de 3 cm. (image 3) On teste ensuite le placement de l'arc en ciel sur le présentoir. Super soleil viendra s'épingler ensuite dessous.soleil viendra s'épingler ensuite dessous.)
Word Clock + (Start assembly by making the stencil. You … Start assembly by making the stencil. You can either get a stencil cut by a local sign writer to your own design, or use a pre-cut vinyl stencil from my web site. I have always felt that the clock looks more majestic if there is a border around the letters (I normally use about a 30mm border), but you can use whatever size you would like. Vinyl by itself is floppy, so it needs to be attached to a clear acrylic (Perspex) backing sheet to provide rigidity. Make sure that the acrylic sheet is the size you want the final clock to be.

Before you start, mix up a couple of drops of dish washing liquid with a cup of water, and load that into a spray bottle. We will use this to make applying the vinyl lots easier.

The vinyl stencil as supplied will typically be larger than required. This is so as to provide extra material for variations in face sizes. We need to cut the vinyl stencil to the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.o the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.)

Eigenschaft	Typischer Wert
'''Speicherkapazität'''	5 – 15 kWh
'''Entladeleistung'''	3 – 10 kW
'''Batterietyp'''	Lithium-Ionen oder LiFePO4
'''Wirkungsgrad'''	90 – 97 %
'''Erweiterbarkeit'''	Teilweise modular
'''Kommunikation'''	WLAN, LAN, RS485, CAN, App-Anbindung
'''Maße & Gewicht'''	Kompakt, meist wandmontierbar