Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• KALO' MATON Photomaton automatique à base de Raspberry Pi  + (Pour commencer ce tutoriel, vous allez avo … Pour commencer ce tutoriel, vous allez avoir besoin d’un ordinateur sur lequel vous allez installer Balena Etcher : https://www.balena.io/etcher/, qui est un logiciel libre de gravure d’images pour différents supports (clé USB, carte SD) pour GNU/Linux, Windows et MacOS. (Voir photos) Insérez votre carte SD dans un adaptateur USB qui lui est branché dans l'ordinateur avec lequel vous avez installé Etcher, puis cliquez sur "Select Image" et choisissez le Full.zip de Raspbian précédemment installé. Le disque dur sera normalement déjà sélectionné, mais si besoin, changez, et mettez votre adaptateur USB. Puis cliquez sur "Flash!" et attendez la fin du chargement. (J'ai du recommencer une autre fois, pour je ne sais quelle raison le premier essai fût un échec).lle raison le premier essai fût un échec).)
• Moteur Stirling  + (Pour débuter notre projet, nous avons comm … Pour débuter notre projet, nous avons commencé par établir une idée globale de ce à quoi il devrait ressembler dans sa version finale, puis de là, nous avons pu dresser une liste des différentes pièces majeures qui le constitueront. Après avoir récupéré nos premières chutes de bois, nous avons constitué la structure principale : *Deux supports secondaires pour les seringues *Un support principale pour soutenir l'arbre Nous pensons ajouter des roulements à billes pour minimiser les frottements lors de la rotation, et nous recherchons activement des seringues en verre, le dimensionnement du reste de la structure et des pièces 3D dépend de la taille de celles-ci (Nous en avons commandé mais elles viennent de Chine et le temps de livraison est trop long). En parallèle nous avons fait les calculs de rendement et pour nous assurer du déphasage nécessaire entre les deux roues (Pi/2) comme nous l'avons vu dans la littérature
  e nous l'avons vu dans la littérature<br/>)
• Moteur Stirling  + (Pour débuter notre projet, nous avons comm … Pour débuter notre projet, nous avons commencé par établir une idée globale de ce à quoi il devrait ressembler dans sa version finale, puis de là, nous avons pu dresser une liste des différentes pièces majeures qui le constitueront. Après avoir récupéré nos premières chutes de bois, nous avons constitué la structure principale : *Deux supports secondaires pour les seringues *Un support principale pour soutenir l'arbre Nous pensons ajouter des roulements à billes pour minimiser les frottements lors de la rotation, et nous recherchons activement des seringues en verre, le dimensionnement du reste de la structure et des pièces 3D dépend de la taille de celles-ci (Nous en avons commandé mais elles viennent de Chine et le temps de livraison est trop long). En parallèle nous avons fait les calculs de rendement et pour nous assurer du déphasage nécessaire entre les deux roues (Pi/2) comme nous l'avons vu dans la littérature
  e nous l'avons vu dans la littérature<br/>)
• Mode opératoire Silhouette CAMEO  + (Taille de la page a couper : largeur 245 pour le rouleau entier Taille du tapis de coupe CAMEO 12 x 12 pour le petit tapis et 12 x 24 pour le grand tapis)
• Basic Multi-Modular Frames for Cargo Bikes - Stackable watertight laser cut boxes by Velo M2  + (Prepare and set the parameters of the Laser Cutter to cut through 10mm plywood. Check you parameters and make a few test to find the good settings. This is dependent on the type of machine.)
• SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
• SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
• Applique Abat-Jour Mural Volcano  + (Privilégier '''un fournisseur qui garantis … Privilégier '''un fournisseur qui garantisse un contreplaqué compatible avec une découpe laser.''' (Il parait que certaines colles utilisées pour fabriquer le contreplaqué peuvent être source de problèmes, voire de dangers lors de la découpe.) Je me suis approvisionné jusqu'à présent par l'intermédiaire du Fablab que je fréquente.'intermédiaire du Fablab que je fréquente.)
• Personnalise ton puzzle  + (Présentation succincte de l’atelier. Nous allons créer un dessin sur l’ordinateur et le traduire dans un langage que la découpeuse peut comprendre : un dessin en vecteur. Qu’est-ce qu’un un pixel ? Un vecteur ? Explication de la différence entre les deux.)
• Personnalise et fabrique un jeu du morpion  + (Présentation succincte de l’atelier. Nous allons créer un dessin sur l’ordinateur et le traduire dans un langage que la découpeuse peut comprendre : un dessin en vecteur. Qu’est-ce qu’un un pixel ? Un vecteur ? Explication de la différence entre les deux.)
• Création de stickers autocollants  + (Présentation succincte de l’atelier. Nous allons créer un dessin sur l’ordinateur et le traduire dans un langage que la découpeuse peut comprendre : un dessin en vecteur. Qu’est-ce qu’un un pixel ? Un vecteur ? Explication de la différence entre les deux.)
• Porte-Clefs Puzzle  + (Présentation succincte de l’atelier. Qu’est-ce qu’un un pixel ? Un vecteur ? Explication de la différence et également du principe derrière le porte-clefs puzzle. L’explication du porte-clefs puzzle peut se faire sur papier, à partir d’un post-it.)
• Concours de Tangram  + (Présentation succincte de l’atelier. Nous … Présentation succincte de l’atelier. Nous allons créer un dessin sur l’ordinateur et le traduire dans un langage que la découpeuse peut comprendre : un dessin en vecteur. Qu’est-ce qu’un un pixel ? Un vecteur ? Explication de la différence entre les deux.plication de la différence entre les deux.)
• Losslessly Combine WebM Files in 2020  + (Quickly download and install Joyoshare [ht … Quickly download and install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on Windows or Mac. After that, you should open it and click "Open File" to choose your WebM files. Alternatively, you can drag and drop files from desktop to the program.nd drop files from desktop to the program.)
• IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
• IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
• Collier personnalisé en graines de Caconnier  + (Récupérer des graines de caconnier, du fil de pêche, des chutes de contreplaqué et du bois peyi.)
• Mighty maker level belt  + (Set up a temporary circuit using a bread b … Set up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
• Maintenance Trotec Speedy 300 : Realigner le miroir 2  + (Pour éviter de l'endommager dans la procédure qui suit.)
• Maintenance Trotec Speedy 300 : Realigner le miroir 2  + (Avec un petit feutre)
• Jeux d'adresse  + (Si vous préférez dessiner sur un papier pr … Si vous préférez dessiner sur un papier prenez un feutre noir et réaliser la forme de votre carton et remplissez la (penser à laisser des espaces blancs pour les trous) puis vectoriser le dessin sur Inkscap. Ou sinon passez directement sur le logiciel Inkscap et réalisez le modèle que vous voulez ou prenez une image Open Source sur internet.prenez une image Open Source sur internet.)
• Jeux d'adresse  + (Si vous préférez dessiner sur un papier pr … Si vous préférez dessiner sur un papier prenez un feutre noir et réaliser la forme de votre carton et remplissez la (penser à laisser des espaces blancs pour les trous) puis vectoriser le dessin sur Inkscap. Ou sinon passez directement sur le logiciel Inkscap et réalisez le modèle que vous voulez ou prenez une image Open Source sur internet.prenez une image Open Source sur internet.)
• Conductive paint + Makey Makey  + (Simply mix the glue with the graphite powd … Simply mix the glue with the graphite powder in equal parts. You can add more glue than graphite powder if you believe you don’t have enough powder. When done, add water as needed to reach the desired consistency. Your mixture needs to have roughly the same consistency as real paint. Watch [https://www.youtube.com/watch?v=phEke_LZJlk this] video for extra help.?v=phEke_LZJlk this] video for extra help.)
• Conductive paint + Makey Makey  + (To check whether your conductive paint is … To check whether your conductive paint is indeed conductive, we can run a test with the aid of a voltmeter. Paint a straight line on a sheet of paper. Then place the two ends of the voltmeter (the red one and the black one) each at one end of the line. Place the cursor of the voltmeter in a position to read the value of resistance and a number should display on your voltmeter.a number should display on your voltmeter.)
• Water probe  + (Solder a strip of male headers (about 10 p … Solder a strip of male headers (about 10 pins) onto the PCB. Beware that one pin needs to go into GND on the arduino board, another one into A5 and a third one into A0. Grab the 10kOhm resistor. Solder one end onto the header pin which goes into GND on the arduino board, the other end of the resistor onto the header pin which end on A0 in the arduino board. This way the resistor will basically create a bridge between GND and A0 on the arduino board. Grab two pieces of solid core wire (about 30cm long each)  and strip both ends of each piece. Solder one end of the first wire onto the header pin which ends in A5; solder one end of the second piece of wire onto the header pin which ends in A0 on the arduino board. Connect the other ends of the pieces of solid core wire to the binding post. One end goes into the red part of the post, the other end goes into the black part of the binding post. Now cut two pieces of solid core wire (about 10 cm long each), and strip both ends of each wire. Connect one end of each piece of wire to the metal ends of the binding post. Use the bolts to secure the solid core wire in place. Curl the other ends. Lastly, try placing the PCB on the arduino board, and make sure that one pin goes into GND, another into A0 and a third pin into A5., another into A0 and a third pin into A5.)
• Mise en service d'un thermomètre connecté  + (-connecter l'ESP01 sur le shield -relier l'alimentation de la cellule au SHIELD)
• Mise en service d'un thermomètre connecté  + (-connecter l'ESP01 sur le shield -relier l'alimentation de la cellule au SHIELD)
• Pandora vs Spotify in 2021  + (Spotify has a vast number of songs in its … Spotify has a vast number of songs in its ever-growing music library, which already reaches 70 million tracks. While Pandora catalog in its existence having one to two million songs making it hard to prevail Spotify. Only Apple Music has managed to overcome Spotify on this aspect with other competitors still struggling with a little degree of success. Spotify Premium also boasts of a wide range of remixes and covers which you can never find in Pandora Premium. However, both Spotify and Pandora Premium music library are comparable even though the fact remains Spotify holds the lead.h the fact remains Spotify holds the lead.)
• Make Collaborative Playlists on Spotify  + (Step 1. In the left panel, right-click a playlist you wish to open. Step 2. Select 'Collaborative Playlist'. Step 3. Right-click on the playlist again, then scroll down to 'Share'. Step 4. Choose 'Copy Playlist Link' then send it to your friends.)
• Refreshing Oxalis Kvas  + (Step 3: Boil then some water and pour it into the pot with herbs.)
• How to create a 3D sculpture  + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
• How to create a 3D sculpture  + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
• EMI probe 12+ activities  + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
• PiKon telescope  + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
• Fruit piano  + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
• Fruit piano  + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
• Buzzing Bee Circuit  + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
  created file to the printer. PRINT! <br/>)
• How to Download Spotify to MP3 in 320kbps High Quality  + (The best Spotify to MP3 320kbps downloader … The best Spotify to MP3 320kbps downloader is the [https://www.audkit.com/spotilab-music-converter.html AudKit Spotify Music Converter]. It can download '''any audio content''' including songs, playlists, podcasts, albums, and audiobooks from Spotify to '''MP3, AAC, M4A, M4B, FLAC, and WAV''' at '''5X''' '''in batches'''. It allows '''all Spotify users''' including those free users to download Spotify music '''without Spotify Premium'''. You don't need to worry about the audio quality since it can retain '''100% lossless sound quality''' and '''full ID3 tags''' (i.e., title, artist, cover, year). This great tool also endows you with the ability to change the output quality parameters such as the '''bit rate, sample rate, channel''', and the like. Before using it, please go to the [https://www.audkit.com/ AudKit.com] to install this powerful downloader on your '''Windows PC or MacBook'''.oader on your '''Windows PC or MacBook'''.)
• DIY Makey Makey with Arduino Leonardo  + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
• Arduino to ThingSpeak via SIM800 No Wi-Fi  + (The legacy project documents that were ori … The legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
• How to Get Spotify Mini Player on Windows and Mac  + (The official Spotify desktop app doesn’t o … The official Spotify desktop app doesn’t offer a mini player, but you can get it on your computer in several ways, here’s how. = 1. Get Spotify Mini Player on Chrome = Chrome is not only a mighty web browser, but also can be a great Spotify music player. Spotify provides web player for both free and Premium to access Spotify music which is way easier than installing the desktop app. And you can get a mini player on web player. '''1.''' Open Chrome and type in ''open.spotify.com'' to get Spotify web player. '''2.''' Sign in your Spotify account and play a song, then click on the mini player icon next to the album art to open Spotify mini player. '''3.''' A small window with the album art will pop up and be pinned to the front of the screen. You can play, pause or skip through songs using this mini player. = 2. Lofi Spotify Mini Player = Lofi is a compact desktop client that can play Spotify songs with a window that only takes up 150X150 pixels of the screen. Go to ''lofi.rocks'' to download the app and log in with your Spotify account. Then you can play, stop, skip forwards and backwards in its tiny interface displays with album artwork. It also creates visualizations, you can choose one among Blue Wave, Rainbow Road, String Theory and seascape. Rainbow Road, String Theory and seascape.)
• OpenKnit: digital fabrication tool to create your own clothes  + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
• Ultimate Guide to Fix Tidal Not Playing Songs  + (The tidal app for music streaming is now a … The tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
• How to Play Spotify on Yoto Player  + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
• Geiger counter  + (This is a timelapse of the assembly process of the geiger counter)
• Node Red with MQTT on Raspberry Pi  + (This project works without much additional hardware. The one and only requirement is you just need a Raspberry Pi.)
• 8bits & Chocolate - decorative candy dispenser  + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
• Hướng Dẫn Các Thao Tác Cơ Bản Tại Nhà Cái Uy Tín Kuwin  + (Thuật ngữ cá độ bóng đá không chỉ giúp ngư … Thuật ngữ cá độ bóng đá không chỉ giúp người chơi nhanh chóng hiểu được luật chơi, mà còn tránh được nhiều rủi ro không đáng có. Tuy nhiên, thuật ngữ là những cụm từ trừu tượng, khiến nhiều anh em tò mò. Trong bài viết này, hãy cùng [https://kuwin.city/ Kuwin] những thuật ngữ trong làng giải trí hiện nay nhé!huật ngữ trong làng giải trí hiện nay nhé!)
• How to Listen to Tidal on Multiple Devices Simultaneously  + (Tidal offers several major plans for you t … Tidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month. # If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days. # If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus. # To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family. # After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
  '' from Family Hi-Fi or Hi-Fi Plus. <br/>)
• How to Play Tidal on Galaxy Watch  + (To begin using Tidal on your Galaxy Watch, … To begin using Tidal on your Galaxy Watch, you'll need to download and install the Tidal app. Follow these steps to get started: '''Step 1: Open the Galaxy Wearable App''' First, open the Galaxy Wearable app on your smartphone. This app allows you to manage and install applications on your Galaxy Watch. '''Step 2: Find and Install the Tidal App''' In the Galaxy Wearable app, navigate to the "Galaxy Store" section. Search for the Tidal app using the search bar and select it from the search results. Tap on "Install" to begin the installation process. '''Step 3: Sign in to your Tidal Account''' Once the Tidal app is installed on your Galaxy Watch, open it, and sign in using your Tidal account credentials. If you don't have a Tidal account yet, you can create one directly from the app.
  n create one directly from the app. <br/>)
• Snap circuits activities for 12+  + (To begin with, kids will need to build or … To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
• Timelapes with Raspberry Pi Camera  + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
• Bateau pirate en carton  + (Tout d'abord, assurer vous d'avoir un gros carton solide. J'ai ajouter des extension pour faire tenir l'arrière du bateau, mais il me semble que c'est optionnel. Fixez bien l'ensemble, les deux boites entre elles, puis les boîtes au gros carton.)
• Bateau pirate en carton  + (Tout d'abord, assurer vous d'avoir un gros carton solide. J'ai ajouter des extension pour faire tenir l'arrière du bateau, mais il me semble que c'est optionnel. Fixez bien l'ensemble, les deux boites entre elles, puis les boîtes au gros carton.)
• Applique abat-jour avec lampe murale à la découpe laser  + (Tout d'abord, j'ai choisi sur Wikifab, le tutoriel [[Applique Abat-Jour Mural Volcano]])
• Broken toilet  + (Turn the nut counterclockwise to remove the nuts from the seat.)
• ShadeBox  + (Choisir la carte ESP32 (Outils -> Type … Choisir la carte ESP32 (Outils -> Type de carte -> ESP32 Module). Télécharger le code à l'adresse suivante : [https://l.facebook.com/l.php?u=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0&h=ATOeyxhqj3OFVRNEAhPL5HtK39aj6nEVcym_XhnVPXHsVbJk1ukNCBXbPrnILPPdc8umjD1T75uPT22SuKkK9BkLMSQgAiXRqSe6S9H8UXOYCe0JtDBEDs07jXVp1Kh7sEthh7Bl9Y4ygfnehQA4PcBKQZc drive.google.com/open?id=1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0]. Téléverser le code fourni sur la ESP3. Si ça ne marche pas, vérifier que le bon port série soit affecter (Outils -> Ports série).on port série soit affecter (Outils -> Ports série).)
• ShadeBox  + (Choisir la carte ESP32 (Outils -> Type … Choisir la carte ESP32 (Outils -> Type de carte -> ESP32 Module). Télécharger le code à l'adresse suivante : [https://l.facebook.com/l.php?u=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0&h=ATOeyxhqj3OFVRNEAhPL5HtK39aj6nEVcym_XhnVPXHsVbJk1ukNCBXbPrnILPPdc8umjD1T75uPT22SuKkK9BkLMSQgAiXRqSe6S9H8UXOYCe0JtDBEDs07jXVp1Kh7sEthh7Bl9Y4ygfnehQA4PcBKQZc drive.google.com/open?id=1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0]. Téléverser le code fourni sur la ESP3. Si ça ne marche pas, vérifier que le bon port série soit affecter (Outils -> Ports série).on port série soit affecter (Outils -> Ports série).)
• Conception Mécanique Assistée par Ordinateur (CMAO)  + ([https://fr.wikipedia.org/wiki/Mod%C3%A9li … [https://fr.wikipedia.org/wiki/Mod%C3%A9lisation_cin%C3%A9matique_des_m%C3%A9canismes Liaisons cinématiques] : * Nulle ou libre * Complète ou encastrement * Pivot * Glissière * Appui plan ou plan/plan * Pivot glissant ou cylindre/cylindre * Rotule, sphérique ou sphère/sphère * Linéaire annulaire ou sphère/cylindre * Linéaire rectiligne ou cylindre/plan * Ponctuelle ou sphère/plan * Hélicoïdale * Rotule à doigtsphère/plan * Hélicoïdale * Rotule à doigt)
• Capteur BioData pour ESP32  + (Avant tout, veuillez noter que les connexi … Avant tout, veuillez noter que les connexions de la plaque d'essai sont identifiées par des chiffres et des lettres. Les colonnes sur le coté sont également identifiées '''+''' et '''-''' Positionnez ensuite le composant 555 sur la plaque de test en respectant la position du 555 sur la plaque d'essais. Attention au sens du 555, la petite marque ronde sur le composant doit être vers le haut.
  e composant doit être vers le haut. <br/>)
• Capteur BioData pour ESP32  + (Un fil noir entre '''a2''' et la ligne de masse. Un fil rouge entre '''a5''' et la ligne '''+5V.''')
• How to Use Spotify as an Alarm on iPhone, Android, and Smart Speakers  + (Unfortunately, the default Clock app on iP … Unfortunately, the default Clock app on iPhones does not integration with Spotify. However, you can use third-party alarm apps such as Music Alarm Clock for Spotify+ or Kello Alarm Clock to set Spotify songs as your alarm. Here's how: '''Step 1.''' Install and launch the Music Alarm Clock for Spotify+ app or Kello Alarm Clock app on your iPhone. '''Step 2.''' Sign in with your Spotify account on those alarm app and open the app settings. '''Step 3.''' Create a new alarm by tapping the Add button and setting a specific alarm time. '''Step 4.''' Select the alarm sound and choose Spotify as the source. Browse and add your preferred Spotify songs or playlists as the alarm sound. '''Step 5.''' Save the settings, and your alarm will wake you with Spotify songs.ur alarm will wake you with Spotify songs.)
• Glowing LED Butterfly  + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Fabriquer une télécommande pour reflex/fr  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Candy machine to counter addiction  + (We maken de snoepmachine met een lasercutt … We maken de snoepmachine met een lasercutter. Neem hiervoor contact met een lokaal fablab. Lasercut het eerste bestand (candy_machine_3mm_laser_V3) en het laatste bestand (top_cover_snoepmachine) uit 3mm multiplex hout. Lasercut het tweede bestand (candy_machine_3mm_laser_plexy) uit 3mm plexy. Opgepast! Snij enkel uit plexy. Andere materialen zoals pvc geven giftige roken af. Test of alle onderdelen goed passen.af. Test of alle onderdelen goed passen.)
• Light sensitive e-textile bag  + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
• Light sensitive e-textile bag  + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
• Empty room activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
• Brightness control activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• How to Add Subtitles to YouTube Video  + (With [https://www.joyoshare.com/video-join … With [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] downloaded and installed on your desktop, double-click to launch it. At the bottom left, click the "Open File" to browse your local file and select the target YouTube video. You can also drag your video to its interface quickly and simply.video to its interface quickly and simply.)
• How to Play Spotify While Playing Roblox  + (With a few simple steps, you can now enjoy your favorite tunes from Spotify while immersing yourself in the world of Roblox, whether on mobile or PC.)
• How to Save Spotify Music Tracks without a Premium  + (You can convert Spotify songs using either the Web player mode or the App mode.)
• SunZilla - Guide 5: Assembling solar panels frames  + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
• Node Red Controlled Neo Pixel on Raspberry Pi 4  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• AWS IoT Core IoT Platform Series - 6  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Ethernet-Enhanced LoRa Gateway Minimizing Delay  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Temperature Control Neo Pixels with Arduino Nano  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here]. Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Node Red with Raspberry Pi  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Neo Pixels Ring with Arduino Nano  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here. U]sing this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Getting Started with TivaWare Launchpad - Basics  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• DHT11 with ESPNOW  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] toget them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• M5Stick C Captive Portal  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node Red Controlled Web LED on ESP32 with Raspberry Pi 4  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
• Line Follower Robot - King of Maze  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node-Red Telegram Bot with Temperature Logger Part-2  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Minetest and 3D scanning  + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
• Minetest and 3D scanning  + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
• ESP32 DHT22 IFTTT  + (You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny: *Go to https://thonny.org/ *Download *Install and then open)
• Adjustable Temperature Control Cheap T12 Soldering Iron  + ([https://www.youtube.com/watch?v=N4z2Y4gvmio Youtube Test Video])
• Etage jardinière  + (fichiers -         La jardinière dans laquelle on placera la plante -         Le 4^ème étage, dans lequel on installera le servo-moteur)
• Etage jardinière  + (fichiers -         La jardinière dans laquelle on placera la plante -         Le 4^ème étage, dans lequel on installera le servo-moteur)
• Etui à lunette en bois personnalisé  + (je suis allé sur [https://www.festi.info/ … je suis allé sur [https://www.festi.info/boxes.py/ Boxes.py] pour choisir la boite qui deviendra l'étui à lunette. Quand vous arrivé sur le site choisissait la premier boite flexible de la liste. Quand vous avait réglé tout les paramètre à votre convenance appuyé sur généré. ensuite le site vous ouvrira une nouvelle page avec tout les morceaux de la boite à plat. Faite un clique droit puis enregistré sous pour pouvoir télécharge le fichier de votre boite sous format svg.le fichier de votre boite sous format svg.)
• BENTORAMIDE  + (Test de la Bentolux en conditions réels et présentation de l' objet final.)
• Astuce (s) pour plotter  + (ouvrir votre fichier pdf avec open office ou world faire un Ctrl A puis un CTRL C puis un clic pour désactiver le A)
• Anèmomètre  + (utiliser les fichiers STL https://gitlab.com/norbertwalter67/Windsensor_WiFi_1000/-/tree/master/CAD-Files/3D-Parts/STL?ref_type=heads)
• Jeu de dames et d'échecs  + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau)
  Dans l'ordre découpe intérieure puis extérieure = RVB (Oui on avait fait l'inverse avant de se poser les bonnes questions et de changer...)
  '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)'''''
  Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !
  ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
• Jeu de dames et d'échecs  + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau)
  Dans l'ordre découpe intérieure puis extérieure = RVB (Oui on avait fait l'inverse avant de se poser les bonnes questions et de changer...)
  '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)'''''
  Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !
  ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
• Best Amazon Music Converter in 2021 Is Here  + (“Our Audio Capture also enables users to r … “Our Audio Capture also enables users to rip Amazon Music to common audio tracks. But it's a little complicated to operate as it works on any sound playing on the computer. Therefore, there are more and more customers who feedback that they need a customized Amazon Music Converter,” Charles David said, the product manager of AudFree Software. “Under this circumstance, with the hardworking of our professional engineers, AudFree Amazon Music Converter is created and developed successfully, which can automatically detect and split songs, and realize batch addition and conversion,” added he. batch addition and conversion,” added he.)

• Candy machine to counter addiction  + (Lijm de onderkant vast met houtlijm. Nee … Lijm de onderkant vast met houtlijm. Neem een oude fietsband en knip er een stuk uit dat even lang is als het bovenste onderdeel (de klep). Knip de fietsband open en plak deze met dubbelzijdige plakband op de klep en op de achterkant van de snoepmachine. Zo heb je een scharnier. Test of de snoepmachine blijft staan en of de klep open en toe kan.lijft staan en of de klep open en toe kan.)

• Petit bras robotique  + (Dans mBlock ouvrez un nouveau dossier. N'o … Dans mBlock ouvrez un nouveau dossier. N'oubliez pas les étapes : - connecter le câble usb après branchement - connecter > usb - téléverser le microporgramme - cliquer le drapeau vert Pour ceci on cré une variable, position. Changez la variable quand on presse la flèche droite. De combien de degrés est-ce qu'on peut changer la position du moteur ?ce qu'on peut changer la position du moteur ?)
• Découpe laser 60w - Modèle rouge chinois  + ( * Ouvrir RdWorks )
• PP Sheetpress  + (====Tools==== same as above ====Parts==== … ====Tools==== same as above ====Parts==== 36 corner brackets ====Steps==== # Prepare your parts. Each "cell" will require 4 brackets, 16 M8Bolts, and 16 washers # Starting with the 4 corners of the ''entire assembly'', attach the corner brackets and tighten the bolts only to finger-tight. # Next attach the 920 beam ends to the outer perimeter. # Next, attach the inner beams in place. Ensure that all beams are equally spaced. (remember that the 2 interior beams are shorter though)
  interior beams are shorter though) <br/>)
• Virtual Fence - Anti Theft Device  + (<nowiki>A Fence is a physical bounda … A Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located.
  
  This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''
  
  
  The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.
  
  But before we get started -e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
• 3D CAM sous Fusion 360  + (<nowiki>Avant de commencer la progra … Avant de commencer la programmation du CAM, considérez votre pièce et la meilleure approche pour l'usiner. Ces décisions dépendent de la forme du modèle, des matériaux, et des contraintes de la machine CNC que vous utilisez. Dans cette étape, vous apprendrez comment ces facteurs impactent votre stratégie d'usinage en ce qui concerne la fixation (workholding), le référencement (registration, c'est-à-dire s'assurer que la CNC sache où se trouve la pièce, et les paramètres du CAM.
  
  Chemins d'outil 3D
  
  Dans un toolpath 2D (poche, contour, tracé, ...), la tête de la fraise reste à une profondeur fixe (axe Z) durant une passe d'usinage, et ne bouge que dans les directions X et Y pendant qu'elle coupe. Ce type d'usinage est idéal pour des pièces prismatiques, pour lesquelles toutes les faces usinées sont perpendiculaires à l'axe de la broche de la machine.
  
  Lors de la programmation de pièces non prismatiques, telles que des moules ou des formes organiques, les opérations 2D sont insuffisantes. Vous devez utiliser des opérations de CAM 3D, dans lesquelles la fraise se déplace de manière dynamique selon X, Y et Z.
  
  Serrage
  
  Le serrage (workholding) est la stratégie pour maintenir votre pièce de manière rigide pendant le processus d'usinage. Lors de la programmation avec des parcours d'outil 3D, la mise en oeuvre est une considération initiale importante. Cela est particulièrement vrai pour les pièces qui nécessitent un usinage des deux côtés, lorsque la pièce sera basculée entre les ''setups''. (programmes d'usinage)
  
  Pour la programmation de pièces prismatiques,où les CAM 2D et 2.5D requièrent uniquement un modèle de CAO de la pièce que vous souhaitez usiner, aucune fonctionnalité supplémentaire n'est présente pour la fixation ou le référencement . En effet, la pièce prend la forme d'un prisme rectangulaire, qui peut être facilement maintenu dans un étau ou fixé au martyr.
  
  Mais que faites-vous lorsque votre forme est plus organique ou irrégulière, et doit également être retournée à la machine des deux côtés? Dans ce cas, vous devez créer un matériau supplémentaire qui maintiendra votre pièce dans un étau, contre le martyr ou à plat contre le bas de la machine. Il est très difficile de programmer le CAM sans avoir ces fonctionnalités intégrées dans votre modèle.
  
  En d’autres termes, l’usinage 3D avec retournement nécessite que vous modélisiez la matière que vous souhaitez laisser ainsi que des onglets pour éviter que votre pièce ne se détache dans la machine. Ces onglets seront coupés et poncés après l'usinage, généralement avec une scie à ruban et une ponceuse à disque.
  
  Pour votre cuillère de service, vous aurez deux onglets - un à chaque extrémité - et un prisme rectangulaire qui tiendra la cuillère à plat après le retournement. Lors de la modélisation, il est préférable de créer ces suppléments en tant que corps (bodies) distincts de la pièce à usiner.
  
  Référencement
  
  Étant donné que la cuillère sera usinée des deux côtés (usinage par retournement), vous devez vous assurer que la machine à commande numérique peut localiser la pièce avec précision après son déplacement. Ceci s'appelle l'enregistrement.
  
  Si vous avez déjà utilisé Haas, vous savez utiliser une sonde pour localiser votre pièce. Cependant, comme beaucoup de routeurs de table, le DMS n’a pas de sonde. Lorsque vous utilisez le DMS pour localiser l’origine de votre système de coordonnées de travail (Work Home), vous insérez un outil dans la broche et vous le positionnez au bon endroit. Il est courant de coincer un morceau de papier entre le support et l’outil pour s’assurer que Z est correct. Dans la classe des machines DMS, vous apprendrez à saisir les codes pour configurer votre WCS de cette manière. Comme vous pouvez l’imaginer, ce système n’est pas précis, car vous ne faites que "regarder les yeux" de cet endroit.
  
  Cela implique de devoir considérer une manière d'aligner les deux côtés de la pièces précisément si elle doit s'usiner des deux côtés. Il y a plusieurs méthodes possibles, chacune avec ses avantages et ses inconvénients qui dépendent de la spécificité de la pièce à usiner. Parmi les méthodes les plus courantes: - Attacher des butées sur le martyr ou le lit de la fraiseuse, où ira se caler la pièce usinée. - Usiner un contour dans le martyr, pour ensuite placer la pièce à l'intérieur en serrage - forer des trous pouvant accueillir des "pins" en bois, dans la pièce à usiner et dans le martyr, pour les solidariser (le plus précis)
  
  La dernière méthode est celle que nous utiliserons pour la cuillère. Lors de l'usinage de la face avant, vous percerez également trois trous à travers le stock et partiellement à travers le martyr. Lors du retournement de la pièce, vous insérerez des tourillons dans ces trous afin d'aligner l'autre face parfaitement avec la première.
  
  Paramétrage du CAM Les spécificités du projet (usinage de bois sur une fraiseuse multi-outils) vont également déterminer certains choix lors de la programmation des chemins d'outil. En l'occurrence, l'usinage du bois ou du platique n'est pas un usinage rapide. Cela autorise l'utilisation de chemins d'outils adaptatifs pour le "dégrossage", mais vous ne pouvez pas utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise. utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise.</nowiki>)
• How to Delete Tidal Account Permanently without Subscription  + (<nowiki>If you are using Apple produ … If you are using Apple products such as iOS devices, you will find a Delete Account option on your iOS Tidal app. Just follow the steps below to close Tidal account permanently.
  
  
  Step 1. Open the Tidal app on your iPhone.
  
  Step 2. Tap the top-right '''gear''' icon from the '''My Collection''' section to go to Tidal '''Settings'''.
  
  Step 3. Scroll down and choose ''''Manage account''''.
  
  Step 4. On the new screen, tap the bottom ''''Delete account'''' option.
  
  
  gt;Step 4. On the new screen, tap the bottom ''''Delete account'''' option.<br /><br /><br/></nowiki>)
• Copier Youtube  + (En France, vous êtes soumis à une taxe qui vous autorise à réaliser des copies Pour un usage privé, vous bénéficiez d'une exception qui vous permet de faire cette copie sans que cela ne soit illégal!!! http://www.procirep.fr/Bases-juridiques.html)
• Copier Youtube  + (En France, vous êtes soumis à une taxe qui vous autorise à réaliser des copies Pour un usage privé, vous bénéficiez d'une exception qui vous permet de faire cette copie sans que cela ne soit illégal!!! http://www.procirep.fr/Bases-juridiques.html)
• Qubitro Device Data - IoT Platform Series  + (<nowiki>To get started with Qubitro, … To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account.
  
  
  Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account. shall automatically be logged in to our account.</nowiki>)
• Water probe 9-11 activities  + (<nowiki>To have a functioning water … To have a functioning water probe, you ll need to upload a specific program onto the arduino uno board.
  
  Here is the sketch you need to upload:
  
  /*
  
  Water Conductivity Monitor
  
  Sketch for an Arduino gadget that measures the electrical
  
  conductivity of water.
  
  This example code is based on example code that is in the public domain.
  
  */
  
  const float ArduinoVoltage = 5.00; // CHANGE THIS FOR 3.3v Arduinos
  
  const float ArduinoResolution = ArduinoVoltage / 1024;
  
  const float resistorValue = 10000.0;
  
  int threshold = 3;
  
  int inputPin = A0;
  
  int ouputPin = A5;
  
  void setup()
  
  {
  
  Serial.begin(9600);
  
  pinMode(ouputPin, OUTPUT);
  
  pinMode(inputPin, INPUT);
  
  }
  
  void loop()
  
  {
  
  int analogValue=0;
  
  int oldAnalogValue=1000;
  
  float returnVoltage=0.0;
  
  float resistance=0.0;
  
  double Siemens;
  
  float TDS=0.0;
  
  while(((oldAnalogValue-analogValue)>threshold)><br />int oldAnalogValue=1000;<br /><br />float returnVoltage=0.0;<br /><br />float resistance=0.0;<br /><br />double Siemens;<br /><br />float TDS=0.0;<br /><br />while(((oldAnalogValue-analogValue)>threshold)</nowiki>)
• Automated Gardening Plant with arduino Uno under the DEEDU project  + (<nowiki>You will need<br />< … You will need
  
  electronic control and command part (listed below)
  
  water tank
  
  a plant in a pot
  
  a box for electronic (https://www.thingiverse.com/thing:4106140)
  
  3d printed light sensor support (https://www.thingiverse.com/thing:3986667)
  
  3d printed sprinkler (https://www.thingiverse.com/thing:3986672)
  
  For the Command & Control part the material used are the following:
  
  - 1 Arduino UNO link
  
  - 1 moisture sensor link
  
  - 1 CO2 Gas sensor Mq7 link
  
  - 1 Lcd screen 2x16 (+i2c)) link
  
  - 1 LDR light sensor (photoresistor) link
  
  - 2 push buttons link
  
  - 1 Temp + humidity sensor DHT11 link
  
  - 1 5V water pump link
  
  - 1 5v relay link
  
  - 3 1k resistor link
  
  - 1 Breadbord or prototyping PCB link
  
  -2 5v power supply linklink<br /><br />- 1 5V water pump link<br /><br />- 1 5v relay link<br /><br />- 3 1k resistor link<br /><br />- 1 Breadbord or prototyping PCB link<br /><br />-2 5v power supply link</nowiki>)
• 3D CNC milling avec CAM Fusion 360  + (<section class="step"><br />Be …
  
  Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.
  
  
  3D Toolpathing
  
  If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.
  
  When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.
  
  
  Workholding
  
  Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.
  
  When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.
  
  But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.
  
  In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.
  
  Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.
  
  For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.
  
  
  Registration
  
  Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.
  
  If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.
  
  This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:
  
  --Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed
  
  --Machining a contour into your spoiler board, then placing your stock exactly inside that contour
  
  --Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)
  
  This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.
  
  
  CAM Settings
  
  The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths.

  
  
-Tool numbering
  
  If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.
  
  Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.
  
  If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.
  
  -Rules for roughing
  
  Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.
  
  When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.
  
  lt;br />Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.<br /><br />When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.<br /></section>)
• Mobile renewable energy platform on a cargo bike  + ('''''charging''''' - input : DC power for … '''''charging''''' - input : DC power for 5 generation bikes power 5*100W - peak 5*200 voltage 48V current 30A '''''conversion and output''''' - output AC : power for an open-air cinéma, projector and active speakers - output DC : power for a 3D printer power 700W voltage 220AC current 1A '''''battery''''' - buffer : DC supercapacitor power 1000W voltage 48V current 30A - peak 40A1000W voltage 48V current 30A - peak 40A)
• Bento Red Room  + ('''3D Printing''' * Filament: PVA and ABS … '''3D Printing''' * Filament: PVA and ABS * Wood '''Electronic''' * 1 Arduino Uno cards * male-male and male-female prototyping cables * LCD SSD1306 128 x 64 * 1 LED 8mm * 2 ring of 12 LEDs * 1 potentiometer * 1 BME280 weather sensor * 1 switch * 1 x 5V power supply * 220 and 10000 Ohms resistors * 3 x servomotors * Buzzer === Tools === '''Machines''' * 3D printer * Découpeur de laser '''Software''' * Tinkercad, Microsoft 3D builder, Blender * Cura Ultimaker * Arduino '''Prototyping''' * soldering iron * cutting pliers * wire stripper * glueon * cutting pliers * wire stripper * glue)
• Bento Night Sky  + ('''3D Printing''' *Filament: PVA and ABS … '''3D Printing''' *Filament: PVA and ABS *Wood '''Electronic ''' *1 Arduino Uno cards *male-male and male-female prototyping cables *LCD SSD1306 128 x 64 *1 LED 8mm *2 ring of 12 LEDs *1 potentiometer *1 BME280 weather sensor *1 switch *1 x 5V power supply *220 and 10000 Ohms resistors *3 x servomotors *Buzzer ===Tools=== '''Machines''' *3D printer *Découpeur de laser '''Software ''' *Tinkercad, Microsoft 3D builder, Blender *Cura Ultimaker *Arduino '''Prototyping''' *soldering iron *cutting pliers *wire stripper *glue iron *cutting pliers *wire stripper *glue)
• Boite aux lettres Connectée ESP8266  + ('''<u>1/ Connexion du node MCU :< … '''1/ Connexion du node MCU :''' sur la platine de prototypage dans le sens de la longueur afin que les rangées de pattes du module ne soient pas connectées. Le Node MCU fonctionne en 3.3V mais les 2 composants utilisés fonctionnent avec 5V. Une PowerBank de 5V alimentera le dispositif. Il conviendra donc de connecter le capteur à ultrason et le player MP3 sur la broche Vin du node MCU afin de bénéficier des 5V en entrée. '''2/ Connexion du capteur :''' Vcc sur Vin de l'ESP Gnd sur Gnd Trig sur D1 Echo sur D2 '''3/ Connexion du player Groove MP3''' Vcc sur Vin Gnd sur Gnd Tx c'est le retour et ici nous ne l'utiliserons pas donc pas connecté Rx sur le Tx de l'ESP mais malheureusement après de nombreux essais infructueux il s'est avéré que les pin Rx et Tx de l'ESP n'étaient pas ceux qui devaient être utilisés. Un rapide coup d'oeil sur la documentation du module permet de voir que plusieurs pin peuvent faire office de Rx et Tx Les broches D7 et D8 de l'ESP font office également de Rx(2) et Tx(2) qui correspondent donc dans l'IDE Arduino aux GPIO 13 et 15 (ce sera important dans le code). Nous connectons donc le Rx du player MP3 à la broche D8 (Tx) de l'ESP afin que celui ci puisse envoyer ses informations. '''4/ Connexion du Jack du HP à l'entrée Jackdu player MP3''' Penser à l'alimentation du HP (power bank double USB) '''5/ Connexion du node au PC pour téléversement du code =) étape 2'''double USB) '''<u>5/ Connexion du node au PC pour téléversement du code =) étape 2</u>''')
• Animatronic Interactif : Le Live  + ('''... Jusqu'à ce que ça marche...''' Ou qu'on abandonne (à un moment, il faut))
• Dispositif de sécurité à enregistrement de zone de tir  + (Afin de valider le principe, j'ai réalisé … Afin de valider le principe, j'ai réalisé une maquette constituée par un "fusil photographique" auquel j'ai adjoint le système de repérage de la ligne de visée (circuit BNO055 + carte Arduino + buzzer). '''Les photos 1 et 2''' montrent les différents éléments de cette maquette: 1) Un smart phone fixé sur le fusil en bois permet d'enregistrer ce que voit et entend le chasseur lors de l'enregistrement et lors de la phase de chasse. L'objectif du smartphone est situé à l'endroit où se trouve l’œil du chasseur. Cet objectif voit le guidon du fusil en même temps que l'endroit précis visé dans le paysage. 2) Le système de repérage inertiel de la ligne de visée se compose - d'un petit circuit imprimé portant l'unité de mesure inertielle BNO055 - d'une carte de contrôle (Arduino UNO) reliée au BNO055 par un petit câble (alimentation + interface I2C). 3) J'ai également ajouté un buzzer à cette carte. Ce buzzer produit tous les signaux sonores nécessaires pour le suivi de l'enregistrement et de la phase de chasse. '''Nota:''' A l'origine j'aurais souhaité allonger la liaison I2C de façon que seul le petit circuit imprimé du BNO055 se trouve fixé au fusil, la carte de contrôle étant logée dans une poche de veste. Malheureusement la liaison I2C supporte mal l'allongement de la liaison. Pour un développement futur il faudrait donc plutôt utiliser la liaison UART du circuit.lutôt utiliser la liaison UART du circuit.)
• How to Share Spotify Song on Snapchat  + ('''''Q: Is there a way to share and at the … '''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
• Sérigraphie avec un pochoir de vinyle  + (L'image que vous choisirez sera en lien di … L'image que vous choisirez sera en lien direct avec la difficulté du projet. Voici quelques facteurs à prendre en considération lorsque vous choisirez l'image à imprimer. Lors de la création de votre image, gardez en tête que nous créons un pochoir: il faudra que l'extérieur soit d'une seule pièce. '''Il est impossible d'avoir une forme dans une autre, car le centre sera perdu.''' Pour écrire cherchez une typographie pour pochoir (Stencil typo). De nombreuses œuvres sont créés pour des pochoirs, n'hésitez pas à vous en inspirer! Assurez-vous de sélectionner une image d'une seule couleur qui pourra être vectorisé à l'étape suivante. pourra être vectorisé à l'étape suivante.)
• Bentolux - ShrekBox  + (Dernière étape : il ne reste plus qu’à ass … Dernière étape : il ne reste plus qu’à assembler tous les éléments de l'étage ShrekBox ! Premièrement il vous faudra visser l’écran de led avec les boulons imprimés en 3D (''cf photos ci-contre''). Dans un second temps, fixez (collez) l'adaptateur qui doit accueillir le haut-parleur, sur l’amplificateur. Enfin, emboîtez (vissez) le haut-parleur sur l'adaptateur (''cf photo ci-contre''). Pour finir, placez les différents éléments dans le dernier étage (''cf photo ci-contre'').
  
  Et maintenant, à vous de jouer...!!!
  
  ns-text"><big><b>Et maintenant, à vous de jouer...!!!</b></big></div> </div><br/>)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• SolarOSE : concentrateur solaire thermique linéaire de fresnel  + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
• SolarOSE : concentrateur solaire thermique linéaire de fresnel  + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
• How to Allow or Block Apple Music Explicit Content  + ('''Step 1.''' Go to '''Settings''' on your … '''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
• How to Create Spotify Codes for Sharing with Others  + ('''Step 1.''' Open the Spotify app and tap … '''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
• Wio WM1110: Quick Start Guide for Seamless Integration  + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
• Sérigraphie par émulsion photographique  + ('''Un écran de sérigraphie''' L'écran est … '''Un écran de sérigraphie''' L'écran est composé d'un tissu tendu sur un cadre de bois ou d'aluminium. J'utiliserai ici un tissu avec du 110 mailles (fil par pouces). Les tissus à mailles élevés (200 - 300) impriment avec plus de précision, mais laissent passer moins d'encre. Les tissus aux mailles de 85 à 150 impriment moins de détails, mais laissent une couche raisonnable d'encre, utile pour créer une impression opaque. '''Une source de lumière (ampoule survoltée ou source de soleil direct)''' '''Une raclette''' '''Du ruban gommé''' '''Une feuille d'acétate transparente''' '''De l'encre de sérigraphie''' Attention a choisir l'encre idéale pour votre projet (Si vous imprimez sur tissu, choisissez une encre pour tissu). '''Un kit d'émulsion photographique''' Ce kit comporte 3 bouteilles (dans l'image je n'ai que les deux bouteilles blanches). Le produit ne dure que 4 mois avant de devoir être jeté, et devra être conservé au réfrigérateur. (voir étape 4: préparer un kit d'émulsion photographique) '''Un accès à un lavabo''' ...Et tout ce qu'il faut pour nettoyer: savon, linge à vaisselle, éponge. '''Une chambre noire''' Une pièce sans fenêtre bien ventilée.'' Une pièce sans fenêtre bien ventilée.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• Découpage Vinyle  + (<div class="icon-instructions caution-i …
  Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
  er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
• Découpage Vinyle  + (<div class="icon-instructions caution-i …
  Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
  er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
• Design your personal logo with Tinkercad  + ( * Open a new document in tinkercad * Sel … * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
• Laser cut Spirograph  + ( * Open a new document in tinkercad * Select view TOP * ''Switch to Orthographic view'' ''Always use Shift plus Right-click to move the workplane.'' ''Use the Mouse-wheel to zoom-in zoom-out.'' )
• Boîte Noire  + ( * Le circuit que vous souhaitez faire dev … * Le circuit que vous souhaitez faire deviner par l'étude du signal de sorti peut être n'importe quoi ! Soyez créatif ! * Comme premier test nous allons faire un simple circuit RC, sois un passe-bas. * Souder les deux composants en série entre eux sur une plaque. * Avec des cables électriques, liez le circuit aux connecteurs d'entré et de sorti. Je conseille d'utiliser des BNC pour facilement se brancher à un générateur de fonction et un oscilloscope. Sinon, on se contentera de l'extrémité des fils électriques. entera de l'extrémité des fils électriques. )
• Open Workshop Setup  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Open Workshop Setup  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Open Workshop Setup/de  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Verser vos travaux dans le bien commun de l'humanité  + (Rendues célèbres par wikipedia, un des sit … Rendues célèbres par wikipedia, un des sites les plus consultés dans le monde, ces licences permettent rapidement et facilement de partager vos travaux, fichiers, modes d'emplois dans le bien commun. Pour cela, nous vous proposons de comprendre les licences proposées sur ce site, et les sigles correspondants : *'''CC''' = '''Creative Commons''' - mise dans le bien commun *'''BY'''='''Mention obligatoire du ou des auteurs''' (BY) *'''SA'''= '''Share Alike''' - réutilisation avec mêmes conditions de partage pour les copies et variantes et "adaptations" *'''NC'''=comme '''Non Commercial'''. Interdit l'usage commercial de la création. Permet par contre la conclusion de contrats de cession de droits au bénéfice des auteurs pour activer ces usages, tout en laissant le contenu partagé. *'''ND'''='''Non Derivative'''. Interdit la création de variantes et adaptations : et donc la création ne peut faire l'objet d'adaptations sans accord de l'auteur. Il existe aussi ici un [https://creativecommons.org/choose/?lang=fr outil en ligne d'affectation de licences creative commons] qui va vous indiquer la licence qui correspond à ce que vous avez choisi.
  rrespond à ce que vous avez choisi. <br/>)
• Tree planting (Aranya Agricultural Alternatives method)  + ( #If you use a bottle-irrigation system: # … #If you use a bottle-irrigation system: ##Loosen the cap to open the bottle-irrigation system, ##As you add water in the bottle, measure the amount of water added in the bottle-irrigation system: ###If the bottle was empty, increase the frequency of your examinations, ###If the bottle was not empty, reduce the frequency of your examinations; ##Tighten the cap to close the bottle-irrigation system; #If you use a clay-pot-irrigation system: ##Remove the clay plate from the clay pot to open the clay-pot-irrigation system, ##As you add water in the clay pot, measure the amount of water added in the clay-pot-irrigation system: ###If the clay pot was empty, increase the frequency of your examinations, ###If the clay pot was not empty, reduce the frequency of your examinations; ##Install the clay plate on the clay pot to close the clay-pot-irrigation system: #Else: ##If the moisture level is low, add water and increase the frequency of your examinations, ##If the moisture level is high, reduce the frequency of your examinations. reduce the frequency of your examinations. )
• Tree planting (Aranya Agricultural Alternatives method)  + ( *Define the plantation zone, *Make sure t … *Define the plantation zone, *Make sure that your sapling is ready for transplantation, *Make sure that weather conditions will be favorable for the young tree to grow (avoid dry season peak), *If applicable, [[Clay-pot-irrigation system (Aranya Agricultural Alternatives method)|build your clay-pot irrigation system]], *If applicable, [[Tree planting preparation (Sadhana Forest method)|build your bottle-irrigation system]]. Feel free to adapt the procedure to your environment. to adapt the procedure to your environment. )
• Quidditch de Table  + ( *Une fois que vous êtes satisfait avec le … *Une fois que vous êtes satisfait avec les tests et les réglages de la découpeuse, lancez la découpe des pièces du jeu. *Commencez avec la MDF en découpant les pièces du fichier "Pièces Quidditch MDF". *Répétez l'opération, mais cette fois pour le Plexiglas et le plan "Pièces Quidditch Plexiglas". as et le plan "Pièces Quidditch Plexiglas". )
• Plotter de découpe - Caméo Silouhette  + (Préparation de la machine : * Allumage : le bouton situé à droite de la Caméo)
• RainMan 5  + (1) A l'aide du tournevis plat, vissez le m … 1) A l'aide du tournevis plat, vissez le moteur sur la plaque de bois. 2) Assemblez la plaque avec le moteur et le socle en liège avec les autres plaques. Placez la plaque du moteur en haut, veillez bien à ce que le socle en liège soit en haut. Assemblez-la avec deux autres plaques en plastique placées sur les côtés. Puis finissez avec la plaque du bas. 3) Afin de tout solidifier, fixez le tout avec de la colle et du scotch.xez le tout avec de la colle et du scotch.)
• Batvision : dans la peau d'une chauve-souris  + (Branchez la carte Arduino en USB au PC A l'aide du logiciel ArduinoIDE, uploadez le code "Batvision-v2.ino" dans l'Arduino.)
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Geiger counter 12+  + (<u>https://world-nuclear.org/nuclear … https://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
• Geiger counter 9-11  + (<u>https://world-nuclear.org/nuclear … https://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
• Vai thun cotton 4 chieu  + (= ''''''1. Vải thun thun cotton 4 chiều là … = ''''''1. Vải thun thun cotton 4 chiều là gì?'''''' = ''''''Vải thun cotton 4 chiều''' 100% là loại vải được làm từ sợi bông cotton, trong đó sợi spandex chiếm từ 2 đến 5% trong cấu trúc. Với sự góp mặt của loại sợi này đã tạo nên sự co giãn cho vải. với khả năng co giãn 4 chiều (chiều dọc, ngang và đường chéo), vải được dệt 2 lớp, giúp cho sản phẩm may từ loại vải này có độ đàn hồi tốt và ôm sát cơ thể. Vải thun cotton 4 chiều 100% thường được sử dụng nhiều để may các sản phẩm thời trang. Với tính năng thông thoáng, mềm mại, thấm hút mồ hôi tốt, độ bền và độ bóng cao, vải thun cotton 4 chiều 100% được đánh giá là một trong những loại vải phổ biến và được ưa chuộng nhất trên thị trường.''' = ''''''2. Đặc tính của vải thun cotton 4 chiều'''''' = ''''''Ưu điểm vải thun cotton 4 chiều''' là loại vải mềm mại, có khả năng thấm hút cao và đàn hồi tốt, giúp người mặc cảm giác thoải mái khi vận động và hoạt động. Vải có nhiều đặc tính nổi trội được Thái Bảo chia sẻ dưới đây.''' == ''''''2.1 Mềm mại, tính thấm hút cao'''''' == '''Vải thun cotton 4 chiều là loại vải được làm từ sợi bông, kết hợp một số sợi làm mềm và bóng vải. Điều này giúp mang lại cảm giác mềm mại và thoải mái khi mặc. Đặc biệt, vải thun cotton 4 chiều có tính thấm hút cao, giúp người mặc luôn cảm thấy thoáng mát và khô ráo trong thời gian dài.''' == ''''''2.2 Độ bền cao'''''' == '''Với tính chất co giãn, đàn hồi tốt của vải kết hợp với sợi cotton chắc chắn dệt dưới công nghệ xử lý hiện đại, vải thun cotton 4 chiều có khả năng giữ được hình dáng ban đầu của sản phẩm lâu hơn so với các loại vải khác. Điều này giúp sản phẩm đẹp hơn và sử dụng lâu dài hơn, bền đẹp, đáp ứng tốt nhu cầu của người tiêu dùng.''' == ''''''2.3 Mẫu mã đa dạng'''''' == '''Vải thun cotton 4 chiều có thể được nhuộm màu, dễ dàng in ấn, gia công theo yêu cầu của khách hàng, giúp tạo ra sản phẩm có tính thẩm mỹ cao và độc đáo. Với khả năng in ấn đa dạng, các nhà thiết kế có thể thỏa sức sáng tạo và mang đến những sản phẩm vải thời trang độc đáo và ấn tượng cho người tiêu dùng.''' == ''''''2.4 Đàn hồi tốt'''''' == '''Vải thun cotton 4 chiều có ưu điểm là đàn hồi tốt, có khả năng co giãn và bền bỉ sau nhiều lần giặt. Điều này giúp cho quần áo, đồ bộ bằng vải thun cotton 4 chiều ôm cơ thể một cách thoải mái và giúp người mặc dễ dàng vận động mà không gò bó, khó chịu. Điều này cũng giúp cho quần áo giữ được form dáng ban đầu sau nhiều lần sử dụng.''' == ''''''2.5 Dễ sử dụng và bảo quản'''''' == '''Với đặc tính đàn hồi tốt và độ bền cao, vải thun cotton 4 chiều có thể được sử dụng để may nhiều loại trang phục. Vải thun cotton 4 chiều cũng dễ dàng giặt và làm khô, không bị nhăn, không co rút sau khi giặt nên rất tiện lợi trong việc sử dụng và bảo quản.''' == ''''''2.6 Giá thành'''''' == '''Đúng là một trong những nhược điểm của vải thun cotton 4 chiều là giá thành khá cao hơn so với một số loại vải thun khác. Tuy nhiên, điều này có thể được đền đáp bằng chất lượng và độ bền của sản phẩm. Bên cạnh đó, khi mua sử dụng vải thun cotton 4 chiều, bạn cũng có thể tính toán để sử dụng tối đa vật liệu và tối thiểu hóa lãng phí, giúp tiết kiệm chi phí.''' = ''''''3. Ứng dụng của vải thun thun cotton 4 chiều'''''' = ''''''Ứng dụng vải thun cotton 4 chiều''' là một loại vải thường được sử dụng trong các sản phẩm thời trang. Đặc tính đàn hồi, bền đẹp, chất liệu vải thoải mái và dễ sử dụng nên vải được sử dụng phổ biến trong ngành may mặc.''' = ''''''3.1 Thời trang'''''' = '''Với độ bền cao, đàn hồi tốt và tính thấm hút cao, vải thun cotton 4 chiều là một lựa chọn tuyệt vời cho việc may quần áo thể thao, đồ bơi, quần áo nữ trang trí, quần áo bé trai, bé gái,...''' == ''''''3.2 Đồ lót'''''' == '''Vải thun thun cotton 4 chiều có đặc tính mềm mại, thoáng khí, an toàn cho da, là sự lựa chọn tuyệt vời cho các sản phẩm đồ lót như áo ngực, quần lót và đồ bơi.''' == ''''''3.3 Túi xách, phụ kiện'''''' == '''Túi xách, phụ kiện từ vải thun cotton 4 chiều có thể được thiết kế theo nhiều kiểu dáng, từ túi xách đơn giản cho đến túi xách thời trang, đáp ứng nhu cầu sử dụng của khách hàng từ công việc cho đến đi chơi, du lịch. Túi xách, phụ kiện từ vải thun cotton 4 chiều cũng dễ dàng lau chùi và bảo quản, giúp sản phẩm luôn mới mẻ và bền đẹp trong quá trình sử dụng.''' = ''''''4. Những lưu ý khi sử dụng vải thun thun cotton 4 chiều'''''' = '''Khi sử dụng vải thun thun cotton 4 chiều, bạn cần lưu ý phương pháp giặt, phơi, là và bảo quản vải đúng cách được Thái Bảo chia sẻ dưới đây để bảo vệ sản phẩm và tăng độ bền của vải.''' == ''''''4.1 Giặt vải'''''' == * '''Sử dụng nước lạnh hoặc ấm để giặt, tránh sử dụng nước nóng vì có thể làm co lại sợi vải và làm giảm độ co giãn của vải.''' * '''Không nên sử dụng chất tẩy rửa mạnh hoặc chất tẩy áo có chứa clo, vì nó có thể làm phai màu và làm giảm độ bền của vải.''' * '''Nên giặt sản phẩm bằng tay hoặc giặt ở chế độ giặt nhẹ của máy giặt. Lưu ý không giặt sản phẩm cùng với những sản phẩm khác có thể làm phai màu hoặc gây nhiễm bẩn cho sản phẩm của bạn.''' == ''''''4.2 Phơi vải'''''' == * '''Không sử dụng máy sấy để sấy vải, nên để vải khô tự nhiên hoặc treo nơi thoáng mát.''' * '''Tránh ủi quá nhiều hoặc sử dụng nhiệt độ cao để ủi vải, nên ủi ở nhiệt độ trung bình và ủi ở mặt phẳng của sản phẩm.''' == ''''''4.3 Bảo quản'''''' == '''Khi không sử dụng, nên bảo quản [[Https://vaithungiasi.vn/san-pham/vai-thun-cotton-4-chieu|vải thun cotton 4 chiều]] trong nơi khô ráo, thoáng mát và tránh ánh nắng trực tiếp để giữ được độ bền và màu sắc của vải.''')
• Thermostat control activity v12  + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• Biodigesteur domestique  + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
• Biodigesteur domestique  + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
• PP Extruder Pro  + (==== Tools ==== 1/2" Socket ==== Parts == … ==== Tools ==== 1/2" Socket ==== Parts ==== 2x 1000mm 4080 extrusion 4x 300mm 4040 extrusion 40x t-nuts 22x M8x20 bolts 22x M8 Washers 12x Corner Brackets
  ==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)uts. (as seen in the right two beams in image 3))
• Arc-en-ciel avec Arduino  + (A travers le plastique translucide du DEL, … A travers le plastique translucide du DEL, vous pouvez observer 2 parties distinctes, elles ont chacune leur polarité, anode + et cathode moins. La branche métallique la plus courte est la polarité négative (vers la masse) et la plus longue rejoint la polarité + (source d'alimentation)., cela vous aide visuellement à savoir dans quel sens l'intégrer dans votre circuit.s quel sens l'intégrer dans votre circuit.)
• LoRa Direct  + (If you are a LoRaWAN gateway provider or owner you can update details about your device, coverage and/or add comments for the public)
• CONDEPTION ET REALISATION D'UN FOUR SOLAIRE ECOLOGIQUE  + (Afin de répondre a des besoins de réceptions optimale de l'énergie lumineuse, nous avons opté pour une forme qui épouse les 30° symétriques à l'axe du zénith du soleil ( 12h ).)
• FLAC Joiner to Join FLAC Files in Original Quality  + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
• How to Play Amazon Music on Google Home  + (After downloading and installing of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Converter], double-tap to start it. Next, you will be navigated to the Amazon Music web player. Locate the "Sign In" option to access your Amazon account.)
• How to Burn Spotify Playlist to CD  + (After getting your computer equipped with … After getting your computer equipped with AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Music Downloader], double-click to open it. AudFree establishs intergration with Spotify. So running AudFree Spotify software will start the Spotify app. Search tracks or playlists that you want to burn to CD from Spotify music library. Then, copy the link to paste onto the search box of AudFree and click "+" icon to add Spotify music to AudFree. Alternatively, directly drag and drop.ee. Alternatively, directly drag and drop.)
• Play Tidal Songs on Roku TV  + (After the download and installation of the … After the download and installation of the TuneCable program. Run it and choose a download mode from the main interface. The app mode needs the TIDAL app to run and can save up to Tidal Max (up to 24-bit/192kHz) music at 5x or 1x (for Mac) the speed, while the web player mode works via the built-in Tidal web player and can retain Tidal High (16-bit/44.1kHz) quality music at 10x fast speed. Pick the one you prefer, and sign in to your Tidal Free, HiFi, or HiFi Plus account.ur Tidal Free, HiFi, or HiFi Plus account.)
• Download Spotify Playlist to MP3 - How to  + (After the installation of AudFree [https:/ … After the installation of AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Playlist Converter], double-click to open it. In the meanwhile, the Spotify app will automatically start. Then, copy your favorite playlists to AudFree. There are two ways. 1) Copy the link of Spotify playlist > paste it to the search box of AudFree > click "+" icon to upload; 2) Simply drag and drop Spotify playlist to AudFree's main interface.op Spotify playlist to AudFree's main interface.)
• Tidal Alexa - How to Add Tidal to Alexa  + (After the installation, please double-clic … After the installation, please double-click to start [https://www.audfree.com/tidal-music-converter-win/ AudFree Tidal Music Downloader]. And then, the Tidal app will open automatically. Find Tidal songs that you want to play on Alexa, copy and paste the link of Tidal track in the search bar of AudFree's main interface, and click "+" for loading.main interface, and click "+" for loading.)
• Amazon Music Autoplay - A Seamless Listening Experience  + (Amazon Music Autoplay is a feature designe … Amazon Music Autoplay is a feature designed to keep the music playing continuously, providing an uninterrupted listening experience. With autoplay enabled, Amazon Music will automatically queue up and play similar songs, albums, or playlists once your current track or playlist ends. This feature aims to keep the music going without requiring you to manually select the next song, making it perfect for parties, road trips, or background music during work or chores.or background music during work or chores.)
• Fablab + Lakehub  + (At the group forming stage we decided to b … At the group forming stage we decided to brainstorm on the possible project ideas before splitting. Out of all the ideas around health, the self-testing gadget was decided on. During brainstorming, the challenges in health which we were struggling to get solutions were; teenage pregnancy, More affordable and easily available PPEs for the health providers in the frontline, People Living With Disability, time management in the hospital to enable more patients to be served within the shortest time, real-time billing challengeshortest time, real-time billing challenges)
• Bartop 2 joueurs - Découpe laser  + (Une fois les pièces fraisées, vous pouvez commencer par assembler les deux pièces du dos ensemble par des vis 10mm. Attention toutefois à bien aligner les deux pièces du dos par le bord plat du haut (voir photo).)
• Stick Arcade 2 joueurs - Découpe laser  + (Coupez un total de 2 tasseaux de 19,2cm chacun. Sur chaque extrémité de chaque tasseau, marquez le centre de chaque côté. Munissez-vous de votre visseuse équipée d'une mèche bois de Ø 3mm et faites prétrouez les deux tasseaux aux endroits marqués.)
• Lossless FLAC Splitter to Split FLAC in Original Quality  + (Based on your system, select the proper ve … Based on your system, select the proper version of Joyoshare [https://www.joyoshare.com/video-cutter-win/ audio splitter] to download and install. Then, open the program and go to "Open" to access your local folder and choose the FLAC file to it. Or, you can drag and drop the FLAC audio file to the specified position to start.o file to the specified position to start.)
• Showerloop - Guide 3: Connecting the pipes  + (Basics - heat up your copper pipe with a b … Basics - heat up your copper pipe with a blowtorch. Focus the flame on the areas above and below where you will do the bending so that part doesn’t get hotter and thus weaker than the rest of the steel. Once the copper turns blackish and starts making a cool psychedelic rainbow effect you know the copper is warm enough to begin bending. Turn off the flame and wait a moment. Once the pipe has cooled a little use the pipe bending tool so make an appropriate bend. This is more craft than technical skill and you just have to observe and see how the metal flexes.
  Don’t put too much pressure on one spot, this may result in a distorted pipe. You want to keep the diameter of the inner pipe as even as possible. Use a pipe bending tool.
  r of the inner pipe as even as possible. Use a pipe bending tool.</div> </div>)
• Showerloop - Guide 3: Connecting the pipes  + (Lay out all the filter components onto a surface. Using common sense and a ruler you can centre everything perfectly.)
• ESP32 MQTT  + (<nowiki>Copy the full code into your … Copy the full code into your IDE. Feel free to change things like the text it prints, etc
  
  
  

   1 #include 
   2 #include 
   3 
   4 // WiFi
   5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
   6 const char *password = "xxxxx";  // Enter Wi-Fi password
   7 
   8 // MQTT Broker
   9 const char *mqtt_broker = "broker.emqx.io";
  10 const char *topic = "emqx/esp32";
  11 const char *mqtt_username = "emqx";
  12 const char *mqtt_password = "public";
  13 const int mqtt_port = 1883;
  14 
  15 WiFiClient espClient;
  16 PubSubClient client(espClient);
  17 
  18 void setup() {
  19     // Set software serial baud to 115200;
  20     Serial.begin(115200);
  21     // Connecting to a WiFi network
  22     WiFi.begin(ssid, password);
  23     while (WiFi.status() != WL_CONNECTED) {
  24         delay(500);
  25         Serial.println("Connecting to WiFi..");
  26     }
  27     Serial.println("Connected to the Wi-Fi network");
  28     //connecting to a mqtt broker
  29     client.setServer(mqtt_broker, mqtt_port);
  30     client.setCallback(callback);
  31     while (!client.connected()) {
  32         String client_id = "esp32-client-";
  33         client_id += String(WiFi.macAddress());
  34         Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
  35         if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
  36             Serial.println("Public EMQX MQTT broker connected");
  37         } else {
  38             Serial.print("failed with state ");
  39             Serial.print(client.state());
  40             delay(2000);
  41         }
  42     }
  43     // Publish and subscribe
  44     client.publish(topic, "Hi, I'm ESP32 ^^");
  45     client.subscribe(topic);
  46 }
  47 
  48 void callback(char *topic, byte *payload, unsigned int length) {
  49     Serial.print("Message arrived in topic: ");
  50     Serial.println(topic);
  51     Serial.print("Message:");
  52     for (int i = 0; i < length; i++) {
  53         Serial.print((char) payload[i]);
  54     }
  55     Serial.println();
  56     Serial.println("-----------------------");
  57 }
  58 
  59 void loop() {
  60     client.loop();
  61 }
  

  i">0</span><span class="p">;</span> <span class="n">i</span> <span class="o"><</span> <span class="n">length</span><span class="p">;</span> <span class="n">i</span><span class="o">++</span><span class="p">)</span> <span class="p">{</span><br /><span class="lineno">53 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">print</span><span class="p">((</span><span class="kt">char</span><span class="p">)</span> <span class="n">payload</span><span class="p">[</span><span class="n">i</span><span class="p">]);</span><br /><span class="lineno">54 </span> <span class="p">}</span><br /><span class="lineno">55 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">();</span><br /><span class="lineno">56 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">(</span><span class="s">"-----------------------"</span><span class="p">);</span><br /><span class="lineno">57 </span><span class="p">}</span><br /><span class="lineno">58 </span><br /><span class="lineno">59 </span><span class="kt">void</span> <span class="nf">loop</span><span class="p">()</span> <span class="p">{</span><br /><span class="lineno">60 </span> <span class="n">client</span><span class="p">.</span><span class="n">loop</span><span class="p">();</span><br /><span class="lineno">61 </span><span class="p">}</span><br /></pre></div></nowiki>)
• Water probe 12+ activities  + (Begin by soldering the male pin header str … Begin by soldering the male pin header strip onto the PCB board. You need to cover at least 10 points of the PCB (see figure below). Next, solder the 1kohm resistor to the PCB. We soldered one end to n°6, the other end to n°9. This way, when the PCB will be mounted on the arduino uno board, one end of the resistor will connect to A0, the other one to GND. Next, cut two pieces of electric wire, each about 20 cm long. The length doesn’t really matter, however, longer wires will enable you to distance the arduino board further away from liquids. Solder one end of one wire to one end of the resistor. This will connect to A0 on the board. Solder the other end to n° on the PCB. The latter will then connect with A5 on the arduino uno board. Strip off the other ends of the electric wire you just soldered onto the PCB, and connect them to the top of the binding post. Now cut two short pieces of electric wire (about 10 cm long each), and strip off both ends of each wire. Connect one end of each to the bottom part of the binding post. Curl the other end of each wire. The curly ends are the one which will dive into the liquid.e the one which will dive into the liquid.)
• Casque Godzilla  + (Nécessite un logiciel de retouche 3D - par exemple Microsoft 3D Builder *supprimer le corps par soustraction *creuser la tête avec votre scan 3D ou un volume à la mesure de votre tête *dégager votre champ de vision avec 2 cylindres => fichier 3MF<br/>)
• Eclairage de cave sur batterie 12V  + (On soude l'ensemble des composant sur la c … On soude l'ensemble des composant sur la carte ''protoboard,'' sauf le microcontrôleur ATtiny85 qu'il va falloir programmer. Par contre, on peut souder son support ;) Attention au sens des composants ! * microcontrôleur (en bleu): encoche vers l'extérieur (cf fêche) * LED neopixel :en bleu Din (avec la résistance 1 komh) , rouge 5V et noir GND avec le condensateur 0.1µF (céramique) entre le 5V et GND * les deux autres résitance forme un pont diviseur de tension. attention à leurs emplacements relatifs sous peine de tuer le microcontrôleur!ifs sous peine de tuer le microcontrôleur!)
• Eclairage de cave sur batterie 12V  + (On soude l'ensemble des composant sur la c … On soude l'ensemble des composant sur la carte ''protoboard,'' sauf le microcontrôleur ATtiny85 qu'il va falloir programmer. Par contre, on peut souder son support ;) Attention au sens des composants ! * microcontrôleur (en bleu): encoche vers l'extérieur (cf fêche) * LED neopixel :en bleu Din (avec la résistance 1 komh) , rouge 5V et noir GND avec le condensateur 0.1µF (céramique) entre le 5V et GND * les deux autres résitance forme un pont diviseur de tension. attention à leurs emplacements relatifs sous peine de tuer le microcontrôleur!ifs sous peine de tuer le microcontrôleur!)
• Cadre Lumineux Personnalisable  + (C'est le plus important et c'est ici que vous allez "perdre" le plus de temps. Il faut préparer le dessin et faire attention dans les découpes. (voir ensuite étape suivante pour la boite à encoches)
• Cadre Lumineux Personnalisable  + (C'est le plus important et c'est ici que vous allez "perdre" le plus de temps. Il faut préparer le dessin et faire attention dans les découpes. (voir ensuite étape suivante pour la boite à encoches)
• 8bits & Chocolate - distributeur décoratif de friandises  + (Pour assembler les modules je te conseille de regarder les notices PDF. Tu trouveras une numérotation des pièces et la façon de les assembler correctement (ainsi que quelques astuces).)
• 8bits & Chocolate - distributeur décoratif de friandises  + (Pour assembler les modules je te conseille de regarder les notices PDF. Tu trouveras une numérotation des pièces et la façon de les assembler correctement (ainsi que quelques astuces).)
• Veste clignotants pour cycliste  + (A l'aide d'une craie ou d'un marqueur effa … A l'aide d'une craie ou d'un marqueur effaçable reproduisez votre design sur le vêtement. Utilisez une règle pour vous assurer que tout est droit et symétrique. Utilisez du scotch double face pour fixer temporairement les composants à votre vêtement. Cela vous donnera une bonne idée de ce à quoi ressemblera votre produit fini. Le scotch sert aussi à garder tout en place pendant la couture.à garder tout en place pendant la couture.)
• Veste clignotants pour cycliste  + (A l'aide d'une craie ou d'un marqueur effa … A l'aide d'une craie ou d'un marqueur effaçable reproduisez votre design sur le vêtement. Utilisez une règle pour vous assurer que tout est droit et symétrique. Utilisez du scotch double face pour fixer temporairement les composants à votre vêtement. Cela vous donnera une bonne idée de ce à quoi ressemblera votre produit fini. Le scotch sert aussi à garder tout en place pendant la couture.à garder tout en place pendant la couture.)
• Atelier pour Arrosage automatique et autonome  + (Choix notés ce soir: * quel type de pompe … Choix notés ce soir: * quel type de pompe ? (s'assurer qu'elle peut aller jusqu'au bout du mur) * batterie rechargeables ou pas ? * arrosage sur ou sous terre * circuit électronique simple, ou nano, ou nodemcu (rester dans du "standard") * quel panneau solaire? Doit-il pouvoir alimenter le moteur directement, ou faut il passer par des batteries pour avoir assez de puissance? Il y a même des tutos sur des [https://www.electronicshub.org/solar-battery-charger-for-18650/ circuits de recharge utilisant un simple TP4056] connecté au panneau et à la batterie! Est-ce sérieux? (Autre composant apprécié : J5019) Ci-joint un panneau que j'ai, de 12V , 3,5W, 290mA.un panneau que j'ai, de 12V , 3,5W, 290mA.)
• How to Play Spotify through VLC Media Player  + (Click the software icon to launch this too … Click the software icon to launch this tool and Spotify app from your computer desktop. Now, there are two ways to import Spotify playlists to AudFree Software. You can drag and drop Spotify files from Spotify to this program. Or you can copy and paste its URL of Spotify music to AudFree's search box and then press the '+' button to confirm it.d then press the '+' button to confirm it.)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• Connected weather station  + (Connect the sensors as follows: '''Light … Connect the sensors as follows: '''Light sensor''' One end to 3V the other end to the 10kohm resistor which in turn is connected to GND. the same end of the LDR is also connected to pin D34 on the ESP32 '''CJMCU CCS811''' 3V →3V on the ESP32 board GND→ GND SDA→D21 pin on ESP32 SCL→D22 pin on ESP32 WAKE→GND '''DHT11''' GND→GND on ESP32 VCC→3V on ESP32 OUT→D34 on ESP32n ESP32 VCC→3V on ESP32 OUT→D34 on ESP32)
• Table bar à vin en tubes de cuivre  + (Vos verres à pieds doivent s'insérer naturellement dans le meuble :))
• Table bar à vin en tubes de cuivre  + (Vos verres à pieds doivent s'insérer naturellement dans le meuble :))
• Utilisation Ultimaker 2+  + (Cura est ce qu'on appelle un slicer ; c'es … Cura est ce qu'on appelle un slicer ; c'est un logiciel qui sert à "trancher" votre fichier 3D pour que l'imprimante puisse l'imprimer. * Allez sur ce site : https://ultimaker.com/en/products/cura-software * Cliquez sur download for free. * un questionnaire va s'ouvrir vous demandant à quoi va servir Cura, si vous ne voulez pas vous embêter à répondre cliquez sur I don't want to share any information * une fois le logiciel téléchargé, lancez l'instalation logiciel téléchargé, lancez l'instalation)
• Fibonacci Clock  + (Cut 4 plywood board for outside walls, 2 o … Cut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
• SolarOSE - Guide 3: Support structure of the receiver  + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
• SolarOSE - Guide 3: Support structure of the receiver  + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
• SunZilla - Guide 1: Preparing the aluminium profiles  + (Cut the aluminum profiles according to the technical drawings in the attached PDFs. Once you have them in hand, the first step is to file the ends of the profiles to deburr them, as shown in the picture.)