Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Recherche par propriété

Une liste de toutes les pages qui ont la propriété « Step Content » avec la valeur « Una volta installate le tavolozze, puoi importare il codice che trovi allegato a questo passaggio per creare il flusso. Basta fare clic sul menu (in alto a destra) -> importa -> dagli Appunti. Quindi, nella finestra seguente, incolla il codice copiato dal file allegato qui. Ora è il momento di inserire i tuoi dati personali. In particolare, è necessario inserire il token di autorizzazione nei blocchi "DEEDU1" e "DEEDU2", modificando il parametro "InsertYourTokenHere". Al termine, fare clic su Distribuisci. In caso di problemi, è possibile scaricare un'immagine ISO qui. Fai attenzione, perché deve essere personalizzato inserendo il token blynk generato sul tuo smartphone. ». Puisqu’il n’y a que quelques résultats, les valeurs proches sont également affichées.

Affichage de 101 résultats à partir du n°1.

Voir (200 précédentes | 200 suivantes) (20 | 50 | 100 | 250 | 500).


    

Liste de résultats

  • IoT with ESP32 board  + (Once you have set up an account on adafruit.io, go ahead creating a new Feed. Creat a new feed and name it, for example "lightsensorvalue".)
  • Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
  • Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
  • How to Put Music on MP3 Player from Spotify  + (Open AudFree [https://www.audfree.com/spotOpen AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Music Converter] and the Spotify app will load automatically. Find Spotify songs that you want to put on MP3 player. Then, drag them to AudFree's main interface. Or, you can copy the track link and paste it in the search bar. Next, click "+" icon.t in the search bar. Next, click "+" icon.)
  • Tidal Discord - How to Link Tidal to Discord  + (Open AudFree [https://www.audfree.com/tidaOpen AudFree [https://www.audfree.com/tidable-music-converter/ Tidal Converter] and at the same time Tidal app will automatically start. Search Tidal songs that you want to play through Discord from Tidal. Then, copy the corresponding link and paste it in the search field of AudFree's main interface. Simply click the "+" icon to load Tidal music.ly click the "+" icon to load Tidal music.)
  • Enjoy Free Apple Music Forever in 2021  + (Open iTunes on your computer and then choose Music.)
  • Design for lasercut with Makercase  + (Open the website [http://www.makercase.comOpen the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
  • Design for lasercut with Makercase  + (Open the website [http://www.makercase.comOpen the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
  • Réalisation d'une pièce en 3D avec la fraiseuse numérique  + (Si votre programme comprend l'utilisation Si votre programme comprend l'utilisation de plusieurs outils différents, la machine passera en mode changement manuel d'outils entre chaque opération. Broche éteinte, la machine rejoindra son origine. Vous pourrez alors changer la fraise en respectant les consignes de l'étape précédente. Une fois la fraise changée, vous pourrez sélectionner "Tool Changed" dans le menu apparu sur le boitier de commande et appuyer sur "OK". L'usinage reprendra son cours jusqu'au prochain changement d'outil.
    squ'au prochain changement d'outil. <br/>)
  • Réalisation d'une pièce en 3D avec la fraiseuse numérique  + (Si votre programme comprend l'utilisation Si votre programme comprend l'utilisation de plusieurs outils différents, la machine passera en mode changement manuel d'outils entre chaque opération. Broche éteinte, la machine rejoindra son origine. Vous pourrez alors changer la fraise en respectant les consignes de l'étape précédente. Une fois la fraise changée, vous pourrez sélectionner "Tool Changed" dans le menu apparu sur le boitier de commande et appuyer sur "OK". L'usinage reprendra son cours jusqu'au prochain changement d'outil.
    squ'au prochain changement d'outil. <br/>)
  • Découper au laser une modélisation sketchup  + (Avant d'enregistrer votre travail, il faut repositionner votre patron dans la feuille grâce aux deux outils de translation et de rotation du patron.)
  • Découper au laser une modélisation sketchup  + (Ouvrir le fichier "maison.DAE")
  • Montaje de P3steel por HTA3D - Tutorial 9 - Calibrar desfase de las boquillas para Dual  + (Una vez al tengamos impresa, comprobamos qUna vez al tengamos impresa, comprobamos que: #Las dos líneas más largas del eje X coincidan. #Las dos líneas más largas del eje Y coincidan. Además, encontramos otros indicadores de calibración en: *Cubo: En el caso de que la segunda boquilla no esté nivelada en altura respecto a la primera encontraríamos desfases o solapamientos en las líneas horizontales de unión de ambos colores. En las verticales podemos ver el desfase en X e Y. *Cuadrados concéntricos: desfases en X e Y.Cuadrados concéntricos: desfases en X e Y.)
  • Montaje de P3steel por HTA3D - Tutorial 9 - Calibrar desfase de las boquillas para Dual  + (Una vez al tengamos impresa, comprobamos qUna vez al tengamos impresa, comprobamos que: #Las dos líneas más largas del eje X coincidan. #Las dos líneas más largas del eje Y coincidan. Además, encontramos otros indicadores de calibración en: *Cubo: En el caso de que la segunda boquilla no esté nivelada en altura respecto a la primera encontraríamos desfases o solapamientos en las líneas horizontales de unión de ambos colores. En las verticales podemos ver el desfase en X e Y. *Cuadrados concéntricos: desfases en X e Y.Cuadrados concéntricos: desfases en X e Y.)
  • 3D copa menstrual  + (Patente de la copa menstrual 1867 No necesito copiar lo que encuentro en Wikipedia. https://fr.wikipedia.org/wiki/Coupe_menstruelle)
  • Charger-Décharger Filament sur Ultimaker 3  + (Le filament va se retirer tout seul. Assurez-vous de bien enrouler sur la bobine (sans faire de noeud).)
  • Charger-Décharger Filament sur Ultimaker 3  + (Le filament va se retirer tout seul. Assurez-vous de bien enrouler sur la bobine (sans faire de noeud).)
  • Best GIF Combiner to Combine GIFs into One  + (Please download and install [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] on your computer first. Next, you need to drag your GIFs to the program or add them with the "Open File" icon located in the bottom left corner.)
  • How to Merge Audio and Video into One  + (Please download, install, and open the [htPlease download, install, and open the [https://www.joyoshare.com/video-joiner/ video joiner] on your computer. Find "Open File" button at bottom left of its main interface to browse and upload the video to be merged with an audio. Also, you can directly drag and drop.dio. Also, you can directly drag and drop.)
  • Easy Way to Download Tidal Music to Computer  + (Please just open this tool and the Tidal aPlease just open this tool and the Tidal app. AudFree Tidal Music Downloader provides an easy way to import Tidal songs directly and automatically. Just find the music and playlist that you’d like to download, click the ‘…’ icon to choose ‘Share’ icon to copy the URL. And then you can paste it to the search box of AudFree Software. Hit on the ‘+’ button, and then it will automatically load all Spotify music to this software.y load all Spotify music to this software.)
  • How to Add Music to iMovie from Spotify  + (Please make sure you have downloaded and iPlease make sure you have downloaded and install the Spotify app and AudFree [https://www.audfree.com/spotify-music-converter-mac/ Spotify Downloader Mac] on your computer well. And then you can follow the detailed tutorial to download and use Spotify songs on iMovie easily.ad and use Spotify songs on iMovie easily.)
  • FluidSIM-H - 01  + (Por defecto tiene dos entradas al tanque aPor defecto tiene dos entradas al tanque así que habrá que cerrar una vía. Pulsar doble click en la vía del lateral y marcar la check box dónde pone "shut up", así se taponará, Además es recomendable filtrar el aceite de retorno al tanque. Si no lo lleva incorporado se añadirá. Para cambiar la posición del filtro lo rotaremos 90° pulsando el botón derecho y activando el menú de rotate.tón derecho y activando el menú de rotate.)
  • Puzzle en bois  + (Pour assembler vos images, vous allez commPour assembler vos images, vous allez commencer par installer [https://inkscape.org/fr/ Inkscape] : il s’agit d’un logiciel libre avec lequel nous allons créer le dessin et créer le puzzle. Je n’expliquerai pas son fonctionnement en détails ici. De nombreux tutoriels existent [https://inkscape.org/fr/doc/tutorials/basic/tutorial-basic.fr.html à cette adresse par exemple] pour maîtriser la bête. Voici les étapes succinctes qui m’ont permises de créer ces chefs d’oeuvre ;-) : # Dans Inkscape, créez une zone de travail de la taille de votre puzzle. # Importez chacune de vos images (Fichier > Importer) # Vectorisez chaque image en noir et banc (Les paramètres que j’ai choisi : Passe simple en cochant les cases “adoucir”, “Empiler les passes”, “Retirer l’arrière-plan”). # Redimensionnez les images vectorisées si nécessaire et ordonnez les images dans les différents plans (premier plan, plans intermédiaires, dernier plan)
    {{{1}}}
    Si vous voulez limiter la difficulté de résolution du puzzle, notamment s’il se destine à un enfant, évitez les zone vides dans votre motif. Ajouter un arrière-plan légèrement gravé  permet de pallier ce soucis.
    À noter aussi que beaucoup de dessins sur Internet sont positifs, c’est à dire que leurs contours sont noirs et leurs fonds blanc. Tels quels, vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.
    , vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.</div> </div>)
  • Puzzle en bois  + (Pour assembler vos images, vous allez commPour assembler vos images, vous allez commencer par installer [https://inkscape.org/fr/ Inkscape] : il s’agit d’un logiciel libre avec lequel nous allons créer le dessin et créer le puzzle. Je n’expliquerai pas son fonctionnement en détails ici. De nombreux tutoriels existent [https://inkscape.org/fr/doc/tutorials/basic/tutorial-basic.fr.html à cette adresse par exemple] pour maîtriser la bête. Voici les étapes succinctes qui m’ont permises de créer ces chefs d’oeuvre ;-) : # Dans Inkscape, créez une zone de travail de la taille de votre puzzle. # Importez chacune de vos images (Fichier > Importer) # Vectorisez chaque image en noir et banc (Les paramètres que j’ai choisi : Passe simple en cochant les cases “adoucir”, “Empiler les passes”, “Retirer l’arrière-plan”). # Redimensionnez les images vectorisées si nécessaire et ordonnez les images dans les différents plans (premier plan, plans intermédiaires, dernier plan)
    {{{1}}}
    Si vous voulez limiter la difficulté de résolution du puzzle, notamment s’il se destine à un enfant, évitez les zone vides dans votre motif. Ajouter un arrière-plan légèrement gravé  permet de pallier ce soucis.
    À noter aussi que beaucoup de dessins sur Internet sont positifs, c’est à dire que leurs contours sont noirs et leurs fonds blanc. Tels quels, vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.
    , vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.</div> </div>)
  • Déployer une passerelle LoRaWAN pour The Things Network  + (Pour pouvoir utiliser le Raspberry Pi il fPour pouvoir utiliser le Raspberry Pi il faut au préalable écrire l'image Raspbian sur la carte SD. Mais ce n'est pas l'objet de ce tuto... Pour la version choisissez de télécharger '''"RASPBIAN"''' sur cette page : https://www.raspberrypi.org/downloads/ Cette version de Rapsbian ne possède pas d'interface graphique mais nous n'en aurons pas besoin.raphique mais nous n'en aurons pas besoin.)
  • The Things Network  + (Pour pouvoir utiliser le Raspberry Pi il fPour pouvoir utiliser le Raspberry Pi il faut au préalable écrire l'image Raspbian sur la carte SD. Mais ce n'est pas l'objet de ce tuto... Pour la version choisissez de télécharger '''"RASPBIAN"''' sur cette page : https://www.raspberrypi.org/downloads/ Cette version de Rapsbian ne possède pas d'interface graphique mais nous n'en aurons pas besoin.raphique mais nous n'en aurons pas besoin.)
  • Déployer une passerelle LoRaWAN pour The Things Network  + (Pour pouvoir utiliser le Raspberry Pi il fPour pouvoir utiliser le Raspberry Pi il faut au préalable écrire l'image Raspbian sur la carte SD. Mais ce n'est pas l'objet de ce tuto... Pour la version choisissez de télécharger '''"RASPBIAN"''' sur cette page : https://www.raspberrypi.org/downloads/ Cette version de Rapsbian ne possède pas d'interface graphique mais nous n'en aurons pas besoin.raphique mais nous n'en aurons pas besoin.)
  • Mode opératoire Silhouette CAMEO  + (Taille de la page a couper : largeur 245 pour le rouleau entier Taille du tapis de coupe CAMEO 12 x 12 pour le petit tapis et 12 x 24 pour le grand tapis)
  • Ultimaker 3 Ext : Pièce avec 2 couleurs différentes  + (Ici, nous avons 3 volumes : - Le cube (Couleur A) - La Sphère (Couleur B) - Le cylindre (Couleur B) Une fois vos volumes créés et identifiés, exportez au format .stl les groupes : le cube à part et la sphère + le cylindre ensemble.)
  • Ultimaker 3 Ext : Pièce avec 2 couleurs différentes  + (Ici, nous avons 3 volumes : - Le cube (Couleur A) - La Sphère (Couleur B) - Le cylindre (Couleur B) Une fois vos volumes créés et identifiés, exportez au format .stl les groupes : le cube à part et la sphère + le cylindre ensemble.)
  • Le crayon laser  + (Bravo, vous avez découpé et gravé le dessin de dragon !)
  • Le crayon laser  + (Bravo, vous avez découpé et gravé le dessin de dragon !)
  • Losslessly Combine WebM Files in 2020  + (Quickly download and install Joyoshare [htQuickly download and install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on Windows or Mac. After that, you should open it and click "Open File" to choose your WebM files. Alternatively, you can drag and drop files from desktop to the program.nd drop files from desktop to the program.)
  • Humanure Dry Toilets, low-tech tricks  + (Refer to the pictures available in the galRefer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
  • Humanure Dry Toilets, low-tech tricks  + (Refer to the pictures available in the galRefer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
  • Collier personnalisé en graines de Caconnier  + (Récupérer des graines de caconnier, du fil de pêche, des chutes de contreplaqué et du bois peyi.)
  • How to create a 3D sculpture  + (Steps: # Download an install [https://appsSteps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
  • How to create a 3D sculpture  + (Steps: # Download an install [https://appsSteps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
  • Arbre multimédia  + (Vous trouverez ici l'image que nous utilisons sur nos cartes SD : Mais voici les sources pour installer vous même la distribution linux sur votre raspberry)
  • SunZilla - Guide 4: Solar box  + (To physically anchor the the boxes togetheTo physically anchor the the boxes together, the joins need to be added. The joins hold the boxes in place on a wooden foot structure. This structure can be CNC-milled with the provided .DMX source file, which you can download below. You can also old-school wood-craft them, following the .PDF technical drawing, also downloadable below. After milling the foot structure, put the boxes in their places and drill 4 holes through the outside bottom rim of each box and the underlying wooden structure. Using these holes, the different parts are connected by a bent bicycle spoke. The shape of the spoke can be seen in the following figure. The shape of the spoke can be seen in the following figure bellow. The height of the “mouth” of the bent spoke depends on the thickness of the wooden foot (see diagram). It should 2-4 mm less than the added thickness of the box and the wooden foot. To bend the spoke, start from one side of the spoke and do one bending after the other by holding the spoke with pliers and bending then the longer end of the spoke with your hand in the shape you like.poke with your hand in the shape you like.)
  • EMI probe 12+ activities  + (The EMI detector comes in two forms: the gThe EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
  • PiKon telescope  + (The PiKon telescope is a robust design butThe PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
  • Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing  + (The [https://www.seeedstudio.com/60GHz-mmWThe [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
  • Fruit piano  + (The activity consists in turning fruits inThe activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
  • Fruit piano  + (The activity consists in turning fruits inThe activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
  • Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictuFirst of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
  • Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictuFirst of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
  • Buzzing Bee Circuit  + (The battery holder can be found on TinkerCThe battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
    created file to the printer. PRINT! <br/>)
  • How to Download Spotify to MP3 in 320kbps High Quality  + (The best Spotify to MP3 320kbps downloaderThe best Spotify to MP3 320kbps downloader is the [https://www.audkit.com/spotilab-music-converter.html AudKit Spotify Music Converter]. It can download '''any audio content''' including songs, playlists, podcasts, albums, and audiobooks from Spotify to '''MP3, AAC, M4A, M4B, FLAC, and WAV''' at '''5X''' '''in batches'''. It allows '''all Spotify users''' including those free users to download Spotify music '''without Spotify Premium'''. You don't need to worry about the audio quality since it can retain '''100% lossless sound quality''' and '''full ID3 tags''' (i.e., title, artist, cover, year). This great tool also endows you with the ability to change the output quality parameters such as the '''bit rate, sample rate, channel''', and the like. Before using it, please go to the [https://www.audkit.com/ AudKit.com] to install this powerful downloader on your '''Windows PC or MacBook'''.oader on your '''Windows PC or MacBook'''.)
  • How to Combine Clips in iMovie  + (The first thing to do is running iMovie on your Mac computer. Then you need to click on "File" and choose "New Project" to begin a new project. After that, you can name the project and adjust some settings according to your desires.)
  • Colorado Top Bar Assembly  + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
  • DIY Makey Makey with Arduino Leonardo  + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
  • Arduino to ThingSpeak via SIM800 No Wi-Fi  + (The legacy project documents that were oriThe legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
  • OpenKnit: digital fabrication tool to create your own clothes  + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
  • Ultimate Guide to Fix Tidal Not Playing Songs  + (The tidal app for music streaming is now aThe tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
  • How to Play Spotify on Yoto Player  + (There is a companion Yoto app available onThere is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
  • Geiger counter  + (This is a timelapse of the assembly process of the geiger counter)
  • Node Red with MQTT on Raspberry Pi  + (This project works without much additional hardware. The one and only requirement is you just need a Raspberry Pi.)
  • 8bits & Chocolate - decorative candy dispenser  + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
  • How to Listen to Tidal on Multiple Devices Simultaneously  + (Tidal offers several major plans for you tTidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month. # If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days. # If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus. # To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family. # After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
    '' from Family Hi-Fi or Hi-Fi Plus. <br/>)
  • Snap circuits activities for 12+  + (To begin with, kids will need to build or To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
  • How to Download Spotify Podcast to MP3 in 2024  + (Now, let's walk through the stepwise guideNow, let's walk through the stepwise guide on how to download your favorite Spotify podcasts to MP3 using the AudFun Spotify Music Converter: Step 1. Go to [https://www.audfun.com/ AudFun.com] and install this software on a Windows or Mac. Step 2. '''Drag and drop''' the episodes or the whole podcast from the Spotify app to the screen of AudFun to load all episodes. Step 3. Tap on the top-right '''Menu''' tab and pick '''Preferences''' > '''Convert'''. Then you can select the '''Format''' as MP3 and customize the '''Bit Rate''' as 320kbps. Step 4. Once set, hit the '''Convert''' button at the bottom right on AudFun. This software will work at 5X to download all added podcasts in batches to MP3.ownload all added podcasts in batches to MP3.)
  • How to Play Apple Music Soundtrack in GTA5  + (To enjoy your Apple Music library while plTo enjoy your Apple Music library while playing GTA 5, you'll first need to convert your Apple Music tracks into a compatible format. The best tool for this job is [https://www.audfree.com/auditior AudFree Apple Music Converter]. This powerful software allows you to convert Apple Music songs into formats like MP3 or M4A, making them compatible with GTA 5. Here's why AudFree Apple Music Converter stands out: 1) '''Convert encrypted Apple Music content to various formats:''' AudFree Apple Music Converter can convert all content from Apple Music to unprotected MP3, FLAC, WAV, AAC, M4A, and M4B files. 2)  '''Keep lossless audio quality:''' This expert tool ensures that your tracks are converted with the original quality audio, preserving the integrity of your music. 3) '''Support batch conversion at 30X speed:''' The software is user-friendly, and the conversion process is quick at up to 30X faster speed. It enables you to convert unlimited number of tracks together. 4) '''Preservation of Metadata Info:''' It retains important song metadata information. With it,  ID3 tags such as artist, album, and cover art will be retained, ensuring your GTA 5 experience is as immersive as possible. 5) '''Play Apple Music without premium:''' Once converted, you can keep the Apple Music conversions forever. That means you can play those unprotected Apple Music audio files at all devices and players whenever you like.io files at all devices and players whenever you like.)
  • Timelapes with Raspberry Pi Camera  + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
  • Petit compteur - compteur de passages à horaires programmables  + (Téléchargez le fichier Coque3D et imprimez le dans une résolution suffisamment fine (0,1mm environ) pour ne pas obstruer les divers trous de vis et de connectique.)
  • Petit compteur - compteur de passages à horaires programmables  + (Téléchargez le fichier Coque3D et imprimez le dans une résolution suffisamment fine (0,1mm environ) pour ne pas obstruer les divers trous de vis et de connectique.)
  • SolarOSE - Guide 1: Support structure of the mirror field  + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
  • SolarOSE - Guide 1: Support structure of the mirror field  + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
  • Fabrication D'une Borne D'arcade  + (Ce dont vous avez avez besoin : * Une cartCe dont vous avez avez besoin : * Une carte micro SD ( Minimum 8go )  : Cette carte servira de disque dur pour le raspberry '''FORMATEZ VOTRE CARTE MICRO-SD EN FAT32''' Si ce n’est pas déjà fait, vous allez devoir formater votre carte micro-SD (ou carte-SD) au format FAT32. Pour cela, connectez là sur votre PC (via un slot micro-SD ou en USB via un adaptateur), ouvrez l’explorateur Windows et faites un clic droit sur votre carte et cliquez sur ''Formater''… Dans la fenêtre qui s’ouvre, sélectionnez FAT32 dans le menu ''Système de fichiers''. Vous pouvez donner un nom à votre carte si vous le voulez. Il est possible ici de faire un formatage rapide. Cliquez enfin sur démarrer. '''TÉLÉCHARGER LES SOURCES DE RECALBOXOS''' Rendez-vous sur https://github.com/recalbox/recalbox-os/releases et téléchargez la dernière version, en cliquant sur le nom du fichier Zip. Au moment où je fais ce tutoriel, il s’agit de la version 4.0.1 Décompressez le contenu du fichier zip téléchargé sur votre carte micro-SD. Pour ma part j’utilise, 7-Zip mais vous pouvez utiliser un autre gestionnaire d’archive. utiliser un autre gestionnaire d’archive.)
  • Fabrication D'une Borne D'arcade  + (Ce dont vous avez avez besoin : * Une cartCe dont vous avez avez besoin : * Une carte micro SD ( Minimum 8go )  : Cette carte servira de disque dur pour le raspberry '''FORMATEZ VOTRE CARTE MICRO-SD EN FAT32''' Si ce n’est pas déjà fait, vous allez devoir formater votre carte micro-SD (ou carte-SD) au format FAT32. Pour cela, connectez là sur votre PC (via un slot micro-SD ou en USB via un adaptateur), ouvrez l’explorateur Windows et faites un clic droit sur votre carte et cliquez sur ''Formater''… Dans la fenêtre qui s’ouvre, sélectionnez FAT32 dans le menu ''Système de fichiers''. Vous pouvez donner un nom à votre carte si vous le voulez. Il est possible ici de faire un formatage rapide. Cliquez enfin sur démarrer. '''TÉLÉCHARGER LES SOURCES DE RECALBOXOS''' Rendez-vous sur https://github.com/recalbox/recalbox-os/releases et téléchargez la dernière version, en cliquant sur le nom du fichier Zip. Au moment où je fais ce tutoriel, il s’agit de la version 4.0.1 Décompressez le contenu du fichier zip téléchargé sur votre carte micro-SD. Pour ma part j’utilise, 7-Zip mais vous pouvez utiliser un autre gestionnaire d’archive. utiliser un autre gestionnaire d’archive.)
  • Manette double d'arcade  + (Vous pouvez commander un kit d'arcades surVous pouvez commander un kit d'arcades sur ce site : http://www.smallcab.net/joysticks-zippy-boutons-p-608.html ou sur des sites chinois, à vous de voir. Pensez aussi à commander les câbles GPIO et des switchs s'ils ne sont pas inclus dans le kit. Par défaut, vous pouvez relier directement votre manette à votre raspberry pi par les câbles GPIO (Cf cas 1 plus loin). Le raspberry pi doit être accroché à votre structure. Pour ma part, je voulais pouvoir relier ma manette à l'aide d'un câble USB pour pouvoir l'enlever facilement de mon raspberry pi qui me sert de mediacenter dans le salon. J'ai donc acheté en plus une carte USB Xin-Mo (http://www.smallcab.net/joueurs-p-1318.html) sur laquelle je viens connecter les câbles GPIO (cf cas 2 plus loin).cter les câbles GPIO (cf cas 2 plus loin).)
  • Manette double d'arcade  + (Vous pouvez commander un kit d'arcades surVous pouvez commander un kit d'arcades sur ce site : http://www.smallcab.net/joysticks-zippy-boutons-p-608.html ou sur des sites chinois, à vous de voir. Pensez aussi à commander les câbles GPIO et des switchs s'ils ne sont pas inclus dans le kit. Par défaut, vous pouvez relier directement votre manette à votre raspberry pi par les câbles GPIO (Cf cas 1 plus loin). Le raspberry pi doit être accroché à votre structure. Pour ma part, je voulais pouvoir relier ma manette à l'aide d'un câble USB pour pouvoir l'enlever facilement de mon raspberry pi qui me sert de mediacenter dans le salon. J'ai donc acheté en plus une carte USB Xin-Mo (http://www.smallcab.net/joueurs-p-1318.html) sur laquelle je viens connecter les câbles GPIO (cf cas 2 plus loin).cter les câbles GPIO (cf cas 2 plus loin).)
  • Fabriquer une télécommande pour reflex/fr  + (Vous pouvez trouver ici les plans de constVous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
  • Télécommande pour reflex  + (Vous pouvez trouver ici les plans de constVous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
  • Télécommande pour reflex  + (Vous pouvez trouver ici les plans de constVous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
  • Light sensitive e-textile bag  + (We will be using S4A to program the board.We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
  • Light sensitive e-textile bag  + (We will be using S4A to program the board.We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
  • ESP32 with WebSerial: A Comprehensive Guide  + (WebSerial is a web standard that allows weWebSerial is a web standard that allows websites to communicate with serial devices. It bridges the web and the physical world, enabling web applications to interact with hardware devices. This opens up a world of possibilities for IoT projects, allowing real-time interaction between web applications and physical devices.een web applications and physical devices.)
  • Brightness control activity v12  + (What you need[https://docs.google.com/docuWhat you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
  • Empty room activity v12  + (What you need[https://docs.google.com/docuWhat you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
  • How to Add Subtitles to YouTube Video  + (With [https://www.joyoshare.com/video-joinWith [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] downloaded and installed on your desktop, double-click to launch it. At the bottom left, click the "Open File" to browse your local file and select the target YouTube video. You can also drag your video to its interface quickly and simply.video to its interface quickly and simply.)
  • How to Save Spotify Music Tracks without a Premium  + (You can convert Spotify songs using either the Web player mode or the App mode.)
  • AWS IoT Core IoT Platform Series - 6  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Node Red with Raspberry Pi  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Node Red Controlled Web LED on ESP32 with Raspberry Pi 4  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
  • Node-Red Telegram Bot with Temperature Logger Part-2  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
  • Getting Started with TivaWare Launchpad - Basics  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
  • Ethernet-Enhanced LoRa Gateway Minimizing Delay  + (You must check out [https://www.pcbway.comYou must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
  • Minetest and 3D scanning  + (You will be suing Qlone, an application foYou will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
  • Minetest and 3D scanning  + (You will be suing Qlone, an application foYou will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
  • Pet that lights up upon interaction  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Pet that lights up upon interaction  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Energy saving house with ESP32  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Energy saving house with ESP32  + (You will need to use Arduino IDE to code aYou will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
  • Malinette  + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
  • Malinette  + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
  • Réveil mp3 avec arduino  + (imprimante 3d ultimaker 2 Matière utilisée : PLA Réglages : voir fichier config imp3D.png Modèle : https://www.tinkercad.com/things/0svbwI2n4Ez-copy-of-megaphone/editv2)
  • Astuce (s) pour plotter  + (ouvrir votre fichier pdf avec open office ou world faire un Ctrl A puis un CTRL C puis un clic pour désactiver le A)
  • Canon confettis  + (visualisation du montage)
  • Canon confettis  + (visualisation du montage)
  • Digital Environmental Education Remote control  + (Una volta installate le tavolozze, puoi imUna volta installate le tavolozze, puoi importare il codice che trovi allegato a questo passaggio per creare il flusso. Basta fare clic sul menu (in alto a destra) -> importa -> dagli Appunti. Quindi, nella finestra seguente, incolla il codice copiato dal file allegato qui. Ora è il momento di inserire i tuoi dati personali. In particolare, è necessario inserire il token di autorizzazione nei blocchi "DEEDU1" e "DEEDU2", modificando il parametro "InsertYourTokenHere". Al termine, fare clic su Distribuisci. In caso di problemi, è possibile scaricare un'immagine ISO qui. Fai attenzione, perché deve essere personalizzato inserendo il token blynk generato sul tuo smartphone.endo il token blynk generato sul tuo smartphone.)
  • Montaje 3DSteel V2 - Tutorial 4 - Puesta a Punto  + ( # Encendemos la impresora. # Comprobamos que no muestre ningún mensaje de error y que la información tenga sentido. )
  • Montaje 3DSteel - Tutorial 4 - Puesta a Punto  + ( #Encendemos la impresora. #Comprobamos que no muestre ningún mensaje de error y que la información tenga sentido. )
  • Commande et instrumentation de trottinette électrique 500W avec Arduino méga  + (<nowiki>'''2. Bibliographie :'''<'''2. Bibliographie :'''

    Lien download :

    '''sketch_escooter_feed_back_reel_V1.ino''' 

    https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing

    '''escooter_ampli_SIMULINK.mdl'''

    https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing

    '''escooter feed back ISIS.DSN'''

    https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing

    En anglais

    https://forum.arduino.cc/index.php?topic=477397.0

    article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »

    En attente

    '''3. Programme en boucle ouverte''' 

    Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.

    BP1 pour incrémenter manuellement le rapport cyclique, BP2 le  décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein. 

    La vitesse du moteur est pratiquement proportionnelle au rapport cyclique

    https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg

    Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield

    Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants. 

    http://www.robotpower.com/products/MegaMotoPlus_info.html

    http://www.robotshop.com/en/dc-motor-driver-2-15a.html

    https://www.pololu.com/file/0J51/vnh3sp30.pdf

    https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg

    mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant. 

    Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.

    Mais quel doit être la valeur du courant de limitation ?

    Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.

    Dans notre cas, le courant de limitation devra etre de 

    Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A

    De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.

    Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.

    Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de  L/R= 1.5ms.

    Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.

    l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.

    '''Algo boucle ouverte'''

    Routine d'interruption toutes les 0.1S

    Lire tension et courant

    Boucle loop (scrutation des boutons poussoirs) 

    Si BP1=1 alors incrementer PWM

    Si BP2=1 alors décrementer PWM

    Si BP3=1 alors PWM=0

    Affichage des variables tous les 0.2s

    '''code'''

    {{

    // include the library code:

    #include

    #include

    #include

    #define SERIAL_PORT_LOG_ENABLE 1

    #define Led     13       // 13 pour la led jaune sur la carte

    #define BP1     30       // 30 BP1

    #define BP2     31       // 31 BP2           

    #define BP3     32       // 32 BP3

    #define LEDV    33       // 33 led

    #define LEDJ    34       // 34 led

    #define LEDR    35       // 35 led

    #define relay   36       // 36 relay

    #define PWM10    10      //11   timer2    

    LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26

    // Configuration des variables

    unsigned   int UmoteurF = 0;  // variable to store the value coming from the sensor

    unsigned   int Umoteur = 0;

    unsigned   int Umoteur2 = 0;

    unsigned   int Umoteur3 = 0;

    unsigned   int Umoteur4 = 0;

    unsigned   int ImoteurF = 0;  

    unsigned   int Imoteur = 0;

    unsigned   int Imoteur2 = 0;

    unsigned   int Imoteur3 = 0;

    unsigned   int Imoteur4 = 0;

    byte Rcy=0 ;    //rapport cyclique  8bit

    unsigned    int temps;

    // the setup function runs once when you press reset or power the board

    void setup() {

    pinMode(Led, OUTPUT);   //led carte arduino

    pinMode(LEDV, OUTPUT);

    pinMode(LEDR, OUTPUT);

    pinMode(LEDJ, OUTPUT);

    pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2

    //  digitalWrite(LEDV,LOW);

    Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000

    Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt

    lcd.begin(20, 4);  

    Serial1.begin(9600); 

    TCCR2B = (TCCR2B & 0b11111000)
    r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT);   //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2<br /><br />//  digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000<br /><br />Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4);  <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
  • Commande et instrumentation de trottinette électrique 500W avec Arduino méga  + (<nowiki>'''2. Bibliographie :'''<'''2. Bibliographie :'''

    Lien download :

    '''sketch_escooter_feed_back_reel_V1.ino''' 

    https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing

    '''escooter_ampli_SIMULINK.mdl'''

    https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing

    '''escooter feed back ISIS.DSN'''

    https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing

    En anglais

    https://forum.arduino.cc/index.php?topic=477397.0

    article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »

    En attente

    '''3. Programme en boucle ouverte''' 

    Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.

    BP1 pour incrémenter manuellement le rapport cyclique, BP2 le  décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein. 

    La vitesse du moteur est pratiquement proportionnelle au rapport cyclique

    https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg

    Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield

    Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants. 

    http://www.robotpower.com/products/MegaMotoPlus_info.html

    http://www.robotshop.com/en/dc-motor-driver-2-15a.html

    https://www.pololu.com/file/0J51/vnh3sp30.pdf

    https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg

    mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant. 

    Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.

    Mais quel doit être la valeur du courant de limitation ?

    Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.

    Dans notre cas, le courant de limitation devra etre de 

    Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A

    De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.

    Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.

    Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de  L/R= 1.5ms.

    Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.

    l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.

    '''Algo boucle ouverte'''

    Routine d'interruption toutes les 0.1S

    Lire tension et courant

    Boucle loop (scrutation des boutons poussoirs) 

    Si BP1=1 alors incrementer PWM

    Si BP2=1 alors décrementer PWM

    Si BP3=1 alors PWM=0

    Affichage des variables tous les 0.2s

    '''code'''

    {{

    // include the library code:

    #include

    #include

    #include

    #define SERIAL_PORT_LOG_ENABLE 1

    #define Led     13       // 13 pour la led jaune sur la carte

    #define BP1     30       // 30 BP1

    #define BP2     31       // 31 BP2           

    #define BP3     32       // 32 BP3

    #define LEDV    33       // 33 led

    #define LEDJ    34       // 34 led

    #define LEDR    35       // 35 led

    #define relay   36       // 36 relay

    #define PWM10    10      //11   timer2    

    LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26

    // Configuration des variables

    unsigned   int UmoteurF = 0;  // variable to store the value coming from the sensor

    unsigned   int Umoteur = 0;

    unsigned   int Umoteur2 = 0;

    unsigned   int Umoteur3 = 0;

    unsigned   int Umoteur4 = 0;

    unsigned   int ImoteurF = 0;  

    unsigned   int Imoteur = 0;

    unsigned   int Imoteur2 = 0;

    unsigned   int Imoteur3 = 0;

    unsigned   int Imoteur4 = 0;

    byte Rcy=0 ;    //rapport cyclique  8bit

    unsigned    int temps;

    // the setup function runs once when you press reset or power the board

    void setup() {

    pinMode(Led, OUTPUT);   //led carte arduino

    pinMode(LEDV, OUTPUT);

    pinMode(LEDR, OUTPUT);

    pinMode(LEDJ, OUTPUT);

    pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2

    //  digitalWrite(LEDV,LOW);

    Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000

    Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt

    lcd.begin(20, 4);  

    Serial1.begin(9600); 

    TCCR2B = (TCCR2B & 0b11111000)
    r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT);   //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2<br /><br />//  digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000<br /><br />Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4);  <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
  • Découpe laser 60w - Modèle rouge chinois  + ( * Ouvrir RdWorks )
  • Cheap and Cute Digital PhotoFrame Without SD Card on ESP8266and1-8inch TFT  + (<nowiki>1.8 TFT Panel ST7735 https:/1.8 TFT Panel ST7735 https://www.aliexpress.com/item/32913848470.html

    1.8 TFT Panel ST7735 https://www.banggood.com/1_441_82_02_22_42_8-Inch-TFT-LCD-Display-Module-Colorful-Screen-Module-SPI-Interface-p-1494883.html

    ESP8266 WEMOS D1 https://www.aliexpress.com/item/33036965281.html

    3D Printed Case https://www.thingiverse.com/thing:4097143

    Some Wires & Soldering Iron.
    m/thing:4097143<br /><br />Some Wires & Soldering Iron.</nowiki>)
  • 3D CAM sous Fusion 360  + (<nowiki>Avant de commencer la prograAvant de commencer la programmation du CAM, considérez votre pièce et la meilleure approche pour l'usiner. Ces décisions dépendent de la forme du modèle, des matériaux, et des contraintes de la machine CNC que vous utilisez. Dans cette étape, vous apprendrez comment ces facteurs impactent votre stratégie d'usinage en ce qui concerne la fixation (workholding), le référencement (registration, c'est-à-dire s'assurer que la CNC sache où se trouve la pièce, et les paramètres du CAM.

    Chemins d'outil 3D

    Dans un toolpath 2D (poche, contour, tracé, ...), la tête de la fraise reste à une profondeur fixe (axe Z) durant une passe d'usinage, et ne bouge que dans les directions X et Y pendant qu'elle coupe. Ce type d'usinage est idéal pour des pièces prismatiques, pour lesquelles toutes les faces usinées sont perpendiculaires à l'axe de la broche de la machine.

    Lors de la programmation de pièces non prismatiques, telles que des moules ou des formes organiques, les opérations 2D sont insuffisantes. Vous devez utiliser des opérations de CAM 3D, dans lesquelles la fraise se déplace de manière dynamique selon X, Y et Z.

    Serrage

    Le serrage (workholding) est la stratégie pour maintenir votre pièce de manière rigide pendant le processus d'usinage. Lors de la programmation avec des parcours d'outil 3D, la mise en oeuvre est une considération initiale importante. Cela est particulièrement vrai pour les pièces qui nécessitent un usinage des deux côtés, lorsque la pièce sera basculée entre les ''setups''. (programmes d'usinage)

    Pour la programmation de pièces prismatiques,où les CAM 2D et 2.5D requièrent uniquement un modèle de CAO de la pièce que vous souhaitez usiner, aucune fonctionnalité supplémentaire n'est présente pour la fixation ou le référencement . En effet, la pièce prend la forme d'un prisme rectangulaire, qui peut être facilement maintenu dans un étau ou fixé au martyr.

    Mais que faites-vous lorsque votre forme est plus organique ou irrégulière, et doit également être retournée à la machine des deux côtés? Dans ce cas, vous devez créer un matériau supplémentaire qui maintiendra votre pièce dans un étau, contre le martyr ou à plat contre le bas de la machine. Il est très difficile de programmer le CAM sans avoir ces fonctionnalités intégrées dans votre modèle.

    En d’autres termes, l’usinage 3D avec retournement nécessite que vous modélisiez la matière que vous souhaitez laisser ainsi que des onglets pour éviter que votre pièce ne se détache dans la machine. Ces onglets seront coupés et poncés après l'usinage, généralement avec une scie à ruban et une ponceuse à disque.

    Pour votre cuillère de service, vous aurez deux onglets - un à chaque extrémité - et un prisme rectangulaire qui tiendra la cuillère à plat après le retournement. Lors de la modélisation, il est préférable de créer ces suppléments en tant que corps (bodies) distincts de la pièce à usiner.

    Référencement

    Étant donné que la cuillère sera usinée des deux côtés (usinage par retournement), vous devez vous assurer que la machine à commande numérique peut localiser la pièce avec précision après son déplacement. Ceci s'appelle l'enregistrement.

    Si vous avez déjà utilisé Haas, vous savez utiliser une sonde pour localiser votre pièce. Cependant, comme beaucoup de routeurs de table, le DMS n’a pas de sonde. Lorsque vous utilisez le DMS pour localiser l’origine de votre système de coordonnées de travail (Work Home), vous insérez un outil dans la broche et vous le positionnez au bon endroit. Il est courant de coincer un morceau de papier entre le support et l’outil pour s’assurer que Z est correct. Dans la classe des machines DMS, vous apprendrez à saisir les codes pour configurer votre WCS de cette manière. Comme vous pouvez l’imaginer, ce système n’est pas précis, car vous ne faites que "regarder les yeux" de cet endroit.

    Cela implique de devoir considérer une manière d'aligner les deux côtés de la pièces précisément si elle doit s'usiner des deux côtés. Il y a plusieurs méthodes possibles, chacune avec ses avantages et ses inconvénients qui dépendent de la spécificité de la pièce à usiner. Parmi les méthodes les plus courantes: - Attacher des butées sur le martyr ou le lit de la fraiseuse, où ira se caler la pièce usinée. - Usiner un contour dans le martyr, pour ensuite placer la pièce à l'intérieur en serrage - forer des trous pouvant accueillir des "pins" en bois, dans la pièce à usiner et dans le martyr, pour les solidariser (le plus précis)

    La dernière méthode est celle que nous utiliserons pour la cuillère. Lors de l'usinage de la face avant, vous percerez également trois trous à travers le stock et partiellement à travers le martyr. Lors du retournement de la pièce, vous insérerez des tourillons dans ces trous afin d'aligner l'autre face parfaitement avec la première.

    Paramétrage du CAM Les spécificités du projet (usinage de bois sur une fraiseuse multi-outils) vont également déterminer certains choix lors de la programmation des chemins d'outil. En l'occurrence, l'usinage du bois ou du platique n'est pas un usinage rapide. Cela autorise l'utilisation de chemins d'outils adaptatifs pour le "dégrossage", mais vous ne pouvez pas utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise.
    utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise.</nowiki>)
  • How to Delete Tidal Account Permanently without Subscription  + (<nowiki>If you are using Apple produIf you are using Apple products such as iOS devices, you will find a Delete Account option on your iOS Tidal app. Just follow the steps below to close Tidal account permanently.


    Step 1. Open the Tidal app on your iPhone.

    Step 2. Tap the top-right '''gear''' icon from the '''My Collection''' section to go to Tidal '''Settings'''.

    Step 3. Scroll down and choose ''''Manage account''''.

    Step 4. On the new screen, tap the bottom ''''Delete account'''' option.


    gt;Step 4. On the new screen, tap the bottom ''''Delete account'''' option.<br /><br /><br/></nowiki>)
  • How to Set Tidal Sleep Timer  + (<nowiki>If you are using an Android If you are using an Android phone, you need to install a professional Sleep Timer app from the Google Play store on your Android device and then create a sleep timer according to your needs. Now, look at the steps below.

    '''Step 1.''' Download ''''Sleep Timer (Turn music off)'''' on your Android from Google Play.

    '''Step 2.''' Launch the app and tap on the three vertical dots in the top right corner of the home screen.

    '''Step 3.''' On the '''Setting''' menu, click ''''Player to launch on start'''' and select ''''Tidal'''' from the app list.

    '''Step 4.''' Go back to the '''Settings''' menu and then choose ''''On sleep'''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.
    ''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.</nowiki>)
  • Automated Gardening Plant with arduino Uno under the DEEDU project  + (<nowiki>You will need<br /><You will need

    electronic control and command part (listed below)

    water tank

    a plant in a pot

    a box for electronic (https://www.thingiverse.com/thing:4106140)

    3d printed light sensor support (https://www.thingiverse.com/thing:3986667)

    3d printed sprinkler (https://www.thingiverse.com/thing:3986672)

    For the Command & Control part the material used are the following:

    - 1 Arduino UNO link

    - 1 moisture sensor link

    - 1 CO2 Gas sensor Mq7 link

    - 1 Lcd screen 2x16 (+i2c)) link

    - 1 LDR light sensor (photoresistor) link

    - 2 push buttons link

    - 1 Temp + humidity sensor DHT11 link

    - 1 5V water pump link

    - 1 5v relay link

    - 3 1k resistor link

    - 1 Breadbord or prototyping PCB link

    -2 5v power supply link
    link<br /><br />- 1 5V water pump link<br /><br />- 1 5v relay link<br /><br />- 3 1k resistor link<br /><br />- 1 Breadbord or prototyping PCB link<br /><br />-2 5v power supply link</nowiki>)
  • Boite aux lettres Connectée ESP8266  + ('''<u>1/ Connexion du node MCU :<'''1/ Connexion du node MCU :''' sur la platine de prototypage dans le sens de la longueur afin que les rangées de pattes du module ne soient pas connectées. Le Node MCU fonctionne en 3.3V mais les 2 composants utilisés fonctionnent avec 5V. Une PowerBank de 5V alimentera le dispositif. Il conviendra donc de connecter le capteur à ultrason et le player MP3 sur la broche Vin du node MCU afin de bénéficier des 5V en entrée. '''2/ Connexion du capteur :''' Vcc sur Vin de l'ESP Gnd sur Gnd Trig sur D1 Echo sur D2 '''3/ Connexion du player Groove MP3''' Vcc sur Vin Gnd sur Gnd Tx c'est le retour et ici nous ne l'utiliserons pas donc pas connecté Rx sur le Tx de l'ESP mais malheureusement après de nombreux essais infructueux il s'est avéré que les pin Rx et Tx de l'ESP n'étaient pas ceux qui devaient être utilisés. Un rapide coup d'oeil sur la documentation du module permet de voir que plusieurs pin peuvent faire office de Rx et Tx Les broches D7 et D8 de l'ESP font office également de Rx(2) et Tx(2) qui correspondent donc dans l'IDE Arduino aux GPIO 13 et 15 (ce sera important dans le code). Nous connectons donc le Rx du player MP3 à la broche D8 (Tx) de l'ESP afin que celui ci puisse envoyer ses informations. '''4/ Connexion du Jack du HP à l'entrée Jackdu player MP3''' Penser à l'alimentation du HP (power bank double USB) '''5/ Connexion du node au PC pour téléversement du code =) étape 2'''double USB) '''<u>5/ Connexion du node au PC pour téléversement du code =) étape 2</u>''')
  • Chapeau de marin en denim recyclé  + (Le symbole de flèche veux dire que habitueLe symbole de flèche veux dire que habituellement, cette pièce serait coupée sur le plis du tissu. Pour me faciliter la tâche, j'ai "ouvert" les pièces de patron, c'est à dire que je les ai tracés sur une feuille blanche, et j'ai fixé la copie à l'originale à l'aide de ruban gommé.pie à l'originale à l'aide de ruban gommé.)
  • FAQ - Inkscape  + ('''IMG 1''' - Par défaut, Inkscape vous do'''IMG 1''' - Par défaut, Inkscape vous donne la dimension des objets contour compris. La largeur de ce dernier peut gêner dans notre traitement pour les machines laser, cnc, vinyl ... Ces dernières, en général, passent au milieu du trait. Cela peut devenir vite gênant dans nos dessins. Si on travaille pour du laser, la taille du contour doit être très petite (par exemple, 0,05mm). Pour nos designs, on ne voit plus rien à l'écran. Une solution pour ne pas être embêté est de définir la dimension des objets sans tenir compte des contours. L'avantage est que vous pourrez dessiner avec des contours de 1mm par exemple pour voir correctement à l'écran. '''IMG 2''' - Paramétrage des dimensions dans Inkscape * Ouvrir les préférences d'Inskcape : Menu Édition > Préférences * Choisir Outils à gauche * Cocher Boîte englobante géométrique Inkscape ne prend plus en compte la taille des contours.  La taille correspond donc bien à la grandeur de notre objet. '''IMG 3''' - Un dernier réglage va vous permettre de ne plus redimensionner les contours de manière automatique et les coins arrondis des rectangles. Décochez les deux options.is des rectangles. Décochez les deux options.)
  • Inkscape - FAQ  + ('''IMG 1''' - Par défaut, Inkscape vous do'''IMG 1''' - Par défaut, Inkscape vous donne la dimension des objets contour compris. La largeur de ce dernier peut gêner dans notre traitement pour les machines laser, cnc, vinyl ... Ces dernières, en général, passent au milieu du trait. Cela peut devenir vite gênant dans nos dessins. Si on travaille pour du laser, la taille du contour doit être très petite (par exemple, 0,05mm). Pour nos designs, on ne voit plus rien à l'écran. Une solution pour ne pas être embêté est de définir la dimension des objets sans tenir compte des contours. L'avantage est que vous pourrez dessiner avec des contours de 1mm par exemple pour voir correctement à l'écran.
    '''IMG 2''' - Paramétrage des dimensions dans Inkscape
    *Ouvrir les préférences d'Inskcape : Menu Édition > Préférences *Choisir Outils à gauche *Cocher Boîte englobante géométrique Inkscape ne prend plus en compte la taille des contours.  La taille correspond donc bien à la grandeur de notre objet. '''IMG 3''' - Un dernier réglage va vous permettre de ne plus redimensionner les contours de manière automatique et les coins arrondis des rectangles. Décochez les deux options.
    rrondis des rectangles. Décochez les deux options. <br/>)
  • How to Share Spotify Song on Snapchat  + ('''''Q: Is there a way to share and at the'''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
  • Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou'''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
  • Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou'''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
  • Drone aile volante  + ( *Commencez par couper les marges avec une *Commencez par couper les marges avec une règle et un cutter, prenez garde à suivre correctement le tracé en pointillé. *Se munir du tube de colle, puis encollez la feuille du coin en haut à gauche (Répartissez de la colle sur toute la surface du verso ) , là positionner sur un carton plein d'au moins 76cm*50.6cm et de 3mm d'épaisseur. Les deux bords en traits pleins doivent être superposés aux bords du carton. *Encoller la seconde section, là positionner à côté de la première en veillant à ce que les repères coïncident. *Poursuivre ceci jusqu'à ce que tout le plan soit reconstitué, puis faire de même pour les quatre autres. Les deux derniers peuvent êtres découpés pour utiliser les chutes de cartons. *Laisser sécher quelques heures. *A l'aide d'un cutter et d'une règle découper les pièces une par une sur les très pleins, évider les parties à évider. Les courbes peuvent êtres découpé à la scie à champ tourné. *Pour terminer poncer les bords des pièces découpés. miner poncer les bords des pièces découpés. )
  • OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
  • OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
  • Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
  • Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
  • How to Allow or Block Apple Music Explicit Content  + ('''Step 1.''' Go to '''Settings''' on your'''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
  • How to Clear Tidal Cache on iOS and Android  + ('''Step 1.''' On the Home screen of your A'''Step 1.''' On the Home screen of your Android phone, press and hold the '''Tidal app icon''' until a menu appears. '''Step 2.''' Tap the icon with i to enter the app’s settings. Or you can go to '''Settings''' > '''Apps''' > '''Tidal''' to set up, too. '''Step 3.''' On the detail page, tap '''Storage & cache''' and then '''Clear cache'''.''Storage & cache''' and then '''Clear cache'''.)
  • How to Create Spotify Codes for Sharing with Others  + ('''Step 1.''' Open the Spotify app and tap'''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
  • Poelito - Poêle de masse semi-démontable  + (Le principe du Poelito est de construire uLe principe du Poelito est de construire un poêle rocket dans un bidon. Le fond du bidon est tapissé de mélange isolant. Cela ne dispense pas de poser son poêle sur un support incombustible. La partie inférieure, où le feu se développe, est coulée en béton réfractaire autour d’un coffrage en tubes de carton. Ces tubes forment des réservations creuses : le circuit du feu et de fumées. La partie inférieure constitue la base du foyer. C’est une masse fixe. La moitié supérieure est constituée de tuyaux métalliques amovibles et remplie de sable que l’on peut laisser sur place ou transporter séparément. Le foyer est fermé soit par une plaque de fonte, soit par une plaque vitro céramique, recouvert par le couvercle du bidon en guise de finition. Le conduit d’évacuation est à l’extérieur du bidon. La connexion se fait par un T de raccordement avec tampon de ramonage. La traversée du plafond et la sortie de toit (ou tout ce qui est à l’extérieur de l’habitat) doit obligatoirement être isolée. On voit sur l'image le bas du conduit d’alimentation vertical avec vers le premier plan son cendrier, et vers l’arrière-plan le départ horizontal des flammes : ce premier ensemble constitue le brûleur. A l’arrière-plan on voit les 2 reprises des fumées, une de chaque côté du conduit de départ de flamme. Ces 2 reprises se rejoignent par en dessous via un collecteur, qui envoie les fumées vers l’arrière, en direction de l’évacuation des fumées). Cet ensemble constitue le collecteur. Raccordement au conduit d’évacuation par T avec tampon au conduit d’évacuation par T avec tampon)
  • Wio WM1110: Quick Start Guide for Seamless Integration  + ('''This guide explains the steps to seamle'''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
  • VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you'''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
  • VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you'''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
  • NEXT ENGINE 3D SCANNER :How to use it  + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA'''  5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
  • Découpage Vinyle  + (<div class="icon-instructions caution-i
    Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
    er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
  • Découpage Vinyle  + (<div class="icon-instructions caution-i
    Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
    er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
  • Impression 3D standard  + ( * Direction thingiverse.com * Trouver un STL à son goût (ici un T. Rex) * Le-télécharger <br/> )
  • Design your personal logo with Tinkercad  + ( * Open a new document in tinkercad * Sel * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
  • Librem 5 Case Creating Community  + ( * for advertisement and spreading the word on Purism's blog / news site and on social media * for resources, for example a 3d file of the outer shape of the phone or a basic case file )
  • Comment usiner une pièce avec une défonceuse cnc en toute securite  + ( * Ouvrir logiciel ArtCAM Pro * cree un nouveau modele * inserer le fichier "dxf " creer avec autocad )
  • FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
  • FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
  • Verser vos travaux dans le bien commun de l'humanité  + (Rendues célèbres par wikipedia, un des sitRendues célèbres par wikipedia, un des sites les plus consultés dans le monde, ces licences permettent rapidement et facilement de partager vos travaux, fichiers, modes d'emplois dans le bien commun. Pour cela, nous vous proposons de comprendre les licences proposées sur ce site, et les sigles correspondants : *'''CC''' = '''Creative Commons''' - mise dans le bien commun *'''BY'''='''Mention obligatoire du ou des auteurs''' (BY) *'''SA'''= '''Share Alike''' - réutilisation avec mêmes conditions de partage pour les copies et variantes et "adaptations" *'''NC'''=comme '''Non Commercial'''. Interdit l'usage commercial de la création. Permet par contre la conclusion de contrats de cession de droits au bénéfice des auteurs pour activer ces usages, tout en laissant le contenu partagé. *'''ND'''='''Non Derivative'''. Interdit la création de variantes et adaptations : et donc la création ne peut faire l'objet d'adaptations sans accord de l'auteur. Il existe aussi ici un [https://creativecommons.org/choose/?lang=fr outil en ligne d'affectation de licences creative commons] qui va vous indiquer la licence qui correspond à ce que vous avez choisi.
    rrespond à ce que vous avez choisi. <br/>)
  • Imprimante 3D - Ultimaker 2  + ( * Ouvrir Cura * Cura est gratuit, disponible en ligne )
  • Brodeuse numérique, Singer Futura XL550  + (Lorsque qu'on ouvre Futura le grand tambour s'affiche, dans notre cas nous voulons le petit, puisque qu'au début du tutoriel je vous ai indiqué de prendre le petit tambour. <br/> * Menu "outils" * "Sélectionner" le tambour * "Petit")
  • Tab2Lux  + (Source : https://syskb.com/lecteur-audio-Source : https://syskb.com/lecteur-audio-raspberry-pi-dac/#A4 Temps estimé : 30 minutes en comptant le téléchargement d’une image de 600 MB #Téléchargez la [http://www.runeaudio.com/download/ dernière version de RuneAudio]. Notez que si vous avez un vieux Raspberry Pi, ça le fait !
    #Insérez votre carte Micro SD sur votre PC.
    #Téléchargement d'Etcher : En effet, Etcher est extrêmement simple à utiliser. On le télécharge, l’installe et on le lance. L'avantage de ce logiciel, c'est qu'il peut utiliser une ISO zippé sans devoir la décompresser
    > On choisit l'ISO (1) puis la carte SD de destination (2) et enfin, on lance l'installation (3).
    #Une fois l’installation terminée insérez la carte SD dans le RPi.
    br/> #Une fois l’installation terminée insérez la carte SD dans le RPi. <br/>)
  • Multi-console Raspberry pi 3/zeroW + Tuto PITFT 2.8/3.5/ect  + (- Pour formater la MicroSd rien de plus simple ouvrir SdFormatter -1- Choisir ça MicroSd normalement reconnu auto -2- Puis click sur '''Format''' et voila!! votre MicroSd et bien formater pour recevoir RetroPie.)
  • Plotter de découpe - Caméo Silouhette  + (Préparation de la machine : * Allumage : le bouton situé à droite de la Caméo)
  • Créer une application avec Lora32u4 pour The Things Network  + (1 - Télécharger les fichiers [http://bsfra1 - Télécharger les fichiers [http://bsfrance.fr/documentation/11355_LORA32U4II/driver_windows.zip Driver windows] et [http://bsfrance.fr/documentation/11355_LORA32U4II/BSFrance.zip Arduino Hardware folder] sur la page [https://bsfrance.fr/lora-long-range/1345-LoRa32u4-II-Lora-LiPo-Atmega32u4-SX1276-HPD13-868MHZ-EU-Antenna.html BSFrance] 2 - Pour les drivers, il suffit de dézipper et de cliquer sur adafruit_drivers.exe. Parmi la liste des drivers proposés, il faut choisir Feather32u4 3 - Bon, là, normalement, il est possible de brancher la carte sur le port USB de l'ordinateur.
    Il est possible que vous ayez le message que l'installation du pilote n'a pas été possible. Pas de panique, on y reviendra
    3 - Pour les fichiers Arduino, il faut le dézipper dans le répertoire Mes Documents/Arduino/hardware (ce qui est le répertoire par défaut de l'installation de l'environnement Arduino, mais peut-être différent suivant votre installation. si le sous-répertoire hardware n'existe pas, créez le. Cette bibliothèque sert à gérer le microcontrôleur AT Mega32u4 de la carte. 4 - Démarrez l'IDE Arduino. Vous devriez pouvoir trouver la carte dans le menu Outils > Type de carte > LoRa32u4II 868 5 - Dans l'environnement Arduino, à ce stade on sélectionne le port par le menu Outils > Port, mais s'il y a eu l'erreur d'installation de pilote précédemment mentionnée, le port n'apparait pas. Il faut appuyer sur le bouton reset de la carte et sélectionner à nouveau, dans le laps de temps du reset, le menu Outils > Port. Là normalement le port devrait apparaitre quelques instants et on peut le sélectionner. 6 - Il reste encore à installer un bibliothèque : la bibliothèque LMIC qui contient les fichiers pour le protocole LoraWan. Pour cela il y a 2 méthodes : Méthode 1 : * La première est d'aller dans le menu Croquis > Inclure une bibliothèque > Gérer les bibliothèques. * Dans la barre de recherche, du gestionnaire de bibliothèque, tapez "lmic"
    Si vous ne voyez rien apparaitre, vérifiez que les listes déroulantes Type et Sujet soient bien sur "Tout"
    * Choisissez d'installer le bibliothèque IBM LMIC Framework Méthode 2 : * Téléchargez l'archive du projet GitHub https://github.com/matthijskooijman/arduino-lmic dans le répertoire Mes Documents/Arduino/Libraries. Vous devriez avoir un répertoire arduino-lmic-master 7 - Lorsque cette bibliothèque est bien installée, vous pouvez choisir dans le menu Fichier > Exemples > LMIC-Arduino le sketch ttn-otaa
    Pour faire court, la différence entre les sketches ttn-abp et ttn-otaa vient des deux différentes façon de s'enregistrer sur le réseau The Thing Network (par enregistrement, je parle de l'échange qui a lieu entre notre carte et la passerelle TTN lors de la mise sous tension de la carte) La première est l'Activation By Personalization (ou abp) pour laquelle il faut avoir une adresse réseau de la carte appelée DevAddr) La seconde est l'Over-The-Air-Activation (ou otaa). Dans ce mode DevAddr est transmis automatiquement pendant la phase d'enregistrement.
    (ou abp) pour laquelle il faut avoir une adresse réseau de la carte appelée DevAddr) La seconde est l'Over-The-Air-Activation (ou otaa). Dans ce mode DevAddr est transmis automatiquement pendant la phase d'enregistrement.</div> </div>)
  • Fix Spotify Songs Disappeared  + (1. The original songs and playlists may be1. The original songs and playlists may be deleted by their artist or creator. This mostly happens to the songs or playlists that are grayed out after you've downloaded them to your device. It's probably because that the artist or the creator of these songs or playlists does not want these tracks on Spotify for some reason. See also: Fix [https://www.tuneskit.com/spotify-music-tips/fix-spotify-greyed-out-songs.html Spotify songs greyed out] 2. Something got wrong with your Internet connection when you check or download these downloaded songs in Spotify. While you are saving any track or playlist offline on Spotify, an Internet connection is required. So you should confirm the network runs well when you are downloading the songs or playlists from Spotify. If it is this reason that causes your problem, you should download the songs again with a good internet connection. 3. Your downloads of songs from Spotify exceed the 10,000 number limit. As Spotify only allows Premium users to download up to 10,000 tracks in total, you should check whether you have hit that limit or not. If so, Spotify will delete the previously downloaded songs automatically if it finds you adding some new tracks. Normally, you'll be noticed by Spotify with a warning message once you reached this limit. 4. You may be out of Spotify Premium. So you need to verify your premium membership.  You are required to log into your account online every 30 days even if you use Spotify Offline mode. Otherwise, the downloaded songs would disappear from your Spotify account. In other cases, the previously downloaded songs could become unavailable on Spotify if you changed the region of your VPN network. That's because some Spotify songs are not allowed in certain countries and regions. To get the music back again, you should change your VPN network settings.ck again, you should change your VPN network settings.)
  • Filet à ichtyoplancton - simple arceau  + (<div class="icon-instructions idea-icon
    si vous avez pu récupérer un patron (carton au format de la maille découpée), tracer directement cette forme sur la maille.
    Utilisez un feutre indélébile pour tracer sur la maille.
    Pour chaque étape,regarder la photo correspondante sur la gauche
    Étape 0) Tracer le point A au milieu du petit coté, et A' au milieu de l'autre petit coté. Tracer le segment AA' Étape 1) Marquer le point C sur ce segment, pour que AC = 147,5 cm Étape 2) A l'aide d'un "compas" (un marqueur au bout d'une ficelle) tracer l'arc CB=78,5cm Puis avec la même technique, tracer l'arc AB=167cm A l'intersection des deux arcs: marquer le point B Faire de même de l'autre côté, pour marquer B' Étape 3) Avec la même technique, tracer l'arc BB', de 167cm de rayon (=AB=AB') Étape 4) Faire de même pour l'arc DD' avec un rayon AD=AD'=35cm Étape 5) Marquer ensuite une bordure de 3cm de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.
    de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.)
  • Filet à ichtyoplancton - simple arceau  + (<div class="icon-instructions idea-icon
    si vous avez pu récupérer un patron (carton au format de la maille découpée), tracer directement cette forme sur la maille.
    Utilisez un feutre indélébile pour tracer sur la maille.
    Pour chaque étape,regarder la photo correspondante sur la gauche
    Étape 0) Tracer le point A au milieu du petit coté, et A' au milieu de l'autre petit coté. Tracer le segment AA' Étape 1) Marquer le point C sur ce segment, pour que AC = 147,5 cm Étape 2) A l'aide d'un "compas" (un marqueur au bout d'une ficelle) tracer l'arc CB=78,5cm Puis avec la même technique, tracer l'arc AB=167cm A l'intersection des deux arcs: marquer le point B Faire de même de l'autre côté, pour marquer B' Étape 3) Avec la même technique, tracer l'arc BB', de 167cm de rayon (=AB=AB') Étape 4) Faire de même pour l'arc DD' avec un rayon AD=AD'=35cm Étape 5) Marquer ensuite une bordure de 3cm de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.
    de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.)
  • Roland camm-1 GR-420 - Tutoriel basique  + (<div class="icon-instructions info-icon
    Img 1 : L'épaisseur maximum pour le matériel à travailler est de 2 mm
    Img 2 : L'aire maximale pour la découpe est de 1,075 mm x 24,998 mm
    gt; <div class="icon-instructions-text">Img 2 : L'aire maximale pour la découpe est de 1,075 mm x 24,998 mm</div> </div>)
  • Thermoformeuse Formech 450DT  + (<div class="icon-instructions info-icon
    Dimensions de formage : 430 x 280mm Taille de la feuille : 450 x 300 mm Profondeur max. de formage : 160 mm Épaisseur max. de la feuille : 6mm Zone de chauffe : 4 Type de chauffe : Quartz
    e la feuille : 6mm Zone de chauffe : 4 Type de chauffe : Quartz</div> </div>)
  • Thermoformeuse Formech 450DT  + (<div class="icon-instructions info-icon
    Dimensions de formage : 430 x 280mm Taille de la feuille : 450 x 300 mm Profondeur max. de formage : 160 mm Épaisseur max. de la feuille : 6mm Zone de chauffe : 4 Type de chauffe : Quartz
    e la feuille : 6mm Zone de chauffe : 4 Type de chauffe : Quartz</div> </div>)
  • Roland camm-1 GR-420 - Tutoriel basique  + (<div class="icon-instructions info-icon
    Img 1 : L'épaisseur maximum pour le matériel à travailler est de 2 mm
    Img 2 : L'aire maximale pour la découpe est de 1,075 mm x 24,998 mm
    gt; <div class="icon-instructions-text">Img 2 : L'aire maximale pour la découpe est de 1,075 mm x 24,998 mm</div> </div>)
  • Bartop Arcade 2 joueurs  + (Boutiques faboulousarcade http://ebay.to/2Boutiques faboulousarcade http://ebay.to/2gKd1zy Cette étape est la plus longue et fastidieuse du tuto. Armez-vous donc de patience, car c'est tout ce dont vous aurez besoin à cette étape. Rien n'est compliqué dans ces branchements mais je vous conseille toutefois de repérer chaque boutons y compris ceux des joysticks (haut, bas, gauche et droite) à l'arrière du panel. Cela vous facilitera grandement la tâche lorsque vous raccorderez le tout. La première étape consiste à relier tous les boutons entre eux à l'aide d'un câble commun. Partez donc du connecteur (commun) d'un des boutons et reliez le au suivant et ainsi de suite. Pour finir, branchez la dernière cosse sur un des ports GROUND de l'interface USB ou du Raspberry Pi. Il y plusieurs solutions pour connecter les boutons et les joysticks sur un Raspberry pi : utiliser une interface USB (souvent vendu avec le kit) ou les ports GPIOs du Raspberry Pi. Dans mon cas, j'ai utilisé l'interface USB et ai raccordé le tout au Raspberry pi. Une fois que tous les boutons et joysticks sont reliés au port GROUND par un câble commun, il suffit de relier chacun des boutons au port correspondant sur le Raspberry ou l'interface USB. Le plus compliqué dans cette étape, c'est de réussir à faire quelque chose de propre. En effet, essayez de ne pas faire passer les câbles trop près des joysticks pour éviter d'en couper un !!! Vidéo pour mieux comprendre : https://www.youtube.com/watch?v=x6Ry4bOWcR8 Pour ceux qui utilisent les ports GPIO du Raspberry, il faut penser à activer les ports GPIO dans le fichier de configuration. Recalbox possède un outil de configuration avancée nommé recalbox.conf qui vous permet de modifier des options qui ne sont pas disponibles dans emulationstation. Pour le modifier, allez dans le dossier de recalbox partagé sur le réseau local. Le fichier recalbox.conf est disponible dans le répertoire nommé system. Dans recalbox.conf, activez le pilote GPIO en réglant controllers.gpio.enabled sur 1 : controllers.gpio.enabled=1 et vous êtes prêt à jouer !gpio.enabled=1 et vous êtes prêt à jouer !)
  • Bartop Arcade 2 joueurs  + (Boutiques faboulousarcade http://ebay.to/2Boutiques faboulousarcade http://ebay.to/2gKd1zy Cette étape est la plus longue et fastidieuse du tuto. Armez-vous donc de patience, car c'est tout ce dont vous aurez besoin à cette étape. Rien n'est compliqué dans ces branchements mais je vous conseille toutefois de repérer chaque boutons y compris ceux des joysticks (haut, bas, gauche et droite) à l'arrière du panel. Cela vous facilitera grandement la tâche lorsque vous raccorderez le tout. La première étape consiste à relier tous les boutons entre eux à l'aide d'un câble commun. Partez donc du connecteur (commun) d'un des boutons et reliez le au suivant et ainsi de suite. Pour finir, branchez la dernière cosse sur un des ports GROUND de l'interface USB ou du Raspberry Pi. Il y plusieurs solutions pour connecter les boutons et les joysticks sur un Raspberry pi : utiliser une interface USB (souvent vendu avec le kit) ou les ports GPIOs du Raspberry Pi. Dans mon cas, j'ai utilisé l'interface USB et ai raccordé le tout au Raspberry pi. Une fois que tous les boutons et joysticks sont reliés au port GROUND par un câble commun, il suffit de relier chacun des boutons au port correspondant sur le Raspberry ou l'interface USB. Le plus compliqué dans cette étape, c'est de réussir à faire quelque chose de propre. En effet, essayez de ne pas faire passer les câbles trop près des joysticks pour éviter d'en couper un !!! Vidéo pour mieux comprendre : https://www.youtube.com/watch?v=x6Ry4bOWcR8 Pour ceux qui utilisent les ports GPIO du Raspberry, il faut penser à activer les ports GPIO dans le fichier de configuration. Recalbox possède un outil de configuration avancée nommé recalbox.conf qui vous permet de modifier des options qui ne sont pas disponibles dans emulationstation. Pour le modifier, allez dans le dossier de recalbox partagé sur le réseau local. Le fichier recalbox.conf est disponible dans le répertoire nommé system. Dans recalbox.conf, activez le pilote GPIO en réglant controllers.gpio.enabled sur 1 : controllers.gpio.enabled=1 et vous êtes prêt à jouer !gpio.enabled=1 et vous êtes prêt à jouer !)
  • Geiger counter 12+  + (<u>https://world-nuclear.org/nuclearhttps://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
  • Bentolux - BentoGhooost  + (= Fabrication 3ème étage = 1. Fabrication = Fabrication 3ème étage = 1. Fabrication à la découpeuse laser. * Plan à télécharger : [https://wikifab.org/images/d/df/BentoGhost_volume1.svg BentoGhost_volume1.svg] (clic droit / enregistrer le fichier sous) 2. Découpage et collage des morceaux * Bien penser à supprimer les écritures permettant d'identifier les faces avant la découpe * Bois utilisé : contreplaqué peuplier 3 mm * Réglages utilisés sur la PerezCamp 140 W ** puissance max : 40 % ** puissance min : 30 % ** vitesse : 40 mm / s * L'assemblage est expliqué avec les photos BentoGhost02 à BentoGhost04 ** Coller les éléments avec de la colle à bois * ''Le plancher qui supporte le mécanisme est décrit à l'étape suivante'' 3. Découpe des fantômes, dans du plexiglas 3 mm * Plan à télécharger : [https://wikifab.org/images/b/b9/BentoGhost_fantomes.svg BentoGhost_fantomes.svg] (clic droit / enregistrer le fichier sous) * Remarque : les 4 fantômes découpés dans la boite sont en haut de dessin, mais vous pouvez sélectionner ceux que vous voulez à partir du moment où ils sont de la même forme que ceux de la boîte * L'assemblage est expliqué avec les photos BentoGhost05 à BentoGhost07 ** Remarque : les fantômes peuvent également être collés à la colle à bois. Il faut bien les nettoyer tout de suite pour ne pas avoir de résidus de colle sur le plexiglas.voir de résidus de colle sur le plexiglas.)
  • Thermostat control activity v12  + (== What you need[https://docs.google.com/d== What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
  • Costruzione del robot ABC  + (<div class="mw-translate-fuzzy"> Iniziamo prendendo la base aggiungendo il supporto con la batteria collegata ai 3 LED verdi. </div> <div class="mw-translate-fuzzy"> Prendere 4 viti M4 e inserirle nei 4 fori e fissare 1 dado su ciascuna vite. </div>)
  • BentoGhost  + (=Fabrication 3ème étage= 1. Fabrication à =Fabrication 3ème étage= 1. Fabrication à la découpeuse laser. *Plan à télécharger : [https://wikifab.org/images/d/df/BentoGhost_volume1.svg BentoGhost_volume1.svg] (clic droit / enregistrer le fichier sous) 2. Découpage et collage des morceaux *Bien penser à supprimer les écritures permettant d'identifier les faces avant la découpe *Bois utilisé : contreplaqué peuplier 3 mm *Réglages utilisés sur la PerezCamp 140 W **puissance max : 40 % **puissance min : 30 % **vitesse : 40 mm / s *L'assemblage est expliqué avec les photos BentoGhost02 à BentoGhost04 **Coller les éléments avec de la colle à bois * ''Le plancher qui supporte le mécanisme est décrit à l'étape suivante'' 3. Découpe des fantômes, dans du plexiglas 3 mm *Plan à télécharger : [https://wikifab.org/images/b/b9/BentoGhost_fantomes.svg BentoGhost_fantomes.svg] (clic droit / enregistrer le fichier sous) *Remarque : les 4 fantômes découpés dans la boite sont en haut de dessin, mais vous pouvez sélectionner ceux que vous voulez à partir du moment où ils sont de la même forme que ceux de la boîte *L'assemblage est expliqué avec les photos BentoGhost05 à BentoGhost07 **Remarque : les fantômes peuvent également être collés à la colle à bois. Il faut bien les nettoyer tout de suite pour ne pas avoir de résidus de colle sur le plexiglas.voir de résidus de colle sur le plexiglas.)
  • FLAC Joiner to Join FLAC Files in Original Quality  + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
  • How to Play Amazon Music on Google Home  + (After downloading and installing of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Converter], double-tap to start it. Next, you will be navigated to the Amazon Music web player. Locate the "Sign In" option to access your Amazon account.)
  • How to Add Spotify Music to GoPro Quik  + (After downloading and installing AudFree [After downloading and installing AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Playlist Converter], run it and the Spotify app will automatically launch. Find your required Spotify tracks, copy the link, paste it in the search box of AudFree, and click "+" icon to load up.of AudFree, and click "+" icon to load up.)
  • Guide on how to Permanently Add Subtitles to MP4  + (After downloading and installing Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner], run it. Then you can add MP4 files to Joyoshare with 2 ways: Drag and drop MP4 video to the left screen; Select from the local folder.)
  • Manipulate the CubePro Trio  + (After downloading the program and installing it using it's serial number and activating it, we must launch the program.)
  • How to Download and Convert Spotify Music to MP3  + (After launching '''Tunelf Spotibeat Music After launching '''Tunelf Spotibeat Music Converter''', it will load the Spotify app automatically on your computer. Then browse the music library to find out the song or playlist you want to download. You can choose to drag them to Tunelf interface or copy the link of Spotify music to the search box on Tunelf interface.sic to the search box on Tunelf interface.)
  • Play Tidal Songs on Roku TV  + (After the download and installation of theAfter the download and installation of the TuneCable program. Run it and choose a download mode from the main interface. The app mode needs the TIDAL app to run and can save up to Tidal Max (up to 24-bit/192kHz) music at 5x or 1x (for Mac) the speed, while the web player mode works via the built-in Tidal web player and can retain Tidal High (16-bit/44.1kHz) quality music at 10x fast speed. Pick the one you prefer, and sign in to your Tidal Free, HiFi, or HiFi Plus account.ur Tidal Free, HiFi, or HiFi Plus account.)
  • Tidal Alexa - How to Add Tidal to Alexa  + (After the installation, please double-clicAfter the installation, please double-click to start [https://www.audfree.com/tidal-music-converter-win/ AudFree Tidal Music Downloader]. And then, the Tidal app will open automatically. Find Tidal songs that you want to play on Alexa, copy and paste the link of Tidal track in the search bar of AudFree's main interface, and click "+" for loading.main interface, and click "+" for loading.)
  • Démarrage CNC MEKANIKA  + (Allumer la multiprise L'écran s'allume Appuyer ensuite sur le bouton ON/OFF situé à l’arrière du boitier électronique. L'ordinateur démarre et affiche le système. Démarrer Planet CNC)
  • Best Method to Upload Apple Music to Dropbox  + (Apple Music songs are protected. FortunateApple Music songs are protected. Fortunately, with today's technology, you are just a few clicks away to get all protection-free music files by a tool such as TunesKit [https://www.tuneskit.com/audio-converter/ Apple Music Converter], which is a top-notch converting tool in the market. It supersedes other tools by integrating the fast and lossless converting technology plus multiple formats and device compatibility so as to promise the ultimate user experience. After the conversion, you can also [https://www.tuneskit.com/apple-music-tips/transfer-apple-music-to-google-drive.html play Apple Music on Google Drive] or other clouds easily.lay Apple Music on Google Drive</u>] or other clouds easily.)
  • How to Play Spotify to Yoto Player without Premium  + (<nowiki>Once the Spotify music you wOnce the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music.


    '''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.

    '''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.

    '''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.

    '''Step 4.''' Select ''''Add Audio'''' from the options.

    '''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.

    '''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).

    '''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.

    '''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.


    ' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.<br /><br /><br/></nowiki>)
  • Lossless FLAC Splitter to Split FLAC in Original Quality  + (Based on your system, select the proper veBased on your system, select the proper version of Joyoshare [https://www.joyoshare.com/video-cutter-win/ audio splitter] to download and install. Then, open the program and go to "Open" to access your local folder and choose the FLAC file to it. Or, you can drag and drop the FLAC audio file to the specified position to start.o file to the specified position to start.)
  • ESP32 MQTT  + (<nowiki>Copy the full code into yourCopy the full code into your IDE. Feel free to change things like the text it prints, etc


     1 #include 
    2 #include
    3
    4 // WiFi
    5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
    6 const char *password = "xxxxx"; // Enter Wi-Fi password
    7
    8 // MQTT Broker
    9 const char *mqtt_broker = "broker.emqx.io";
    10 const char *topic = "emqx/esp32";
    11 const char *mqtt_username = "emqx";
    12 const char *mqtt_password = "public";
    13 const int mqtt_port = 1883;
    14
    15 WiFiClient espClient;
    16 PubSubClient client(espClient);
    17
    18 void setup() {
    19 // Set software serial baud to 115200;
    20 Serial.begin(115200);
    21 // Connecting to a WiFi network
    22 WiFi.begin(ssid, password);
    23 while (WiFi.status() != WL_CONNECTED) {
    24 delay(500);
    25 Serial.println("Connecting to WiFi..");
    26 }
    27 Serial.println("Connected to the Wi-Fi network");
    28 //connecting to a mqtt broker
    29 client.setServer(mqtt_broker, mqtt_port);
    30 client.setCallback(callback);
    31 while (!client.connected()) {
    32 String client_id = "esp32-client-";
    33 client_id += String(WiFi.macAddress());
    34 Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
    35 if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
    36 Serial.println("Public EMQX MQTT broker connected");
    37 } else {
    38 Serial.print("failed with state ");
    39 Serial.print(client.state());
    40 delay(2000);
    41 }
    42 }
    43 // Publish and subscribe
    44 client.publish(topic, "Hi, I'm ESP32 ^^");
    45 client.subscribe(topic);
    46 }
    47
    48 void callback(char *topic, byte *payload, unsigned int length) {
    49 Serial.print("Message arrived in topic: ");
    50 Serial.println(topic);
    51 Serial.print("Message:");
    52 for (int i = 0; i < length; i++) {
    53 Serial.print((char) payload[i]);
    54 }
    55 Serial.println();
    56 Serial.println("-----------------------");
    57 }
    58
    59 void loop() {
    60 client.loop();
    61 }
    i">0</span><span class="p">;</span> <span class="n">i</span> <span class="o"><</span> <span class="n">length</span><span class="p">;</span> <span class="n">i</span><span class="o">++</span><span class="p">)</span> <span class="p">{</span><br /><span class="lineno">53 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">print</span><span class="p">((</span><span class="kt">char</span><span class="p">)</span> <span class="n">payload</span><span class="p">[</span><span class="n">i</span><span class="p">]);</span><br /><span class="lineno">54 </span> <span class="p">}</span><br /><span class="lineno">55 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">();</span><br /><span class="lineno">56 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">(</span><span class="s">"-----------------------"</span><span class="p">);</span><br /><span class="lineno">57 </span><span class="p">}</span><br /><span class="lineno">58 </span><br /><span class="lineno">59 </span><span class="kt">void</span> <span class="nf">loop</span><span class="p">()</span> <span class="p">{</span><br /><span class="lineno">60 </span> <span class="n">client</span><span class="p">.</span><span class="n">loop</span><span class="p">();</span><br /><span class="lineno">61 </span><span class="p">}</span><br /></pre></div></nowiki>)
  • Build a Longboard from Scratch in Your Own Home  + (Before you start putting together your lonBefore you start putting together your longboard, you'll need to do some cutting and drilling. Begin by cutting your threaded rods into two pieces, each 8 inches long. Use a fret file to smooth out the rods, which are 5/16" x 12" inches in size. Next, apply grip tape to the board. Cut the grip tape to be about one centimeter wider than the board, then press it onto the board and trim off any excess. With your 6º wedge riser, mark where you'll drill to attach the INOX Allen bolts, which are 1/4" x 1.5" in size. Ensure the marks are centered on the ends of your board. Safety is crucial, so wear gloves and safety glasses during this process. Carefully drill four holes, making sure they are clean and precise. We used a 3D-printed part to help us drill the holes in the cap perfectly centered. If you'd like access to the design for this part, please let us know, and we'll share it with you. Finally, position the drill in the middle of your 1" cap and drill each hole carefully. The 1" cap should have a similar appearance to the one shown in the image. appearance to the one shown in the image.)
  • Modélisation 3D  + (Enfin, selon les performances de la statioEnfin, selon les performances de la station de travail que l'on utilise, on choisira l'outil adapté. Par exemple, pour utiliser SolidWorks, la station de travail nécessite des [http://www.solidworks.fr/sw/support/8926_FRA_HTML.htm caractéristiques techniques poussés]. A l'inverse, FreeCAD demande moins de ressources. L'outil OnShape s'utilise sur navigateur sans installation (le rendant alors utilisable quelque soit le système d'opération)sable quelque soit le système d'opération))
  • Modélisation 3D  + (Enfin, selon les performances de la statioEnfin, selon les performances de la station de travail que l'on utilise, on choisira l'outil adapté. Par exemple, pour utiliser SolidWorks, la station de travail nécessite des [http://www.solidworks.fr/sw/support/8926_FRA_HTML.htm caractéristiques techniques poussés]. A l'inverse, FreeCAD demande moins de ressources. L'outil OnShape s'utilise sur navigateur sans installation (le rendant alors utilisable quelque soit le système d'opération)sable quelque soit le système d'opération))
  • Tinkercad - Visite guidée  + (Cette image résume bien la facilité de l'application)
  • How to Play Spotify through VLC Media Player  + (Click the software icon to launch this tooClick the software icon to launch this tool and Spotify app from your computer desktop. Now, there are two ways to import Spotify playlists to AudFree Software. You can drag and drop Spotify files from Spotify to this program. Or you can copy and paste its URL of Spotify music to AudFree's search box and then press the '+' button to confirm it.d then press the '+' button to confirm it.)
  • Quizmaster avec mBlock et Arduino  + (Connectez dans mBlock. *Allez dans le menuConnectez dans mBlock. *Allez dans le menu connecter, par port série. Sélectionne le COM disponible *Allez dans le menu choix de la carte, sélectionnez l’Arduino UNO *Allez dans le menu connecter, téléverser le microprogramme de communication Utilisez un petit programme pour tester les boutons. Dans pilotage, allez chercher l'instruction ''mettre l'état logique de la broche ... à haut/bas''. Si on clique sur le drapeau vert, la lumière du bouton A doit s'allumer. Réessayez pour les boutons B et C.llumer. Réessayez pour les boutons B et C.)
  • Quizmaster avec mBlock et Arduino  + (Connectez dans mBlock. *Allez dans le menuConnectez dans mBlock. *Allez dans le menu connecter, par port série. Sélectionne le COM disponible *Allez dans le menu choix de la carte, sélectionnez l’Arduino UNO *Allez dans le menu connecter, téléverser le microprogramme de communication Utilisez un petit programme pour tester les boutons. Dans pilotage, allez chercher l'instruction ''mettre l'état logique de la broche ... à haut/bas''. Si on clique sur le drapeau vert, la lumière du bouton A doit s'allumer. Réessayez pour les boutons B et C.llumer. Réessayez pour les boutons B et C.)
  • Musical e-textile bag  + (Connect one end of the micro USB cable to Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
  • Musical e-textile bag  + (Connect one end of the micro USB cable to Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
  • E-textile blinking bag  + (Connect one end of the micro usb cable to Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
  • E-textile blinking bag  + (Connect one end of the micro usb cable to Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
  • Connected weather station  + (Connect the sensors as follows: '''Light Connect the sensors as follows: '''Light sensor''' One end to 3V the other end to the 10kohm resistor which in turn is connected to GND. the same end of the LDR is also connected to pin D34 on the ESP32 '''CJMCU CCS811''' 3V →3V on the ESP32 board GND→ GND SDA→D21 pin on ESP32 SCL→D22 pin on ESP32 WAKE→GND '''DHT11''' GND→GND on ESP32 VCC→3V on ESP32 OUT→D34 on ESP32n ESP32 VCC→3V on ESP32 OUT→D34 on ESP32)
  • Fab'tiquette  + (Connectez-vous à l’adresse suivante pour aConnectez-vous à l’adresse suivante pour accéder à notre générateur de modèles de fichiers personnalisables : https://shapediver.com/m/fab-tiquette-2 Vous avez 2 options pour créer vos Fab’tiquettes. * '''Option 1''' : télécharger notre fichier .dxf pour le reproduire le modèle de fab’tiquettes à l’identique. Renseignez l’épaisseur et la dimension du matériau dans le formulaire. Cliquez sur le Bouton « ShapeDiverExportDownload » pour télécharger le fichier .dxf prêt pour la découpe laser (pour accéder à ce bouton, déroulez jusqu’en bas le menu des paramètres de réglages). * '''Option 2''' : créez vos propres modèles sur mesure en personnalisant notre fichier .dxf. Donnez libre court à votre créativité et créez votre propre modèle de fab’tiquettes en jouant sur les paramètres de personnalisation du design. Vous verrez s’afficher instantanément le résultat de vos réglages personnels. Renseignez l’épaisseur du matériau dans le formulaire. Cliquez sur le Bouton « ShapeDiverExportDownload » pour télécharger le fichier .dxf prêt pour la découpe laser (pour accéder à ce bouton, déroulez jusqu’en bas le menu des paramètres de réglages)en bas le menu des paramètres de réglages))
  • Fab'tiquette  + (Connectez-vous à l’adresse suivante pour aConnectez-vous à l’adresse suivante pour accéder à notre générateur de modèles de fichiers personnalisables : https://shapediver.com/m/fab-tiquette-2 Vous avez 2 options pour créer vos Fab’tiquettes. * '''Option 1''' : télécharger notre fichier .dxf pour le reproduire le modèle de fab’tiquettes à l’identique. Renseignez l’épaisseur et la dimension du matériau dans le formulaire. Cliquez sur le Bouton « ShapeDiverExportDownload » pour télécharger le fichier .dxf prêt pour la découpe laser (pour accéder à ce bouton, déroulez jusqu’en bas le menu des paramètres de réglages). * '''Option 2''' : créez vos propres modèles sur mesure en personnalisant notre fichier .dxf. Donnez libre court à votre créativité et créez votre propre modèle de fab’tiquettes en jouant sur les paramètres de personnalisation du design. Vous verrez s’afficher instantanément le résultat de vos réglages personnels. Renseignez l’épaisseur du matériau dans le formulaire. Cliquez sur le Bouton « ShapeDiverExportDownload » pour télécharger le fichier .dxf prêt pour la découpe laser (pour accéder à ce bouton, déroulez jusqu’en bas le menu des paramètres de réglages)en bas le menu des paramètres de réglages))
  • Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
  • Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
  • Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
  • Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
  • Infinity Gauntlet Salad Tongs  + (Create the vector graphics for the InfinitCreate the vector graphics for the Infinity Gauntlet in Adobe Illustrator. Find a reference image online and use the Magnetic Lasso tool to trace around key elements of the image. We wanted the glove to have a layered and 3d look, so he traced out the base shape of the glove and used other gauntlet elements as vertical accents.her gauntlet elements as vertical accents.)
  • Infinity Gauntlet Salad Tongs  + (Create the vector graphics for the InfinitCreate the vector graphics for the Infinity Gauntlet in Adobe Illustrator. Find a reference image online and use the Magnetic Lasso tool to trace around key elements of the image. We wanted the glove to have a layered and 3d look, so he traced out the base shape of the glove and used other gauntlet elements as vertical accents.her gauntlet elements as vertical accents.)
  • Cylindre axe pour pompe de piscine impression 3D avec CURA  + (Créer un compte sur Onshape, logiciel de dCréer un compte sur Onshape, logiciel de dessin 3D gratuit en ligne. ouvrir un nouveau projet, sélectionner le plan sur lequel sera dessiné la forme de base, ici, un cercle auquel on donnera du volume. Pour cela, une fois le plan de dessin sélectionné, choisir "esquisse" et dessiner le cercle à la cote désirée. Un fois le cercle dessiné, le sélectionner puis cliquer sur la commende "extruder". Définir la profondeur souhaitée pour le volume. Le cylindre est dessiné, Il faut maintenant l'exporter en faisant clic droit sur l'objet puis exporter. Dans notre cas, l'export se fait en format STL
    cas, l'export se fait en format STL <br/>)
  • Comment traiter une image pour Micro perforation au Laser (Demi-ton)  + (Suivant l'image choisi (et votre perfectioSuivant l'image choisi (et votre perfectionnisme :) ) tous les dégradés sont à traiter avec la méthode précédente. * Conversion d'un vecteurs en ellipse (En sélectionnant une nuance de gris en dessous puis créez une ellipse de taille inférieure -> - 0,05mm par exemple) * Application du style graphique Ellipse (En jouant avec la tolérance de sélection de l'outil baguette magique avec un double clique sur ce dernier)magique avec un double clique sur ce dernier))
  • Utilisation Ultimaker 2+  + (Cura est ce qu'on appelle un slicer ; c'esCura est ce qu'on appelle un slicer ; c'est un logiciel qui sert à "trancher" votre fichier 3D pour que l'imprimante puisse l'imprimer. * Allez sur ce site : https://ultimaker.com/en/products/cura-software * Cliquez sur download for free. * un questionnaire va s'ouvrir vous demandant à quoi va servir Cura, si vous ne voulez pas vous embêter à répondre cliquez sur I don't want to share any information * une fois le logiciel téléchargé, lancez l'instalation logiciel téléchargé, lancez l'instalation)
  • Fibonacci Clock  + (Cut 4 plywood board for outside walls, 2 oCut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
  • SolarOSE - Guide 4: Skeleton of the receiver  + (Cut the 30x30x2300 mm square tube. Drill the fixation holes of the tepee. Drill and tap at 5 mm diameter the fixation holes of the junction.)
  • SunZilla - Guide 1: Preparing the aluminium profiles  + (Cut the aluminum profiles according to the technical drawings in the attached PDFs. Once you have them in hand, the first step is to file the ends of the profiles to deburr them, as shown in the picture.)
  • Spinning Kinetic Sculpture RGB  + (Cut the first svg file on 2 sheets of 300cCut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
  • SolarOSE - Guide 7: Assembling of the receiver  + (Cut the squared tube at a length of 2.2 m. Put the 10 hangers on the squared tube, with a spacing of 22 cm.)