Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

Poser des plaquettes de parement + (Protégez-vous et découpez la briquette à la meuleuse.)
Desk lamp in wood and concrete + (Put a mark on the batten, to cut it in 2 battens of 44cm length)
Desk lamp in wood and concrete + (Put a mark on the batten, to cut it in 2 battens of 44cm length)
Dôme Géodésique Fréquence 2 paramétrable + (Quel que soit le diamètre d’un dôme de fréquence 2, les angles des montants sont toujours identiques : 16 et 18 degrés respectivement pour les types A et B.)
Humanure Dry Toilets, low-tech tricks + (Refer to the pictures available in the gal … Refer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
Humanure Dry Toilets, low-tech tricks + (Refer to the pictures available in the gal … Refer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
Chauffage solaire version ardoise + ('''Remarque''': Ici, le cadre est dimensio … '''Remarque''': Ici, le cadre est dimensionné pour accueillir une vitre de 1m x 2m par 6mm d'épaisseur, un fond en contreplaqué filmé de 10mm et une couche isolante de 22mm en STEICO. Les dimensions seront donc à adapter en fonction des disponibilités de chacun. * Préparer 2 chevrons de section 93mm x 45mm et de 209 cm de longueur. * Préparer 2 chevrons de section 93mm x 45mm et de 109 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 209 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 109 cm de longueur. * Coller à la colle PU et visser les liteaux sur les chevrons associés une face de 93mm d'épaisseur, à 32mm d'un des bords. '''Remarque''': Ces 32mm correspondent à l'épaisseur isolant + contreplaqué filmé. Il reste 8mm sur l'autre bord afin d'accueillir l'épaisseur de la vitre et d'un joint compribande. * Découper les angles de chaque profilé bois ainsi obtenu à 45° en portant bien l'attention sur le sens de la découpe. La coupe se fait sur la longueur de 93mm. '''Remarque''': Cette coupe permet de retrouver la dimension 1m x 2m de la vitre en intérieur du cadre. * Assembler le cadre à l'aide de colle PU et de longues vis à bois dans chacun des 4 angles.ngues vis à bois dans chacun des 4 angles.)
Chauffage solaire version ardoise + ('''Remarque''': Ici, le cadre est dimensio … '''Remarque''': Ici, le cadre est dimensionné pour accueillir une vitre de 1m x 2m par 6mm d'épaisseur, un fond en contreplaqué filmé de 10mm et une couche isolante de 22mm en STEICO. Les dimensions seront donc à adapter en fonction des disponibilités de chacun. * Préparer 2 chevrons de section 93mm x 45mm et de 209 cm de longueur. * Préparer 2 chevrons de section 93mm x 45mm et de 109 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 209 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 109 cm de longueur. * Coller à la colle PU et visser les liteaux sur les chevrons associés une face de 93mm d'épaisseur, à 32mm d'un des bords. '''Remarque''': Ces 32mm correspondent à l'épaisseur isolant + contreplaqué filmé. Il reste 8mm sur l'autre bord afin d'accueillir l'épaisseur de la vitre et d'un joint compribande. * Découper les angles de chaque profilé bois ainsi obtenu à 45° en portant bien l'attention sur le sens de la découpe. La coupe se fait sur la longueur de 93mm. '''Remarque''': Cette coupe permet de retrouver la dimension 1m x 2m de la vitre en intérieur du cadre. * Assembler le cadre à l'aide de colle PU et de longues vis à bois dans chacun des 4 angles.ngues vis à bois dans chacun des 4 angles.)
IKEA hack: TARVA Chest of 3 drawers in pine + (Remove the drawer handles with your screwdriver.)
IKEA hack: TARVA Chest of 3 drawers in pine + (Remove the drawer handles with your screwdriver.)
The Journey of Designer Sara Story's Inspiring Manhattan Home + (Sara and her husband quickly moved into th … Sara and her husband quickly moved into the space, which required some creative thinking. To make room for their growing family, they converted a closet into a nursery for their baby. What began as a modest one-bedroom apartment soon evolved into something much greater. Over the span of 20 years, Sara and her husband purchased nine additional apartments in the same building, eventually combining them into a spacious, warm, and inviting home for their family. This beautifully layered space became a sanctuary for the couple, their three children, and two dogs.ouple, their three children, and two dogs.)
MANGEOIRE à oiseaux en bois de PALETTES, sans clous ni vis ! + (Scier la palette de sorte à récupérer un é … Scier la palette de sorte à récupérer un élément (deux cubes avec les planches les englobant) qui vous servira comme « élément de base » auquel vous rajouterez quelques planches récupérées de la même palette pour les imbriquer sur « l’élément de base ». Regarder la vidéo pour suivre la construction pas à pas. Pour visualiser comment les éléments s’imbriquent entre eux referez-vous à la coupe à travers la mangeoire, jointe ci-dessous dans l’étape 2. Faire attention à choisir une palette non traitée chimiquement. Vous trouverez des instructions ici : https://www.bricolage-facile.net/les-palettes-sont-elles-toxiques/cile.net/les-palettes-sont-elles-toxiques/)
3D CNC milling avec CAM Fusion 360 + (<section class="step"><br />Be …

Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.

3D Toolpathing

If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.

When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.

Workholding

Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.

When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.

But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.

In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.

Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.

For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.

Registration

Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.

If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.

This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:

--Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed

--Machining a contour into your spoiler board, then placing your stock exactly inside that contour

--Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)

This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.

CAM Settings

The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths. 

 -Tool numbering

If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.

Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.

If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.

-Rules for roughing

Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.

When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.
lt;br />Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.<br /><br />When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.<br /></section>)
Mighty maker level belt + (Set up a temporary circuit using a bread b … Set up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
PP Shredder Basic + (1/2" Socket wrench 11/16" Socket" 6mm Allen/Hex Wrench Locking Pliers Adjustable pliers Metal File Screwdriver <br/>)
Water probe + (Solder a strip of male headers (about 10 p … Solder a strip of male headers (about 10 pins) onto the PCB. Beware that one pin needs to go into GND on the arduino board, another one into A5 and a third one into A0. Grab the 10kOhm resistor. Solder one end onto the header pin which goes into GND on the arduino board, the other end of the resistor onto the header pin which end on A0 in the arduino board. This way the resistor will basically create a bridge between GND and A0 on the arduino board. Grab two pieces of solid core wire (about 30cm long each) and strip both ends of each piece. Solder one end of the first wire onto the header pin which ends in A5; solder one end of the second piece of wire onto the header pin which ends in A0 on the arduino board. Connect the other ends of the pieces of solid core wire to the binding post. One end goes into the red part of the post, the other end goes into the black part of the binding post. Now cut two pieces of solid core wire (about 10 cm long each), and strip both ends of each wire. Connect one end of each piece of wire to the metal ends of the binding post. Use the bolts to secure the solid core wire in place. Curl the other ends. Lastly, try placing the PCB on the arduino board, and make sure that one pin goes into GND, another into A0 and a third pin into A5., another into A0 and a third pin into A5.)
SolarOSE : concentrateur solaire thermique linéaire de fresnel + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
SolarOSE : concentrateur solaire thermique linéaire de fresnel + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
Eclairage de cave sur batterie 12V + (On soude l'ensemble des composant sur la c … On soude l'ensemble des composant sur la carte ''protoboard,'' sauf le microcontrôleur ATtiny85 qu'il va falloir programmer. Par contre, on peut souder son support ;) Attention au sens des composants ! * microcontrôleur (en bleu): encoche vers l'extérieur (cf fêche) * LED neopixel :en bleu Din (avec la résistance 1 komh) , rouge 5V et noir GND avec le condensateur 0.1µF (céramique) entre le 5V et GND * les deux autres résitance forme un pont diviseur de tension. attention à leurs emplacements relatifs sous peine de tuer le microcontrôleur!ifs sous peine de tuer le microcontrôleur!)
Eclairage de cave sur batterie 12V + (On soude l'ensemble des composant sur la c … On soude l'ensemble des composant sur la carte ''protoboard,'' sauf le microcontrôleur ATtiny85 qu'il va falloir programmer. Par contre, on peut souder son support ;) Attention au sens des composants ! * microcontrôleur (en bleu): encoche vers l'extérieur (cf fêche) * LED neopixel :en bleu Din (avec la résistance 1 komh) , rouge 5V et noir GND avec le condensateur 0.1µF (céramique) entre le 5V et GND * les deux autres résitance forme un pont diviseur de tension. attention à leurs emplacements relatifs sous peine de tuer le microcontrôleur!ifs sous peine de tuer le microcontrôleur!)
Boîte à ombres personnalisée + ( # Soudez tous les rubans de LEDs en respectant la polarité. # Soudez le ruban de LED du bas à l'alimentation. )
Boîte à ombres personnalisée + ( # Soudez tous les rubans de LEDs en respectant la polarité. # Soudez le ruban de LED du bas à l'alimentation. )
Original Prusa i3 MK3S kit assembly + ( *<span style="color:black;"> '''The … * '''The kit includes''' *Needle-nose pliers (1x) * Philips screwdriver (1x) * Allen key (6x) *The printer's package contains a lubricant, which is intended for maintenance. No need to use it now the bearings are lubricated. There is a dedicated online manual on how to clean the printer and apply the lubricant. See [https://help.prusa3d.com/en/guide/printer-maintenance-tips_23200/ help.prusa3d.com/maintenance-tips] No soldering is required. No wire crimping is required. ips_23200/ help.prusa3d.com/maintenance-tips] No soldering is required. No wire crimping is required. )
Word Clock + (Start assembly by making the stencil. You … Start assembly by making the stencil. You can either get a stencil cut by a local sign writer to your own design, or use a pre-cut vinyl stencil from my web site. I have always felt that the clock looks more majestic if there is a border around the letters (I normally use about a 30mm border), but you can use whatever size you would like. Vinyl by itself is floppy, so it needs to be attached to a clear acrylic (Perspex) backing sheet to provide rigidity. Make sure that the acrylic sheet is the size you want the final clock to be.

Before you start, mix up a couple of drops of dish washing liquid with a cup of water, and load that into a spray bottle. We will use this to make applying the vinyl lots easier.

The vinyl stencil as supplied will typically be larger than required. This is so as to provide extra material for variations in face sizes. We need to cut the vinyl stencil to the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.o the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.)
OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
Refreshing Oxalis Kvas + (Step 3: Boil then some water and pour it into the pot with herbs.)
Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
Bentolux -horloge + (<u>'''Structure :'''</u> envo … '''Structure :''' envoyez à découper le fichier .svg (vous pouvez personnaliser votre bento en modifiant le fichier avant découpe) puis montez la bento selon la notice de montage présente dans les fichier joints. '''Electronique :''' suivez le plan de montage du premier arduino, prévoyez que les câbles "gnd "sortant de l'alimentation et "vin" relié à l'intérupteur doivent aussi être brancher sur le deuxième arduino présent au 3^ème étage. '''Arduino :''' le fichier du code arduino 1 est joint.> étage. '''<u>Arduino :</u>''' le fichier du code arduino 1 est joint.)
LÜMBOX + (Suivez le guide PDF pour monter votre gabarit et vous aider a construite votre boite facilement.)
Module aquaponique de recuperation + ( # Suivre le plan d'assemblage ci-joint # … # Suivre le plan d'assemblage ci-joint # Construire en premier le fond, avec une planche coupé en biais dans le sens de la longueur. ## Placer et visser les tasseau sur le tour complet de la pièce 1 ## l'assemblage permet de maintenir les planches entre elles # met de maintenir les planches entre elles # )
ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
Créer une application avec Lora32u4 pour The Things Network + (1 - Télécharger les fichiers [http://bsfra … 1 - Télécharger les fichiers [http://bsfrance.fr/documentation/11355_LORA32U4II/driver_windows.zip Driver windows] et [http://bsfrance.fr/documentation/11355_LORA32U4II/BSFrance.zip Arduino Hardware folder] sur la page [https://bsfrance.fr/lora-long-range/1345-LoRa32u4-II-Lora-LiPo-Atmega32u4-SX1276-HPD13-868MHZ-EU-Antenna.html BSFrance] 2 - Pour les drivers, il suffit de dézipper et de cliquer sur adafruit_drivers.exe. Parmi la liste des drivers proposés, il faut choisir Feather32u4 3 - Bon, là, normalement, il est possible de brancher la carte sur le port USB de l'ordinateur.

Il est possible que vous ayez le message que l'installation du pilote n'a pas été possible. Pas de panique, on y reviendra

3 - Pour les fichiers Arduino, il faut le dézipper dans le répertoire Mes Documents/Arduino/hardware (ce qui est le répertoire par défaut de l'installation de l'environnement Arduino, mais peut-être différent suivant votre installation. si le sous-répertoire hardware n'existe pas, créez le. Cette bibliothèque sert à gérer le microcontrôleur AT Mega32u4 de la carte. 4 - Démarrez l'IDE Arduino. Vous devriez pouvoir trouver la carte dans le menu Outils > Type de carte > LoRa32u4II 868 5 - Dans l'environnement Arduino, à ce stade on sélectionne le port par le menu Outils > Port, mais s'il y a eu l'erreur d'installation de pilote précédemment mentionnée, le port n'apparait pas. Il faut appuyer sur le bouton reset de la carte et sélectionner à nouveau, dans le laps de temps du reset, le menu Outils > Port. Là normalement le port devrait apparaitre quelques instants et on peut le sélectionner. 6 - Il reste encore à installer un bibliothèque : la bibliothèque LMIC qui contient les fichiers pour le protocole LoraWan. Pour cela il y a 2 méthodes : Méthode 1 : * La première est d'aller dans le menu Croquis > Inclure une bibliothèque > Gérer les bibliothèques. * Dans la barre de recherche, du gestionnaire de bibliothèque, tapez "lmic"

Si vous ne voyez rien apparaitre, vérifiez que les listes déroulantes Type et Sujet soient bien sur "Tout"

* Choisissez d'installer le bibliothèque IBM LMIC Framework Méthode 2 : * Téléchargez l'archive du projet GitHub https://github.com/matthijskooijman/arduino-lmic dans le répertoire Mes Documents/Arduino/Libraries. Vous devriez avoir un répertoire arduino-lmic-master 7 - Lorsque cette bibliothèque est bien installée, vous pouvez choisir dans le menu Fichier > Exemples > LMIC-Arduino le sketch ttn-otaa

Pour faire court, la différence entre les sketches ttn-abp et ttn-otaa vient des deux différentes façon de s'enregistrer sur le réseau The Thing Network (par enregistrement, je parle de l'échange qui a lieu entre notre carte et la passerelle TTN lors de la mise sous tension de la carte) La première est l'Activation By Personalization (ou abp) pour laquelle il faut avoir une adresse réseau de la carte appelée DevAddr) La seconde est l'Over-The-Air-Activation (ou otaa). Dans ce mode DevAddr est transmis automatiquement pendant la phase d'enregistrement.

(ou abp) pour laquelle il faut avoir une adresse réseau de la carte appelée DevAddr) La seconde est l'Over-The-Air-Activation (ou otaa). Dans ce mode DevAddr est transmis automatiquement pendant la phase d'enregistrement.</div> </div>)
Buzzing Bee Circuit + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
created file to the printer. PRINT! <br/>)
EMI probe 12+ activities + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
Fablab + Lakehub + (At the group forming stage we decided to b … At the group forming stage we decided to brainstorm on the possible project ideas before splitting. Out of all the ideas around health, the self-testing gadget was decided on. During brainstorming, the challenges in health which we were struggling to get solutions were; teenage pregnancy, More affordable and easily available PPEs for the health providers in the frontline, People Living With Disability, time management in the hospital to enable more patients to be served within the shortest time, real-time billing challengeshortest time, real-time billing challenges)
Showerloop - Guide 1: Overview + (So the main components of the filter are t … So the main components of the filter are the pump, filter housing with the sand and activated carbon filter and the uv-lamp. Large particles like skin cells are trapped by a layer of compressed sand. Finer particles are adsorbed by a layer of compressed activated carbon, including some chemicals like nitrates (in sweat), sulphates (in soap), chlorine and fluorine (in tap water). Finally the UV-lamp is used to sterilize the water so that bacteria can no longer reproduce. It might not seem like a big deal since our bodies are covered in bacteria but the main concern is bacteria from your bum coming into contact with your eyes.ur bum coming into contact with your eyes.)
Showerloop - Guide 1: Overview + (So the main components of the filter are t … So the main components of the filter are the pump, filter housing with the sand and activated carbon filter and the uv-lamp. Large particles like skin cells are trapped by a layer of compressed sand. Finer particles are adsorbed by a layer of compressed activated carbon, including some chemicals like nitrates (in sweat), sulphates (in soap), chlorine and fluorine (in tap water). Finally the UV-lamp is used to sterilize the water so that bacteria can no longer reproduce. It might not seem like a big deal since our bodies are covered in bacteria but the main concern is bacteria from your bum coming into contact with your eyes.ur bum coming into contact with your eyes.)
How To Make A Perfect Study Table/en-gb + (The material of your kid's study table pla … The material of your kid's study table plays a vital role. A strong wood desk lasts for ages, metal ones offer a contemporary feeling while the ones produced using steel offer a feeling of modernity. For a wooden study table, '''[https://www.truworthhomes.com/wood-stain.html Rust-Oleum Truworth Wood Stain]''' gives life span and influences your furniture to look young for years. If you have a necessity of moving your work desk frequently, think about picking something lightweight, durable and which fixed with casters. Desks with easy dismantling feature are also easier to move. mantling feature are also easier to move. )
DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
Marble Machine No 1 Motor Assembly Instructions + (The parts can be glued together in one go … The parts can be glued together in one go and the parts held in place with rubber bands The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
PiKon telescope + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
Ultimate Guide to Fix Tidal Not Playing Songs + (The tidal app for music streaming is now a … The tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
Showerloop - Guide 2: Filters + (There are 2 lids per filter, the top lid a … There are 2 lids per filter, the top lid and bottom lid - duh. A hex nut is used to fasten the hose nipple (facing away from the filter) to the filter lid. The dimensions of hex nuts and/or hose nipples may vary regionally so it's best to get them first,check the measurements and modify the file if needed. In the picture of the lid only a circle was etched/milled into the acrylic lid to fit the hex nut but the design was later revised to have the shape of the hex nut itself, thereby fastening it to the lid so that it could no longer rotate (and prevent fastening) when adding the hose nipple on the outer side of the lid. hose nipple on the outer side of the lid.)
Getting Started with Xiao ESP32 S3 Sense + (This project was successfully completed be … This project was successfully completed because of the help and support from [https://www.nextpcb.com/pcb-assembly-quote NextPCB.] Guys if you have a PCB project, please visit their website and get exciting discounts and coupons. NextPCB offers high-quality, reliable PCB starting at $1.9, and multilayer starting at $6.9. Also, everyone can enjoy free [https://www.nextpcb.com/pcb-assembly-quote PCB assembly] for 5 boards! Also, NextPCB is having a year end sale in which anyone can register through their website and get a $30 Coupon which can be used for ordering PCBs. You can also try HQDFM free online [https://www.nextpcb.com/free-online-gerber-viewer.html PCB Gerber viewer] to check your PCB design and avoid costly errors.k your PCB design and avoid costly errors.)
Nutridome I SDG 11 I South Africa + (This is a PVC pipe that has been drilled w … This is a PVC pipe that has been drilled with holes we were going to use disposable plastic cups but we found some plastic growing cups in the store room and we used those. for this demonstration we are using an ordinary aquarium pump and pipes for the water flow. The bucket is just a normal bucket. The dome was made from 25mm PVC electrical wiring pipes. The dome was inspiration for the idea as we saw it at the Centre and realised its potential. the PVC pipes are held together with cable ties, glue and connectors. The shading is normal garden shade and plastic sheeting can be placed over the structure to create more controlled environments. This will be when you have put the hydroponic system with lighting inside the dome we just wanted to illustrate the look for the final product of the dome.he look for the final product of the dome.)
Is it possible to replace the WR3 module with an ESP-12 module + (This shows the top and bottom side)
Egypt - Shandaweel Village Water Filter - Sanivation Team + (This is the 1st part of the water filter, with a screw locking water filter that attaches to the water funnel)
E-Textile Monster + (This is where you need to decide what shap … This is where you need to decide what shape you want your monster to be and what components it will include. You need to make sure there is room for each of your components and the battery pack as well as decide where you want to squeeze the monster for the components to turn on. TIP: do not make your monster too big making your circuit components too spread out! Otherwise you will spend a long time sewing to connect the components together sewing to connect the components together)
Minion + (ll en tient une couche ce Minion ! Comme un puzzle en 3D, assembler tous les éléments. Pas besoin de les coller. Découper les bouts qui dépassent de l'élément du haut de la tête, numéroté n°1.)
Minion + (ll en tient une couche ce Minion ! Comme un puzzle en 3D, assembler tous les éléments. Pas besoin de les coller. Découper les bouts qui dépassent de l'élément du haut de la tête, numéroté n°1.)
PP Sheetpress + (====Tools==== same as above ====Parts==== … ====Tools==== same as above ====Parts==== 36 corner brackets ====Steps==== # Prepare your parts. Each "cell" will require 4 brackets, 16 M8Bolts, and 16 washers # Starting with the 4 corners of the ''entire assembly'', attach the corner brackets and tighten the bolts only to finger-tight. # Next attach the 920 beam ends to the outer perimeter. # Next, attach the inner beams in place. Ensure that all beams are equally spaced. (remember that the 2 interior beams are shorter though)
interior beams are shorter though) <br/>)
PP Extruder Pro + (==== Tools ==== 1/2" Socket ==== Parts == … ==== Tools ==== 1/2" Socket ==== Parts ==== 2x 1000mm 4080 extrusion 4x 300mm 4040 extrusion 40x t-nuts 22x M8x20 bolts 22x M8 Washers 12x Corner Brackets
==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)uts. (as seen in the right two beams in image 3))
Labyrinthe + (Tout d'abord , lancer une découpe laser avec le fichier SolidWorks ci-joint)
Clay-pot-irrigation system (Aranya Agricultural Alternatives method) + ([[Tree planting (Aranya Agricultural Alternatives method)]])
Clay-pot-irrigation system (Aranya Agricultural Alternatives method) + ([[Tree planting (Aranya Agricultural Alternatives method)]])
Dôme Géodésique Icosahedron V4 + (Une fois les longueurs des montants obtenues il faut à chaque extrémités couper les angles correspondants à chaque type de montants. Une photo montre l'installation des montants pour la découpe des angles.)
Dôme Géodésique Icosahedron V4 + (Une fois les longueurs des montants obtenues il faut à chaque extrémités couper les angles correspondants à chaque type de montants. Une photo montre l'installation des montants pour la découpe des angles.)
Concrete and wood coffee table + (Use a circular saw to cut four balusters into 12” length pieces and another four balusters into 18” length pieces.)
Concrete and wood coffee table + (Use a circular saw to cut four balusters into 12” length pieces and another four balusters into 18” length pieces.)
SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
Glowing LED Butterfly + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
Escooterfix - Replace front LED lamp Xiaomi Mi electric scooter + (Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty.)
Étagère balcon + (Utiliser une huile de lin dilué dans du White spirit pour protéger le bois à l'extérieur. Plus d'info sur: https://www.copaindescopeaux.fr/content_page/item/126-reussir-son-vernis-a-tous-les-coups.html)
Timer : An Arduino based Timer + (Vous avez trois boutons : PLUS (connecté … Vous avez trois boutons : PLUS (connecté à la broche 3 ) doit incrémenter la durée que vous voyez affichée sur l'afficheur LCD. MOINS (connecté à la broche 2 ) fait l'inverse. START (connecté à la broche 4 ) lance le compte à rebours et donc allume l'anneau de leds. Si ca ne marche pas : * Vérifiez votre câblage fil par fil en reprenant tout depuis de début * Vérifiez que votre Arduino est branché * Vérifiez que le code a bien été téléversé dans la carte * Demandez à quelqu'un de vérifiez votre câblage (souvent ça aide) ''Temps indicatif : 2 min''vent ça aide) ''Temps indicatif : 2 min'')
Timer : Un minuteur à base d'Arduino + (Vous avez trois boutons : PLUS (connecté … Vous avez trois boutons : PLUS (connecté à la broche 3 ) doit incrémenter la durée que vous voyez affichée sur l'afficheur LCD. MOINS (connecté à la broche 2 ) fait l'inverse. START (connecté à la broche 4 ) lance le compte à rebours et donc allume l'anneau de leds. Si ca ne marche pas : * Vérifiez votre câblage fil par fil en reprenant tout depuis de début * Vérifiez que votre Arduino est branché * Vérifiez que le code a bien été téléversé dans la carte * Demandez à quelqu'un de vérifiez votre câblage (souvent ça aide) ''Temps indicatif : 2 min''vent ça aide) ''Temps indicatif : 2 min'')
NEXT ENGINE 3D SCANNER :How to use it + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' … * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA''' 5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
Brightness control activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
Thermostat control activity v12 + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
Empty room activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
Light sensitive e-textile bag + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
Light sensitive e-textile bag + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
Getting Started with 3.5 Inch PC State Display + (If you are a PC enthusiast, you might want … If you are a PC enthusiast, you might want to monitor the performance and status of your PC components, such as CPU, GPU, RAM, SSD, HDD, temperature, fan speed, etc. However, opening the task manager or third-party software every time you want to check this information can be inconvenient and distracting. Moreover, you might not be able to see this information when you are gaming or doing other full-screen activities. That’s why a 3.5-inch PC state display can be a great addition to your PC setup. A 3.5-inch PC state display is a small screen that can be mounted on your PC case and display various information about your PC state. It can show you the CPU model, usage, frequency, temperature, fan speed, GPU model, usage, frequency, temperature, fan speed, RAM usage, SSD/HDD usage, network speed, IP address, weather forecast, and custom information. You can also choose from different themes and orientations to suit your preferences. A 3.5-inch PC state display can help you monitor your PC state at a glance, without interrupting your workflow or gaming experience. It can also enhance the aesthetics and functionality of your PC case, making it more personalized and attractive. Whether you are a gamer, a streamer, a content creator, or a professional, a 3.5-inch PC state display can be a useful and fun tool for your PC. In this article, I will show you how to get started with a 3.5-inch PC state display, how to install it, how to customize it, and how to use it. Let’s begin!tomize it, and how to use it. Let’s begin!)
Cardboard Cable Car Model With Recycled Materials, Working Model 250rpm Electric Motor and Basic Slide Switch ON-OFF-ON (School Science Project) + (You can check all steps on video briefly or follow below steps. • Mount plastic pulley wheel onto DC motor shaft and glue on it.)
SunZilla - Guide 5: Assembling solar panels frames + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
M5Stick C Captive Portal + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Water Quality Monitoring System Based on IOT + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Ethernet-Enhanced LoRa Gateway Minimizing Delay + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
Testing NB-IoT connectivity in India with NRF9160 and Airtel + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
AWS IoT Core IoT Platform Series - 6 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Line Follower Robot - King of Maze + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Node Red Controlled Neo Pixel on Raspberry Pi 4 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Node Red with Raspberry Pi + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
Simple Train Blocking System + (You'll need to cut the rails or isolate th … You'll need to cut the rails or isolate them to make sure each block is independent. The last track is the security track and is isolated from the rest. The sticker on the plaque is right on the security track. What you see before is the main track (stop zone) and what you see after is the stop zone of the next block. after is the stop zone of the next block.)
Open Workshop Setup/de + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
OpenKnit: digital fabrication tool to create your own clothes + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
Tree planting (Aranya Agricultural Alternatives method) + ( #If you use a bottle-irrigation system: # … #If you use a bottle-irrigation system: ##Loosen the cap to open the bottle-irrigation system, ##As you add water in the bottle, measure the amount of water added in the bottle-irrigation system: ###If the bottle was empty, increase the frequency of your examinations, ###If the bottle was not empty, reduce the frequency of your examinations; ##Tighten the cap to close the bottle-irrigation system; #If you use a clay-pot-irrigation system: ##Remove the clay plate from the clay pot to open the clay-pot-irrigation system, ##As you add water in the clay pot, measure the amount of water added in the clay-pot-irrigation system: ###If the clay pot was empty, increase the frequency of your examinations, ###If the clay pot was not empty, reduce the frequency of your examinations; ##Install the clay plate on the clay pot to close the clay-pot-irrigation system: #Else: ##If the moisture level is low, add water and increase the frequency of your examinations, ##If the moisture level is high, reduce the frequency of your examinations. reduce the frequency of your examinations. )
Analogic Drawing Pad + (You will need to draw 10 pulleys in total. … You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
Analogic Drawing Pad + (You will need to draw 10 pulleys in total. … You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
Build a Dog Wheelchair with PVC Pipes + (You will require a 6.2-inch long ¾” tube, … You will require a 6.2-inch long ¾” tube, a ¾” adapter, and a 10-inch wheel with a tee made of black steel. We will begin by constructing the wheelbase, creating two identical units. Follow the same procedure for both wheels, referring to the diagram above for the required parts (x2). Insert the 6.2-inch long ¾” tube into the ¾” adapter. Then, place the assembled adapter into the 10-inch wheel with tee, as shown in the diagram. Once completed, set them aside until you are ready to attach them to the frame later on.eady to attach them to the frame later on.)
Murmur numéro 2 + (À l’aide d’une règle ou d’un mètre, mesurez 17, 5 cm dans le tasseau. Fixer la baguette de bois à l’aide d’un serre-joint sur un support stable, puis scier-la à la main en suivant le trait de coupe pour obtenir une pièce à la bonne longueur.)

Concrete and wood coffee table + (I used 1 screw in each side of each baluster. Even though each joint by itself isn't strong the resulting framework is quite sturdy. To keep the balusters from splitting drill pilot holes before screwing.)
Concrete and wood coffee table + (I used 1 screw in each side of each baluster. Even though each joint by itself isn't strong the resulting framework is quite sturdy. To keep the balusters from splitting drill pilot holes before screwing.)

AD0-E600 + (<nowiki><h2>Welcome to the HTM …
Welcome to the HTML editor!

Just type the HTML and it will be shown below.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed elementum neque id magna. Mauris sollicitudin nisi sit amet sem. Etiam sit amet lectus a velit interdum facilisis. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; In tincidunt eleifend neque. Maecenas interdum, neque in fringilla pellentesque, lacus massa eleifend elit, nec scelerisque nulla orci a nunc. Quisque sollicitudin. Sed pulvinar lacus id lacus. Vestibulum imperdiet tellus eget risus. Quisque libero nisl, feugiat eu, euismod at, elementum eget, tellus. Clesto.com

Heading in h2, som more sample text

Phasellus sem odio, varius quis, cursus at, ullamcorper eget, turpis. Maecenas a mi. Mauris dignissim lectus malesuada odio. Duis elit arcu, lobortis ut, porta ac, venenatis ornare, odio. Pellentesque scelerisque. Ut elementum laoreet massa. Suspendisse hendrerit odio eget turpis. Cras tellus dui, malesuada id, adipiscing ut, laoreet sed, magna. Phasellus scelerisque aliquet ligula. Quisque vitae elit sit amet enim suscipit interdum. Curabitur laoreet, mauris sit amet aliquet interdum, pede sapien malesuada metus, in tincidunt turpis justo id arcu. Donec gravida odio ac lectus. Nam rutrum ante in nisi laoreet aliquet. Sed at ante.

Heading in h3, som more sample text

Nulla facilisi. Nullam cursus scelerisque erat. Praesent convallis rhoncus dui. In hac habitasse platea dictumst. Nullam pellentesque. Mauris ac orci. Donec dictum. Etiam purus tortor, elementum a, posuere nec, pulvinar id, ipsum. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque vel justo. Nullam posuere purus sed arcu.

Nulla facilisi.

Pellentesque habitant morbi

Quisque vel justo.

Nullam posuere purus sed arcu.

;<br /><br /><ul><br /><br /><li>Nulla facilisi.</li><br /><br /><li>Pellentesque habitant morbi</li><br /><br /><li>Quisque vel justo.</li><br /><br /><li>Nullam posuere purus sed arcu.</li><br /><br /></ul></nowiki>)
EPM-DEF + (<nowiki><h2>Welcome to the HTM …
Welcome to the HTML editor!

Just type the HTML and it will be shown below.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed elementum neque id magna. Mauris sollicitudin nisi sit amet sem. Etiam sit amet lectus a velit interdum facilisis. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; In tincidunt eleifend neque. Maecenas interdum, neque in fringilla pellentesque, lacus massa eleifend elit, nec scelerisque nulla orci a nunc. Quisque sollicitudin. Sed pulvinar lacus id lacus. Vestibulum imperdiet tellus eget risus. Quisque libero nisl, feugiat eu, euismod at, elementum eget, tellus. Clesto.com

Heading in h2, som more sample text

Phasellus sem odio, varius quis, cursus at, ullamcorper eget, turpis. Maecenas a mi. Mauris dignissim lectus malesuada odio. Duis elit arcu, lobortis ut, porta ac, venenatis ornare, odio. Pellentesque scelerisque. Ut elementum laoreet massa. Suspendisse hendrerit odio eget turpis. Cras tellus dui, malesuada id, adipiscing ut, laoreet sed, magna. Phasellus scelerisque aliquet ligula. Quisque vitae elit sit amet enim suscipit interdum. Curabitur laoreet, mauris sit amet aliquet interdum, pede sapien malesuada metus, in tincidunt turpis justo id arcu. Donec gravida odio ac lectus. Nam rutrum ante in nisi laoreet aliquet. Sed at ante.

Heading in h3, som more sample text

Nulla facilisi. Nullam cursus scelerisque erat. Praesent convallis rhoncus dui. In hac habitasse platea dictumst. Nullam pellentesque. Mauris ac orci. Donec dictum. Etiam purus tortor, elementum a, posuere nec, pulvinar id, ipsum. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque vel justo. Nullam posuere purus sed arcu.

Nulla facilisi.

Pellentesque habitant morbi

Quisque vel justo.

Nullam posuere purus sed arcu.

;<br /><br /><ul><br /><br /><li>Nulla facilisi.</li><br /><br /><li>Pellentesque habitant morbi</li><br /><br /><li>Quisque vel justo.</li><br /><br /><li>Nullam posuere purus sed arcu.</li><br /><br /></ul></nowiki>)
ANS-C01 + (<nowiki><h2>Welcome to the HTM …
Welcome to the HTML editor!

Just type the HTML and it will be shown below.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed elementum neque id magna. Mauris sollicitudin nisi sit amet sem. Etiam sit amet lectus a velit interdum facilisis. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; In tincidunt eleifend neque. Maecenas interdum, neque in fringilla pellentesque, lacus massa eleifend elit, nec scelerisque nulla orci a nunc. Quisque sollicitudin. Sed pulvinar lacus id lacus. Vestibulum imperdiet tellus eget risus. Quisque libero nisl, feugiat eu, euismod at, elementum eget, tellus. Clesto.com

Heading in h2, som more sample text

Phasellus sem odio, varius quis, cursus at, ullamcorper eget, turpis. Maecenas a mi. Mauris dignissim lectus malesuada odio. Duis elit arcu, lobortis ut, porta ac, venenatis ornare, odio. Pellentesque scelerisque. Ut elementum laoreet massa. Suspendisse hendrerit odio eget turpis. Cras tellus dui, malesuada id, adipiscing ut, laoreet sed, magna. Phasellus scelerisque aliquet ligula. Quisque vitae elit sit amet enim suscipit interdum. Curabitur laoreet, mauris sit amet aliquet interdum, pede sapien malesuada metus, in tincidunt turpis justo id arcu. Donec gravida odio ac lectus. Nam rutrum ante in nisi laoreet aliquet. Sed at ante.

Heading in h3, som more sample text

Nulla facilisi. Nullam cursus scelerisque erat. Praesent convallis rhoncus dui. In hac habitasse platea dictumst. Nullam pellentesque. Mauris ac orci. Donec dictum. Etiam purus tortor, elementum a, posuere nec, pulvinar id, ipsum. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque vel justo. Nullam posuere purus sed arcu.

Nulla facilisi.

Pellentesque habitant morbi

Quisque vel justo.

Nullam posuere purus sed arcu.

;<br /><br /><ul><br /><br /><li>Nulla facilisi.</li><br /><br /><li>Pellentesque habitant morbi</li><br /><br /><li>Quisque vel justo.</li><br /><br /><li>Nullam posuere purus sed arcu.</li><br /><br /></ul></nowiki>)
Wicker Glider Loveseat Outdoor: A Perfect Blend of Comfort and Style + (A [https://belord-home.com/product/outdoor … A [https://belord-home.com/product/outdoor-patio-glider-loveseat wicker glider loveseat] is a timeless addition to any outdoor space, combining comfort, functionality, and aesthetic appeal. Ideal for gardens, patios, or porches, these pieces offer a soothing gliding motion that enhances relaxation while maintaining the charm of traditional outdoor furniture. Here’s a comprehensive guide to wicker glider loveseats, what to look for when purchasing, and how to maintain them for lasting use. === 1. Benefits of a Wicker Glider Loveseat === Wicker glider loveseats come with a variety of advantages that make them a popular choice for outdoor seating: * '''Smooth Gliding Motion''': The gentle back-and-forth movement creates a calming effect, perfect for unwinding after a long day or enjoying a quiet afternoon outdoors. * '''Aesthetic Appeal''': The intricate weave of wicker adds a touch of elegance to any setting, whether you prefer a rustic, coastal, or modern design. * '''Versatile Placement''': These loveseats fit seamlessly into different outdoor areas, from shaded garden nooks to sunny patios or screened porches. * '''Space for Two''': The loveseat design allows for shared seating, making it ideal for couples or families. === 2. Types of Wicker Used === Understanding the type of wicker used in your glider loveseat is crucial for assessing its durability and maintenance needs: * '''Natural Wicker''': Made from materials like rattan, bamboo, or willow, natural wicker offers a classic look but requires more maintenance to withstand outdoor elements. It is best suited for covered patios or indoor use. * '''Synthetic Resin Wicker''': A more popular choice for outdoor furniture, synthetic wicker (often made from high-density polyethylene) is designed to resist weather damage, including sun, rain, and humidity. It retains its color and structure longer than natural wicker and requires less upkeep. === 3. Choosing the Best Wicker Glider Loveseat === When selecting a wicker glider loveseat, consider these essential factors: * '''Frame Material''': Ensure the frame is made from sturdy, rust-resistant materials like powder-coated aluminum or stainless steel. This will provide a stable foundation and prevent corrosion over time. * '''Cushion Quality''': High-quality, weather-resistant cushions are a must for comfort and durability. Look for cushions made from outdoor fabric such as Sunbrella, which resists fading, moisture, and mildew. * '''Weave Tightness''': Check the weave of the wicker to ensure it is tight and secure. A well-crafted weave will be more durable and less prone to unraveling. * '''Weight and Stability''': A heavier glider loveseat is less likely to tip or move unexpectedly, making it a safer option, especially in windy areas. === 4. Placement Tips === Where you place your wicker glider loveseat can impact both its longevity and your enjoyment: * '''Shaded Areas''': Placing the loveseat in a shaded or partially shaded area can prevent direct sun exposure, reducing the risk of fading and heat damage. * '''Covered Patios and Porches''': These locations offer protection from rain and sun, helping preserve the wicker and cushions. * '''Garden Corners''': Positioning the glider in a quiet garden corner creates a serene spot for relaxation, surrounded by nature. * '''Poolside Retreats''': A wicker glider loveseat can add a cozy seating area near a pool, providing a place to lounge and unwind after a swim. === 5. Maintenance Tips === Proper care can significantly extend the life of your wicker glider loveseat: * '''Regular Cleaning''': Wipe down the wicker with a damp cloth and mild detergent to remove dust, dirt, and pollen. For more thorough cleaning, use a soft brush to reach crevices. * '''Protect Against Moisture''': While synthetic wicker is weather-resistant, covering your glider during heavy rain or storing it indoors during winter can help maintain its condition. * '''Cushion Care''': Clean and store cushions when not in use to prevent fading and mildew. Use cushion covers for added protection. * '''Inspect for Wear''': Periodically check for loose or broken wicker strands and address any damage promptly to prevent further unraveling. === 6. Popular Styles and Design Features === Wicker glider loveseats come in various styles to suit different aesthetic preferences: * '''Classic Coastal''': Light-colored wicker paired with blue or white cushions evokes a breezy, beach-inspired look. * '''Modern Minimalist''': Sleek, dark wicker with neutral or monochrome cushions complements a contemporary outdoor space. * '''Rustic Charm''': Natural-looking wicker combined with earthy tones and textured fabrics adds warmth and character. Many models also come with added features like built-in side tables or storage compartments, enhancing the loveseat’s functionality. === 7. Budget Considerations === Prices for wicker glider loveseats can vary widely depending on materials, craftsmanship, and brand. Synthetic resin wicker loveseats with high-quality frames and cushions are often more affordable than natural wicker but still offer excellent durability. * '''Budget-Friendly Options''': Basic models with simple designs and standard cushions. * '''Mid-Range''': Loveseats with enhanced weather resistance, better cushion materials, and added design elements. * '''Premium''': High-end options with luxury outdoor fabrics, intricate weaving, and added features like gliding mechanisms with smoother bearings. === Conclusion === A wicker glider loveseat is an excellent investment for anyone looking to enhance their outdoor living space with comfort and style. By choosing weather-resistant materials, ensuring proper placement, and following maintenance tips, you can enjoy your glider loveseat for many seasons. Whether placed on a cozy porch or nestled in a garden, it’s a piece that brings relaxation and charm to any outdoor area. relaxation and charm to any outdoor area.)
Choose business + (Keeping your dog’s teeth clean and healthy … Keeping your dog’s teeth clean and healthy is essential for their overall well-being. While regular brushing is the most effective way to maintain oral hygiene, dental bones offer a convenient and enjoyable alternative. This article will explore what [https://peidigroup.com/collection/chewnergy healthy dog dental chews] are, their benefits, how to choose the right dental bone, and tips for safe usage. === 1. '''What Are Dental Bones for Dogs?''' === Dental bones are specially designed chews that help clean a dog’s teeth and freshen their breath while satisfying their natural urge to chew. Made from various materials and infused with flavors, these bones are formulated to promote dental health through mechanical action as the dog chews. They come in different shapes, sizes, and formulations to cater to various dog breeds and chewing habits. === 2. '''Benefits of Dental Bones''' === Dental bones offer multiple benefits beyond just being a tasty treat for your pet: ==== '''1. Reduces Plaque and Tartar Build-Up''' ==== The chewing action helps scrape away plaque and tartar from your dog’s teeth, reducing the risk of dental disease and related issues such as bad breath and gum inflammation. ==== '''2. Promotes Fresh Breath''' ==== Many dental bones are made with ingredients that help neutralize odor-causing bacteria in your dog’s mouth, leading to fresher breath. ==== '''3. Supports Healthy Gums''' ==== Chewing on dental bones stimulates the gums and can improve blood circulation, which helps maintain gum health. ==== '''4. Provides Mental Stimulation''' ==== Chewing is a natural behavior for dogs and helps keep them mentally stimulated. Dental bones provide an outlet for this instinct, reducing boredom and destructive chewing behavior. === 3. '''Types of Dental Bones for Dogs''' === There are several types of dental bones available, each with its own unique features: ==== '''1. Natural Dental Chews''' ==== These are made from natural ingredients and often contain no artificial additives. They can be formulated with flavors like chicken or beef to entice your dog while promoting dental health. ==== '''2. Edible Dental Bones''' ==== These dental chews are designed to be consumed and are typically made from digestible ingredients that break down easily in a dog’s stomach. ==== '''3. Non-Edible Dental Chews''' ==== These chews are durable and intended for long-lasting use. They are often made from nylon or rubber and infused with flavors. While they provide the benefit of consistent chewing, they should only be given under supervision to prevent potential hazards if pieces break off. === 4. '''Choosing the Right Dental Bone for Your Dog''' === Selecting the appropriate dental bone for your pet depends on several factors: ==== '''1. Size and Chewing Strength''' ==== Ensure that the dental bone is the right size for your dog. Larger dogs need bigger, more durable chews, while smaller dogs require appropriately sized bones. Dogs with strong chewing habits might need tougher dental bones to prevent rapid consumption or breakage. ==== '''2. Ingredients''' ==== Check the ingredient list for any potential allergens or artificial additives. Natural ingredients are always preferable, especially if your dog has a sensitive stomach. ==== '''3. Texture and Hardness''' ==== The texture should be firm enough to clean the teeth effectively but not so hard that it risks damaging the dog’s teeth. Softer dental chews are suitable for older dogs or those with dental issues. ==== '''4. Veterinary Recommendations''' ==== Consult with your veterinarian to ensure the dental bone you choose is suitable for your dog’s age, size, and health needs. === 5. '''Safety Tips for Giving Dental Bones to Your Dog''' === While dental bones are beneficial, it’s essential to use them safely: * '''Supervise Chewing''': Always monitor your dog when they are chewing a dental bone to prevent choking or accidental ingestion of large pieces. * '''Appropriate Size''': Choose a dental bone that is large enough that your dog cannot swallow it whole. * '''Limit Chewing Time''': Set a time limit for chewing sessions to avoid excessive wear on your dog’s teeth. * '''Replace When Needed''': Discard dental chews that become small enough to be a choking hazard or if they show signs of significant wear. === 6. '''Homemade Dental Bone Recipe''' === For those who prefer a DIY approach, here’s a simple recipe for homemade dental chews: '''Ingredients''': * 1 cup of pumpkin puree (unsweetened) * 1 egg * 3 tablespoons of coconut oil * 2 1/2 cups of whole wheat flour * 1/2 cup of mint leaves (optional for fresh breath) '''Instructions''': # '''Preheat the Oven''': Set the oven to 350°F (175°C). # '''Mix Ingredients''': Combine the pumpkin puree, egg, and coconut oil in a bowl. # '''Add Flour and Mint''': Gradually mix in the flour and mint leaves to form a dough. # '''Shape the Chews''': Roll out the dough and cut it into bone shapes. # '''Bake''': Place the chews on a baking sheet and bake for 25-30 minutes or until firm. # '''Cool Before Serving''': Let the chews cool completely before giving them to your dog. === 7. '''Conclusion''' === Dental bones for dogs are an effective way to maintain oral hygiene while providing a satisfying and stimulating activity. Whether store-bought or homemade, the right dental bone can support dental health, reduce tartar and plaque, and keep your dog’s breath fresh. Always consider your dog’s specific needs and consult with a veterinarian to choose the best dental chews for their health and safety. dental chews for their health and safety.)
Outdoor Coffee Tables with Glass Tops: A Perfect Blend of Function and Elegance + (Outdoor spaces are an extension of your ho … Outdoor spaces are an extension of your home, offering a place to relax, entertain, and enjoy the beauty of nature. One way to elevate your patio or deck is by adding an outdoor coffee table with a glass top. Combining functionality and style, glass-top coffee tables are both practical and visually appealing. This article will guide you through the benefits, styles, and maintenance tips for outdoor glass-top coffee tables. 1. Why Choose an Outdoor Coffee Table with a Glass Top? Glass-top coffee tables have become a popular choice for outdoor living areas due to their many advantages: 1. Sleek and Modern Appearance An [https://belord-home.com/product/5-piece-rattan-furniture-outdoor-swivel-chairs outdoor rattan swivel chair] adds a touch of elegance and sophistication to your outdoor space. The transparent surface creates a light and airy look that complements any decor style, from modern minimalist to classic and rustic. 2. Easy to Clean One of the standout features of a glass-top coffee table is its ease of maintenance. Unlike porous surfaces that can stain or trap dirt, glass can be wiped clean with a cloth and a mild cleaning solution, making it perfect for outdoor use where spills and debris are common. 3. Enhances Space Perception Glass surfaces create the illusion of more space, which is particularly beneficial for smaller patios or balconies. The see-through top allows you to maintain an open and uncluttered look, making your outdoor area feel more expansive. 4. Durability with the Right Construction When paired with a weather-resistant frame—such as powder-coated metal, treated wood, or resin wicker—glass-top tables can withstand the elements and last for years. Opting for tempered glass further enhances the durability and safety of your table, as it is designed to resist shattering. 2. Key Features to Consider When Choosing a Glass-Top Outdoor Coffee Table To make the most of your investment, consider the following features: 1. Tempered Glass Ensure that the table has a tempered glass top, which is stronger and safer than regular glass. If it does break, tempered glass shatters into small, rounded pieces instead of sharp shards, reducing the risk of injury. 2. UV Protection Tables with UV-resistant glass prevent discoloration and weakening due to prolonged sun exposure. This feature helps maintain the table’s aesthetic and structural integrity over time. 3. Sturdy Frame Material Choose a table with a frame made of weather-resistant materials such as: Aluminum: Lightweight, rust-proof, and easy to move. Wrought Iron: Heavier and more durable, ideal for areas with strong winds. Resin Wicker: Offers a natural look and is resistant to moisture and fading. 4. Non-Slip Features A non-slip surface or rubber pads to keep the glass top securely in place is essential for safety, especially in areas prone to wind or high traffic. 3. Popular Styles of Glass-Top Outdoor Coffee Tables Outdoor coffee tables with glass tops come in a variety of designs to suit different tastes and functional needs: 1. Modern Minimalist Characterized by clean lines and simple frames, these tables blend seamlessly with contemporary outdoor furniture. Often featuring metal or aluminum bases, they create a sleek, uncluttered look. 2. Rustic Charm For a more laid-back and cozy vibe, consider a table with a wicker or wooden frame paired with a glass top. This style complements outdoor spaces that incorporate natural elements like plants and wooden seating. 3. Multi-Functional Designs Tables with additional features such as lower shelves, built-in storage, or nesting capabilities are perfect for those looking to maximize functionality. These options help keep outdoor essentials organized while providing ample surface space for entertaining. 4. Benefits of Glass-Top Tables for Outdoor Entertaining Glass-top coffee tables are ideal for hosting friends and family in outdoor spaces. Here’s why they work so well for entertaining: Ease of Decoration: The transparent surface allows you to display decorative items like vases, candles, or centerpieces without obstructing the view. Reflective Quality: Glass reflects light, creating an inviting and vibrant atmosphere during the day and enhancing the glow of lights at night. Stable Surface: The smooth and solid surface ensures that drinks and plates sit evenly, reducing the risk of spills. 5. Maintaining Your Outdoor Glass-Top Coffee Table To keep your glass-top coffee table looking its best and prolong its lifespan, follow these simple maintenance tips: 1. Regular Cleaning Wipe down the glass regularly using a soft cloth and a gentle cleaner to remove dust, pollen, and smudges. Avoid abrasive materials that could scratch the surface. 2. Protect from Harsh Weather If possible, place your table under a patio cover or use a waterproof cover during inclement weather. This will help prevent water spots and protect the frame from moisture damage. 3. Avoid Direct Sunlight Prolonged exposure to direct sunlight can cause fading and wear on both the glass and the frame. Arrange your table in a shaded area or use an outdoor umbrella for additional protection. 4. Check for Stability Periodically check that the glass top is secure and the frame remains sturdy. Tighten any loose screws or fasteners to maintain the table’s structural integrity. 6. Conclusion An [https://belord-home.com/product/outdoor-coffee-table-with-tempered-glass-top outdoor coffee table glass top] with a glass top can transform your patio or garden into a stylish and functional living space. By considering factors such as material, durability, and design, you can choose a table that complements your outdoor decor and stands up to the elements. With proper care and thoughtful placement, a glass-top table will become a cherished centerpiece for relaxation and entertaining for years to come.xation and entertaining for years to come.)
How to make party poppers + (Party poppers are a delightful way to add … Party poppers are a delightful way to add an extra burst of fun to any occasion. Whether it's a birthday, wedding, or New Year's Eve celebration, these colorful and confetti-filled surprises can make your event even more memorable. Making your own party poppers is not only easy but also allows you to customize them to fit the theme of your celebration. In this guide, we'll walk you through the supplies needed, the step-by-step process, and some creative ideas on how to use them. == Supplies Needed for DIY Party Poppers == Before you begin crafting your party poppers, gather the following supplies: * '''1 empty paper towel tube or tissue paper roll:''' This will serve as the main body of the popper. * '''Glitter, confetti, and small party favors:''' Fill your poppers with glitter, fortunes, horoscopes, confetti, mints, funny notes, chocolate coins, or small party favors. * '''12-by-12-inch piece of wrapping or tissue paper:''' Choose a paper that matches your event's theme or color scheme. * '''Scissors:''' To cut the cardboard tube and wrapping paper. * '''Glue gun or tape:''' Secure the wrapping paper around the tubes. * '''Ribbon:''' Add a decorative touch and help secure the ends of the popper. == Step-by-Step Directions for Making Party Poppers == === 1. Prepare the Cardboard Tubes === Begin by cutting the cardboard tube in half. Next, cut one of the halves in half again, leaving you with three smaller tubes of different sizes. These will form the body of your party poppers. === 2. Fill the Tubes === Now that you have your tubes ready, it's time to fill them. Add glitter, confetti, and any small party favors you’ve selected. The contents will create the "pop" when the popper is used, so be sure to pack them well but not too tightly. === 3. Wrap the Tubes === Lay your 12-by-12-inch piece of wrapping paper face down on a flat surface. Arrange the three filled tubes in an even row at the edge of the paper, leaving about a 1/2-inch space between each tube. Carefully glue or tape the edge of the wrapping paper along the length of the tubes to secure them in place. Roll the paper over the tubes until they are fully wrapped, then trim any excess paper, including from the ends of the tubes. === 4. Add Finishing Touches === Gently twist the wrapping paper at the spaces between the tubes to create the classic party popper shape. Secure each twisted section with a piece of ribbon for a festive look. The ribbon not only adds flair but also helps hold the popper together. === 5. Display and Use Your Party Poppers === Your party poppers are now ready! You can add them to your table settings, place a bunch in a large glass bowl as a centerpiece, or hand them out to guests right before the big moment. == Tips and Variations for Creative Party Poppers == * '''Easy Breakage:''' Before giving the poppers to your guests, use a pin to poke holes around the edges of the tube. This will make it easier for the popper to break open when pulled. * '''Size Variations:''' For smaller poppers, use cardboard tubes from wrapping paper rolls instead of paper towel tubes. * '''Personalization:''' Create a personalized look by wrapping the tubes with color copies of family photos or images that match the theme of your event. == Where and How to Use Party Poppers == Party poppers are versatile and can be used in various types of celebrations. Here are some ideas for where and how to use them: === 1. '''Birthday Parties''' === Party poppers can be used when the birthday person makes a wish and blows out the candles. Alternatively, they can be given out as party favors to guests as a fun takeaway. === 2. '''Weddings''' === Instead of the traditional rice or confetti, guests can pop party poppers during the newlyweds’ send-off, creating a spectacular photo opportunity. === 3. '''New Year's Eve''' === Distribute party poppers to guests before midnight. When the clock strikes twelve, everyone can pop them to celebrate the arrival of the new year. === 4. '''Gender Reveal Parties''' === Fill the poppers with pink or blue confetti for a fun and interactive way to reveal the baby's gender to family and friends. === 5. '''Graduation Parties''' === Celebrate the graduate's achievement by popping the poppers during the ceremony or at the party. It’s a great way to mark the big moment with a burst of excitement. === 6. '''Holiday Gatherings''' === Whether it’s Christmas, Halloween, or the Fourth of July, you can customize the poppers with thematic colors and confetti to add a festive touch to your holiday celebrations. === 7. '''Engagement Parties or Proposals''' === Celebrate love with a unique twist by filling the poppers with rose petals or themed confetti. It’s a memorable way to enhance the moment. === 8. '''Retirement Celebrations''' === Mark the transition from work to retirement with the joyous noise and visual delight of party poppers. === 9. '''Anniversary Parties''' === Party poppers are perfect for any anniversary celebration, adding a joyful burst of color and fun to the occasion. === 10. '''Welcome Home Parties''' === Celebrate a loved one’s return with the cheerful explosion of party poppers, making their homecoming even more special. == Conclusion == Making your own party poppers is a fun, easy, and creative way to add an extra layer of excitement to any event. Whether you’re celebrating a birthday, wedding, or holiday, these DIY poppers can be customized to fit any theme and are sure to be a hit with your guests. So gather your supplies, follow the steps, and get ready to pop your way to a fantastic celebration! [https://www.designsforcricut.com/product/Elegant-Cricut-Catio-Designs-Custom-Monogram-for-Cat-Lovers Cricut catio designs] , [https://www.designsforcricut.com/category/monograms/3dfont Cricut 3d fonts for logos]onograms/3dfont Cricut 3d fonts for logos])
Commercial Door Rollers: Essential Components for Smooth and Efficient Operation + ([https://kaiyinghardware.com/collection/ro … [https://kaiyinghardware.com/collection/rollers Sliding door rollers] are critical for the smooth and reliable functioning of various types of doors, including sliding, overhead, and industrial doors. They play a vital role in ensuring that doors can be opened and closed with ease, even in high-traffic environments. This article will discuss what commercial door rollers are, their types, benefits, and key factors to consider when choosing the right rollers for your business. 1. What Are Commercial Door Rollers? Commercial door rollers are wheel-like components attached to the top or bottom of doors that facilitate movement along a track. These rollers are designed to bear significant weight and ensure the door operates smoothly. They are commonly found in commercial and industrial settings, such as warehouses, retail stores, factories, and office buildings. 2. Types of Commercial Door Rollers There are several types of commercial door rollers to accommodate different door designs and operational needs: 1. Sliding Door Rollers Sliding door rollers are used in doors that move horizontally along a track. These are popular in retail storefronts, office partitions, and warehouse entries due to their space-saving design. 2. Overhead Door Rollers Overhead rollers are crucial for garage doors and industrial overhead doors. These rollers move vertically along tracks and must be sturdy enough to support the weight of the door as it lifts and lowers. 3. Heavy-Duty Rollers For larger, heavier doors found in industrial settings, heavy-duty rollers are essential. They are made from robust materials such as hardened steel or nylon to withstand frequent use and substantial weight. 4. Ball Bearing Rollers Rollers equipped with ball bearings offer smoother, quieter operation and reduced friction, making them ideal for areas where minimal noise is preferred. 3. Key Features of High-Quality Commercial Door Rollers When selecting commercial door rollers, it’s important to look for features that ensure long-lasting performance and efficiency: 1. Material Composition The material of the roller can significantly impact its durability and performance: Steel Rollers: Known for their strength and longevity, steel rollers are ideal for heavy-duty doors. Nylon Rollers: Quieter and smoother than steel rollers, nylon rollers are perfect for medium-duty applications and environments where noise reduction is essential. 2. Ball Bearings High-quality rollers often feature ball bearings, which help minimize friction and allow for smooth operation. Ball bearing rollers are recommended for doors that require frequent use, as they enhance longevity and reduce wear. 3. Weight Capacity Ensure the rollers you choose can support the weight of the door. Rollers with a higher weight capacity are necessary for larger and heavier doors to prevent damage and ensure smooth movement. 4. Corrosion Resistance For outdoor or high-humidity environments, choose rollers made from corrosion-resistant materials such as stainless steel or galvanized steel to prevent rust and extend their lifespan. 4. Benefits of Using High-Quality Commercial Door Rollers 1. Enhanced Door Performance High-quality rollers contribute to the seamless and efficient movement of commercial doors. This is particularly important in busy settings where doors are opened and closed frequently. 2. Increased Durability Investing in premium door rollers reduces the need for frequent replacements and repairs. Durable rollers are built to withstand the stresses of constant use, saving businesses time and money. 3. Improved Safety Reliable door rollers reduce the risk of door malfunctions that could lead to accidents or injuries. Ensuring your doors operate smoothly and consistently helps maintain a safe environment for employees and customers. 4. Noise Reduction Nylon or ball bearing rollers provide quieter operation compared to basic metal rollers. This is an advantage in office settings or areas where a low-noise environment is desired. 5. Factors to Consider When Choosing Commercial Door Rollers Selecting the right door rollers involves evaluating several factors to match the specific needs of your business: 1. Door Type and Usage Consider the type of door (e.g., sliding, overhead, industrial) and how frequently it will be used. High-traffic areas or heavy doors may require more robust rollers with ball bearings for optimal performance. 2. Environmental Conditions For doors exposed to outdoor elements or corrosive environments, opt for rollers made from weather-resistant materials. This ensures longevity and consistent performance even in harsh conditions. 3. Maintenance Requirements Some rollers require more maintenance than others. Rollers with sealed ball bearings are generally low-maintenance and ideal for high-traffic areas, as they do not need frequent lubrication. 4. Compatibility Ensure that the rollers you select are compatible with the existing door track and overall system. Mismatched components can lead to operational issues and increased wear. 6. Maintenance Tips for Commercial Door Rollers To maximize the lifespan and efficiency of your door rollers, follow these maintenance tips: Regular Inspections: Check the rollers and tracks periodically for signs of wear, dirt, or debris that could impede smooth operation. Lubrication: Apply lubricant to rollers and tracks as needed to ensure smooth movement and reduce friction. Clean the Tracks: Keep the door tracks clean to prevent buildup that can affect the rollers’ function. Replace Worn Rollers: If a roller shows signs of excessive wear or damage, replace it promptly to avoid further damage to the door system. 7. Conclusion [https://kaiyinghardware.com/collection/leverset-lock Commercial Leverset Lock] is essential components that contribute to the smooth, safe, and efficient operation of doors in various settings. By choosing high-quality rollers that meet the specific needs of your business and maintaining them properly, you can ensure optimal door performance and durability. Whether you need rollers for a sliding, overhead, or heavy-duty door, understanding the key features and considerations will help you make an informed decision that enhances your facility’s functionality and safety. your facility’s functionality and safety.)
Un tour de plus + ('''Couper deux panneaux bois''' (ex. : L. 120 cm x H. 60 cm).)
Maker' pot + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
Maker' pot + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
Mtb-ebike + (== Why the Right E-MTB Matters == [https:/ … == Why the Right E-MTB Matters == [https://lacrosebike.com/products/thunder Mountain electric bicycles]—commonly called '''e-MTBs'''—are transforming how people ride off-road. By combining the thrill of traditional mountain biking with the convenience of electric assistance, these bikes allow riders to explore tougher trails, climb higher, and ride longer. But with so many models available, how do you choose the best mountain electric bicycle for your needs? Whether you're a beginner or upgrading your current setup, this guide breaks down the key factors to consider so you can buy with confidence and enjoy every ride. ---- == 1. '''Understand Your Riding Style and Goals''' == Before choosing a mountain e-bike, think about where and how you plan to ride: * '''Light trails and forest paths?''' Choose a lightweight hardtail e-MTB. * '''Mixed terrain with some technical sections?''' Go for a versatile trail e-MTB. * '''Steep climbs, rocky descents, or bike park use?''' Opt for a full-suspension enduro or all-mountain e-MTB. * '''Daily off-road commuting or multi-day rides?''' Look for a comfortable, long-range model with racks and lights. Your intended terrain will shape the frame, suspension, and battery range you need. ---- == 2. '''Choose the Right Suspension: Hardtail vs. Full Suspension''' == Suspension determines how your bike handles rough terrain and absorbs shocks. === ● '''Hardtail (Front Suspension Only)''' === * Lighter, easier to maintain, and often more affordable * Best for smoother trails, gravel roads, and fitness riding * Great for beginners or those on a budget === ● '''Full Suspension (Front and Rear Suspension)''' === * Offers better traction, control, and comfort * Ideal for rough terrain, technical trails, and downhill riding * Slightly heavier and more expensive, but worth it for aggressive trail riding If you plan to ride rocky or root-filled trails, '''full suspension is recommended'''. ---- == 3. '''Understand Motor Types and Power''' == The motor is what gives an e-bike its boost. Most mountain e-bikes use '''mid-drive motors''', positioned near the pedals. === ● '''Mid-Drive Motors''' (e.g. Bosch, Shimano, Brose) === * Better weight distribution * More efficient climbing performance * Smooth and natural power delivery * Best for mountain biking Avoid rear hub motors for serious off-road use—they’re better suited for city bikes or hybrids. '''Tip:''' Look for motors offering '''60–90 Nm of torque''' for strong climbing ability. ---- == 4. '''Battery Size and Range Matter''' == Battery capacity determines how far you can ride on a single charge. * Measured in '''watt-hours (Wh)'''—the higher the number, the longer the range * '''500–700Wh''' batteries are common in mid-to-high-end mountain e-bikes * Some bikes offer '''dual battery systems''' for extra-long adventures Your range depends on factors like terrain, assist level, rider weight, and wind. If you're planning long trail rides or hilly routes, '''go for the largest battery you can afford'''. ---- == 5. '''Frame Size and Fit Are Crucial''' == A properly fitting frame makes a huge difference in comfort, control, and performance. Most brands provide sizing charts based on rider height. Also look for features like: * '''Adjustable seatposts (dropper posts)''' for on-the-fly height changes * '''Slack head tube angles''' for stable downhill riding * '''Steep seat tube angles''' for better climbing efficiency Whenever possible, test ride or measure before buying to ensure the right fit. ---- == 6. '''Drivetrain and Braking System''' == Your drivetrain and brakes must withstand the power of electric assist and trail conditions. * '''1x drivetrain''' (single front chainring, wide-range cassette) is ideal—simple and reliable * '''Brands like Shimano Deore, SLX, or SRAM SX/GX''' are great for e-MTB use * '''Hydraulic disc brakes''' (with large rotors, 180mm or more) are essential for safe downhill stopping power Avoid mechanical brakes or low-end drivetrains—they won’t perform well under trail stress. ---- == 7. '''Tires and Wheels for Trail Grip''' == Tires affect traction, comfort, and control on various surfaces: * '''27.5” wheels''': More agile, great for tight turns and jumps * '''29” wheels''': Roll over obstacles easier and offer better stability on climbs * '''Tire width''': Look for '''2.4" to 2.8"''' wide tires for grip and comfort * '''Tubeless-ready''': Helps reduce flats and allows lower pressure for better traction Match your tire setup to your trail style—looser trails benefit from wider, grippier tires. ---- == 8. '''Look for Smart Features and Tech''' == Many modern mountain e-bikes offer '''smart displays''', apps, and customization features. Look for: * '''LCD or LED display''' showing speed, range, and assist level * '''Assist modes''' (Eco, Trail, Boost, etc.) to control power delivery * '''Walk-assist function''' for pushing uphill * '''Bluetooth or app integration''' for tracking rides and adjusting settings These features enhance your ride experience and allow better control over your battery use. ---- == 9. '''Set a Realistic Budget''' == Mountain electric bikes come in a wide price range depending on features and build quality: * '''Entry-level:''' $1,500–$2,500 (hardtail, smaller battery, basic components) * '''Mid-range:''' $2,500–$4,500 (mid-drive motor, good suspension, 500–700Wh battery) * '''High-end:''' $5,000+ (full suspension, advanced motor, top-tier components) '''Pro tip:''' Don’t just chase low prices. Focus on value, brand reliability, warranty, and post-sale support. ---- == 10. '''Choose a Trusted Brand or Seller''' == Buying from a reputable brand or retailer ensures you get: * '''Warranty protection''' * '''Reliable customer service''' * '''Access to spare parts and repairs''' * '''Peace of mind''' with tested products Some well-known e-MTB brands include '''Trek, Giant, Cube, Haibike, Orbea, Specialized, and Canyon'''. If buying online, check return policies and customer reviews. ---- == Final Thoughts: Buy Smart, Ride Confidently == Choosing a mountain electric bicycle is about matching your riding style with the right features—motor, suspension, battery, and frame fit. A well-chosen e-MTB not only transforms how you ride but also boosts your confidence and enjoyment on the trail.our confidence and enjoyment on the trail.)
UN TOUR DE PLUS. + (Découper les tasseaux *Couper 4 tasseaux … Découper les tasseaux *Couper 4 tasseaux de 1350 mm (pieds). *Couper 2 tasseaux de 270 mm et 4 tasseaux de 410 mm (jonction entre les pieds). Assemblage des pieds *Prendre 2 tasseaux de 1350 mm *Les joindre en haut. *En bas, visser un tasseau de 270 mm à partir de 150 mm de l’extrémité basse. *Faire pareil avec les 2 autres tasseaux de 1350 mm et de 270 mm *Joindre les deux pieds avec les tasseaux de 410 mm : 3 tasseaux en bas et 1 en hautde 410 mm : 3 tasseaux en bas et 1 en haut)
Un tour de plus : + (Découper les tasseaux * Couper 4 tasseau … Découper les tasseaux * Couper 4 tasseaux de 1350 mm (pieds). * Couper 2 tasseaux de 270 mm et 4 tasseaux de 410 mm (jonction entre les pieds). Assemblage des pieds * Prendre 2 tasseaux de 1350 mm * Les joindre en haut. * En bas, visser un tasseau de 270 mm à partir de 150 mm de l’extrémité basse. * Faire pareil avec les 2 autres tasseaux de 1350 mm et de 270 mm * Joindre les deux pieds avec les tasseaux de 410 mm : 3 tasseaux en bas et 1 en hautde 410 mm : 3 tasseaux en bas et 1 en haut)
Oiseau automate à ailes battantes + (Pour réaliser le piston, utilisez un cercl … Pour réaliser le piston, utilisez un cercle de carton, une pique en bois et un morceau de carton. Pliez le morceau de carton pour lui donner une forme de petite « montre ». Insérez ensuite la pique à brochette au centre et fixez solidement l’ensemble avec de la colle chaude. Remarque : veillez à ce que le cercle ait un diamètre légèrement inférieur à celui de la base du gobelet pour permettre un bon ajustement. gobelet pour permettre un bon ajustement.)
Bentolux session octobre 2022 - Plateau Tournant Pokémon + ('''Afin de plus personnaliser la Bentolux, … '''Afin de plus personnaliser la Bentolux, j'ai conceptioné sur le logiciel 3D "TinkerCad" un nouveau bouton pour le potentiomètre.''' Afin de rester dans le thème de Pokémon, il comprendra une pokeball. L'image de la Pokeball à été vectorisé via le logiciel "Inkscape", puis insérer dans le logiciel de conception. Une fois le fichier 3D créer, on l'enregistre (au format stl) et on l'insère dans le logiciel "Cura". Une fois les paramètres rentrés, on peut créer le fichier gcode puis lancer l'impression.le fichier gcode puis lancer l'impression.)
CONDEPTION ET REALISATION D'UN FOUR SOLAIRE ECOLOGIQUE + (Afin de répondre a des besoins de réceptions optimale de l'énergie lumineuse, nous avons opté pour une forme qui épouse les 30° symétriques à l'axe du zénith du soleil ( 12h ).)
Veste clignotants pour cycliste + (A l'aide d'une craie ou d'un marqueur effa … A l'aide d'une craie ou d'un marqueur effaçable reproduisez votre design sur le vêtement. Utilisez une règle pour vous assurer que tout est droit et symétrique. Utilisez du scotch double face pour fixer temporairement les composants à votre vêtement. Cela vous donnera une bonne idée de ce à quoi ressemblera votre produit fini. Le scotch sert aussi à garder tout en place pendant la couture.à garder tout en place pendant la couture.)
Veste clignotants pour cycliste + (A l'aide d'une craie ou d'un marqueur effa … A l'aide d'une craie ou d'un marqueur effaçable reproduisez votre design sur le vêtement. Utilisez une règle pour vous assurer que tout est droit et symétrique. Utilisez du scotch double face pour fixer temporairement les composants à votre vêtement. Cela vous donnera une bonne idée de ce à quoi ressemblera votre produit fini. Le scotch sert aussi à garder tout en place pendant la couture.à garder tout en place pendant la couture.)
Poser du carrelage mural + (Alignez vos tasseaux sur cette ligne, percez directement au travers puis fixez-les à l’aide de chevilles adaptées à la nature de vos murs.)
Poser un plan de travail + (Appliquez maintenant contre le mur, le long du plan de travail un joint de silicone. Déposez un cordon régulier à l’aide du pistolet puis lissez au doigt.)
Mobi-doc + (Assemblez le cadre en vous assurant de la correspondance des encoches.)
Mobi-doc + (Assemblez le cadre en vous assurant de la correspondance des encoches.)
Fabrique ton établi + (→ Assemblez les barres métalliques et les connecteurs en bois.)
Fabrique ton établi + (→ Assemblez les barres métalliques et les connecteurs en bois.)
Remplacer un chauffe eau + (Assemblez le socle de votre nouveau chauffe-eau en emboîtant les montants dans les emplacements prévus à cet effet puis posez-le au plus près des tuyaux.)
Borne d'arcade + (Avant de commencer, il faut trouver ou tra … Avant de commencer, il faut trouver ou tracer des plans pour son bartop (la partie haute de la borne donc). Pour ma part je me suis inspiré des plans fournis par [https://fr.scribd.com/document/399080507/arcade-plans-package-8-5x11-print-updated-november-2016-pdf Ronildo Brandao]. Après les avoir imprimé et scotchés, puis reproduits sur des grandes feuilles A2, j'ai construit une magnifique maquette en carton, taille réelle, pour avoir une idée de la place que cela prendrait, de la taille d'écran que je pourrai mettre, et de la largeur disponible pour que deux grandes personnes puissent se lancer des Hadoken confortablement. Donc on imprime, on trace, on coupe, et on construit...me, on trace, on coupe, et on construit...)
Sàmi Band Heddle - Peigne à tisser + (Avec une découpeuse laser et le fichier ci-joint)
Lossless FLAC Splitter to Split FLAC in Original Quality + (Based on your system, select the proper ve … Based on your system, select the proper version of Joyoshare [https://www.joyoshare.com/video-cutter-win/ audio splitter] to download and install. Then, open the program and go to "Open" to access your local folder and choose the FLAC file to it. Or, you can drag and drop the FLAC audio file to the specified position to start.o file to the specified position to start.)
Showerloop - Guide 3: Connecting the pipes + (Basics - heat up your copper pipe with a b … Basics - heat up your copper pipe with a blowtorch. Focus the flame on the areas above and below where you will do the bending so that part doesn’t get hotter and thus weaker than the rest of the steel. Once the copper turns blackish and starts making a cool psychedelic rainbow effect you know the copper is warm enough to begin bending. Turn off the flame and wait a moment. Once the pipe has cooled a little use the pipe bending tool so make an appropriate bend. This is more craft than technical skill and you just have to observe and see how the metal flexes.

Don’t put too much pressure on one spot, this may result in a distorted pipe. You want to keep the diameter of the inner pipe as even as possible. Use a pipe bending tool.

r of the inner pipe as even as possible. Use a pipe bending tool.</div> </div>)
Build a Longboard from Scratch in Your Own Home + (Before you start putting together your lon … Before you start putting together your longboard, you'll need to do some cutting and drilling. Begin by cutting your threaded rods into two pieces, each 8 inches long. Use a fret file to smooth out the rods, which are 5/16" x 12" inches in size. Next, apply grip tape to the board. Cut the grip tape to be about one centimeter wider than the board, then press it onto the board and trim off any excess. With your 6º wedge riser, mark where you'll drill to attach the INOX Allen bolts, which are 1/4" x 1.5" in size. Ensure the marks are centered on the ends of your board. Safety is crucial, so wear gloves and safety glasses during this process. Carefully drill four holes, making sure they are clean and precise. We used a 3D-printed part to help us drill the holes in the cap perfectly centered. If you'd like access to the design for this part, please let us know, and we'll share it with you. Finally, position the drill in the middle of your 1" cap and drill each hole carefully. The 1" cap should have a similar appearance to the one shown in the image. appearance to the one shown in the image.)
Water probe 12+ activities + (Begin by soldering the male pin header str … Begin by soldering the male pin header strip onto the PCB board. You need to cover at least 10 points of the PCB (see figure below). Next, solder the 1kohm resistor to the PCB. We soldered one end to n°6, the other end to n°9. This way, when the PCB will be mounted on the arduino uno board, one end of the resistor will connect to A0, the other one to GND. Next, cut two pieces of electric wire, each about 20 cm long. The length doesn’t really matter, however, longer wires will enable you to distance the arduino board further away from liquids. Solder one end of one wire to one end of the resistor. This will connect to A0 on the board. Solder the other end to n° on the PCB. The latter will then connect with A5 on the arduino uno board. Strip off the other ends of the electric wire you just soldered onto the PCB, and connect them to the top of the binding post. Now cut two short pieces of electric wire (about 10 cm long each), and strip off both ends of each wire. Connect one end of each to the bottom part of the binding post. Curl the other end of each wire. The curly ends are the one which will dive into the liquid.e the one which will dive into the liquid.)
Faucheuse guidée par GPS RTK + (Le but est de fabriquer un prototype opéra … Le but est de fabriquer un prototype opérationnel de faucheuse capable de faucher l'herbe de manière autonome sur des terrains pouvant comporter des irrégularités importantes (prés plutôt que pelouses). Le confinement dans le champ ne peut pas être basé sur une limitation par barrière physique ou par fil guide enterré comme pour les robots de tonte pour les pelouses. Les champs à faucher sont en effet variables et de surface importante. Pour la barre de coupe, l'objectif est de maintenir la pousse de l'herbe à une certaine hauteur après une première tonte ou débroussaillage obtenus par un autre moyen.
aillage obtenus par un autre moyen. <br/>)
Arduino Python Multi-Capteur 2.4Ghz + (Un capteur de température intérieur, un ca … Un capteur de température intérieur, un capteur de température extérieur, un capteur d’humidité et un capteur de pression le tout connecté à un Arduino et les valeurs transférées par un émetteur en 2.4Ghz. Et pour la réception Raspberry, récepteur 2.4Ghz et du python. Voilà l’objet de ce petit tuto. Pour le montage de l’émetteur voici le schéma. Rien de très compliqué mais il y a beaucoup de fil… Bien penser aux résistances de 4.7K sur le récepteur de température et d’humidité. Et surtout attention l’émetteur 2.4Ghz fonctionne sous 3.3V.on l’émetteur 2.4Ghz fonctionne sous 3.3V.)
Arduino Python Multi-Capteur 2.4Ghz + (Un capteur de température intérieur, un ca … Un capteur de température intérieur, un capteur de température extérieur, un capteur d’humidité et un capteur de pression le tout connecté à un Arduino et les valeurs transférées par un émetteur en 2.4Ghz. Et pour la réception Raspberry, récepteur 2.4Ghz et du python. Voilà l’objet de ce petit tuto. Pour le montage de l’émetteur voici le schéma. Rien de très compliqué mais il y a beaucoup de fil… Bien penser aux résistances de 4.7K sur le récepteur de température et d’humidité. Et surtout attention l’émetteur 2.4Ghz fonctionne sous 3.3V.on l’émetteur 2.4Ghz fonctionne sous 3.3V.)
Openbioréacteur + ( * 1-Capteurs sans fils (hardware non impl … * 1-Capteurs sans fils (hardware non implémenté) * 2-Contrôleur chauffage, contrôleur agitation magnétique * 3-Contrôle des pompes, réception des données capteurs, et émission sur serveur annexe. * 4-Intrants La version que je présente ne comprend ni les capteurs, ni le contrôleur de chauffage, ni le contrôleur d'agitation magnétique. Ceci dans un souci de simplification. ue. Ceci dans un souci de simplification. )
Robot artiste avec Arduino + ( * Carte Arduino uno * Plateforme support … * Carte Arduino uno * Plateforme support de la carte, (par exemple une petite planche de 5 x7 cm en contreplaqué de 3mm d’épaisseur) * Batterie externe avec USB * Deux roues de « lego » ou à fabriquer avec une imprimante 3d * Deux servomoteurs arduino * Fils * Logiciel de codage Arduino ( à télécharger https://www.arduino.cc/en/software) * Un feutre avec pointe épaisse n/software) * Un feutre avec pointe épaisse )
The Remarkable Transformation of Lorenzo Castillo's Historic Home + (Castillo is a master of maximalism, and hi … Castillo is a master of maximalism, and his home is a testament to his ability to showcase art in a grand, yet cohesive, manner. His design philosophy revolves around incorporating art to its fullest potential, transforming every corner of the space into a visual feast. Walls are adorned with antique paintings, vintage mirrors, and an eclectic mix of decorative objects that span centuries. Rather than overwhelming the viewer, these layers of art and design create an immersive environment that feels both curated and organic. Castillo's deep knowledge of art history enables him to combine various artistic movements and historical periods with ease. His ability to meld these influences is what makes his design so unique—classic elements meet bold statements, resulting in spaces that are as intellectually stimulating as they are beautiful.ctually stimulating as they are beautiful.)
Atelier pour Arrosage automatique et autonome + (Choix notés ce soir: * quel type de pompe … Choix notés ce soir: * quel type de pompe ? (s'assurer qu'elle peut aller jusqu'au bout du mur) * batterie rechargeables ou pas ? * arrosage sur ou sous terre * circuit électronique simple, ou nano, ou nodemcu (rester dans du "standard") * quel panneau solaire? Doit-il pouvoir alimenter le moteur directement, ou faut il passer par des batteries pour avoir assez de puissance? Il y a même des tutos sur des [https://www.electronicshub.org/solar-battery-charger-for-18650/ circuits de recharge utilisant un simple TP4056] connecté au panneau et à la batterie! Est-ce sérieux? (Autre composant apprécié : J5019) Ci-joint un panneau que j'ai, de 12V , 3,5W, 290mA.un panneau que j'ai, de 12V , 3,5W, 290mA.)
123Tourelle + (Code Arduino commenté en fichiers joints ; … Code Arduino commenté en fichiers joints ; voir le code pour les détails (fichier 123Tourelle_IMT_Bento_123Soleil.ino)

Le programme nécessite l'installation de plusieurs librairies Adafruit (voir lignes "include"), pensez à les installer

Le code comprend toute une mécanique pour sélectionner le mode via le potentiomètre. L'utilisation du potentiomètre a été essentiellement choisie pour les besoins de la formation (mais apporte aussi un feeling plus agréable pour ma part) ; cependant un simple bouton poussoir ou capteur capacitif aurait été plus adapté et plus précis.

La vérification de la victoire du joueur pourrait être améliorée (plus propre) par l'utilisation des interruptions (bouton poussoir ou récepteur capacitif), au lieu de tester dans une boucle. Cependant, côté ressenti utilisateur, peu de différence à prévoir.

Le code occupe plus de 90% de la mémoire de l'Arduino. Des actions ont du être effectuées pour réduire l'impact mémoire : chaines de caractères mises dans mémoire intégrée à l'Arduino, suppression de quelques animations plus ou moins superflues, suppression de certains "define", suppression de tous les messages de type Serial.print

Pour éviter les "tremblements" du servo, celui-ci est activé (fonction "attach") à chaque besoin, puis désactivé ("detach") lorsque l'on n'en a plus besoin immédiatement

<i class="fa fa-info-circle"></i></div> <div class="icon-instructions-text">Pour éviter les "tremblements" du servo, celui-ci est activé (fonction "attach") à chaque besoin, puis désactivé ("detach") lorsque l'on n'en a plus besoin immédiatement</div> </div>)
Makers' beehive + ('''Commencer par monter le dessous du toit … '''Commencer par monter le dessous du toit:''' * Positionner les barrettes intérieures sous la planche de bois centrale, * Situer les barrettes extérieures contre les deux extrémités de la planche de bois centrale, ''Remarque: le tout ne doit pas encore tenir par lui-même.'' '''Puis mettre la toiture en place:''' * A l’aide des 4 barrettes de bois, fixés les deux côté de la toiture comme la photo ci-dessous. Les encoches se trouvent à l’intérieur, * Fixer les deux planches restante comme ci-dessous afin de fermer le toit, * En utilisant de la colle à bois, habiller le toit à l’aide des deux planche restantes. toit à l’aide des deux planche restantes.)
Monter un receveur et des parois de douche + (Commencez par l’installation du mitigeur.)
Musical e-textile bag + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
E-textile blinking bag + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
Musical e-textile bag + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
E-textile blinking bag + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
Quizmaster avec mBlock et Arduino + (Connectez dans mBlock. *Allez dans le menu … Connectez dans mBlock. *Allez dans le menu connecter, par port série. Sélectionne le COM disponible *Allez dans le menu choix de la carte, sélectionnez l’Arduino UNO *Allez dans le menu connecter, téléverser le microprogramme de communication Utilisez un petit programme pour tester les boutons. Dans pilotage, allez chercher l'instruction ''mettre l'état logique de la broche ... à haut/bas''. Si on clique sur le drapeau vert, la lumière du bouton A doit s'allumer. Réessayez pour les boutons B et C.llumer. Réessayez pour les boutons B et C.)
Quizmaster avec mBlock et Arduino + (Connectez dans mBlock. *Allez dans le menu … Connectez dans mBlock. *Allez dans le menu connecter, par port série. Sélectionne le COM disponible *Allez dans le menu choix de la carte, sélectionnez l’Arduino UNO *Allez dans le menu connecter, téléverser le microprogramme de communication Utilisez un petit programme pour tester les boutons. Dans pilotage, allez chercher l'instruction ''mettre l'état logique de la broche ... à haut/bas''. Si on clique sur le drapeau vert, la lumière du bouton A doit s'allumer. Réessayez pour les boutons B et C.llumer. Réessayez pour les boutons B et C.)
Désalinisateur solaire à concentration + (Il convient d'adapter les dimensions du distillateur en fonction des matériaux disponibles . Par exemple, la taille de la base pourra dépendre de la vitre disponible. Les proportions des plans données si contres peuvent sinon être prise tel-quelles.)
CHEVALET pour PEINTRE AMATEUR + (Couper 3 tasseaux de 170cm. Couper un tass … Couper 3 tasseaux de 170cm. Couper un tasseau traverse basse 75cm. Couper une planche 10 x 35 cm ( chute d'un bricolage précédent). Monter le tasseau central sur la traverse et la planche. Coller ou visser. Avec la fausse équerre tracer l'emplacement des tasseaux latéraux. Positionner. Bloquer avec serre-joint, visser. Couper les extrémités rouges a b c d rouges sur le schéma. Poncer.uges a b c d rouges sur le schéma. Poncer.)
SolarOSE - Guide 2: Mirror facets + (Cut to a length of 2000 mm the aluminum tubes of 40x20 mm (or buy them with these dimensions). Drill a hole of 5 mm centered on the width, at 100 mm from each extremity. Tap (thread) this hole, made for a screw with a diameter of 6 mm (M6).)
SolarOSE - Guide 2: Mirror facets + (Cut to a length of 2000 mm the aluminum tubes of 40x20 mm (or buy them with these dimensions). Drill a hole of 5 mm centered on the width, at 100 mm from each extremity. Tap (thread) this hole, made for a screw with a diameter of 6 mm (M6).)
SolarOSE - Guide 3: Support structure of the receiver + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
SolarOSE - Guide 3: Support structure of the receiver + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
My Lil' Pumpkin + (Cut out the holes on the PVC pipes, drill holes, on the circular lids. <br/>)
Fibonacci Clock + (Cut 4 plywood board for outside walls, 2 o … Cut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
SolarOSE - Guide 4: Skeleton of the receiver + (Cut the 30x30x2300 mm square tube. Drill the fixation holes of the tepee. Drill and tap at 5 mm diameter the fixation holes of the junction.)
SunZilla - Guide 1: Preparing the aluminium profiles + (Cut the aluminum profiles according to the technical drawings in the attached PDFs. Once you have them in hand, the first step is to file the ends of the profiles to deburr them, as shown in the picture.)
Solar coffee roaster (using a Scheffler concentrator) + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
Solar coffee roaster (using a Scheffler concentrator) + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
Standing desk made from 2x12’ wood board and plumbers pipe + (I cut the boards to the finish length of 5’6” using a speed square to make sure I was getting a perfect right angle cut.)
Standing desk made from 2x12’ wood board and plumbers pipe + (I cut the boards to the finish length of 5’6” using a speed square to make sure I was getting a perfect right angle cut.)
Collar with a small copper tube + (Cut the copper tube 3 cm in length with a pipe cutter pliers)
Collar with a small copper tube + (Cut the copper tube 3 cm in length with a pipe cutter pliers)
Spinning Kinetic Sculpture RGB + (Cut the first svg file on 2 sheets of 300c … Cut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
SolarOSE - Guide 7: Assembling of the receiver + (Cut the squared tube at a length of 2.2 m. Put the 10 hangers on the squared tube, with a spacing of 22 cm.)
Cyclo Projecteur + (Dans cette étape je vais vous décrire comm … Dans cette étape je vais vous décrire comment j'ai réalisé les deux enceintes pour le projet
*Réalisation du plan svg que j'ai réalisé sous un logiciel gratuit Inkscape avec les réservations une prise banane, un trou pour l'aération de l'enceinte et une réservation pour la membrane de l'enceinte. (vous trouverez dans l'onglet fichiers le fichier SVG en question) *Découpage laser sur une planche de bois en peuplier épaisseur 5 mm *Vernissage des éléments découpés *Assemblage des éléments avec de la colle à bois, j'ai laissé la partie inférieure non collée pour accéder à l'enceinte en cas de soucis technique *mise en place de la membrane et de la prise banane *Branchement du fil rouge sur la prise rouge *Branchement du fil noir sur la prise noire
*Branchement du fil noir sur la prise noire<br/>)
Guéridon coffre en bois + (Dans la malette d'assemblage undercover wo … Dans la malette d'assemblage undercover wolfcraft (vissage en biais) il y a des instructions fourni avec le kit. Il y a des réglages à faire en fonction de l'épaisseur du bois à assembler.(pas d'inquiétude c'est facile). Positionner le guide en plastique sur les différents morceaux de bois, tenir le tout avec un serre-joint avant de percer avec le foret fourni dans le kit. Percer tout les tasseaux avant d'assembler le cadre,ne pas oublier de réaliser les trous pour assembler le fond du coffre. Faire 2 perçages par coté, comme pour l'assemble du cadre. Assembler le cadre en vissant dans les trous réalisés, puis assembler le fond du cadre. Cette technique est facile et permet un assemble à vis invisible de l'extérieur du meuble. à vis invisible de l'extérieur du meuble.)
Guéridon coffre en bois + (Dans la malette d'assemblage undercover wo … Dans la malette d'assemblage undercover wolfcraft (vissage en biais) il y a des instructions fourni avec le kit. Il y a des réglages à faire en fonction de l'épaisseur du bois à assembler.(pas d'inquiétude c'est facile). Positionner le guide en plastique sur les différents morceaux de bois, tenir le tout avec un serre-joint avant de percer avec le foret fourni dans le kit. Percer tout les tasseaux avant d'assembler le cadre,ne pas oublier de réaliser les trous pour assembler le fond du coffre. Faire 2 perçages par coté, comme pour l'assemble du cadre. Assembler le cadre en vissant dans les trous réalisés, puis assembler le fond du cadre. Cette technique est facile et permet un assemble à vis invisible de l'extérieur du meuble. à vis invisible de l'extérieur du meuble.)
Petit bras robotique + (Dans mBlock ouvrez un nouveau dossier. N'o … Dans mBlock ouvrez un nouveau dossier. N'oubliez pas les étapes : - connecter le câble usb après branchement - connecter > usb - téléverser le microporgramme - cliquer le drapeau vert Pour ceci on cré une variable, position. Changez la variable quand on presse la flèche droite. De combien de degrés est-ce qu'on peut changer la position du moteur ?ce qu'on peut changer la position du moteur ?)
Meuble à roulettes pour enceintes M Audio + (Dans un premier temps, il faut dessiner un … Dans un premier temps, il faut dessiner un plan du meuble et calculer les dimensions que vous souhaitez lui donner. Dans ma planche de bétonplex j'ai pu découper la totalité de mes planches pour fabriquer deux meubles identiques. # Tracer les traits pour vos découpes. Moi j'ai tracé puis découpé tout de suite le premier morceau du meuble car la lame de la scie circulaire est épaisse donc il y aura forcément un décalage dans vos dimensions si vous tracez toutes vos lignes et les découpez à la chaîne. Donc je trace, je coupe, je re-mesure, je trace, je coupe, etc, autant de fois qu'il le faut pour avoir découpé toutes les parties du meuble. # L'utilisation de la scie circulaire se fait avec précaution. Il faut porter un casque anti-bruit et des gants, et les gens dans la pièce doivent aussi porter un casque pour protéger leurs oreilles.er un casque pour protéger leurs oreilles.)
Erosion + (- Découpe laser - Planche en bois épaisseur 3 mm (60x100) - Cutter - Papier émeri - Lime ronde/demi-ronde/en feuille de sauge - Colle à bois - Mouvement quartz)
Torréfacteur de café à énergie solaire (pour concentrateur de Scheffler) + (Découper dans les barres, plats et cornièr … Découper dans les barres, plats et cornières (en L) aux longueurs tel qu'indiqué dans le tableau suivant : Type d'élément Longueur Longueur Largeur / Hauteur / totale pièce Diamètre Epaisseur Indication de destination de la pièce Tube carré 50x50 (angles arrondis) 4000 50 50 mat central (découpe côté bas à 25°) 530 support modifié Scheffler, patte gauche 1165 support modifié Scheffler, patte droite 1165 Barre d'accouplement au Scheffler! (870 ? Ajuster à France : suivant mesures réelles) 1000 RESTE BRUT (hors épaisseur des découpes) 140 Profilé L 35x35, épaisseur 4 (au lieu de 3.5mm 2000 35 3 base support (coupes à 45° : voir photo étape #) 280 base support (coupe à 45° et 25° : voir photo) 463 base support (coupe à 45° et 25° : voir photo) 463 base support 270 base support 270 RESTE BRUT (hors épaisseur des découpes) 254 Profilé L 25x25, épaisseur 3mm 2000 25 3 toit support (adapter selon panneau PV) 196 toit support (adapter selon panneau PV) 196 toit support (adapter selon panneau PV) 280 toit support (adapter selon panneau PV) 280 toit support (adapter selon panneau PV) 188 toit support (adapter selon panneau PV) 188 fixation toit support (suivant PV) (ou plat 50mm) 147 fixation toit support (suivant PV) (ou plat 50mm) 147 RESTE BRUT (hors épaisseur des découpes) 378 plat larg. 50mm ép 8mm (au lieu de épaisseur 3mm) 2000 50 8 fixation basse mat central 140 fixation basse mat central 140 renforts maintien mat central au bon angle 70 pattes scheffler ! 150 pattes scheffler ! 150 pattes scheffler ! 150 pattes scheffler ! 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 fixation de barre d'accouplement au scheffler… 100 fixation de barre d'accouplement au scheffler… 100 RESTE BRUT (hors épaisseur des découpes) 250 Plat larg. 35mm, (ép 4?) 1000 35 4 bras maintien tambour ! 960 RESTE BRUT (hors épaisseur des découpes) 40 Plat larg. 25mm (pour 25 et 35), ép 4 (au lieu de 3mm) 2000 25 4 pour cerclage tambour 900 pour base support (remplace plat 35) 280 pour base support (remplace plat 35) 203 patte fixation pour refroidisseur (ou accouplement au Scheffler) 72 patte fixation pour refroidisseur (ou accouplemt) 72 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 RESTE BRUT (hors épaisseur des découpes) 333 Tube rond Diamètre 49mm, ép 3mm 1000 49 3 pour support roulements axe tambour 100 RESTE BRUT (hors épaisseur des découpes) 900 Barre ronde pleine Diamètre 20mm 1000 20 découpé pour axe tambour (à percer/évider à une extrémité : diamètre 8mm, profondeur 10mm) 215 RESTE BRUT (hors épaisseur des découpes) 785 Barre ronde pleine Diamètre 12mm 1000 12 pour maintien latéral tambour 100 pour maintien latéral tambour 100 RESTE BRUT (hors épaisseur des découpes) 800E BRUT (hors épaisseur des découpes) 800)
Torréfacteur de café à énergie solaire (pour concentrateur de Scheffler) + (Découper dans les barres, plats et cornièr … Découper dans les barres, plats et cornières (en L) aux longueurs tel qu'indiqué dans le tableau suivant : Type d'élément Longueur Longueur Largeur / Hauteur / totale pièce Diamètre Epaisseur Indication de destination de la pièce Tube carré 50x50 (angles arrondis) 4000 50 50 mat central (découpe côté bas à 25°) 530 support modifié Scheffler, patte gauche 1165 support modifié Scheffler, patte droite 1165 Barre d'accouplement au Scheffler! (870 ? Ajuster à France : suivant mesures réelles) 1000 RESTE BRUT (hors épaisseur des découpes) 140 Profilé L 35x35, épaisseur 4 (au lieu de 3.5mm 2000 35 3 base support (coupes à 45° : voir photo étape #) 280 base support (coupe à 45° et 25° : voir photo) 463 base support (coupe à 45° et 25° : voir photo) 463 base support 270 base support 270 RESTE BRUT (hors épaisseur des découpes) 254 Profilé L 25x25, épaisseur 3mm 2000 25 3 toit support (adapter selon panneau PV) 196 toit support (adapter selon panneau PV) 196 toit support (adapter selon panneau PV) 280 toit support (adapter selon panneau PV) 280 toit support (adapter selon panneau PV) 188 toit support (adapter selon panneau PV) 188 fixation toit support (suivant PV) (ou plat 50mm) 147 fixation toit support (suivant PV) (ou plat 50mm) 147 RESTE BRUT (hors épaisseur des découpes) 378 plat larg. 50mm ép 8mm (au lieu de épaisseur 3mm) 2000 50 8 fixation basse mat central 140 fixation basse mat central 140 renforts maintien mat central au bon angle 70 pattes scheffler ! 150 pattes scheffler ! 150 pattes scheffler ! 150 pattes scheffler ! 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 adaptation fixation cuisine par défaut (Scheffler) 150 fixation de barre d'accouplement au scheffler… 100 fixation de barre d'accouplement au scheffler… 100 RESTE BRUT (hors épaisseur des découpes) 250 Plat larg. 35mm, (ép 4?) 1000 35 4 bras maintien tambour ! 960 RESTE BRUT (hors épaisseur des découpes) 40 Plat larg. 25mm (pour 25 et 35), ép 4 (au lieu de 3mm) 2000 25 4 pour cerclage tambour 900 pour base support (remplace plat 35) 280 pour base support (remplace plat 35) 203 patte fixation pour refroidisseur (ou accouplement au Scheffler) 72 patte fixation pour refroidisseur (ou accouplemt) 72 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 pour surélever profilé L support (épaisseur vis…) 35 RESTE BRUT (hors épaisseur des découpes) 333 Tube rond Diamètre 49mm, ép 3mm 1000 49 3 pour support roulements axe tambour 100 RESTE BRUT (hors épaisseur des découpes) 900 Barre ronde pleine Diamètre 20mm 1000 20 découpé pour axe tambour (à percer/évider à une extrémité : diamètre 8mm, profondeur 10mm) 215 RESTE BRUT (hors épaisseur des découpes) 785 Barre ronde pleine Diamètre 12mm 1000 12 pour maintien latéral tambour 100 pour maintien latéral tambour 100 RESTE BRUT (hors épaisseur des découpes) 800E BRUT (hors épaisseur des découpes) 800)
Spinning Kinetic Sculpture RGB + (Découper le premier fichier svg sur 2 plan … Découper le premier fichier svg sur 2 planches de 305 par 305, [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Faire de même pour le deuxième fichier, [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. La taille de la découpe peut tenir sur un carré de 300x300cm mais j’ai laissé quelques millimètres de rab. Si vous avez un espace de découpe de 600 par 300 alors vous pouvez les découper deux par deux en fusionnant les deux fichiers. Rassembler les mêmes pièces entre elles pour être plus organisé avant de tout coller.r être plus organisé avant de tout coller.)
Spinning Kinetic Sculpture RGB + (Découper le premier fichier svg sur 2 plan … Découper le premier fichier svg sur 2 planches de 305 par 305, [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Faire de même pour le deuxième fichier, [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. La taille de la découpe peut tenir sur un carré de 300x300cm mais j’ai laissé quelques millimètres de rab. Si vous avez un espace de découpe de 600 par 300 alors vous pouvez les découper deux par deux en fusionnant les deux fichiers. Rassembler les mêmes pièces entre elles pour être plus organisé avant de tout coller.r être plus organisé avant de tout coller.)
Séchoir solaire compact + ( *découpez les panneaux de bois avec les o … *découpez les panneaux de bois avec les outils à votre disposition (scie sur table, à onglet, à ruban, circulaire etc.) et selon le plan en photo et ou en svg dans l'onglet fichier du tuto (pour laser et cnc)

Attention : l'emplacement des petits et grands trous dépend de l'épaisseur de vos tasseaux et de la taille du ventilateur que vous avez récupéré. En cas de doute, ne percez pas immédiatement

pour la production de série, vous pouvez créer des modèles au laser ou à la CNC et découper les formes dans des planches de rebut à l'aide d'une défonceuse et d'une mèche à copier.

r ou à la CNC et découper les formes dans des planches de rebut à l'aide d'une défonceuse et d'une mèche à copier.</div> </div> )
Revisite du jeu du morpion en bois et pmma + (Dédié à être utilisé par les enfants et no … Dédié à être utilisé par les enfants et notamment les plus petits au sein de notre fablab, j'ai opté pour une grille de 3 sur 3. Le socle du plateau est en PMMA 3mm brillant et la grille accueillant les pions est en contreplaqué 3mm. J'ai choisi un design arrondi pour le plateau de jeu en vue d'une préhension plus aisée pour les enfants.

Vous pouvez opter pour une grille de 4*4 voir même de 5*5 si vous souhaitez un jeu avec une difficulté accrue.

même de 5*5 si vous souhaitez un jeu avec une difficulté accrue.</div> </div>)
Tree planting (Aranya Agricultural Alternatives method) + ( *Define the plantation zone, *Make sure t … *Define the plantation zone, *Make sure that your sapling is ready for transplantation, *Make sure that weather conditions will be favorable for the young tree to grow (avoid dry season peak), *If applicable, [[Clay-pot-irrigation system (Aranya Agricultural Alternatives method)|build your clay-pot irrigation system]], *If applicable, [[Tree planting preparation (Sadhana Forest method)|build your bottle-irrigation system]]. Feel free to adapt the procedure to your environment. to adapt the procedure to your environment. )
Installer un porte d'entrée + (Dégagez le bâti au burin et à la massette.)
Arrosage automatique de l'école ACJ + ( *Déterminer les zones ou mettre des capteurs (humidité, luminosité, et température) *Déterminer les zones à arroser *Déterminer les types de plantes et leurs besoins *Vérifier comment avoir accès à l'eau et à l'électricité )
Biodigesteur domestique + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
Biodigesteur domestique + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
Showerloop - Manuel n°2 : Les filtres + (Il y a 3 disques de compression par filtre … Il y a 3 disques de compression par filtre. Deux aux deux extrémités pour compresser le sable et le charbon actif et un entre le sable et le charbon actif! Le disque de compression dans le fichier est imbriqué dans le vide de la plaque de support pour économiser du matériel!ue de support pour économiser du matériel!)
Jardin Vertical - Made in Albilab - Concours Castorama + (<div class="icon-instructions caution-i …

Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.

Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
Jardin Vertical - Made in Albilab - Concours Castorama + (<div class="icon-instructions caution-i …

Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.

Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
Robot "ABC" in wood + (<div class="mw-translate-fuzzy"> Let's start with the base by adding support with it's stack connected to the 3 green LEDs. </div> <div class="mw-translate-fuzzy"> Take 4 screws M4 insert them in the 4 holes then fix 1 nut on each screws. </div>)
Dôme Géodésique Fréquence 2 paramétrable + (Un dôme géodésique est une structure aux m … Un dôme géodésique est une structure aux multiples propriétés très intéressantes : outre l’aspect esthétique original, ce type de structure offre une excellente résistance aux intempéries et une résistance mécanique élevée. Elle est composée de montants (en bois, métal, PVC...) reliés entre eux par des connecteurs. Lors de la conception d’un dôme : plusieurs facteurs sont à prendre en compte : *Le diamètre : Plus il est élevé, plus la construction du dôme sera complexe et plus la hauteur sous plafond du dôme sera importante (hauteur sous plafond = rayon du dôme). A noter que toute construction dépassant 20 m² doit faire l’objet d’une demande de permis de construire auprès de la commune. *La fréquence : Pour un diamètre donné, il est possible de construire le dôme avec une densité plus ou moins élevée de montants et de connecteurs : c’est ce qu’on appelle la fréquence. Ici nous allons réaliser un dôme de fréquence 2, le plus simple à réaliser (et donc le moins coûteux), cependant la méthodologie reste applicable pour tous types de dôme. *Le support : Selon l’utilisation du dôme il faut prévoir un système de support (ou base) : dans notre cas l’utilisation du dôme en tant que serre nous permet de poser directement le dôme sur des plots en béton sans construire de plancher. poser directement le dôme sur des plots en béton sans construire de plancher.)
MicroHouse + (Download on our [https://github.com/wikiho … Download on our [https://github.com/wikihouseproject/Microhouse/ Github repo] the set of milling drawings which can be used by CNC cutter to fabricate the house parts. Cut the part by a CNC mill using locally bought material. This is 18mm plywood, in the standard sheet size of 2440mm x 1220mm (8' x 4') Each component can be combined or adapted to form a structure which responds to an individual site or set of needs.nds to an individual site or set of needs.)
DIY Solar Charger + (Draw the diagram of the charger)
Drone marin de surface - "Lin-Croyable" + (Il est judicieux de commencer ce montage p … Il est judicieux de commencer ce montage par le lancement des impressions 3D qui prennent du temps afin d’éviter d’être bloqué à attendre devant l’imprimante 3D en attendant que l’étrave finissent ses quelques 15h d’impression.. Il faut donc lancer les quelques impressions suivantes avec es fichiers joint dans la partie « fichiers » : Paramètre généraux : Vitesse d’impression = 50 mm/s ; vitesse remplissage= 50mm/s Fils conseillé : ColorFabb Bobine PLA/PHA couleur Naturel (meilleur performance que les autres couleurs)lleur performance que les autres couleurs))
LÜMBOX + (Fichier cnc dans l'onglet fichier de ce tutoriel.)
Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
FabCat House + (Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.)
FabCat House + (Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.)
Salad tongs + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
Salad tongs + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
8bits & Chocolate - decorative candy dispenser + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))

Recherche par propriété

Liste de résultats

Welcome to the HTML editor!

Heading in h2, som more sample text

Heading in h3, som more sample text

Welcome to the HTML editor!

Heading in h2, som more sample text

Heading in h3, som more sample text

Welcome to the HTML editor!

Heading in h2, som more sample text

Heading in h3, som more sample text