Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.
Liste de résultats
- PiKon telescope + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
- Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing + (The [https://www.seeedstudio.com/60GHz-mmW … The [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
- Fruit piano + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
- Fruit piano + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
- Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
- Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
- Escooterfix - Relace mainboard any Xiaomi Mi electric scooter + (The battery connects to the ESC via a '''yellow XT30 plug''', carefully pull this out)
- Escooterfix - Remove the bottom plate, battery protection Xiaomi electric scooter + (The battery cover is secured with '''twent … The battery cover is secured with '''twenty-one torx 10''' bolts. Removing them by hand can take a while but with a quality driver bit you can use a low-torque electric screwdriver to help. The bolts on the leading edge of the deck may be burred up depending how aggressively the scooter has been ridden over kerbs or rocks.ooter has been ridden over kerbs or rocks.)
- Buzzing Bee Circuit + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link
This CAD will need to be saved as a .stl file
Open the .stl file in the printer software for your printer
After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
created file to the printer. PRINT! <br/>) - DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
- DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
- Choosing the Right Smart Glass for Any Project + (The first thing to consider when thinking … The first thing to consider when thinking about adopting this revolutionizing glass technology is to look for a reliable product to use. Do you need smart glass or smart film? There is a difference between the two products. It is important that people who want to invest in switchable technology know the differences. This way they can be confident that they have the appropriate and best value solution for their application. The basic difference is that smart film is retrofit, customized, and can be installed in minutes.stomized, and can be installed in minutes.)
- Choosing the Right Smart Glass for Any Project + (The first thing to consider when thinking … The first thing to consider when thinking about adopting this revolutionizing glass technology is to look for a reliable product to use. Do you need smart glass or smart film? There is a difference between the two products. It is important that people who want to invest in switchable technology know the differences. This way they can be confident that they have the appropriate and best value solution for their application. The basic difference is that smart film is retrofit, customized, and can be installed in minutes.stomized, and can be installed in minutes.)
- How to Combine Clips in iMovie + (The first thing to do is running iMovie on your Mac computer. Then you need to click on "File" and choose "New Project" to begin a new project. After that, you can name the project and adjust some settings according to your desires.)
- Colorado Top Bar Assembly + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
- DIY Makey Makey with Arduino Leonardo + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
- Arduino to ThingSpeak via SIM800 No Wi-Fi + (The legacy project documents that were ori … The legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
- 3D printed geometry connectors + (The objects we have prototyped are several … The objects we have prototyped are several different 3D printed geometrical straw connectors, allowing the construction of different geometrical shapes. They are easily done and cost-effective: it takes about 15 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, mathematics and geometry teachers, or even pupils/ students, under appropriate supervision./ students, under appropriate supervision.)
- Straw connectors + (The objects we have prototyped are several … The objects we have prototyped are several different 3D printed straw connectors, allowing the construction of different shapes. They are easily done and cost-effective: it takes about 5 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, teachers, educators, parents and even children, under appropriate supervision. The straw connectors designs can be downloaded from [https://www.thingiverse.com/thing:11255 here]..thingiverse.com/thing:11255 <u>here</u>].)
- Straw connectors + (The objects we have prototyped are several … The objects we have prototyped are several different 3D printed straw connectors, allowing the construction of different shapes. They are easily done and cost-effective: it takes about 5 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, teachers, educators, parents and even children, under appropriate supervision. The straw connectors designs can be downloaded from [https://www.thingiverse.com/thing:11255 here]..thingiverse.com/thing:11255 <u>here</u>].)
- 3D printed geometry connectors + (The objects we have prototyped are several … The objects we have prototyped are several different 3D printed geometrical straw connectors, allowing the construction of different geometrical shapes. They are easily done and cost-effective: it takes about 15 minutes of printing to achieve one item. It is possible to modify the design in order to adapt it to different straw diameters, and to different numbers of connected straws. These 3D printed straw connectors can be printed by designers, amateurs, mathematics and geometry teachers, or even pupils/ students, under appropriate supervision./ students, under appropriate supervision.)
- OpenKnit: digital fabrication tool to create your own clothes + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
- Ultimate Guide to Fix Tidal Not Playing Songs + (The tidal app for music streaming is now a … The tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
- How to Play Spotify on Yoto Player + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
- Grown your own fabric with bacteria + (This first step lasts about 1h.)
- How to Make Your Own Easter Egg + (This is one of the best bis of crafting yo … This is one of the best bis of crafting your Easter egg! Make sure that you have invested in some high quality and luxurious cooking chocolate before beginning! Pour some water into a pan and bring to the boil. Meanwhile, make sure that your chocolate is cut up into small chunks ready to melt. Once the water is boiling, balance a ceramic bowl on top of the pan and add your chocolate chunks to it. Keep stirring the chocolate as it melts. Yum!p stirring the chocolate as it melts. Yum!)
- E-Textile Monster + (This is where you need to decide what shap … This is where you need to decide what shape you want your monster to be and what components it will include. You need to make sure there is room for each of your components and the battery pack as well as decide where you want to squeeze the monster for the components to turn on. TIP: do not make your monster too big making your circuit components too spread out! Otherwise you will spend a long time sewing to connect the components together sewing to connect the components together)
- Node Red with MQTT on Raspberry Pi + (This project works without much additional hardware. The one and only requirement is you just need a Raspberry Pi.)
- 8bits & Chocolate - decorative candy dispenser + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
- Design a 3D object in Tinkercad + (This video takes the educator through the … This video takes the educator through the basics of Tinkercad. You will learn about designing simple solids (ex. cubes, tetrahedrons), and combining them together to produce a complex object https://openclassrooms.com/courses/imprimante-3d/modelisez-un-objet-en-3d#/id/video_Player_0/modelisez-un-objet-en-3d#/id/video_Player_0</u>)
- How to Listen to Tidal on Multiple Devices Simultaneously + (Tidal offers several major plans for you t … Tidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month.
# If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days.
# If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus.
# To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family.
# After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
'' from Family Hi-Fi or Hi-Fi Plus. <br/>) - How to Play Tidal on Galaxy Watch + (To begin using Tidal on your Galaxy Watch, … To begin using Tidal on your Galaxy Watch, you'll need to download and install the Tidal app. Follow these steps to get started:
'''Step 1: Open the Galaxy Wearable App'''
First, open the Galaxy Wearable app on your smartphone. This app allows you to manage and install applications on your Galaxy Watch.
'''Step 2: Find and Install the Tidal App'''
In the Galaxy Wearable app, navigate to the "Galaxy Store" section. Search for the Tidal app using the search bar and select it from the search results. Tap on "Install" to begin the installation process.
'''Step 3: Sign in to your Tidal Account'''
Once the Tidal app is installed on your Galaxy Watch, open it, and sign in using your Tidal account credentials. If you don't have a Tidal account yet, you can create one directly from the app.
n create one directly from the app. <br/>) - Snap circuits activities for 12+ + (To begin with, kids will need to build or … To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
- How to Download Spotify Podcast to MP3 in 2024 + (Now, let's walk through the stepwise guide … Now, let's walk through the stepwise guide on how to download your favorite Spotify podcasts to MP3 using the AudFun Spotify Music Converter: Step 1. Go to [https://www.audfun.com/ AudFun.com] and install this software on a Windows or Mac. Step 2. '''Drag and drop''' the episodes or the whole podcast from the Spotify app to the screen of AudFun to load all episodes. Step 3. Tap on the top-right '''Menu''' tab and pick '''Preferences''' > '''Convert'''. Then you can select the '''Format''' as MP3 and customize the '''Bit Rate''' as 320kbps. Step 4. Once set, hit the '''Convert''' button at the bottom right on AudFun. This software will work at 5X to download all added podcasts in batches to MP3.ownload all added podcasts in batches to MP3.)
- How to Play Apple Music Soundtrack in GTA5 + (To enjoy your Apple Music library while pl … To enjoy your Apple Music library while playing GTA 5, you'll first need to convert your Apple Music tracks into a compatible format. The best tool for this job is [https://www.audfree.com/auditior AudFree Apple Music Converter]. This powerful software allows you to convert Apple Music songs into formats like MP3 or M4A, making them compatible with GTA 5. Here's why AudFree Apple Music Converter stands out: 1) '''Convert encrypted Apple Music content to various formats:''' AudFree Apple Music Converter can convert all content from Apple Music to unprotected MP3, FLAC, WAV, AAC, M4A, and M4B files. 2) '''Keep lossless audio quality:''' This expert tool ensures that your tracks are converted with the original quality audio, preserving the integrity of your music. 3) '''Support batch conversion at 30X speed:''' The software is user-friendly, and the conversion process is quick at up to 30X faster speed. It enables you to convert unlimited number of tracks together. 4) '''Preservation of Metadata Info:''' It retains important song metadata information. With it, ID3 tags such as artist, album, and cover art will be retained, ensuring your GTA 5 experience is as immersive as possible. 5) '''Play Apple Music without premium:''' Once converted, you can keep the Apple Music conversions forever. That means you can play those unprotected Apple Music audio files at all devices and players whenever you like.io files at all devices and players whenever you like.)
- Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
- Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
- Timelapes with Raspberry Pi Camera + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
- SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step). a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
- SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step). a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
- How to Make Beautiful but Easy Handmade Valentine's Day Card + (To make this beautiful card I used half-in … To make this beautiful card I used half-inch ribbon to make roses. I fold it like a triangle shape then twist it two or three times to make the center. Then our next step is to start twisting but you still have to roll the ribbon, then you have to do it every so often when you're going to twist the ribbon.ten when you're going to twist the ribbon.)
- Casse brique game Maker + (Comme pour les sprites, vous allez devoir … Comme pour les sprites, vous allez devoir créer un objet par élément de votre jeu. Nous allons d'abords créer chaque objet (raquette, mur, brique, balle), c'est important de créer chaque objet avant de commencer à les paramétrer en profondeur. Une fois chaque objet créer nous allons nous intéresser à la raquette. Tout d'abord dans l'évenement create de votre raquette, initialisez quatre variables : * nb_brique à 0 * ismoving_right à 0 * ismoving_left à 0 * ismoving à 0 la première servira à savoir s'il reste des briques sur le terrain et les trois autres seront utiles pour le contrôle des mouvement de la raquette. sur l'évènement Step, entrez l'algorithme suivant : si nb_brique = 0 { alors restart la room; } ensuite créer un évènement "collision avec mur", et mettez comme le "bounce" avec les paramètre suivant : appliquer aux autre, précision précise, et rebondir sur tous les objet. maintenant passons aux mouvement : pour tout ce qui concerne la gauche, créez un évènement left pressed et left released. Dans left pressed, implantez l'algo suivant : si ismoving =0 { start moving in a direction (droite, force -7, relative) set variable ismoving_left to 1 set variable ismoving to 1 } Ce bout de code signifie, que si la raquette ne bouge alors elle commence à se déplacer à gauche lorsque l'on appuie sur la flèche de gauche, il permet aussi d'empécher certain bug si jamais la flêche droite et la flèche gauche sont appuyées en même temps. Pour left released le code ressemblera à ça : si ismoving_left = 1 { start moving in a direction (droite, 7, relative) set variable ismoving_left to 0 set variable ismoving to 0 } Sachez que le 7 est une valeur arbitraire, vous pouvez la changer à tout moment pour moduler la vitesse de votre raquette. Par contre n'oubliez pas que la vitesse lors du pressage de touche doit être l'opposée de celle lors du release. Pour faire le déplacement vers la droite il suffit d'inverser la puissance de déplacement et de remplacer tout les ismoving_left, par des ismoving_right. Et voilà vous n'aurez plus à toucher la raquette.à vous n'aurez plus à toucher la raquette.)
- Casse brique game Maker + (Comme pour les sprites, vous allez devoir … Comme pour les sprites, vous allez devoir créer un objet par élément de votre jeu. Nous allons d'abords créer chaque objet (raquette, mur, brique, balle), c'est important de créer chaque objet avant de commencer à les paramétrer en profondeur. Une fois chaque objet créer nous allons nous intéresser à la raquette. Tout d'abord dans l'évenement create de votre raquette, initialisez quatre variables : * nb_brique à 0 * ismoving_right à 0 * ismoving_left à 0 * ismoving à 0 la première servira à savoir s'il reste des briques sur le terrain et les trois autres seront utiles pour le contrôle des mouvement de la raquette. sur l'évènement Step, entrez l'algorithme suivant : si nb_brique = 0 { alors restart la room; } ensuite créer un évènement "collision avec mur", et mettez comme le "bounce" avec les paramètre suivant : appliquer aux autre, précision précise, et rebondir sur tous les objet. maintenant passons aux mouvement : pour tout ce qui concerne la gauche, créez un évènement left pressed et left released. Dans left pressed, implantez l'algo suivant : si ismoving =0 { start moving in a direction (droite, force -7, relative) set variable ismoving_left to 1 set variable ismoving to 1 } Ce bout de code signifie, que si la raquette ne bouge alors elle commence à se déplacer à gauche lorsque l'on appuie sur la flèche de gauche, il permet aussi d'empécher certain bug si jamais la flêche droite et la flèche gauche sont appuyées en même temps. Pour left released le code ressemblera à ça : si ismoving_left = 1 { start moving in a direction (droite, 7, relative) set variable ismoving_left to 0 set variable ismoving to 0 } Sachez que le 7 est une valeur arbitraire, vous pouvez la changer à tout moment pour moduler la vitesse de votre raquette. Par contre n'oubliez pas que la vitesse lors du pressage de touche doit être l'opposée de celle lors du release. Pour faire le déplacement vers la droite il suffit d'inverser la puissance de déplacement et de remplacer tout les ismoving_left, par des ismoving_right. Et voilà vous n'aurez plus à toucher la raquette.à vous n'aurez plus à toucher la raquette.)
- Bouchon passe câble + (Tout d'abord pour faire un bouchon passe câble il faut bien prendre la mesure du trou de la table avec un pied a coulisse. <br/>)
- Mini Aéroglisseur connecté + (Tout d'abord, commencez par choisir le type de polystyrène qui convient le mieux. Découpez par la suite, 2 planches de taille identique afin de former le châssis de votre aéroglisseur.)
- Réalisation d'un photophore en bois + (Tout d'abord, il faut téléchager les plans … Tout d'abord, il faut téléchager les plans des façades en bois (elles sont au nombre de 4) et des socles (ils sont 2 + 4 petits éléments de soutiens). Découpez ces pièces à l'aide d'une découpe laser. Comme un document word que l'on imprimerait, les plans dans les logiciels de design sont envoyées vers la découpe laser pour permettre la réalisation des différents éléments qui amèneront à la concrétisation finale de l'objet.ont à la concrétisation finale de l'objet.)
- Applique abat-jour avec lampe murale à la découpe laser + (Tout d'abord, j'ai choisi sur Wikifab, le tutoriel [[Applique Abat-Jour Mural Volcano]])
- Voiture aluminium + (Utiliser une imprimante 3D pour faire le prototype en plastique.)
- Voiture aluminium + (Utiliser une imprimante 3D pour faire le prototype en plastique.)
- Dôme Géodésique Fréquence 2 paramétrable + (Quel que soit le diamètre d’un dôme de fréquence 2, les angles des montants sont toujours identiques : 16 et 18 degrés respectivement pour les types A et B.)
- Dôme Géodésique Fréquence 2 paramétrable + (Un dôme géodésique est une structure aux m … Un dôme géodésique est une structure aux multiples propriétés très intéressantes : outre l’aspect esthétique original, ce type de structure offre une excellente résistance aux intempéries et une résistance mécanique élevée. Elle est composée de montants (en bois, métal, PVC...) reliés entre eux par des connecteurs. Lors de la conception d’un dôme : plusieurs facteurs sont à prendre en compte : *Le diamètre : Plus il est élevé, plus la construction du dôme sera complexe et plus la hauteur sous plafond du dôme sera importante (hauteur sous plafond = rayon du dôme). A noter que toute construction dépassant 20 m² doit faire l’objet d’une demande de permis de construire auprès de la commune. *La fréquence : Pour un diamètre donné, il est possible de construire le dôme avec une densité plus ou moins élevée de montants et de connecteurs : c’est ce qu’on appelle la fréquence. Ici nous allons réaliser un dôme de fréquence 2, le plus simple à réaliser (et donc le moins coûteux), cependant la méthodologie reste applicable pour tous types de dôme. *Le support : Selon l’utilisation du dôme il faut prévoir un système de support (ou base) : dans notre cas l’utilisation du dôme en tant que serre nous permet de poser directement le dôme sur des plots en béton sans construire de plancher. poser directement le dôme sur des plots en béton sans construire de plancher.)
- Introduction à la CNC + (Une fraiseuse est une machine-outil qui us … Une fraiseuse est une machine-outil qui usine par enlèvement de matière, à l'aide d'un outil tournant (fraise). La méthode d’usinage est dite soustractive, à l’inverse la méthode d’usinage d’une imprimante 3D est dite additive (ajout de matière). Le FaBLab est équipé d’une fraiseuse numérique "Signstech 6090DS "personalisée, d’une surface de travail de 1*1 m. et d'une puissance de 1.5kw. C'est une fraiseuse 3 axes, c'est à dire que la fraise (l’outil de coupe) se déplace sur 3 axes qui sont X, Y et Z. ● Axe X => Gauche-droite (Axe horizontal) ● Axe Y => Avant-arrière (Axe de profondeur) ● Axe Z => Haut-bas (Axe vertical) Pourquoi choisir la fraiseuse au lieu de la découpeuse laser ? ● Avantages : -La fraiseuse permet d'usiner des matériaux plus épais, et sans contrainte de composants tels que le chlore ou la colle. Le PVC ne s’usine que sur la fraiseuse ('''jamais''' laser) -Il n’y a pas de zone affectée thermiquement -La fraiseuse numérique permet de produire des pièces en 2.5D (en volume), alors qu’une découpeuse laser ne permet de découper qu’en 2D (contours). ● Inconvénients : -La fraiseuse est moins précise qu’une découpeuse laser -Les fraises étant des outils cylindriques , les coins intérieurs sont forcément arrondis. -La complexité de la machine ainsi que les règles de sécurité qui lui sont liées rendent la machine plus complexe à prendre en main que les autres CNC, et donc un temps plus long avant d'être autonome sur celle-ci.temps plus long avant d'être autonome sur celle-ci.)
- Introduction à la CNC + (La CNC permet d'usiner plusieurs types de … La CNC permet d'usiner plusieurs types de matériaux tels que :
○ Le bois massif et des dérivés du bois (MDF, contreplaqué…)
○ Les matériaux plastiques (PMMA, POM, PC, PVC…)
○ Les métaux non-ferreux (Aluminium tendre, Cuivre, laiton…)
○ Les Mousses (PU, Polystyrène…)
○ Le caoutchouc et certains silicones
de carbone ou de verre) : les micro-poussières générées sont difficiles a filtrer (mauvais pour les poumons)</div> </div><br/>) - How to Use Spotify as an Alarm on iPhone, Android, and Smart Speakers + (Unfortunately, the default Clock app on iP … Unfortunately, the default Clock app on iPhones does not integration with Spotify. However, you can use third-party alarm apps such as Music Alarm Clock for Spotify+ or Kello Alarm Clock to set Spotify songs as your alarm. Here's how: '''Step 1.''' Install and launch the Music Alarm Clock for Spotify+ app or Kello Alarm Clock app on your iPhone. '''Step 2.''' Sign in with your Spotify account on those alarm app and open the app settings. '''Step 3.''' Create a new alarm by tapping the Add button and setting a specific alarm time. '''Step 4.''' Select the alarm sound and choose Spotify as the source. Browse and add your preferred Spotify songs or playlists as the alarm sound. '''Step 5.''' Save the settings, and your alarm will wake you with Spotify songs.ur alarm will wake you with Spotify songs.)
- Glowing LED Butterfly + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
- SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
- SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
- Créer un film en stop motion avec des objets de récupération + (Vous devez sélectionner des objets qui seront les héros de votre film, à savoir des personnages et des éléments de décors.)
- Nutridome I SDG 11 I South Africa + (This is a PVC pipe that has been drilled w … This is a PVC pipe that has been drilled with holes we were going to use disposable plastic cups but we found some plastic growing cups in the store room and we used those. for this demonstration we are using an ordinary aquarium pump and pipes for the water flow. The bucket is just a normal bucket. The dome was made from 25mm PVC electrical wiring pipes. The dome was inspiration for the idea as we saw it at the Centre and realised its potential. the PVC pipes are held together with cable ties, glue and connectors. The shading is normal garden shade and plastic sheeting can be placed over the structure to create more controlled environments. This will be when you have put the hydroponic system with lighting inside the dome we just wanted to illustrate the look for the final product of the dome.he look for the final product of the dome.)
- ESP32 with WebSerial: A Comprehensive Guide + (WebSerial is a web standard that allows we … WebSerial is a web standard that allows websites to communicate with serial devices. It bridges the web and the physical world, enabling web applications to interact with hardware devices. This opens up a world of possibilities for IoT projects, allowing real-time interaction between web applications and physical devices.een web applications and physical devices.)
- Empty room activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
- Brightness control activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
- SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
- SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
- How to Play Spotify While Playing Roblox + (With a few simple steps, you can now enjoy your favorite tunes from Spotify while immersing yourself in the world of Roblox, whether on mobile or PC.)
- Cardboard Cable Car Model With Recycled Materials, Working Model 250rpm Electric Motor and Basic Slide Switch ON-OFF-ON (School Science Project) + (You can check all steps on video briefly or follow below steps. • Mount plastic pulley wheel onto DC motor shaft and glue on it.)
- SunZilla - Guide 5: Assembling solar panels frames + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
- Water Quality Monitoring System Based on IOT + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Node Red Controlled Neo Pixel on Raspberry Pi 4 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Node-Red Telegram Bot with Temperature Logger Part-2 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- Getting Started with TivaWare Launchpad - Basics + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Line Follower Robot - King of Maze + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Ethernet-Enhanced LoRa Gateway Minimizing Delay + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- AWS IoT Core IoT Platform Series - 6 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Getting Started with ESP-NOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Appliances Control with ESPNOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Node Red with Raspberry Pi + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Temperature Control Neo Pixels with Arduino Nano + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here]. Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- Neo Pixels Ring with Arduino Nano + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here. U]sing this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- Node Red Controlled Web LED on ESP32 with Raspberry Pi 4 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
- DHT11 with ESPNOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] toget them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- M5Stick C Captive Portal + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- How To Make A Perfect Study Table/en-gb + (The material of your kid's study table pla … The material of your kid's study table plays a vital role. A strong wood desk lasts for ages, metal ones offer a contemporary feeling while the ones produced using steel offer a feeling of modernity. For a wooden study table, '''[https://www.truworthhomes.com/wood-stain.html Rust-Oleum Truworth Wood Stain]''' gives life span and influences your furniture to look young for years. If you have a necessity of moving your work desk frequently, think about picking something lightweight, durable and which fixed with casters. Desks with easy dismantling feature are also easier to move. mantling feature are also easier to move. )
- Mölkky + (You need to cut twelve skittles and one th … You need to cut twelve skittles and one throwing pin, or mölkky (although you may wish to cut two). The skittles need to be cut with one end at around a 30º angle. If you are cutting all the skittles from a single piece of wood, that means that you need to alternate between 30º and 90º cuts, starting with a 30º cut. You are aiming for lengths of about 20cm / 8" for both the skittles and the mölkky./ 8" for both the skittles and the mölkky.)
- Mölkky + (You need to cut twelve skittles and one th … You need to cut twelve skittles and one throwing pin, or mölkky (although you may wish to cut two). The skittles need to be cut with one end at around a 30º angle. If you are cutting all the skittles from a single piece of wood, that means that you need to alternate between 30º and 90º cuts, starting with a 30º cut. You are aiming for lengths of about 20cm / 8" for both the skittles and the mölkky./ 8" for both the skittles and the mölkky.)
- Minetest and 3D scanning + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
- Minetest and 3D scanning + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
- ESP32 DHT22 IFTTT + (You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny: *Go to https://thonny.org/ *Download *Install and then open)
- Marble Machine No 1 Motor Assembly Instructions + (The parts can be glued together in one go … The parts can be glued together in one go and the parts held in place with rubber bands The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
- Analogic Drawing Pad + (You will need to draw 10 pulleys in total. … You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
- Analogic Drawing Pad + (You will need to draw 10 pulleys in total. … You will need to draw 10 pulleys in total. To draw the pulleys, just place them on the board and draw their contour. Place de pulleys marked with “1” at 2cm from the sides of the board, and 5cm from the bottom of the board (the bottom of the board is the longest side). bottom of the board is the longest side).)
- Pet that lights up upon interaction + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Energy saving house with ESP32 + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Energy saving house with ESP32 + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Pet that lights up upon interaction + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Simple Train Blocking System + (You'll need to cut the rails or isolate th … You'll need to cut the rails or isolate them to make sure each block is independent. The last track is the security track and is isolated from the rest. The sticker on the plaque is right on the security track. What you see before is the main track (stop zone) and what you see after is the stop zone of the next block. after is the stop zone of the next block.)
- Daouig, compteur de jauge + ([Design en cours])
- Gant Sonar + ('''Arduino UNO''' '''Capteur Ultrason (H … '''Arduino UNO''' '''Capteur Ultrason (HC-SR04)''' - GND = GND - VCC = 5V - Trig = Pin 9 - Echo = Pin8 '''Alternateur 10A , 5V (SRD-5VDC-SL-C)''' -VCC = 5V - GND = GND - IN = Pin 6 - ON = + Moteur - COM = - Moteur '''Moteur''' + Moteur= - COM ( Alternateur) - Moteur = GNDeur= - COM ( Alternateur) - Moteur = GND)
- Gant Sonar + ('''Arduino UNO''' '''Capteur Ultrason (H … '''Arduino UNO''' '''Capteur Ultrason (HC-SR04)''' - GND = GND - VCC = 5V - Trig = Pin 9 - Echo = Pin8 '''Alternateur 10A , 5V (SRD-5VDC-SL-C)''' -VCC = 5V - GND = GND - IN = Pin 6 - ON = + Moteur - COM = - Moteur '''Moteur''' + Moteur= - COM ( Alternateur) - Moteur = GNDeur= - COM ( Alternateur) - Moteur = GND)
- Best Amazon Music Converter in 2021 Is Here + (“Our Audio Capture also enables users to r … “Our Audio Capture also enables users to rip Amazon Music to common audio tracks. But it's a little complicated to operate as it works on any sound playing on the computer. Therefore, there are more and more customers who feedback that they need a customized Amazon Music Converter,” Charles David said, the product manager of AudFree Software. “Under this circumstance, with the hardworking of our professional engineers, AudFree Amazon Music Converter is created and developed successfully, which can automatically detect and split songs, and realize batch addition and conversion,” added he. batch addition and conversion,” added he.)
- Blindspot Alert + (In the second step, we came up with sketch … In the second step, we came up with sketches, designs and prototype. For our prototype, we made use of electronic components such as LED, Buzzer,Battery, solar panel, wires and sensors in order to detect a car coming from a blindspot. We also made use of cardboxes to design the exact scenario of someone getting hit and occuring accidents.omeone getting hit and occuring accidents.)
- Petit bras robotique + (Dans mBlock ouvrez un nouveau dossier. N'o … Dans mBlock ouvrez un nouveau dossier. N'oubliez pas les étapes : - connecter le câble usb après branchement - connecter > usb - téléverser le microporgramme - cliquer le drapeau vert Pour ceci on cré une variable, position. Changez la variable quand on presse la flèche droite. De combien de degrés est-ce qu'on peut changer la position du moteur ?ce qu'on peut changer la position du moteur ?)
- ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
- ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
- Commande et instrumentation de trottinette électrique 500W avec Arduino méga + (<nowiki>'''2. Bibliographie :'''< …
'''2. Bibliographie :''' r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT); //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT); // broche (10) en sortie timer2<br /><br />// digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000); // initialize timer1, and set a 0,1 second period => 100 000<br /><br />Timer1.attachInterrupt(callback); // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4); <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
Lien download :
'''sketch_escooter_feed_back_reel_V1.ino'''
https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing
'''escooter_ampli_SIMULINK.mdl'''
https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing
'''escooter feed back ISIS.DSN'''
https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing
En anglais
https://forum.arduino.cc/index.php?topic=477397.0
article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »
En attente
'''3. Programme en boucle ouverte'''
Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.
BP1 pour incrémenter manuellement le rapport cyclique, BP2 le décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein.
La vitesse du moteur est pratiquement proportionnelle au rapport cyclique
https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg
Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield
Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants.
http://www.robotpower.com/products/MegaMotoPlus_info.html
http://www.robotshop.com/en/dc-motor-driver-2-15a.html
https://www.pololu.com/file/0J51/vnh3sp30.pdf
https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg
mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant.
Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.
Mais quel doit être la valeur du courant de limitation ?
Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.
Dans notre cas, le courant de limitation devra etre de
Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A
De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.
Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.
Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de L/R= 1.5ms.
Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.
l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.
'''Algo boucle ouverte'''
Routine d'interruption toutes les 0.1S
Lire tension et courant
Boucle loop (scrutation des boutons poussoirs)
Si BP1=1 alors incrementer PWM
Si BP2=1 alors décrementer PWM
Si BP3=1 alors PWM=0
Affichage des variables tous les 0.2s
'''code'''
{{
// include the library code:
#include
#include
#include
#define SERIAL_PORT_LOG_ENABLE 1
#define Led 13 // 13 pour la led jaune sur la carte
#define BP1 30 // 30 BP1
#define BP2 31 // 31 BP2
#define BP3 32 // 32 BP3
#define LEDV 33 // 33 led
#define LEDJ 34 // 34 led
#define LEDR 35 // 35 led
#define relay 36 // 36 relay
#define PWM10 10 //11 timer2
LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26
// Configuration des variables
unsigned int UmoteurF = 0; // variable to store the value coming from the sensor
unsigned int Umoteur = 0;
unsigned int Umoteur2 = 0;
unsigned int Umoteur3 = 0;
unsigned int Umoteur4 = 0;
unsigned int ImoteurF = 0;
unsigned int Imoteur = 0;
unsigned int Imoteur2 = 0;
unsigned int Imoteur3 = 0;
unsigned int Imoteur4 = 0;
byte Rcy=0 ; //rapport cyclique 8bit
unsigned int temps;
// the setup function runs once when you press reset or power the board
void setup() {
pinMode(Led, OUTPUT); //led carte arduino
pinMode(LEDV, OUTPUT);
pinMode(LEDR, OUTPUT);
pinMode(LEDJ, OUTPUT);
pinMode (PWM10,OUTPUT); // broche (10) en sortie timer2
// digitalWrite(LEDV,LOW);
Timer1.initialize(100000); // initialize timer1, and set a 0,1 second period => 100 000
Timer1.attachInterrupt(callback); // attaches callback() as a timer overflow interrupt
lcd.begin(20, 4);
Serial1.begin(9600);
TCCR2B = (TCCR2B & 0b11111000) - Commande et instrumentation de trottinette électrique 500W avec Arduino méga + (<nowiki>'''2. Bibliographie :'''< …
'''2. Bibliographie :''' r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT); //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT); // broche (10) en sortie timer2<br /><br />// digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000); // initialize timer1, and set a 0,1 second period => 100 000<br /><br />Timer1.attachInterrupt(callback); // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4); <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
Lien download :
'''sketch_escooter_feed_back_reel_V1.ino'''
https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing
'''escooter_ampli_SIMULINK.mdl'''
https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing
'''escooter feed back ISIS.DSN'''
https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing
En anglais
https://forum.arduino.cc/index.php?topic=477397.0
article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »
En attente
'''3. Programme en boucle ouverte'''
Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.
BP1 pour incrémenter manuellement le rapport cyclique, BP2 le décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein.
La vitesse du moteur est pratiquement proportionnelle au rapport cyclique
https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg
Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield
Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants.
http://www.robotpower.com/products/MegaMotoPlus_info.html
http://www.robotshop.com/en/dc-motor-driver-2-15a.html
https://www.pololu.com/file/0J51/vnh3sp30.pdf
https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg
mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant.
Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.
Mais quel doit être la valeur du courant de limitation ?
Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.
Dans notre cas, le courant de limitation devra etre de
Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A
De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.
Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.
Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de L/R= 1.5ms.
Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.
l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.
'''Algo boucle ouverte'''
Routine d'interruption toutes les 0.1S
Lire tension et courant
Boucle loop (scrutation des boutons poussoirs)
Si BP1=1 alors incrementer PWM
Si BP2=1 alors décrementer PWM
Si BP3=1 alors PWM=0
Affichage des variables tous les 0.2s
'''code'''
{{
// include the library code:
#include
#include
#include
#define SERIAL_PORT_LOG_ENABLE 1
#define Led 13 // 13 pour la led jaune sur la carte
#define BP1 30 // 30 BP1
#define BP2 31 // 31 BP2
#define BP3 32 // 32 BP3
#define LEDV 33 // 33 led
#define LEDJ 34 // 34 led
#define LEDR 35 // 35 led
#define relay 36 // 36 relay
#define PWM10 10 //11 timer2
LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26
// Configuration des variables
unsigned int UmoteurF = 0; // variable to store the value coming from the sensor
unsigned int Umoteur = 0;
unsigned int Umoteur2 = 0;
unsigned int Umoteur3 = 0;
unsigned int Umoteur4 = 0;
unsigned int ImoteurF = 0;
unsigned int Imoteur = 0;
unsigned int Imoteur2 = 0;
unsigned int Imoteur3 = 0;
unsigned int Imoteur4 = 0;
byte Rcy=0 ; //rapport cyclique 8bit
unsigned int temps;
// the setup function runs once when you press reset or power the board
void setup() {
pinMode(Led, OUTPUT); //led carte arduino
pinMode(LEDV, OUTPUT);
pinMode(LEDR, OUTPUT);
pinMode(LEDJ, OUTPUT);
pinMode (PWM10,OUTPUT); // broche (10) en sortie timer2
// digitalWrite(LEDV,LOW);
Timer1.initialize(100000); // initialize timer1, and set a 0,1 second period => 100 000
Timer1.attachInterrupt(callback); // attaches callback() as a timer overflow interrupt
lcd.begin(20, 4);
Serial1.begin(9600);
TCCR2B = (TCCR2B & 0b11111000) - PP Sheetpress + (====Tools====
same as above
====Parts==== … ====Tools====
same as above
====Parts====
36 corner brackets
====Steps====
# Prepare your parts. Each "cell" will require 4 brackets, 16 M8Bolts, and 16 washers
# Starting with the 4 corners of the ''entire assembly'', attach the corner brackets and tighten the bolts only to finger-tight.
# Next attach the 920 beam ends to the outer perimeter.
# Next, attach the inner beams in place. Ensure that all beams are equally spaced. (remember that the 2 interior beams are shorter though)
interior beams are shorter though) <br/>) - Cheap and Cute Digital PhotoFrame Without SD Card on ESP8266and1-8inch TFT + (<nowiki>1.8 TFT Panel ST7735 https:/ …
1.8 TFT Panel ST7735 https://www.aliexpress.com/item/32913848470.html m/thing:4097143<br /><br />Some Wires & Soldering Iron.</nowiki>)
1.8 TFT Panel ST7735 https://www.banggood.com/1_441_82_02_22_42_8-Inch-TFT-LCD-Display-Module-Colorful-Screen-Module-SPI-Interface-p-1494883.html
ESP8266 WEMOS D1 https://www.aliexpress.com/item/33036965281.html
3D Printed Case https://www.thingiverse.com/thing:4097143
Some Wires & Soldering Iron. - Virtual Fence - Anti Theft Device + (<nowiki>A Fence is a physical bounda …
A Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located. e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''
The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.
But before we get started - - 3D CAM sous Fusion 360 + (<nowiki>Avant de commencer la progra …
Avant de commencer la programmation du CAM, considérez votre pièce et la meilleure approche pour l'usiner. Ces décisions dépendent de la forme du modèle, des matériaux, et des contraintes de la machine CNC que vous utilisez. Dans cette étape, vous apprendrez comment ces facteurs impactent votre stratégie d'usinage en ce qui concerne la fixation (workholding), le référencement (registration, c'est-à-dire s'assurer que la CNC sache où se trouve la pièce, et les paramètres du CAM. utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise.</nowiki>)
Chemins d'outil 3D
Dans un toolpath 2D (poche, contour, tracé, ...), la tête de la fraise reste à une profondeur fixe (axe Z) durant une passe d'usinage, et ne bouge que dans les directions X et Y pendant qu'elle coupe. Ce type d'usinage est idéal pour des pièces prismatiques, pour lesquelles toutes les faces usinées sont perpendiculaires à l'axe de la broche de la machine.
Lors de la programmation de pièces non prismatiques, telles que des moules ou des formes organiques, les opérations 2D sont insuffisantes. Vous devez utiliser des opérations de CAM 3D, dans lesquelles la fraise se déplace de manière dynamique selon X, Y et Z.
Serrage
Le serrage (workholding) est la stratégie pour maintenir votre pièce de manière rigide pendant le processus d'usinage. Lors de la programmation avec des parcours d'outil 3D, la mise en oeuvre est une considération initiale importante. Cela est particulièrement vrai pour les pièces qui nécessitent un usinage des deux côtés, lorsque la pièce sera basculée entre les ''setups''. (programmes d'usinage)
Pour la programmation de pièces prismatiques,où les CAM 2D et 2.5D requièrent uniquement un modèle de CAO de la pièce que vous souhaitez usiner, aucune fonctionnalité supplémentaire n'est présente pour la fixation ou le référencement . En effet, la pièce prend la forme d'un prisme rectangulaire, qui peut être facilement maintenu dans un étau ou fixé au martyr.
Mais que faites-vous lorsque votre forme est plus organique ou irrégulière, et doit également être retournée à la machine des deux côtés? Dans ce cas, vous devez créer un matériau supplémentaire qui maintiendra votre pièce dans un étau, contre le martyr ou à plat contre le bas de la machine. Il est très difficile de programmer le CAM sans avoir ces fonctionnalités intégrées dans votre modèle.
En d’autres termes, l’usinage 3D avec retournement nécessite que vous modélisiez la matière que vous souhaitez laisser ainsi que des onglets pour éviter que votre pièce ne se détache dans la machine. Ces onglets seront coupés et poncés après l'usinage, généralement avec une scie à ruban et une ponceuse à disque.
Pour votre cuillère de service, vous aurez deux onglets - un à chaque extrémité - et un prisme rectangulaire qui tiendra la cuillère à plat après le retournement. Lors de la modélisation, il est préférable de créer ces suppléments en tant que corps (bodies) distincts de la pièce à usiner.
Référencement
Étant donné que la cuillère sera usinée des deux côtés (usinage par retournement), vous devez vous assurer que la machine à commande numérique peut localiser la pièce avec précision après son déplacement. Ceci s'appelle l'enregistrement.
Si vous avez déjà utilisé Haas, vous savez utiliser une sonde pour localiser votre pièce. Cependant, comme beaucoup de routeurs de table, le DMS n’a pas de sonde. Lorsque vous utilisez le DMS pour localiser l’origine de votre système de coordonnées de travail (Work Home), vous insérez un outil dans la broche et vous le positionnez au bon endroit. Il est courant de coincer un morceau de papier entre le support et l’outil pour s’assurer que Z est correct. Dans la classe des machines DMS, vous apprendrez à saisir les codes pour configurer votre WCS de cette manière. Comme vous pouvez l’imaginer, ce système n’est pas précis, car vous ne faites que "regarder les yeux" de cet endroit.
Cela implique de devoir considérer une manière d'aligner les deux côtés de la pièces précisément si elle doit s'usiner des deux côtés. Il y a plusieurs méthodes possibles, chacune avec ses avantages et ses inconvénients qui dépendent de la spécificité de la pièce à usiner. Parmi les méthodes les plus courantes: - Attacher des butées sur le martyr ou le lit de la fraiseuse, où ira se caler la pièce usinée. - Usiner un contour dans le martyr, pour ensuite placer la pièce à l'intérieur en serrage - forer des trous pouvant accueillir des "pins" en bois, dans la pièce à usiner et dans le martyr, pour les solidariser (le plus précis)
La dernière méthode est celle que nous utiliserons pour la cuillère. Lors de l'usinage de la face avant, vous percerez également trois trous à travers le stock et partiellement à travers le martyr. Lors du retournement de la pièce, vous insérerez des tourillons dans ces trous afin d'aligner l'autre face parfaitement avec la première.
Paramétrage du CAM Les spécificités du projet (usinage de bois sur une fraiseuse multi-outils) vont également déterminer certains choix lors de la programmation des chemins d'outil. En l'occurrence, l'usinage du bois ou du platique n'est pas un usinage rapide. Cela autorise l'utilisation de chemins d'outils adaptatifs pour le "dégrossage", mais vous ne pouvez pas utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise. - How to Delete Tidal Account Permanently without Subscription + (<nowiki>If you are using Apple produ …
If you are using Apple products such as iOS devices, you will find a Delete Account option on your iOS Tidal app. Just follow the steps below to close Tidal account permanently. gt;Step 4. On the new screen, tap the bottom ''''Delete account'''' option.<br /><br /><br/></nowiki>)
Step 1. Open the Tidal app on your iPhone.
Step 2. Tap the top-right '''gear''' icon from the '''My Collection''' section to go to Tidal '''Settings'''.
Step 3. Scroll down and choose ''''Manage account''''.
Step 4. On the new screen, tap the bottom ''''Delete account'''' option. - How to Set Tidal Sleep Timer + (<nowiki>If you are using an Android …
If you are using an Android phone, you need to install a professional Sleep Timer app from the Google Play store on your Android device and then create a sleep timer according to your needs. Now, look at the steps below. ''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.</nowiki>)
'''Step 1.''' Download ''''Sleep Timer (Turn music off)'''' on your Android from Google Play.
'''Step 2.''' Launch the app and tap on the three vertical dots in the top right corner of the home screen.
'''Step 3.''' On the '''Setting''' menu, click ''''Player to launch on start'''' and select ''''Tidal'''' from the app list.
'''Step 4.''' Go back to the '''Settings''' menu and then choose ''''On sleep'''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music. - Qubitro Device Data - IoT Platform Series + (<nowiki>To get started with Qubitro, …
To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account. shall automatically be logged in to our account.</nowiki>)
Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account. - EMI probe 9-11 + (<nowiki>Whether you re using an ardu …
Whether you re using an arduino uno or a nano, the code that you ll need to upload in order for the probe to function correctly is basically the same. lay);<br /><br />Serial.begin(9600);<br /><br />}<br /><br />void loop()<br /><br />{<br /><br />val = analogRead(inPin);<br /><br />Serial.println(val);<br /><br />dispData(val);<br /><br />val = map(val, 1, 100, 1, 2048);<br /><br />tone(9,val,10);<br /><br />}<br /><br />void dispData(int i)<br /><br />{<br /><br />if ((i<-999)</nowiki>)
Just make sure to program the correct digital pin for the piezo speaker. In the instructions above, we connected the speaker on D9 on an arduino uno, and D3 on an arduino nano.
// Arduino Electromagnetic interference detector
// Code modified by Patrick Di Justo, based on
// Aaron ALAI EMF Detector April 22nd 2009 VERSION 1.0
// aaronalai1@gmail.com
//
// This outputs sound and numeric data to the 4char
#include
#define SerialIn 2
#define SerialOut 7
#define wDelay 900
int inPin = 5;
int val = 0;
SoftwareSerial mySerialPort(SerialIn, SerialOut);
void setup()
{
pinMode(SerialOut, OUTPUT);
pinMode(SerialIn, INPUT);
mySerialPort.begin(19200);
mySerialPort.print("vv");
mySerialPort.print("xxxx");
delay(wDelay);
mySerialPort.print("----");
delay(wDelay);
mySerialPort.print("8888");
delay(wDelay);
mySerialPort.print("xxxx");
delay(wDelay);
Serial.begin(9600);
}
void loop()
{
val = analogRead(inPin);
Serial.println(val);
dispData(val);
val = map(val, 1, 100, 1, 2048);
tone(9,val,10);
}
void dispData(int i)
{
if ((i<-999) - Automated Gardening Plant with arduino Uno under the DEEDU project + (<nowiki>You will need<br />< …
You will need link<br /><br />- 1 5V water pump link<br /><br />- 1 5v relay link<br /><br />- 3 1k resistor link<br /><br />- 1 Breadbord or prototyping PCB link<br /><br />-2 5v power supply link</nowiki>)
electronic control and command part (listed below)
water tank
a plant in a pot
a box for electronic (https://www.thingiverse.com/thing:4106140)
3d printed light sensor support (https://www.thingiverse.com/thing:3986667)
3d printed sprinkler (https://www.thingiverse.com/thing:3986672)
For the Command & Control part the material used are the following:
- 1 Arduino UNO link
- 1 moisture sensor link
- 1 CO2 Gas sensor Mq7 link
- 1 Lcd screen 2x16 (+i2c)) link
- 1 LDR light sensor (photoresistor) link
- 2 push buttons link
- 1 Temp + humidity sensor DHT11 link
- 1 5V water pump link
- 1 5v relay link
- 3 1k resistor link
- 1 Breadbord or prototyping PCB link
-2 5v power supply link - 3D CNC milling avec CAM Fusion 360 + (<section class="step"><br />Be …
Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.
3D Toolpathing
If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.
When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.
Workholding
Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.
When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.
But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.
In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.
Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.
For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.
Registration
Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.
If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.
This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:
--Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed
--Machining a contour into your spoiler board, then placing your stock exactly inside that contour
--Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)
This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.
CAM Settings
The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths.
-Tool numbering
If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.
Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.
If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.
-Rules for roughing
Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.
When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter. - Mobile renewable energy platform on a cargo bike + ('''''charging''''' - input : DC power for … '''''charging''''' - input : DC power for 5 generation bikes power 5*100W - peak 5*200 voltage 48V current 30A '''''conversion and output''''' - output AC : power for an open-air cinéma, projector and active speakers - output DC : power for a 3D printer power 700W voltage 220AC current 1A '''''battery''''' - buffer : DC supercapacitor power 1000W voltage 48V current 30A - peak 40A1000W voltage 48V current 30A - peak 40A)
- 3D-Druck Schlüsselanhänger + ('''1.''' Öffne Tinkercad indem du auf das … '''1.''' Öffne Tinkercad indem du auf das Tinkercad-Icon am Desktop klickst. '''2.''' Klicke auf die Schaltfläche '''„Neuen Entwurf erstellen“'''. Eine leere Arbeitsfläche wird sich öffnen. '''3.''' Gib deinem neuen Design (und der Datei) einen Namen. Klicke auf die lustigen Worte in der oberen linken Ecke neben dem -Logo und benne dein Werkstück z.B. ''„Lesezeichen_dein Name“'' oder ''„Schlüsselanhänger_dein Name“'' '''Objekt erstellen''' '''1..''' Auf der rechten Seite kannst du verschieden Formen finden. Wähle die '''rote „Box“'''in dem du auf sie klickst. '''2.''' Bewege die Box in die Mitte der Arbeitsfläche und platziere sie dort mit einem Linksklick. '''3.''' Klicke auf das kleine weiße Quadrat in der Mitte der Box um die Höhe anzupassen. Ändere den Wert für die '''Höhe''' auf '''2.00 mm'''. '''4.''' Klicke auf die kleinen weißen Quadrate an den Ecken der Box um die Länge und Breite zu ändern. Ändere die '''Breite''' auf '''50.00 mm''' und die '''Länge''' auf '''20.00 mm'''.'' und die '''Länge''' auf '''20.00 mm'''.)
- Bento Red Room + ('''3D Printing''' * Filament: PVA and ABS … '''3D Printing''' * Filament: PVA and ABS * Wood '''Electronic''' * 1 Arduino Uno cards * male-male and male-female prototyping cables * LCD SSD1306 128 x 64 * 1 LED 8mm * 2 ring of 12 LEDs * 1 potentiometer * 1 BME280 weather sensor * 1 switch * 1 x 5V power supply * 220 and 10000 Ohms resistors * 3 x servomotors * Buzzer === Tools === '''Machines''' * 3D printer * Découpeur de laser '''Software''' * Tinkercad, Microsoft 3D builder, Blender * Cura Ultimaker * Arduino '''Prototyping''' * soldering iron * cutting pliers * wire stripper * glueon * cutting pliers * wire stripper * glue)
- Bento Night Sky + ('''3D Printing''' *Filament: PVA and ABS … '''3D Printing''' *Filament: PVA and ABS *Wood '''Electronic ''' *1 Arduino Uno cards *male-male and male-female prototyping cables *LCD SSD1306 128 x 64 *1 LED 8mm *2 ring of 12 LEDs *1 potentiometer *1 BME280 weather sensor *1 switch *1 x 5V power supply *220 and 10000 Ohms resistors *3 x servomotors *Buzzer ===Tools=== '''Machines''' *3D printer *Découpeur de laser '''Software ''' *Tinkercad, Microsoft 3D builder, Blender *Cura Ultimaker *Arduino '''Prototyping''' *soldering iron *cutting pliers *wire stripper *glue iron *cutting pliers *wire stripper *glue)
- E-Club + ('''<u>Le produit</u>''': Il s … '''Le produit''': Il s'agit du système d'accroche du club. Nous allons le coller avec de la glue sur le boitier. Le système se referme sur le club à l'aide de vis. '''Problèmes rencontrés''': Ce système d'accroche n'est valable que pour un seul diamètre de club. '''Lien vers le projet sur Fusion360''': http://a360.co/2IF5VpB '''Prix''': 0.04€ + 0.04€ = 0.08€(pour les deux parties de la boite) '''Temps''': 0h10min + 0h14min = 0h24min (pour les deux parties de la boite)ite) <u>'''Temps'''</u>: 0h10min + 0h14min = 0h24min (pour les deux parties de la boite))
- Dispositif de sécurité à enregistrement de zone de tir + (Afin de valider le principe, j'ai réalisé … Afin de valider le principe, j'ai réalisé une maquette constituée par un "fusil photographique" auquel j'ai adjoint le système de repérage de la ligne de visée (circuit BNO055 + carte Arduino + buzzer). '''Les photos 1 et 2''' montrent les différents éléments de cette maquette: 1) Un smart phone fixé sur le fusil en bois permet d'enregistrer ce que voit et entend le chasseur lors de l'enregistrement et lors de la phase de chasse. L'objectif du smartphone est situé à l'endroit où se trouve l’œil du chasseur. Cet objectif voit le guidon du fusil en même temps que l'endroit précis visé dans le paysage. 2) Le système de repérage inertiel de la ligne de visée se compose - d'un petit circuit imprimé portant l'unité de mesure inertielle BNO055 - d'une carte de contrôle (Arduino UNO) reliée au BNO055 par un petit câble (alimentation + interface I2C). 3) J'ai également ajouté un buzzer à cette carte. Ce buzzer produit tous les signaux sonores nécessaires pour le suivi de l'enregistrement et de la phase de chasse. '''Nota:''' A l'origine j'aurais souhaité allonger la liaison I2C de façon que seul le petit circuit imprimé du BNO055 se trouve fixé au fusil, la carte de contrôle étant logée dans une poche de veste. Malheureusement la liaison I2C supporte mal l'allongement de la liaison. Pour un développement futur il faudrait donc plutôt utiliser la liaison UART du circuit.lutôt utiliser la liaison UART du circuit.)
- Inkscape - FAQ + ('''IMG 1''' - Par défaut, Inkscape vous do … '''IMG 1''' - Par défaut, Inkscape vous donne la dimension des objets contour compris. La largeur de ce dernier peut gêner dans notre traitement pour les machines laser, cnc, vinyl ...
Ces dernières, en général, passent au milieu du trait. Cela peut devenir vite gênant dans nos dessins.
Si on travaille pour du laser, la taille du contour doit être très petite (par exemple, 0,05mm). Pour nos designs, on ne voit plus rien à l'écran.
Une solution pour ne pas être embêté est de définir la dimension des objets sans tenir compte des contours.
L'avantage est que vous pourrez dessiner avec des contours de 1mm par exemple pour voir correctement à l'écran.
'''IMG 2''' - Paramétrage des dimensions dans Inkscape
*Ouvrir les préférences d'Inskcape : Menu Édition > Préférences *Choisir Outils à gauche *Cocher Boîte englobante géométrique Inkscape ne prend plus en compte la taille des contours. La taille correspond donc bien à la grandeur de notre objet. '''IMG 3''' - Un dernier réglage va vous permettre de ne plus redimensionner les contours de manière automatique et les coins arrondis des rectangles. Décochez les deux options.
rrondis des rectangles. Décochez les deux options. <br/>) - FAQ - Inkscape + ('''IMG 1''' - Par défaut, Inkscape vous do … '''IMG 1''' - Par défaut, Inkscape vous donne la dimension des objets contour compris. La largeur de ce dernier peut gêner dans notre traitement pour les machines laser, cnc, vinyl ... Ces dernières, en général, passent au milieu du trait. Cela peut devenir vite gênant dans nos dessins. Si on travaille pour du laser, la taille du contour doit être très petite (par exemple, 0,05mm). Pour nos designs, on ne voit plus rien à l'écran. Une solution pour ne pas être embêté est de définir la dimension des objets sans tenir compte des contours. L'avantage est que vous pourrez dessiner avec des contours de 1mm par exemple pour voir correctement à l'écran. '''IMG 2''' - Paramétrage des dimensions dans Inkscape * Ouvrir les préférences d'Inskcape : Menu Édition > Préférences * Choisir Outils à gauche * Cocher Boîte englobante géométrique Inkscape ne prend plus en compte la taille des contours. La taille correspond donc bien à la grandeur de notre objet. '''IMG 3''' - Un dernier réglage va vous permettre de ne plus redimensionner les contours de manière automatique et les coins arrondis des rectangles. Décochez les deux options.is des rectangles. Décochez les deux options.)
- How to Share Spotify Song on Snapchat + ('''''Q: Is there a way to share and at the … '''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
- Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
- Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
- OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
- OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
- Imprimer un objet avec ULTIMAKER + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
- Imprimer un objet avec ULTIMAKER + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
- How to Allow or Block Apple Music Explicit Content + ('''Step 1.''' Go to '''Settings''' on your … '''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
- How to Clear Tidal Cache on iOS and Android + ('''Step 1.''' On the Home screen of your A … '''Step 1.''' On the Home screen of your Android phone, press and hold the '''Tidal app icon''' until a menu appears. '''Step 2.''' Tap the icon with i to enter the app’s settings. Or you can go to '''Settings''' > '''Apps''' > '''Tidal''' to set up, too. '''Step 3.''' On the detail page, tap '''Storage & cache''' and then '''Clear cache'''.''Storage & cache''' and then '''Clear cache'''.)
- How to Create Spotify Codes for Sharing with Others + ('''Step 1.''' Open the Spotify app and tap … '''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
- Wio WM1110: Quick Start Guide for Seamless Integration + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
- Sérigraphie par émulsion photographique + ('''Un écran de sérigraphie''' L'écran est … '''Un écran de sérigraphie''' L'écran est composé d'un tissu tendu sur un cadre de bois ou d'aluminium. J'utiliserai ici un tissu avec du 110 mailles (fil par pouces). Les tissus à mailles élevés (200 - 300) impriment avec plus de précision, mais laissent passer moins d'encre. Les tissus aux mailles de 85 à 150 impriment moins de détails, mais laissent une couche raisonnable d'encre, utile pour créer une impression opaque. '''Une source de lumière (ampoule survoltée ou source de soleil direct)''' '''Une raclette''' '''Du ruban gommé''' '''Une feuille d'acétate transparente''' '''De l'encre de sérigraphie''' Attention a choisir l'encre idéale pour votre projet (Si vous imprimez sur tissu, choisissez une encre pour tissu). '''Un kit d'émulsion photographique''' Ce kit comporte 3 bouteilles (dans l'image je n'ai que les deux bouteilles blanches). Le produit ne dure que 4 mois avant de devoir être jeté, et devra être conservé au réfrigérateur. (voir étape 4: préparer un kit d'émulsion photographique) '''Un accès à un lavabo''' ...Et tout ce qu'il faut pour nettoyer: savon, linge à vaisselle, éponge. '''Une chambre noire''' Une pièce sans fenêtre bien ventilée.'' Une pièce sans fenêtre bien ventilée.)
- VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
- VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
- IBaby : bracelet électronique pour bébé en plastique + ( * '''Description''' : pour la première ve … * '''Description''' : pour la première version de notre bracelet, nous avons décidé de réaliser le bracelet de la montre en filament souple avec un système de fixation similaire à celui d'une montre pour enfant. Ce bracelet sera adapté à la taille du poignet d'un bébé. En ce qui concerne le cadran de la montre, il sera réalisé en filament dur et plein à l'intérieur pour simuler la présence de la carte électronique que nous n'avons pas encore. Les deux modules de cette version se visseront ensemble grâce à un système de thread. Cliquez [http://a360.co/2pqrm5X ici] pour accéder à la première version de notre prototype * '''Préparation pour l'impression''' : pour convertir le fichier 3D (qui est sous le format stl) en fichier compréhensible par l'imprimante 3D on va utiliser le logiciel ''Ultimaker Cura'' qui va générer un fichier gcode. Les réglages à appliquer pour les deux pièces sont les suivants : ** Machine : Prusa i3 Mk2 ** Matériel : CPE ** Hauteur de la couche : 0.20 mm ** Hauteur initiale de la couche : 0.15 mm ** Temps d'impression du bracelet : 25 min ** Poids de matière utilisé : 3g ** Temps d'impression du cadran : 17 min ** Poids de matière utilisé : 2g * '''Problèmes rencontrés :''' Nous avons rencontré des problèmes à différents niveaux de notre prototype, les voici : ** Le fermoir n'est pas très opérationnel, c'est-à-dire que le crochet rentre correctement dans les différents trous du bracelet (le choix de la taille est donc possible) après l'avoir un peu coupé. Cependant le crochet ne tient pas assez dans les trous. ** Lorsque nous attachons le bracelet, le contour du cadran se plie à, cause de sa fine épaisseur et du filament flex. Ainsi en ajoutant la partie pleine du cadran à l'intérieur du contour, celui-ci a tendance à sauter. ** La fine couche en dessous du contour du cadran s'est mal imprimée et ne nous permettra pas de soutenir le cadran qui contiendra notre carte électronique. *'''Solutions à envisager :''' ces solutions seront réalisées lors de la prochaine version **Tout d'abord pour des raisons pratiques, il faudrait que le prototype soit adapté à la morphologie d'un adulte afin que les tests de notre carte électronique soient facilités. **Il faudrait changer le système de fermeture, nous avons pensé à utiliser des aimants au lieu du crochet et des trous. **Il faudrait séparer le bracelet du contour du cadran afin que ce dernier ne soit plus tordu lors de la fermeture du bracelet. contour du cadran afin que ce dernier ne soit plus tordu lors de la fermeture du bracelet. )
- NEXT ENGINE 3D SCANNER :How to use it + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' … * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA''' 5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
- Maquette de cartographie du Quartier Villejean Rennes + ( * 1 Panneau contreplaqué okoumé Ép.5 mm 1m x 0,61m * 1 Panneau médium (mdf) naturel, Ép.3 mm 1m x 0,61m * 1 ordinateur avec logiciel Adobe Illustrator ou Inkscape. * Découpeuse laser * Colle pour le bois )
- Openbioréacteur + ( * 1-Capteurs sans fils (hardware non impl … * 1-Capteurs sans fils (hardware non implémenté) * 2-Contrôleur chauffage, contrôleur agitation magnétique * 3-Contrôle des pompes, réception des données capteurs, et émission sur serveur annexe. * 4-Intrants La version que je présente ne comprend ni les capteurs, ni le contrôleur de chauffage, ni le contrôleur d'agitation magnétique. Ceci dans un souci de simplification. ue. Ceci dans un souci de simplification. )
- Découpage Vinyle + (<div class="icon-instructions caution-i … er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
- Découpage Vinyle + (<div class="icon-instructions caution-i … er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
- Pupitre de discours en contreplaqué de peuplier (FablabSU) + (Une fois le design finis il s'agit de modé … Une fois le design finis il s'agit de modéliser de la manière la plus réaliste possible l'objet finis, dans le but de pouvoir en tirer des plans facilement exploitable. * On commence par donner de l'épaisseur à nos différentes pièces. * On modélise ensuite le système d'accroche. Le choix s'étant porté sur l'emboitement des différentes pièces. Pour se faire je décide de faire un système d'emboitement de la matière dans des poches non traversantes (image 2). * On crée ensuite une vue éclaté et un rendu du pupitre assemblé pour bien se représenter le futur objet.é pour bien se représenter le futur objet.)
- Pupitre de discours en contreplaqué de peuplier (FablabSU) + (Une fois le design finis il s'agit de modé … Une fois le design finis il s'agit de modéliser de la manière la plus réaliste possible l'objet finis, dans le but de pouvoir en tirer des plans facilement exploitable. * On commence par donner de l'épaisseur à nos différentes pièces. * On modélise ensuite le système d'accroche. Le choix s'étant porté sur l'emboitement des différentes pièces. Pour se faire je décide de faire un système d'emboitement de la matière dans des poches non traversantes (image 2). * On crée ensuite une vue éclaté et un rendu du pupitre assemblé pour bien se représenter le futur objet.é pour bien se représenter le futur objet.)
- Laser cut Spirograph + ( * Open a new document in tinkercad * Select view TOP * ''Switch to Orthographic view'' ''Always use Shift plus Right-click to move the workplane.'' ''Use the Mouse-wheel to zoom-in zoom-out.'' )
- Design your personal logo with Tinkercad + ( * Open a new document in tinkercad * Sel … * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
- Carte de voeux de noël + ( * Découper votre feuille cartonné au format voulu )
- Carte de voeux de noël + ( * Découper votre feuille cartonné au format voulu )
- Open Workshop Setup/de + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Tree planting (Aranya Agricultural Alternatives method) + ( #If you use a bottle-irrigation system: # … #If you use a bottle-irrigation system: ##Loosen the cap to open the bottle-irrigation system, ##As you add water in the bottle, measure the amount of water added in the bottle-irrigation system: ###If the bottle was empty, increase the frequency of your examinations, ###If the bottle was not empty, reduce the frequency of your examinations; ##Tighten the cap to close the bottle-irrigation system; #If you use a clay-pot-irrigation system: ##Remove the clay plate from the clay pot to open the clay-pot-irrigation system, ##As you add water in the clay pot, measure the amount of water added in the clay-pot-irrigation system: ###If the clay pot was empty, increase the frequency of your examinations, ###If the clay pot was not empty, reduce the frequency of your examinations; ##Install the clay plate on the clay pot to close the clay-pot-irrigation system: #Else: ##If the moisture level is low, add water and increase the frequency of your examinations, ##If the moisture level is high, reduce the frequency of your examinations. reduce the frequency of your examinations. )
- Tree planting (Aranya Agricultural Alternatives method) + ( *Define the plantation zone, *Make sure t … *Define the plantation zone, *Make sure that your sapling is ready for transplantation, *Make sure that weather conditions will be favorable for the young tree to grow (avoid dry season peak), *If applicable, [[Clay-pot-irrigation system (Aranya Agricultural Alternatives method)|build your clay-pot irrigation system]], *If applicable, [[Tree planting preparation (Sadhana Forest method)|build your bottle-irrigation system]]. Feel free to adapt the procedure to your environment. to adapt the procedure to your environment. )
- Brodeuse numérique, Singer Futura XL550 + (Lorsque qu'on ouvre Futura le grand tambour s'affiche, dans notre cas nous voulons le petit, puisque qu'au début du tutoriel je vous ai indiqué de prendre le petit tambour. <br/> * Menu "outils" * "Sélectionner" le tambour * "Petit")
- Maker' pot + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
- Maker' pot + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
- Plotter de découpe - Caméo Silouhette + (Préparation de la machine : * Allumage : le bouton situé à droite de la Caméo)
- Épée pirate 3D + (Mise en peinture (les choix des couleurs ont été laissés à ma fille) Les fichiers 3D si quelqu'un veut refaire cette épée (elle est gravée au nom de ma fille, mais c'est facilement changeable via un logiciel DAO (google sketchup par exemple en gratuit).)
- Épée pirate 3D + (Mise en peinture (les choix des couleurs ont été laissés à ma fille) Les fichiers 3D si quelqu'un veut refaire cette épée (elle est gravée au nom de ma fille, mais c'est facilement changeable via un logiciel DAO (google sketchup par exemple en gratuit).)
- Créer une application avec Lora32u4 pour The Things Network + (1 - Télécharger les fichiers [http://bsfra … 1 - Télécharger les fichiers [http://bsfrance.fr/documentation/11355_LORA32U4II/driver_windows.zip Driver windows] et [http://bsfrance.fr/documentation/11355_LORA32U4II/BSFrance.zip Arduino Hardware folder] sur la page [https://bsfrance.fr/lora-long-range/1345-LoRa32u4-II-Lora-LiPo-Atmega32u4-SX1276-HPD13-868MHZ-EU-Antenna.html BSFrance] 2 - Pour les drivers, il suffit de dézipper et de cliquer sur adafruit_drivers.exe. Parmi la liste des drivers proposés, il faut choisir Feather32u4 3 - Bon, là, normalement, il est possible de brancher la carte sur le port USB de l'ordinateur. 3 - Pour les fichiers Arduino, il faut le dézipper dans le répertoire Mes Documents/Arduino/hardware (ce qui est le répertoire par défaut de l'installation de l'environnement Arduino, mais peut-être différent suivant votre installation. si le sous-répertoire hardware n'existe pas, créez le. Cette bibliothèque sert à gérer le microcontrôleur AT Mega32u4 de la carte. 4 - Démarrez l'IDE Arduino. Vous devriez pouvoir trouver la carte dans le menu Outils > Type de carte > LoRa32u4II 868 5 - Dans l'environnement Arduino, à ce stade on sélectionne le port par le menu Outils > Port, mais s'il y a eu l'erreur d'installation de pilote précédemment mentionnée, le port n'apparait pas. Il faut appuyer sur le bouton reset de la carte et sélectionner à nouveau, dans le laps de temps du reset, le menu Outils > Port. Là normalement le port devrait apparaitre quelques instants et on peut le sélectionner. 6 - Il reste encore à installer un bibliothèque : la bibliothèque LMIC qui contient les fichiers pour le protocole LoraWan. Pour cela il y a 2 méthodes : Méthode 1 : * La première est d'aller dans le menu Croquis > Inclure une bibliothèque > Gérer les bibliothèques. * Dans la barre de recherche, du gestionnaire de bibliothèque, tapez "lmic" * Choisissez d'installer le bibliothèque IBM LMIC Framework Méthode 2 : * Téléchargez l'archive du projet GitHub https://github.com/matthijskooijman/arduino-lmic dans le répertoire Mes Documents/Arduino/Libraries. Vous devriez avoir un répertoire arduino-lmic-master 7 - Lorsque cette bibliothèque est bien installée, vous pouvez choisir dans le menu Fichier > Exemples > LMIC-Arduino le sketch ttn-otaa (ou abp) pour laquelle il faut avoir une adresse réseau de la carte appelée DevAddr) La seconde est l'Over-The-Air-Activation (ou otaa). Dans ce mode DevAddr est transmis automatiquement pendant la phase d'enregistrement.</div> </div>)
- Marmite norvégienne + ('''Remarque :''' Votre petite boite doit ê … '''Remarque :''' Votre petite boite doit être plus haute que le plat d'au minimum 1 cm et être plus large de 4 cm. 1) Découper à l'aide d'une scie à bois ou d'une scie sauteuse les planches en fonction des mesures précédemment calculées. 2) Assembler les planches ensembles à l'aide de clous et d'un marteau. '''Planches obtenues pour la petite caisse''' : - 2 planches (hauteur du plat+1cm)x (longueur du plat+4cm) - 2 planches (hauteur du plat+1cm)x (largeur du plat+4cm) - 1 ou plusieurs planches (largeur du plat + 4cm)x(longueur du plat+4cm)geur du plat + 4cm)x(longueur du plat+4cm))
- FlyPi + (2- Gathering materials & Creating Part … 2- Gathering materials & Creating Parts: Not all parts are necessary to order for basic functionality. The repository has a detailed bill of materials that can be tailored to specific needs. * Electronic parts can be ordered from this kitspace page (lists have been conveniently compiled in various online market shopping carts): https://kitspace.org/boards/github.com/prometheus-science/flypi/ * 3D print files can be found in the files tab above. I started printing at the local fablab (fabrication laboratory) after ordering the parts I needed to build the microscope. This way I would have the body ready when the electronics arrived.e the body ready when the electronics arrived.)
- FlyPi + (4- Software Installation: How to install useful software on SD card)
- Plante connectée + (Nous allons faire le montage en utilisant … Nous allons faire le montage en utilisant la sortie digital (Broche 3 – D0) du capteur. Cette sortie serait connectée sur l’entrée Digital 4 du Arduino. Pour le branchement de la LED nous allons réutiliser le principe du montage « Allumer une LED » avec la sortie Digital 3 du Arduino. const int L1 = 2; // broche 2 du micro-contrôleur se nomme maintenant : L1 const int plante = 3; // broche 3 du micro-contrôleur se nomme maintenant : plante void setup() // fonction d'initialisation de la carte { // contenu de l'initialisation pinMode(L1, OUTPUT); // L1 est une broche de sortie pinMode(plante, INPUT); // plante est une broche d entree } void loop() // fonction principale, elle se repete (s execute) a l'infini { // contenu du programme int humide = digitalRead(plante); // Lecture de l etat du capteur if(humide == HIGH) // Si le capteur est a l etat haut { digitalWrite(L1, HIGH); // Allumer L1 } else // Sinon { digitalWrite(L1, LOW); // Eteindre L1 } delay(1000); // Attendre 1 seconde }non { digitalWrite(L1, LOW); // Eteindre L1 } delay(1000); // Attendre 1 seconde })
- Plante connectée + (Nous allons faire le montage en utilisant … Nous allons faire le montage en utilisant la sortie digital (Broche 3 – D0) du capteur. Cette sortie serait connectée sur l’entrée Digital 4 du Arduino. Pour le branchement de la LED nous allons réutiliser le principe du montage « Allumer une LED » avec la sortie Digital 3 du Arduino. const int L1 = 2; // broche 2 du micro-contrôleur se nomme maintenant : L1 const int plante = 3; // broche 3 du micro-contrôleur se nomme maintenant : plante void setup() // fonction d'initialisation de la carte { // contenu de l'initialisation pinMode(L1, OUTPUT); // L1 est une broche de sortie pinMode(plante, INPUT); // plante est une broche d entree } void loop() // fonction principale, elle se repete (s execute) a l'infini { // contenu du programme int humide = digitalRead(plante); // Lecture de l etat du capteur if(humide == HIGH) // Si le capteur est a l etat haut { digitalWrite(L1, HIGH); // Allumer L1 } else // Sinon { digitalWrite(L1, LOW); // Eteindre L1 } delay(1000); // Attendre 1 seconde }non { digitalWrite(L1, LOW); // Eteindre L1 } delay(1000); // Attendre 1 seconde })
- Fix Spotify Songs Disappeared + (1. The original songs and playlists may be … 1. The original songs and playlists may be deleted by their artist or creator. This mostly happens to the songs or playlists that are grayed out after you've downloaded them to your device. It's probably because that the artist or the creator of these songs or playlists does not want these tracks on Spotify for some reason. See also: Fix [https://www.tuneskit.com/spotify-music-tips/fix-spotify-greyed-out-songs.html Spotify songs greyed out] 2. Something got wrong with your Internet connection when you check or download these downloaded songs in Spotify. While you are saving any track or playlist offline on Spotify, an Internet connection is required. So you should confirm the network runs well when you are downloading the songs or playlists from Spotify. If it is this reason that causes your problem, you should download the songs again with a good internet connection. 3. Your downloads of songs from Spotify exceed the 10,000 number limit. As Spotify only allows Premium users to download up to 10,000 tracks in total, you should check whether you have hit that limit or not. If so, Spotify will delete the previously downloaded songs automatically if it finds you adding some new tracks. Normally, you'll be noticed by Spotify with a warning message once you reached this limit. 4. You may be out of Spotify Premium. So you need to verify your premium membership. You are required to log into your account online every 30 days even if you use Spotify Offline mode. Otherwise, the downloaded songs would disappear from your Spotify account. In other cases, the previously downloaded songs could become unavailable on Spotify if you changed the region of your VPN network. That's because some Spotify songs are not allowed in certain countries and regions. To get the music back again, you should change your VPN network settings.ck again, you should change your VPN network settings.)
- PP Shredder Basic + (1/2" Socket wrench 11/16" Socket" 6mm Allen/Hex Wrench Locking Pliers Adjustable pliers Metal File Screwdriver <br/>)
- Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
- Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
- Spaceship Astrokick + (3D-Print the several parts of the spaceship. This is going to take several hours per part. If your 3D printer is not big enough to place all the part at once, you can do it in two prints. <br/> *Top part: 10h *Bottom part: 10h *Dome part: 1h)
- Analyseur d'air ambiant + (<br/>
<table class="wikitable"> …
s-kubii-3272496003989.html?search_query=jumper&results=24 Câble Jumper Mâle/Femelle] </td><td>2,90€ </td></tr><tr> <td>Panneau de bois </td><td>[https://www.leroymerlin.fr/produits/menuiserie/panneau-bois-tablette-etagere-tasseau-moulure-et-plinthe/panneau-bois-agglomere-mdf/panneau-bois-recoupable/panneau-medium-mdf-naturel-ep-3-mm-x-l-244-x-l-122-cm-67458552.html Panneau MDF 3mm] </td><td>4,32€ </td></tr></table>)Matériel Liens Prix Capteur d'analyse de qualité d'air [https://www.gotronic.fr/art-capteur-de-qualite-d-air-grove-101020078-23838.htm Grove – Air quality sensor] 8,70€ Capteur de poussière [https://www.gotronic.fr/art-detecteur-de-poussiere-grove-101020012-18980.htm Grove - Dust Sensor] 13,25€ Capteur température- humidité [https://www.gotronic.fr/art-capteur-d-humidite-et-de-t-grove-101020019-18964.htm Grove - Temperature&Humidity Sensor Pro(DHT22)] 11,40€ Interface Arduino-capteurs [https://www.gotronic.fr/art-module-grove-base-shield-103030000-19068.htm Grove Base Shield] 4,80€ Ecran [https://nextion.tech/datasheets/nx4832k035/ Nextion NX4832K035] 34,85€ Câble 4 contacts [https://www.gotronic.fr/art-lot-de-5-cables-grove-20-cm-19054.htm Câble Grove 4 contacts] 3,20 Jumper [https://www.kubii.fr/site-entier/1593-fils-jumper-male-femelle-200mm-40-fils-kubii-3272496003989.html?search_query=jumper&results=24 Câble Jumper Mâle/Femelle] 2,90€ Panneau de bois [https://www.leroymerlin.fr/produits/menuiserie/panneau-bois-tablette-etagere-tasseau-moulure-et-plinthe/panneau-bois-agglomere-mdf/panneau-bois-recoupable/panneau-medium-mdf-naturel-ep-3-mm-x-l-244-x-l-122-cm-67458552.html Panneau MDF 3mm] 4,32€ - Atelier nichoir + (<div class="icon-instructions info-icon … *Tester vos paramètre de découpe, de marquage et de gravage dans du contre-plaqué de 6mm. **Suivre la [https://wikifab.org/images/c/c0/Atelier_nichoir_legende_plan_nichoir.svg][https://wikifab.org/images/1/14/Atelier_nichoir_legende_plan_nichoir2.svg Atelier_nichoir_legende_plan_nichoir2.svg] pour paramétrer la laser *Découper le document "[https://wikifab.org/images/c/c2/Atelier_nichoir_2020.03.23_plan_nichoir.svg Atelier_nichoir_2020.03.23_plan_nichoir.svg]" *Garder la contre forme de la plaque Atelier_nichoir_2020.03.23_plan_nichoir.svg]" *<u>Garder la contre forme de la plaque</u>)
- Bartop Arcade 2 joueurs + (Boutiques faboulousarcade http://ebay.to/2 … Boutiques faboulousarcade http://ebay.to/2gKd1zy Cette étape est la plus longue et fastidieuse du tuto. Armez-vous donc de patience, car c'est tout ce dont vous aurez besoin à cette étape. Rien n'est compliqué dans ces branchements mais je vous conseille toutefois de repérer chaque boutons y compris ceux des joysticks (haut, bas, gauche et droite) à l'arrière du panel. Cela vous facilitera grandement la tâche lorsque vous raccorderez le tout. La première étape consiste à relier tous les boutons entre eux à l'aide d'un câble commun. Partez donc du connecteur (commun) d'un des boutons et reliez le au suivant et ainsi de suite. Pour finir, branchez la dernière cosse sur un des ports GROUND de l'interface USB ou du Raspberry Pi. Il y plusieurs solutions pour connecter les boutons et les joysticks sur un Raspberry pi : utiliser une interface USB (souvent vendu avec le kit) ou les ports GPIOs du Raspberry Pi. Dans mon cas, j'ai utilisé l'interface USB et ai raccordé le tout au Raspberry pi. Une fois que tous les boutons et joysticks sont reliés au port GROUND par un câble commun, il suffit de relier chacun des boutons au port correspondant sur le Raspberry ou l'interface USB. Le plus compliqué dans cette étape, c'est de réussir à faire quelque chose de propre. En effet, essayez de ne pas faire passer les câbles trop près des joysticks pour éviter d'en couper un !!! Vidéo pour mieux comprendre : https://www.youtube.com/watch?v=x6Ry4bOWcR8 Pour ceux qui utilisent les ports GPIO du Raspberry, il faut penser à activer les ports GPIO dans le fichier de configuration. Recalbox possède un outil de configuration avancée nommé recalbox.conf qui vous permet de modifier des options qui ne sont pas disponibles dans emulationstation. Pour le modifier, allez dans le dossier de recalbox partagé sur le réseau local. Le fichier recalbox.conf est disponible dans le répertoire nommé system. Dans recalbox.conf, activez le pilote GPIO en réglant controllers.gpio.enabled sur 1 : controllers.gpio.enabled=1 et vous êtes prêt à jouer !gpio.enabled=1 et vous êtes prêt à jouer !)
- Bartop Arcade 2 joueurs + (Boutiques faboulousarcade http://ebay.to/2 … Boutiques faboulousarcade http://ebay.to/2gKd1zy Cette étape est la plus longue et fastidieuse du tuto. Armez-vous donc de patience, car c'est tout ce dont vous aurez besoin à cette étape. Rien n'est compliqué dans ces branchements mais je vous conseille toutefois de repérer chaque boutons y compris ceux des joysticks (haut, bas, gauche et droite) à l'arrière du panel. Cela vous facilitera grandement la tâche lorsque vous raccorderez le tout. La première étape consiste à relier tous les boutons entre eux à l'aide d'un câble commun. Partez donc du connecteur (commun) d'un des boutons et reliez le au suivant et ainsi de suite. Pour finir, branchez la dernière cosse sur un des ports GROUND de l'interface USB ou du Raspberry Pi. Il y plusieurs solutions pour connecter les boutons et les joysticks sur un Raspberry pi : utiliser une interface USB (souvent vendu avec le kit) ou les ports GPIOs du Raspberry Pi. Dans mon cas, j'ai utilisé l'interface USB et ai raccordé le tout au Raspberry pi. Une fois que tous les boutons et joysticks sont reliés au port GROUND par un câble commun, il suffit de relier chacun des boutons au port correspondant sur le Raspberry ou l'interface USB. Le plus compliqué dans cette étape, c'est de réussir à faire quelque chose de propre. En effet, essayez de ne pas faire passer les câbles trop près des joysticks pour éviter d'en couper un !!! Vidéo pour mieux comprendre : https://www.youtube.com/watch?v=x6Ry4bOWcR8 Pour ceux qui utilisent les ports GPIO du Raspberry, il faut penser à activer les ports GPIO dans le fichier de configuration. Recalbox possède un outil de configuration avancée nommé recalbox.conf qui vous permet de modifier des options qui ne sont pas disponibles dans emulationstation. Pour le modifier, allez dans le dossier de recalbox partagé sur le réseau local. Le fichier recalbox.conf est disponible dans le répertoire nommé system. Dans recalbox.conf, activez le pilote GPIO en réglant controllers.gpio.enabled sur 1 : controllers.gpio.enabled=1 et vous êtes prêt à jouer !gpio.enabled=1 et vous êtes prêt à jouer !)
- Bentolux - BentoGhooost + (= Fabrication 3ème étage = 1. Fabrication … = Fabrication 3ème étage = 1. Fabrication à la découpeuse laser. * Plan à télécharger : [https://wikifab.org/images/d/df/BentoGhost_volume1.svg BentoGhost_volume1.svg] (clic droit / enregistrer le fichier sous) 2. Découpage et collage des morceaux * Bien penser à supprimer les écritures permettant d'identifier les faces avant la découpe * Bois utilisé : contreplaqué peuplier 3 mm * Réglages utilisés sur la PerezCamp 140 W ** puissance max : 40 % ** puissance min : 30 % ** vitesse : 40 mm / s * L'assemblage est expliqué avec les photos BentoGhost02 à BentoGhost04 ** Coller les éléments avec de la colle à bois * ''Le plancher qui supporte le mécanisme est décrit à l'étape suivante'' 3. Découpe des fantômes, dans du plexiglas 3 mm * Plan à télécharger : [https://wikifab.org/images/b/b9/BentoGhost_fantomes.svg BentoGhost_fantomes.svg] (clic droit / enregistrer le fichier sous) * Remarque : les 4 fantômes découpés dans la boite sont en haut de dessin, mais vous pouvez sélectionner ceux que vous voulez à partir du moment où ils sont de la même forme que ceux de la boîte * L'assemblage est expliqué avec les photos BentoGhost05 à BentoGhost07 ** Remarque : les fantômes peuvent également être collés à la colle à bois. Il faut bien les nettoyer tout de suite pour ne pas avoir de résidus de colle sur le plexiglas.voir de résidus de colle sur le plexiglas.)
- Thermostat control activity v12 + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
- Implementing Web Server on ESP32 + (=== What is a Web Server? === A web server … === What is a Web Server? === A web server is a software application that serves web pages to users. When a user requests a web page, the web server processes the request and sends the requested page back to the user’s browser. This forms the backbone of data communication on the World Wide Web. === What is ESP32? === The ESP32 is a series of low-cost, low-power systems on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor and includes built-in antenna switches, an RF balun, a power amplifier, a low-noise receiver amplifier, filters, and power management modules. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming.e demanding tasks such as music streaming.)
- PP Extruder Pro + (==== Tools ====
1/2" Socket
==== Parts == … ==== Tools ====
1/2" Socket
==== Parts ====
2x 1000mm 4080 extrusion
4x 300mm 4040 extrusion
40x t-nuts
22x M8x20 bolts
22x M8 Washers
12x Corner Brackets
==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)uts. (as seen in the right two beams in image 3)) - Robot "ABC" in wood + (<div class="mw-translate-fuzzy"> Let's start with the base by adding support with it's stack connected to the 3 green LEDs. </div> <div class="mw-translate-fuzzy"> Take 4 screws M4 insert them in the 4 holes then fix 1 nut on each screws. </div>)
- Arc-en-ciel avec Arduino + (A travers le plastique translucide du DEL, … A travers le plastique translucide du DEL, vous pouvez observer 2 parties distinctes, elles ont chacune leur polarité, anode + et cathode moins. La branche métallique la plus courte est la polarité négative (vers la masse) et la plus longue rejoint la polarité + (source d'alimentation)., cela vous aide visuellement à savoir dans quel sens l'intégrer dans votre circuit.s quel sens l'intégrer dans votre circuit.)
- Capteur de CO2 connecté + (Afin de mener à bien ce montage, il est né … Afin de mener à bien ce montage, il est nécessaire de disposer des éléments suivants : * Un capteur de dioxyde de carbone, ou "CO2" de type "[https://revspace.nl/MH-Z19B MH-Z19B]", disponible par exemple sur aliexpress (item/32823821163). * Un microcontrôleur avec connexion WiFi de type ESP8266 "Wemos D1 Pro" comme l'item 32653918483 sur aliexpress (la carte complète) * Le firmware '''[https://tasmota.github.io/docs/ Tasmota]''' pour faire fonctionner le microcontrôleur. * Une alimentation USB, de type "chargeur de téléphone" * Un câble USB permettant de connecter le microcontrôleur au PC qui de pouvoir effectuer les configurations. * Une plateforme web permettant d'enregistrer et d'afficher les données. Il est possible d'en installer une chez soi avec le '''système [https://my.inizisoft.net/grav/enez enez]'''. Un tuto sera bientôt disponible pour expliquer comment monter une telle plateforme. Des services de ce type sont aussi disponibles sur Internet, comme par exemple [https://mydevices.com/ Cayenne]. exemple [https://mydevices.com/ Cayenne].)
- Controleur de pH + (Avant de commencer les raccordements, nous avons pris des planches de bois et de plexiglas qui serviront de support. les découpes ont été effectué à l'aide d'une découpeuse laser.)
- Guide on how to Permanently Add Subtitles to MP4 + (After downloading and installing Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner], run it. Then you can add MP4 files to Joyoshare with 2 ways: Drag and drop MP4 video to the left screen; Select from the local folder.)
- FLAC Joiner to Join FLAC Files in Original Quality + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
- How to Play Amazon Music on Google Home + (After downloading and installing of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Converter], double-tap to start it. Next, you will be navigated to the Amazon Music web player. Locate the "Sign In" option to access your Amazon account.)
- Manipulate the CubePro Trio + (After downloading the program and installing it using it's serial number and activating it, we must launch the program.)
- How to Burn Spotify Playlist to CD + (After getting your computer equipped with … After getting your computer equipped with AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Music Downloader], double-click to open it. AudFree establishs intergration with Spotify. So running AudFree Spotify software will start the Spotify app. Search tracks or playlists that you want to burn to CD from Spotify music library. Then, copy the link to paste onto the search box of AudFree and click "+" icon to add Spotify music to AudFree. Alternatively, directly drag and drop.ee. Alternatively, directly drag and drop.)
- How to Play Spotify on Squeezebox + (After opening this [https://www.tuneskit.c … After opening this [https://www.tuneskit.com/spotify-music-tips/download-spotify-playlist-to-mp3.html Spotify to MP3 downloader], Spotify will be automatically started. Then you can search and find the Spotify track or playlist you want to play on Squeezebox and drag them to the screen of this Spotify Music Converter directly.o the screen of this Spotify Music Converter directly.)
- Play Tidal Songs on Roku TV + (After the download and installation of the … After the download and installation of the TuneCable program. Run it and choose a download mode from the main interface. The app mode needs the TIDAL app to run and can save up to Tidal Max (up to 24-bit/192kHz) music at 5x or 1x (for Mac) the speed, while the web player mode works via the built-in Tidal web player and can retain Tidal High (16-bit/44.1kHz) quality music at 10x fast speed. Pick the one you prefer, and sign in to your Tidal Free, HiFi, or HiFi Plus account.ur Tidal Free, HiFi, or HiFi Plus account.)
- Tidal Alexa - How to Add Tidal to Alexa + (After the installation, please double-clic … After the installation, please double-click to start [https://www.audfree.com/tidal-music-converter-win/ AudFree Tidal Music Downloader]. And then, the Tidal app will open automatically. Find Tidal songs that you want to play on Alexa, copy and paste the link of Tidal track in the search bar of AudFree's main interface, and click "+" for loading.main interface, and click "+" for loading.)
- Intime + (Afin de s'assurer de l'utilisation des ban … Afin de s'assurer de l'utilisation des bandeaux de led adressables WS2812B nous avons effectué plusieurs tests sur l'IDE Arduino. Nous avons utilisé la bibliothèque Adafruit_NeoPixel. Cette dernière est très facile à utiliser et voici plusieurs liens expliquant clairement son utilisation : http://www.fablabredon.org/wordpress/2017/12/17/lumiere-sur-larduino-avec-de-la-couleur-et-des-led/ https://www.tweaking4all.com/hardware/arduino/arduino-ws2812-led/ Les tests lumineux les plus basiques ont d'abord été réalisés : allumage des leds, variations des couleurs, du nombre des leds, allumage de led précises. Par la suite, nous avons travaillé sur différents effets. Les effets fournis par la bibliothèque ne répondant pas complètement totalement à nos besoins (utilisation de delay provoquant des pauses lors du programme, pas de contrôle des paramètres des effets tels que le temps de parcours etc ...), nous avons décidé de commencer à coder nos propres effets. Les effets créés ont été les suivants : parcours des leds sur la longueur du bandeaux pendant une durée correspondant à un pouls donné, parcours symétrique de deux bandeaux à partir du centre (pouls des utilisateurs synchronisés). Les différents problèmes rencontrés ont été les suivants : dernières led restant allumées, effet saccadé ... Les différents solutions trouvées ont été d'utiliser plusieurs leds pour les parcours à intensité variées afin de donner un effet plus fondu, de trouver les bonnes bornes des boucles de parcours (arrêt avant le nombre total de led). Les vidéos montrées issues ont été effectuées après l'achat d'un néon (cf section design de l'objet). d'un néon (cf section design de l'objet).)
- Intime + (Afin de s'assurer de l'utilisation des ban … Afin de s'assurer de l'utilisation des bandeaux de led adressables WS2812B nous avons effectué plusieurs tests sur l'IDE Arduino. Nous avons utilisé la bibliothèque Adafruit_NeoPixel. Cette dernière est très facile à utiliser et voici plusieurs liens expliquant clairement son utilisation : http://www.fablabredon.org/wordpress/2017/12/17/lumiere-sur-larduino-avec-de-la-couleur-et-des-led/ https://www.tweaking4all.com/hardware/arduino/arduino-ws2812-led/ Les tests lumineux les plus basiques ont d'abord été réalisés : allumage des leds, variations des couleurs, du nombre des leds, allumage de led précises. Par la suite, nous avons travaillé sur différents effets. Les effets fournis par la bibliothèque ne répondant pas complètement totalement à nos besoins (utilisation de delay provoquant des pauses lors du programme, pas de contrôle des paramètres des effets tels que le temps de parcours etc ...), nous avons décidé de commencer à coder nos propres effets. Les effets créés ont été les suivants : parcours des leds sur la longueur du bandeaux pendant une durée correspondant à un pouls donné, parcours symétrique de deux bandeaux à partir du centre (pouls des utilisateurs synchronisés). Les différents problèmes rencontrés ont été les suivants : dernières led restant allumées, effet saccadé ... Les différents solutions trouvées ont été d'utiliser plusieurs leds pour les parcours à intensité variées afin de donner un effet plus fondu, de trouver les bonnes bornes des boucles de parcours (arrêt avant le nombre total de led). Les vidéos montrées issues ont été effectuées après l'achat d'un néon (cf section design de l'objet). d'un néon (cf section design de l'objet).)
- How to Play Spotify to Yoto Player without Premium + (<nowiki>Once the Spotify music you w …
Once the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music. ' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.<br /><br /><br/></nowiki>)
'''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.
'''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.
'''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.
'''Step 4.''' Select ''''Add Audio'''' from the options.
'''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.
'''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).
'''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.
'''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app. - Fablab + Lakehub + (At the group forming stage we decided to b … At the group forming stage we decided to brainstorm on the possible project ideas before splitting. Out of all the ideas around health, the self-testing gadget was decided on. During brainstorming, the challenges in health which we were struggling to get solutions were; teenage pregnancy, More affordable and easily available PPEs for the health providers in the frontline, People Living With Disability, time management in the hospital to enable more patients to be served within the shortest time, real-time billing challengeshortest time, real-time billing challenges)
- MUTED - boitier biodata vers module de synthétiseur analogique + (Attention, il faut d'abord être capable de … Attention, il faut d'abord être capable de brancher une plante sur une carte électronique pour capter et transformer de minuscules variations électriques. Ceci vous prendra entre deux heures et une demi-journée [http://wikifab.org/wiki/Capteur_BioData_pour_ESP32 en suivant le tuto de Stéphane Godin.]P32 en suivant le tuto de Stéphane Godin.])
- Bartop 2 joueurs - Découpe laser + (Une fois les pièces fraisées, vous pouvez commencer par assembler les deux pièces du dos ensemble par des vis 10mm. Attention toutefois à bien aligner les deux pièces du dos par le bord plat du haut (voir photo).)
- Stick Arcade 2 joueurs - Découpe laser + (Coupez un total de 2 tasseaux de 19,2cm chacun. Sur chaque extrémité de chaque tasseau, marquez le centre de chaque côté. Munissez-vous de votre visseuse équipée d'une mèche bois de Ø 3mm et faites prétrouez les deux tasseaux aux endroits marqués.)
- Borne d'arcade + (Avant de commencer, il faut trouver ou tra … Avant de commencer, il faut trouver ou tracer des plans pour son bartop (la partie haute de la borne donc). Pour ma part je me suis inspiré des plans fournis par [https://fr.scribd.com/document/399080507/arcade-plans-package-8-5x11-print-updated-november-2016-pdf Ronildo Brandao]. Après les avoir imprimé et scotchés, puis reproduits sur des grandes feuilles A2, j'ai construit une magnifique maquette en carton, taille réelle, pour avoir une idée de la place que cela prendrait, de la taille d'écran que je pourrai mettre, et de la largeur disponible pour que deux grandes personnes puissent se lancer des Hadoken confortablement. Donc on imprime, on trace, on coupe, et on construit...me, on trace, on coupe, et on construit...)
- Timer : An Arduino based Timer + (Vous avez trois boutons : PLUS (connecté … Vous avez trois boutons : PLUS (connecté à la broche 3 ) doit incrémenter la durée que vous voyez affichée sur l'afficheur LCD. MOINS (connecté à la broche 2 ) fait l'inverse. START (connecté à la broche 4 ) lance le compte à rebours et donc allume l'anneau de leds. Si ca ne marche pas : * Vérifiez votre câblage fil par fil en reprenant tout depuis de début * Vérifiez que votre Arduino est branché * Vérifiez que le code a bien été téléversé dans la carte * Demandez à quelqu'un de vérifiez votre câblage (souvent ça aide) ''Temps indicatif : 2 min''vent ça aide) ''Temps indicatif : 2 min'')
Français
English
Deutsch
Español
Italiano
Português