Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• The Things Network  + (Pour pouvoir utiliser le Raspberry Pi il f … Pour pouvoir utiliser le Raspberry Pi il faut au préalable écrire l'image Raspbian sur la carte SD. Mais ce n'est pas l'objet de ce tuto... Pour la version choisissez de télécharger '''"RASPBIAN"''' sur cette page : https://www.raspberrypi.org/downloads/ Cette version de Rapsbian ne possède pas d'interface graphique mais nous n'en aurons pas besoin.raphique mais nous n'en aurons pas besoin.)
• Déployer une passerelle LoRaWAN pour The Things Network  + (Pour pouvoir utiliser le Raspberry Pi il f … Pour pouvoir utiliser le Raspberry Pi il faut au préalable écrire l'image Raspbian sur la carte SD. Mais ce n'est pas l'objet de ce tuto... Pour la version choisissez de télécharger '''"RASPBIAN"''' sur cette page : https://www.raspberrypi.org/downloads/ Cette version de Rapsbian ne possède pas d'interface graphique mais nous n'en aurons pas besoin.raphique mais nous n'en aurons pas besoin.)
• Créer un sticker amusant  + (Préparer à l'avance des formes simple ex: cercle)
• Losslessly Combine WebM Files in 2020  + (Quickly download and install Joyoshare [ht … Quickly download and install Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner] on Windows or Mac. After that, you should open it and click "Open File" to choose your WebM files. Alternatively, you can drag and drop files from desktop to the program.nd drop files from desktop to the program.)
• Humanure Dry Toilets, low-tech tricks  + (Refer to the pictures available in the gal … Refer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
• Humanure Dry Toilets, low-tech tricks  + (Refer to the pictures available in the gal … Refer to the pictures available in the gallery. Proceed as follows to build you own Humanure Dry Toilets. = Required Conditions = *Team: **Two *Required skills: **Basic carpentry skills to properly use the tools *Duration: **Two hours *Preliminary requirements: **NA (except acquire the necessary parts and consumables)quire the necessary parts and consumables))
• Colons de Catane  + (Vous devrez utiliser du carton bois 0,75 m … Vous devrez utiliser du carton bois 0,75 mm. [http://www.rougier-ple.fr/cart-bois-pf-60x80.r.html Voici la référence que j'ai utilisée]. Faites attention aux réglages de la machine pour ne pas mettre le feu au carton. Pour les customiser, vous pouvez les bomber totalement ou seulement la tranche.bomber totalement ou seulement la tranche.)
• Colons de Catane  + (Vous devrez utiliser du carton bois 0,75 m … Vous devrez utiliser du carton bois 0,75 mm. [http://www.rougier-ple.fr/cart-bois-pf-60x80.r.html Voici la référence que j'ai utilisée]. Faites attention aux réglages de la machine pour ne pas mettre le feu au carton. Pour les customiser, vous pouvez les bomber totalement ou seulement la tranche.bomber totalement ou seulement la tranche.)
• Paracock  + (Se rendre sur le site Paracocktail en bas de page : https://hackpad.com/Paracocktailemoji_2614-U7CYk0n7UM9 Vous y trouverez le lien pour télécharger le lien Arduino, appuyez sur "JUST DOWNLOAD".)
• Paracock  + (Se rendre sur le site Paracocktail en bas de page : https://hackpad.com/Paracocktailemoji_2614-U7CYk0n7UM9 Vous y trouverez le lien pour télécharger le lien Arduino, appuyez sur "JUST DOWNLOAD".)
• Mighty maker level belt  + (Set up a temporary circuit using a bread b … Set up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
• Contrôler des neopixels comme un DJ  + (Si vous ne l'avez pas fait, ajouter le sup … Si vous ne l'avez pas fait, ajouter le support de l'ESP8266 dans le logiciel Arduino : [https://github.com/esp8266/Arduino#installing-with-boards-manager https://github.com/esp8266/Arduino#installing-with-boards-manager.] Il y a plusieurs façons d'uploader le firmware que nous allons utiliser, le plus simple est d'utiliser l'exemple '''ESP8266WebServer -> WebUpdate.''' N'oubliez pas de changer STASSID et STAPSK avec le nom de votre réseau Wi-Fi et votre mot de passe. #define STASSID "your-ssid" #define STAPSK "your-password" * Téléverser '''ESP8266WebServer -> WebUpdate.''' * Appuyer sur le bouton RESET de l'ESP8266. * Aller sur http://esp8266-webupdate.local.266. * Aller sur http://esp8266-webupdate.local.)
• Contrôler des neopixels comme un DJ  + (Si vous ne l'avez pas fait, ajouter le sup … Si vous ne l'avez pas fait, ajouter le support de l'ESP8266 dans le logiciel Arduino : [https://github.com/esp8266/Arduino#installing-with-boards-manager https://github.com/esp8266/Arduino#installing-with-boards-manager.] Il y a plusieurs façons d'uploader le firmware que nous allons utiliser, le plus simple est d'utiliser l'exemple '''ESP8266WebServer -> WebUpdate.''' N'oubliez pas de changer STASSID et STAPSK avec le nom de votre réseau Wi-Fi et votre mot de passe. #define STASSID "your-ssid" #define STAPSK "your-password" * Téléverser '''ESP8266WebServer -> WebUpdate.''' * Appuyer sur le bouton RESET de l'ESP8266. * Aller sur http://esp8266-webupdate.local.266. * Aller sur http://esp8266-webupdate.local.)
• SoundCloud VS Spotify in 2021  + (SoundCloud has over 175 million listeners. … SoundCloud has over 175 million listeners. SoundCloud's boost of users is possibly from a large number of independent music makers who want to build their music career. Spotify boasts of 365 million users. Spotify has the broadest reach and its users spread over the world. And this will definitely make it more and more popular.  efinitely make it more and more popular.  )
• Pandora vs Spotify in 2021  + (Spotify has a vast number of songs in its … Spotify has a vast number of songs in its ever-growing music library, which already reaches 70 million tracks. While Pandora catalog in its existence having one to two million songs making it hard to prevail Spotify. Only Apple Music has managed to overcome Spotify on this aspect with other competitors still struggling with a little degree of success. Spotify Premium also boasts of a wide range of remixes and covers which you can never find in Pandora Premium. However, both Spotify and Pandora Premium music library are comparable even though the fact remains Spotify holds the lead.h the fact remains Spotify holds the lead.)
• Make Collaborative Playlists on Spotify  + (Step 1. In the left panel, right-click a playlist you wish to open. Step 2. Select 'Collaborative Playlist'. Step 3. Right-click on the playlist again, then scroll down to 'Share'. Step 4. Choose 'Copy Playlist Link' then send it to your friends.)
• How to create a 3D sculpture  + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
• How to create a 3D sculpture  + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model  EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
• Mini écran connecté  + (IFTTT est un service qui permet d'automati … IFTTT est un service qui permet d'automatiser des tâches, Adafruit IO est compatible avec celui-ci.
  Si vous voulez utiliser IFTTT avec votre propre serveur, il y a des webhooks qui permettent de faire cela.
  Nous allons voir comment afficher les notifications d'un smartphone sur notre écran.
  Bien que ce soit amusant comme projet, n'oubliez pas que vous allez donner accès à vos notifications à deux services sur internet. Même si les communications sont en théorie sécurisée, niveau vie privée c'est une très mauvaise idée.
  *Créer un compte sur IFTTT *Installer l'application android '''if''' *Sur l'interface web d'IFTTT, cliquer sur '''My Applets''' *Cliquer sur '''New Applet''' *Choisissez le service '''Android Device''' *Choisissez '''Notification Received''' '''then''' *Choisissez '''Adafruit''' *Choisissez '''Send data to Adafruit IO''' *Dans '''Feed Name''' mettez '''notifications''' *Dans '''Data to save''' choisisez '''AppName''' et '''Notification''' '''Title'''
  L'ESP8266 va se déconnecter (puis se reconnecter) du serveur MQTT, si le message est trop long.
  
  Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.
  le message est trop long.</div> </div><br/>Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.<br/>)
• Mini écran connecté  + (IFTTT est un service qui permet d'automati … IFTTT est un service qui permet d'automatiser des tâches, Adafruit IO est compatible avec celui-ci.
  Si vous voulez utiliser IFTTT avec votre propre serveur, il y a des webhooks qui permettent de faire cela.
  Nous allons voir comment afficher les notifications d'un smartphone sur notre écran.
  Bien que ce soit amusant comme projet, n'oubliez pas que vous allez donner accès à vos notifications à deux services sur internet. Même si les communications sont en théorie sécurisée, niveau vie privée c'est une très mauvaise idée.
  *Créer un compte sur IFTTT *Installer l'application android '''if''' *Sur l'interface web d'IFTTT, cliquer sur '''My Applets''' *Cliquer sur '''New Applet''' *Choisissez le service '''Android Device''' *Choisissez '''Notification Received''' '''then''' *Choisissez '''Adafruit''' *Choisissez '''Send data to Adafruit IO''' *Dans '''Feed Name''' mettez '''notifications''' *Dans '''Data to save''' choisisez '''AppName''' et '''Notification''' '''Title'''
  L'ESP8266 va se déconnecter (puis se reconnecter) du serveur MQTT, si le message est trop long.
  
  Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.
  le message est trop long.</div> </div><br/>Votre applet devrait ressembler à ceci. Aller sur votre téléphone, lancer IFTTT et autoriser '''l'accès aux notifications'''.<br/>)
• Arbre multimédia  + (Vous trouverez ici l'image que nous utilisons sur nos cartes SD : Mais voici les sources pour installer vous même la distribution linux sur votre raspberry)
• SunZilla - Guide 4: Solar box  + (To physically anchor the the boxes togethe … To physically anchor the the boxes together, the joins need to be added. The joins hold the boxes in place on a wooden foot structure. This structure can be CNC-milled with the provided .DMX source file, which you can download below. You can also old-school wood-craft them, following the .PDF technical drawing, also downloadable below. After milling the foot structure, put the boxes in their places and drill 4 holes through the outside bottom rim of each box and the underlying wooden structure. Using these holes, the different parts are connected by a bent bicycle spoke. The shape of the spoke can be seen in the following figure. The shape of the spoke can be seen in the following figure bellow. The height of the “mouth” of the bent spoke depends on the thickness of the wooden foot (see diagram). It should 2-4 mm less than the added thickness of the box and the wooden foot. To bend the spoke, start from one side of the spoke and do one bending after the other by holding the spoke with pliers and bending then the longer end of the spoke with your hand in the shape you like.poke with your hand in the shape you like.)
• EMI probe 12+ activities  + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
• PiKon telescope  + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
• Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
• Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
• Buzzing Bee Circuit  + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link This CAD will need to be saved as a .stl file Open the .stl file in the printer software for your printer After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
  created file to the printer. PRINT! <br/>)
• How to Download Spotify to MP3 in 320kbps High Quality  + (The best Spotify to MP3 320kbps downloader … The best Spotify to MP3 320kbps downloader is the [https://www.audkit.com/spotilab-music-converter.html AudKit Spotify Music Converter]. It can download '''any audio content''' including songs, playlists, podcasts, albums, and audiobooks from Spotify to '''MP3, AAC, M4A, M4B, FLAC, and WAV''' at '''5X''' '''in batches'''. It allows '''all Spotify users''' including those free users to download Spotify music '''without Spotify Premium'''. You don't need to worry about the audio quality since it can retain '''100% lossless sound quality''' and '''full ID3 tags''' (i.e., title, artist, cover, year). This great tool also endows you with the ability to change the output quality parameters such as the '''bit rate, sample rate, channel''', and the like. Before using it, please go to the [https://www.audkit.com/ AudKit.com] to install this powerful downloader on your '''Windows PC or MacBook'''.oader on your '''Windows PC or MacBook'''.)
• How to Make Amazon Music Louder  + (The first and most straightforward way to … The first and most straightforward way to make Amazon Music louder is by adjusting the volume settings on your device. Whether you're using a smartphone, tablet, or computer, there should be dedicated volume controls that allow you to increase the sound output. Simply locate the volume buttons or slider and turn them up to your desired level. Keep in mind that you can also adjust the volume within the Amazon Music app itself for finer control.Amazon Music app itself for finer control.)
• DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
• DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
• How to Combine Clips in iMovie  + (The first thing to do is running iMovie on your Mac computer. Then you need to click on "File" and choose "New Project" to begin a new project. After that, you can name the project and adjust some settings according to your desires.)
• Colorado Top Bar Assembly  + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
• DIY Makey Makey with Arduino Leonardo  + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
• Arduino to ThingSpeak via SIM800 No Wi-Fi  + (The legacy project documents that were ori … The legacy project documents that were originally designed with the SIM800 module may necessitate slight adjustments. This project will prove invaluable to those who continue to rely on 2G and GPRS technology. It offers essential support and guidance for individuals who intend to persist with these communication methods. Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800, is a fundamental concept. The crucial aspect is that this communication method operates independently of Wi-Fi, constituting an IoT connectivity solution that relies on GPRS for data transmission. 1 / 2 In this project, LM35 temperature sensor data is being transmitted to the ThingSpeak platform through an Arduino Nano and a SIM800 module. The SIM800 module is leveraged to establish a GPRS connection, facilitating the transmission of data to ThingSpeak at specified intervals. To ensure a reliable connection between ThingSpeak and the hardware, users must configure the SIM800 module to establish a connection with their mobile network. This configuration encompasses setting the Access Point Name (APN) specific to their mobile carrier. It's important to note that the specific AT commands for this configuration may vary based on the user's chosen mobile network provider. For this project, I utilized the services of the network provider '''Airtel''' to establish the connection. Communication between the hardware components, specifically the SIM800 module, Arduino Nano, and ThingSpeak platform, relies entirely on AT commands. To ensure successful project implementation and effectively troubleshoot any issues that may arise, users must possess a basic understanding of SIM800 AT commands. This knowledge is crucial for configuring, managing, and diagnosing the communication process and resolving potential challenges during the project.g potential challenges during the project.)
• How to Get Spotify Mini Player on Windows and Mac  + (The official Spotify desktop app doesn’t o … The official Spotify desktop app doesn’t offer a mini player, but you can get it on your computer in several ways, here’s how. = 1. Get Spotify Mini Player on Chrome = Chrome is not only a mighty web browser, but also can be a great Spotify music player. Spotify provides web player for both free and Premium to access Spotify music which is way easier than installing the desktop app. And you can get a mini player on web player. '''1.''' Open Chrome and type in ''open.spotify.com'' to get Spotify web player. '''2.''' Sign in your Spotify account and play a song, then click on the mini player icon next to the album art to open Spotify mini player. '''3.''' A small window with the album art will pop up and be pinned to the front of the screen. You can play, pause or skip through songs using this mini player. = 2. Lofi Spotify Mini Player = Lofi is a compact desktop client that can play Spotify songs with a window that only takes up 150X150 pixels of the screen. Go to ''lofi.rocks'' to download the app and log in with your Spotify account. Then you can play, stop, skip forwards and backwards in its tiny interface displays with album artwork. It also creates visualizations, you can choose one among Blue Wave, Rainbow Road, String Theory and seascape. Rainbow Road, String Theory and seascape.)
• OpenKnit: digital fabrication tool to create your own clothes  + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
• Ultimate Guide to Fix Tidal Not Playing Songs  + (The tidal app for music streaming is now a … The tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
• How to Play Spotify on Yoto Player  + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
• Geiger counter  + (This is a timelapse of the assembly process of the geiger counter)
• 8bits & Chocolate - decorative candy dispenser  + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
• How to Listen to Tidal on Multiple Devices Simultaneously  + (Tidal offers several major plans for you t … Tidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month. # If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days. # If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus. # To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family. # After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
  '' from Family Hi-Fi or Hi-Fi Plus. <br/>)
• How to Play Tidal on Galaxy Watch  + (To begin using Tidal on your Galaxy Watch, … To begin using Tidal on your Galaxy Watch, you'll need to download and install the Tidal app. Follow these steps to get started: '''Step 1: Open the Galaxy Wearable App''' First, open the Galaxy Wearable app on your smartphone. This app allows you to manage and install applications on your Galaxy Watch. '''Step 2: Find and Install the Tidal App''' In the Galaxy Wearable app, navigate to the "Galaxy Store" section. Search for the Tidal app using the search bar and select it from the search results. Tap on "Install" to begin the installation process. '''Step 3: Sign in to your Tidal Account''' Once the Tidal app is installed on your Galaxy Watch, open it, and sign in using your Tidal account credentials. If you don't have a Tidal account yet, you can create one directly from the app.
  n create one directly from the app. <br/>)
• Snap circuits activities for 12+  + (To begin with, kids will need to build or … To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
• How to Download Spotify Podcast to MP3 in 2024  + (Now, let's walk through the stepwise guide … Now, let's walk through the stepwise guide on how to download your favorite Spotify podcasts to MP3 using the AudFun Spotify Music Converter: Step 1. Go to [https://www.audfun.com/ AudFun.com] and install this software on a Windows or Mac. Step 2. '''Drag and drop''' the episodes or the whole podcast from the Spotify app to the screen of AudFun to load all episodes. Step 3. Tap on the top-right '''Menu''' tab and pick '''Preferences''' > '''Convert'''. Then you can select the '''Format''' as MP3 and customize the '''Bit Rate''' as 320kbps. Step 4. Once set, hit the '''Convert''' button at the bottom right on AudFun. This software will work at 5X to download all added podcasts in batches to MP3.ownload all added podcasts in batches to MP3.)
• How to Play Apple Music Soundtrack in GTA5  + (To enjoy your Apple Music library while pl … To enjoy your Apple Music library while playing GTA 5, you'll first need to convert your Apple Music tracks into a compatible format. The best tool for this job is [https://www.audfree.com/auditior AudFree Apple Music Converter]. This powerful software allows you to convert Apple Music songs into formats like MP3 or M4A, making them compatible with GTA 5. Here's why AudFree Apple Music Converter stands out: 1) '''Convert encrypted Apple Music content to various formats:''' AudFree Apple Music Converter can convert all content from Apple Music to unprotected MP3, FLAC, WAV, AAC, M4A, and M4B files. 2)  '''Keep lossless audio quality:''' This expert tool ensures that your tracks are converted with the original quality audio, preserving the integrity of your music. 3) '''Support batch conversion at 30X speed:''' The software is user-friendly, and the conversion process is quick at up to 30X faster speed. It enables you to convert unlimited number of tracks together. 4) '''Preservation of Metadata Info:''' It retains important song metadata information. With it,  ID3 tags such as artist, album, and cover art will be retained, ensuring your GTA 5 experience is as immersive as possible. 5) '''Play Apple Music without premium:''' Once converted, you can keep the Apple Music conversions forever. That means you can play those unprotected Apple Music audio files at all devices and players whenever you like.io files at all devices and players whenever you like.)
• Timelapes with Raspberry Pi Camera  + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
• Pavé Numérique MIDI  + (Souder les headers sur la stripboard, vous … Souder les headers sur la stripboard, vous pouvez vous aider de l’arduino micro pour ne pas vous tromper sur l’espacement (de 5 cases entre les deux) ''Personnellement, je n’ai pas utilisé de headers pour l’afficheur OLED, car j’avais retiré les broches.''ur OLED, car j’avais retiré les broches.'')
• Pavé Numérique MIDI  + (Vous pouvez soit coller le keypad (avec un pistolet à colle à chaud) où soit le visser en faisant des trous sur la stripboard. Il vaut mieux fixer le keypad avant de souder les câbles pour pouvoir plus facilement vérifier la longueur des câbles.)
• ShadeBox  + (Choisir la carte ESP32 (Outils -> Type … Choisir la carte ESP32 (Outils -> Type de carte -> ESP32 Module). Télécharger le code à l'adresse suivante : [https://l.facebook.com/l.php?u=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0&h=ATOeyxhqj3OFVRNEAhPL5HtK39aj6nEVcym_XhnVPXHsVbJk1ukNCBXbPrnILPPdc8umjD1T75uPT22SuKkK9BkLMSQgAiXRqSe6S9H8UXOYCe0JtDBEDs07jXVp1Kh7sEthh7Bl9Y4ygfnehQA4PcBKQZc drive.google.com/open?id=1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0]. Téléverser le code fourni sur la ESP3. Si ça ne marche pas, vérifier que le bon port série soit affecter (Outils -> Ports série).on port série soit affecter (Outils -> Ports série).)
• ShadeBox  + (Choisir la carte ESP32 (Outils -> Type … Choisir la carte ESP32 (Outils -> Type de carte -> ESP32 Module). Télécharger le code à l'adresse suivante : [https://l.facebook.com/l.php?u=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0&h=ATOeyxhqj3OFVRNEAhPL5HtK39aj6nEVcym_XhnVPXHsVbJk1ukNCBXbPrnILPPdc8umjD1T75uPT22SuKkK9BkLMSQgAiXRqSe6S9H8UXOYCe0JtDBEDs07jXVp1Kh7sEthh7Bl9Y4ygfnehQA4PcBKQZc drive.google.com/open?id=1LYvDXH7z0-pO_Zc277ANGW5R21F2FPL0]. Téléverser le code fourni sur la ESP3. Si ça ne marche pas, vérifier que le bon port série soit affecter (Outils -> Ports série).on port série soit affecter (Outils -> Ports série).)
• TonUINO  + (Vous allez devoir aller télécharger l’[htt … Vous allez devoir aller télécharger l’[https://github.com/tonuino/TonUINO-TNG archive TonUINO sur Github]. Pour ce faire, cliquez sur le bouton « code », puis « Download zip ». De base, tout est en allemand. Pour que l’utilisation de votre TonUINO soit plus simple à terme, je vous recommande de télécharger les fichiers audio en français à partir de [https://oc.gryzan.de/s/bdjoMEsKLWbo7cX ce lien. ] Vous pourrez utiliser le contenu du dossier «sdcard_fr» pour mettre sur votre MicroSD.r le contenu du dossier «sdcard_fr» pour mettre sur votre MicroSD.)
• Capteur BioData pour ESP32  + (Un fil noir entre '''a2''' et la ligne de masse. Un fil rouge entre '''a5''' et la ligne '''+5V.''')
• Capteur BioData pour ESP32  + (Avant tout, veuillez noter que les connexi … Avant tout, veuillez noter que les connexions de la plaque d'essai sont identifiées par des chiffres et des lettres. Les colonnes sur le coté sont également identifiées '''+''' et '''-''' Positionnez ensuite le composant 555 sur la plaque de test en respectant la position du 555 sur la plaque d'essais. Attention au sens du 555, la petite marque ronde sur le composant doit être vers le haut.
  e composant doit être vers le haut. <br/>)
• How to Use Spotify as an Alarm on iPhone, Android, and Smart Speakers  + (Unfortunately, the default Clock app on iP … Unfortunately, the default Clock app on iPhones does not integration with Spotify. However, you can use third-party alarm apps such as Music Alarm Clock for Spotify+ or Kello Alarm Clock to set Spotify songs as your alarm. Here's how: '''Step 1.''' Install and launch the Music Alarm Clock for Spotify+ app or Kello Alarm Clock app on your iPhone. '''Step 2.''' Sign in with your Spotify account on those alarm app and open the app settings. '''Step 3.''' Create a new alarm by tapping the Add button and setting a specific alarm time. '''Step 4.''' Select the alarm sound and choose Spotify as the source. Browse and add your preferred Spotify songs or playlists as the alarm sound. '''Step 5.''' Save the settings, and your alarm will wake you with Spotify songs.ur alarm will wake you with Spotify songs.)
• Glowing LED Butterfly  + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
• SolarOSE - Guide 1: Support structure of the mirror field  + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
• SolarOSE - Guide 1: Support structure of the mirror field  + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
• Impression 3D  + (Voilà une présentation des différentes ét … Voilà une présentation des différentes étapes pour vous laissez libre court à votre imagination : -Rendez-vous sur le site : [https://www.tinkercad.com/dashboard https://www.tinkercad.com] -Créez vous un compte Autodesk -Cliquez ensuite sur le bouton "Créer une conception" Ce logiciel étant simplifié il vous permettra de pouvoir créer vos idées les plus folles.
  ir créer vos idées les plus folles. <br/>)
• Jerry DIT : ordinateur fabriqué avec des composants de réemploi  + (Vous aurez besoin : Papier + Ciseaux + Sco … Vous aurez besoin : Papier + Ciseaux + Scotch + Stylo Définir l'emplacement de chaque composant. Repérer la taille du plus grand composant et marquer la ligne de découpe du couvercle. Rappelez vous que '''2 marques''' valent mieux qu'une ;)
  Les parois des jerrycans sont souvent arrondies et laissent moins de place pour les composants à l'intérieur. Pensez que les cables occupent également de l'espace.
  'intérieur. Pensez que les cables occupent également de l'espace.</div> </div>)
• Jerry DIT : ordinateur fabriqué avec des composants de réemploi  + (Vous aurez besoin : Feuille de papier + cr … Vous aurez besoin : Feuille de papier + crayon ou feutre Créer un gabari pour chaque composants. Marquer les dimensions des composants sur la feuille en faisant des points à chaque extrémités. Placer ensuite les gabaris au bidon avec du scotch pour repérer les emplacements des trous à percer.pérer les emplacements des trous à percer.)
• Boite Appareil Photo en bois  + (A l'aide d'un peu de papier de verre, poncez doucement avec des mouvements circulaires chaque face de chaque partie. Évitez les bords pour ne pas noircir davantage votre bois puis nettoyez en soufflant.)
• Boite Appareil Photo en bois  + (A l'aide d'un peu de papier de verre, poncez doucement avec des mouvements circulaires chaque face de chaque partie. Évitez les bords pour ne pas noircir davantage votre bois puis nettoyez en soufflant.)
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Fabriquer une télécommande pour reflex/fr  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Light sensitive e-textile bag  + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
• Light sensitive e-textile bag  + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
• ESP32 with WebSerial: A Comprehensive Guide  + (WebSerial is a web standard that allows we … WebSerial is a web standard that allows websites to communicate with serial devices. It bridges the web and the physical world, enabling web applications to interact with hardware devices. This opens up a world of possibilities for IoT projects, allowing real-time interaction between web applications and physical devices.een web applications and physical devices.)
• Empty room activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
• Brightness control activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• How to Add Subtitles to YouTube Video  + (With [https://www.joyoshare.com/video-join … With [https://www.joyoshare.com/video-joiner/ Joyoshare Video Joiner] downloaded and installed on your desktop, double-click to launch it. At the bottom left, click the "Open File" to browse your local file and select the target YouTube video. You can also drag your video to its interface quickly and simply.video to its interface quickly and simply.)
• How to Save Spotify Music Tracks without a Premium  + (You can convert Spotify songs using either the Web player mode or the App mode.)
• SunZilla - Guide 5: Assembling solar panels frames  + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
• Water Quality Monitoring System Based on IOT  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node Red Controlled Web LED on ESP32 with Raspberry Pi 4  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
• Getting Started with TivaWare Launchpad - Basics  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node-Red Telegram Bot with Temperature Logger Part-2  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• M5Stick C Captive Portal  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node Red Controlled Neo Pixel on Raspberry Pi 4  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• AWS IoT Core IoT Platform Series - 6  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Line Follower Robot - King of Maze  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Ethernet-Enhanced LoRa Gateway Minimizing Delay  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Node Red with Raspberry Pi  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Getting Started with ESP-NOW  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Minetest and 3D scanning  + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
• Minetest and 3D scanning  + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
• ESP32 DHT22 IFTTT  + (You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny: *Go to https://thonny.org/ *Download *Install and then open)
• Pet that lights up upon interaction  + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
• Energy saving house with ESP32  + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
• Pet that lights up upon interaction  + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
• Energy saving house with ESP32  + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
• Simple Train Blocking System  + (You'll need to cut the rails or isolate th … You'll need to cut the rails or isolate them to make sure each block is independent. The last track is the security track and is isolated from the rest. The sticker on the plaque is right on the security track. What you see before is the main track (stop zone) and what you see after is the stop zone of the next block. after is the stop zone of the next block.)
• Malinette  + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
• Malinette  + (http://files.wikifab.org/f/fb/Malinette_boite-malinette-laser.svg)
• Picehnette de fou  + (Découpez la mousse en forme de boule)
• Réveil mp3 avec arduino  + (imprimante 3d ultimaker 2 Matière utilisée : PLA Réglages : voir fichier config imp3D.png Modèle : https://www.tinkercad.com/things/0svbwI2n4Ez-copy-of-megaphone/editv2)
• Anèmomètre  + (utiliser les fichiers STL https://gitlab.com/norbertwalter67/Windsensor_WiFi_1000/-/tree/master/CAD-Files/3D-Parts/STL?ref_type=heads)
• Canon confettis  + (visualisation du montage)
• Canon confettis  + (visualisation du montage)
• Best Amazon Music Converter in 2021 Is Here  + (“Our Audio Capture also enables users to r … “Our Audio Capture also enables users to rip Amazon Music to common audio tracks. But it's a little complicated to operate as it works on any sound playing on the computer. Therefore, there are more and more customers who feedback that they need a customized Amazon Music Converter,” Charles David said, the product manager of AudFree Software. “Under this circumstance, with the hardworking of our professional engineers, AudFree Amazon Music Converter is created and developed successfully, which can automatically detect and split songs, and realize batch addition and conversion,” added he. batch addition and conversion,” added he.)

• 3D scanning with Qlone  + (First, you will need to download the Qlone mat. Download it [https://drive.google.com/file/d/0B6z-PurmOnXWME1DRzAwR2N5OTZHcUNjcTJCMmRJcC1LX1o0/view?usp=sharing here].)
• 3D scanning with Qlone  + (First, you will need to download the Qlone mat. Download it [https://drive.google.com/file/d/0B6z-PurmOnXWME1DRzAwR2N5OTZHcUNjcTJCMmRJcC1LX1o0/view?usp=sharing here].)

• Montaje 3DSteel V2 - Tutorial 4 - Puesta a Punto  + ( # Encendemos la impresora. # Comprobamos que no muestre ningún mensaje de error y que la información tenga sentido. )
• Montaje 3DSteel - Tutorial 4 - Puesta a Punto  + ( #Encendemos la impresora. #Comprobamos que no muestre ningún mensaje de error y que la información tenga sentido. )
• Laboîte - suivi de la consommation électrique à la maison  + ( #La première étape consiste à récupérer l … #La première étape consiste à récupérer les données de consommation électrique depuis [https://translate.google.com/translate?hl=&sl=en&tl=fr&u=https%3A%2F%2Fguide.openenergymonitor.org%2Fapplications%2Fhome-energy%2F emoncms]. Il existe de nombreuses solutions alternatives à [https://translate.google.com/translate?hl=&sl=en&tl=fr&u=https%3A%2F%2Fguide.openenergymonitor.org%2Fapplications%2Fhome-energy%2F emoncms] mais cette solution présente les avantages suivants : #*Les données sont stockées chez vous #*L'écosystème logiciel et matériel est libre et basé sur des élément réparables et compatibles avec [[laboîte]]! #*La précision des mesures est excellente (89% en utilisant une pince ampèremétrique et 99% en utilisant un capteur d'impulsions) #Connectez-vous [https://emoncms.org/user/view à votre compte emoncms] et copiez votre clé d'API de lecture (''Read API Key'') #Ensuite sur la pages Flux (''Feeds''), copiez les identifiants de vos flux de consommation instantanée (en W) et énergie quotidienne (en kWhd) de consommation instantanée (en W) et énergie quotidienne (en kWhd) )
• Commande et instrumentation de trottinette électrique 500W avec Arduino méga  + (<nowiki>'''2. Bibliographie :'''< … '''2. Bibliographie :'''
  
  Lien download :
  
  '''sketch_escooter_feed_back_reel_V1.ino''' 
  
  https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing
  
  '''escooter_ampli_SIMULINK.mdl'''
  
  https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing
  
  '''escooter feed back ISIS.DSN'''
  
  https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing
  
  En anglais
  
  https://forum.arduino.cc/index.php?topic=477397.0
  
  article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »
  
  En attente
  
  '''3. Programme en boucle ouverte''' 
  
  Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.
  
  BP1 pour incrémenter manuellement le rapport cyclique, BP2 le  décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein. 
  
  La vitesse du moteur est pratiquement proportionnelle au rapport cyclique
  
  https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg
  
  Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield
  
  Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants. 
  
  http://www.robotpower.com/products/MegaMotoPlus_info.html
  
  http://www.robotshop.com/en/dc-motor-driver-2-15a.html
  
  https://www.pololu.com/file/0J51/vnh3sp30.pdf
  
  https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg
  
  mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant. 
  
  Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.
  
  Mais quel doit être la valeur du courant de limitation ?
  
  Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.
  
  Dans notre cas, le courant de limitation devra etre de 
  
  Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A
  
  De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.
  
  Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.
  
  Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de  L/R= 1.5ms.
  
  Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.
  
  l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.
  
  '''Algo boucle ouverte'''
  
  Routine d'interruption toutes les 0.1S
  
  Lire tension et courant
  
  Boucle loop (scrutation des boutons poussoirs) 
  
  Si BP1=1 alors incrementer PWM
  
  Si BP2=1 alors décrementer PWM
  
  Si BP3=1 alors PWM=0
  
  Affichage des variables tous les 0.2s
  
  '''code'''
  
  {{
  
  // include the library code:
  
  #include
  
  #include
  
  #include
  
  #define SERIAL_PORT_LOG_ENABLE 1
  
  #define Led     13       // 13 pour la led jaune sur la carte
  
  #define BP1     30       // 30 BP1
  
  #define BP2     31       // 31 BP2           
  
  #define BP3     32       // 32 BP3
  
  #define LEDV    33       // 33 led
  
  #define LEDJ    34       // 34 led
  
  #define LEDR    35       // 35 led
  
  #define relay   36       // 36 relay
  
  #define PWM10    10      //11   timer2    
  
  LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26
  
  // Configuration des variables
  
  unsigned   int UmoteurF = 0;  // variable to store the value coming from the sensor
  
  unsigned   int Umoteur = 0;
  
  unsigned   int Umoteur2 = 0;
  
  unsigned   int Umoteur3 = 0;
  
  unsigned   int Umoteur4 = 0;
  
  unsigned   int ImoteurF = 0;  
  
  unsigned   int Imoteur = 0;
  
  unsigned   int Imoteur2 = 0;
  
  unsigned   int Imoteur3 = 0;
  
  unsigned   int Imoteur4 = 0;
  
  byte Rcy=0 ;    //rapport cyclique  8bit
  
  unsigned    int temps;
  
  // the setup function runs once when you press reset or power the board
  
  void setup() {
  
  pinMode(Led, OUTPUT);   //led carte arduino
  
  pinMode(LEDV, OUTPUT);
  
  pinMode(LEDR, OUTPUT);
  
  pinMode(LEDJ, OUTPUT);
  
  pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2
  
  //  digitalWrite(LEDV,LOW);
  
  Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000
  
  Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt
  
  lcd.begin(20, 4);  
  
  Serial1.begin(9600); 
  
  TCCR2B = (TCCR2B & 0b11111000)r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT);   //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2<br /><br />//  digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000<br /><br />Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4);  <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
• Commande et instrumentation de trottinette électrique 500W avec Arduino méga  + (<nowiki>'''2. Bibliographie :'''< … '''2. Bibliographie :'''
  
  Lien download :
  
  '''sketch_escooter_feed_back_reel_V1.ino''' 
  
  https://drive.google.com/file/d/0B_fB3GAsM02FSlRTWHdyRkhuUW8/view?usp=sharing
  
  '''escooter_ampli_SIMULINK.mdl'''
  
  https://drive.google.com/file/d/0B_fB3GAsM02FOW9OdmlhdDhJZGc/view?usp=sharing
  
  '''escooter feed back ISIS.DSN'''
  
  https://drive.google.com/file/d/0B_fB3GAsM02FOXdRWFN5OWRMQkE/view?usp=sharing
  
  En anglais
  
  https://forum.arduino.cc/index.php?topic=477397.0
  
  article : « Etude de trottinettes électriques 100W et 500W (Arduino), Revue 3EI 2017 »
  
  En attente
  
  '''3. Programme en boucle ouverte''' 
  
  Pour tester la programmation, nous simulons le programme dans ISIS, comme on peut le voir sur la figure suivante. De plus, nous avons un afficheur LCD pour afficher des données (rapport cyclique correspondant à la PWM à 32Khz, le courant moteur, la tension moteur, l'action sur les boutons poussoirs. En effet, 4 boutons poussoirs sont utilisés.
  
  BP1 pour incrémenter manuellement le rapport cyclique, BP2 le  décrémenter. BP3 mettre le rapport cyclique à 0, correspondant au contact frein. 
  
  La vitesse du moteur est pratiquement proportionnelle au rapport cyclique
  
  https://i58.servimg.com/u/f58/17/56/35/17/a211.jpg
  
  Nous avons réalisé notre propre amplificateur de courant qui s'appelle un hacheur abaisseur mais il est possible d'acheter un shield
  
  Il existe de nombreuses cartes pour Arduino pour commander des moteurs DC surtout de faibles puissances et aussi de grandes puissances comme on peut l'observer sur les liens suivants. 
  
  http://www.robotpower.com/products/MegaMotoPlus_info.html
  
  http://www.robotshop.com/en/dc-motor-driver-2-15a.html
  
  https://www.pololu.com/file/0J51/vnh3sp30.pdf
  
  https://i58.servimg.com/u/f58/17/56/35/17/a310.jpg
  
  mais, tous ces hacheurs shields mesurent le courant en interne mais il n'y a pas de limitation de courant. 
  
  Pour avoir une limitation de courant il faut une boucle de courant analogique en utilisant des AOP ou CI spécialisée ou une boucle de courant numérique rapide.
  
  Mais quel doit être la valeur du courant de limitation ?
  
  Le choix de la valeur du courant est normalement pour le Service de fonctionnement 1 heure pour pouvoir effectuée des montées relativement longue sans atteindre la température critique du moteur.
  
  Dans notre cas, le courant de limitation devra etre de 
  
  Imoteur limitation=Puissance/Ubatterie=500W/24 V=20A
  
  De plus, le transistor de puissance du hacheur ne peut supporter que 50A dans notre cas.
  
  Mais en boucle ouverte, il n'a pas de régulation de courant, pour ne pas avoir de dépassement du courant maximum, une rampe du rapport cyclique sera utilisé.
  
  Une routine d'interruption de 0.1 seconde sera utilisé pour faire la mesure de la tension est du courant (échantillon de mesure, sample ). Ce temps de sampler est arbitraire, mais ne permet pas d'être plus rapide que le temps de montée du courant car la constante de temps électrique du moteur étant de  L/R= 1.5ms.
  
  Le fonctionnement en boucle ouverte avec une rampe de 25.5s (8bit et routine d'interruption de 0.1s) permet de bien comprendre la problématique du fonctionnement d'une commande à moteur DC.
  
  l'affichage se fera seulement tous les 0.2s pour avoir une stabilité des chiffres à l’écran. De plus, un filtrage numérique, se fera sur le courant et la tension sur 4 valeurs donc sur 0.4s.
  
  '''Algo boucle ouverte'''
  
  Routine d'interruption toutes les 0.1S
  
  Lire tension et courant
  
  Boucle loop (scrutation des boutons poussoirs) 
  
  Si BP1=1 alors incrementer PWM
  
  Si BP2=1 alors décrementer PWM
  
  Si BP3=1 alors PWM=0
  
  Affichage des variables tous les 0.2s
  
  '''code'''
  
  {{
  
  // include the library code:
  
  #include
  
  #include
  
  #include
  
  #define SERIAL_PORT_LOG_ENABLE 1
  
  #define Led     13       // 13 pour la led jaune sur la carte
  
  #define BP1     30       // 30 BP1
  
  #define BP2     31       // 31 BP2           
  
  #define BP3     32       // 32 BP3
  
  #define LEDV    33       // 33 led
  
  #define LEDJ    34       // 34 led
  
  #define LEDR    35       // 35 led
  
  #define relay   36       // 36 relay
  
  #define PWM10    10      //11   timer2    
  
  LiquidCrystal lcd(27, 28, 25, 24, 23, 22); // RS=12, Enable=11, D4=5, D5=4, D6= 3, D7=2, BPpoussoir=26
  
  // Configuration des variables
  
  unsigned   int UmoteurF = 0;  // variable to store the value coming from the sensor
  
  unsigned   int Umoteur = 0;
  
  unsigned   int Umoteur2 = 0;
  
  unsigned   int Umoteur3 = 0;
  
  unsigned   int Umoteur4 = 0;
  
  unsigned   int ImoteurF = 0;  
  
  unsigned   int Imoteur = 0;
  
  unsigned   int Imoteur2 = 0;
  
  unsigned   int Imoteur3 = 0;
  
  unsigned   int Imoteur4 = 0;
  
  byte Rcy=0 ;    //rapport cyclique  8bit
  
  unsigned    int temps;
  
  // the setup function runs once when you press reset or power the board
  
  void setup() {
  
  pinMode(Led, OUTPUT);   //led carte arduino
  
  pinMode(LEDV, OUTPUT);
  
  pinMode(LEDR, OUTPUT);
  
  pinMode(LEDJ, OUTPUT);
  
  pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2
  
  //  digitalWrite(LEDV,LOW);
  
  Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000
  
  Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt
  
  lcd.begin(20, 4);  
  
  Serial1.begin(9600); 
  
  TCCR2B = (TCCR2B & 0b11111000)r power the board<br /><br />void setup() {<br /><br />pinMode(Led, OUTPUT);   //led carte arduino<br /><br />pinMode(LEDV, OUTPUT);<br /><br />pinMode(LEDR, OUTPUT);<br /><br />pinMode(LEDJ, OUTPUT);<br /><br />pinMode (PWM10,OUTPUT);     // broche (10) en sortie  timer2<br /><br />//  digitalWrite(LEDV,LOW);<br /><br />Timer1.initialize(100000);         // initialize timer1, and set a 0,1 second period =>  100 000<br /><br />Timer1.attachInterrupt(callback);  // attaches callback() as a timer overflow interrupt<br /><br />lcd.begin(20, 4);  <br /><br />Serial1.begin(9600); <br /><br />TCCR2B = (TCCR2B & 0b11111000)</nowiki>)
• Thermomètre infrarouge microbit  + (Rendez vous sur ce lien : https://makecod … Rendez vous sur ce lien : https://makecode.microbit.org/_Up33c2V57WXt *assurez-vous que votre microbit est connecté à votre ordinateur par un câble micro-USB. *vous devriez constater que le microbit est utilisé par votre ordinateur comme une clé USB *cliquez sur le bouton "Download" de MakeCode, un fichier .hex sera téléchargé. Glissez et déposez le fichier .hex sur le lecteur (ou copiez et collez le). *Pendant la transmission, le voyant orange au dos de la carte micro:bit se met à clignoter. Une fois quele clignottement s'arrête, le transfert est terminé. Voilà, maintenant nous pouvons voir si le microbite fonctionne comme nous l'espérons.
  e fonctionne comme nous l'espérons. <br/>)
• Cheap and Cute Digital PhotoFrame Without SD Card on ESP8266and1-8inch TFT  + (<nowiki>1.8 TFT Panel ST7735 https:/ … 1.8 TFT Panel ST7735 https://www.aliexpress.com/item/32913848470.html
  
  1.8 TFT Panel ST7735 https://www.banggood.com/1_441_82_02_22_42_8-Inch-TFT-LCD-Display-Module-Colorful-Screen-Module-SPI-Interface-p-1494883.html
  
  ESP8266 WEMOS D1 https://www.aliexpress.com/item/33036965281.html
  
  3D Printed Case https://www.thingiverse.com/thing:4097143
  
  Some Wires & Soldering Iron.m/thing:4097143<br /><br />Some Wires & Soldering Iron.</nowiki>)
• Virtual Fence - Anti Theft Device  + (<nowiki>A Fence is a physical bounda … A Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located.
  
  This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''
  
  
  The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.
  
  But before we get started -e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
• 3D CAM sous Fusion 360  + (<nowiki>Avant de commencer la progra … Avant de commencer la programmation du CAM, considérez votre pièce et la meilleure approche pour l'usiner. Ces décisions dépendent de la forme du modèle, des matériaux, et des contraintes de la machine CNC que vous utilisez. Dans cette étape, vous apprendrez comment ces facteurs impactent votre stratégie d'usinage en ce qui concerne la fixation (workholding), le référencement (registration, c'est-à-dire s'assurer que la CNC sache où se trouve la pièce, et les paramètres du CAM.
  
  Chemins d'outil 3D
  
  Dans un toolpath 2D (poche, contour, tracé, ...), la tête de la fraise reste à une profondeur fixe (axe Z) durant une passe d'usinage, et ne bouge que dans les directions X et Y pendant qu'elle coupe. Ce type d'usinage est idéal pour des pièces prismatiques, pour lesquelles toutes les faces usinées sont perpendiculaires à l'axe de la broche de la machine.
  
  Lors de la programmation de pièces non prismatiques, telles que des moules ou des formes organiques, les opérations 2D sont insuffisantes. Vous devez utiliser des opérations de CAM 3D, dans lesquelles la fraise se déplace de manière dynamique selon X, Y et Z.
  
  Serrage
  
  Le serrage (workholding) est la stratégie pour maintenir votre pièce de manière rigide pendant le processus d'usinage. Lors de la programmation avec des parcours d'outil 3D, la mise en oeuvre est une considération initiale importante. Cela est particulièrement vrai pour les pièces qui nécessitent un usinage des deux côtés, lorsque la pièce sera basculée entre les ''setups''. (programmes d'usinage)
  
  Pour la programmation de pièces prismatiques,où les CAM 2D et 2.5D requièrent uniquement un modèle de CAO de la pièce que vous souhaitez usiner, aucune fonctionnalité supplémentaire n'est présente pour la fixation ou le référencement . En effet, la pièce prend la forme d'un prisme rectangulaire, qui peut être facilement maintenu dans un étau ou fixé au martyr.
  
  Mais que faites-vous lorsque votre forme est plus organique ou irrégulière, et doit également être retournée à la machine des deux côtés? Dans ce cas, vous devez créer un matériau supplémentaire qui maintiendra votre pièce dans un étau, contre le martyr ou à plat contre le bas de la machine. Il est très difficile de programmer le CAM sans avoir ces fonctionnalités intégrées dans votre modèle.
  
  En d’autres termes, l’usinage 3D avec retournement nécessite que vous modélisiez la matière que vous souhaitez laisser ainsi que des onglets pour éviter que votre pièce ne se détache dans la machine. Ces onglets seront coupés et poncés après l'usinage, généralement avec une scie à ruban et une ponceuse à disque.
  
  Pour votre cuillère de service, vous aurez deux onglets - un à chaque extrémité - et un prisme rectangulaire qui tiendra la cuillère à plat après le retournement. Lors de la modélisation, il est préférable de créer ces suppléments en tant que corps (bodies) distincts de la pièce à usiner.
  
  Référencement
  
  Étant donné que la cuillère sera usinée des deux côtés (usinage par retournement), vous devez vous assurer que la machine à commande numérique peut localiser la pièce avec précision après son déplacement. Ceci s'appelle l'enregistrement.
  
  Si vous avez déjà utilisé Haas, vous savez utiliser une sonde pour localiser votre pièce. Cependant, comme beaucoup de routeurs de table, le DMS n’a pas de sonde. Lorsque vous utilisez le DMS pour localiser l’origine de votre système de coordonnées de travail (Work Home), vous insérez un outil dans la broche et vous le positionnez au bon endroit. Il est courant de coincer un morceau de papier entre le support et l’outil pour s’assurer que Z est correct. Dans la classe des machines DMS, vous apprendrez à saisir les codes pour configurer votre WCS de cette manière. Comme vous pouvez l’imaginer, ce système n’est pas précis, car vous ne faites que "regarder les yeux" de cet endroit.
  
  Cela implique de devoir considérer une manière d'aligner les deux côtés de la pièces précisément si elle doit s'usiner des deux côtés. Il y a plusieurs méthodes possibles, chacune avec ses avantages et ses inconvénients qui dépendent de la spécificité de la pièce à usiner. Parmi les méthodes les plus courantes: - Attacher des butées sur le martyr ou le lit de la fraiseuse, où ira se caler la pièce usinée. - Usiner un contour dans le martyr, pour ensuite placer la pièce à l'intérieur en serrage - forer des trous pouvant accueillir des "pins" en bois, dans la pièce à usiner et dans le martyr, pour les solidariser (le plus précis)
  
  La dernière méthode est celle que nous utiliserons pour la cuillère. Lors de l'usinage de la face avant, vous percerez également trois trous à travers le stock et partiellement à travers le martyr. Lors du retournement de la pièce, vous insérerez des tourillons dans ces trous afin d'aligner l'autre face parfaitement avec la première.
  
  Paramétrage du CAM Les spécificités du projet (usinage de bois sur une fraiseuse multi-outils) vont également déterminer certains choix lors de la programmation des chemins d'outil. En l'occurrence, l'usinage du bois ou du platique n'est pas un usinage rapide. Cela autorise l'utilisation de chemins d'outils adaptatifs pour le "dégrossage", mais vous ne pouvez pas utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise. utiliser toute la longueur de la fraise. Lors de l'usinage de bois ou de plastique, suivez la règle du chevauchement et de la profondeur de passe : le chevauchement et la profondeur de passe ne doivent jamais excéder 50% du diamètre de la fraise.</nowiki>)
• How to Set Tidal Sleep Timer  + (<nowiki>If you are using an Android … If you are using an Android phone, you need to install a professional Sleep Timer app from the Google Play store on your Android device and then create a sleep timer according to your needs. Now, look at the steps below.
  
  '''Step 1.''' Download ''''Sleep Timer (Turn music off)'''' on your Android from Google Play.
  
  '''Step 2.''' Launch the app and tap on the three vertical dots in the top right corner of the home screen.
  
  '''Step 3.''' On the '''Setting''' menu, click ''''Player to launch on start'''' and select ''''Tidal'''' from the app list.
  
  '''Step 4.''' Go back to the '''Settings''' menu and then choose ''''On sleep'''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.</nowiki>)
• Qubitro Device Data - IoT Platform Series  + (<nowiki>To get started with Qubitro, … To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account.
  
  
  Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account. shall automatically be logged in to our account.</nowiki>)
• Water probe 9-11 activities  + (<nowiki>To have a functioning water … To have a functioning water probe, you ll need to upload a specific program onto the arduino uno board.
  
  Here is the sketch you need to upload:
  
  /*
  
  Water Conductivity Monitor
  
  Sketch for an Arduino gadget that measures the electrical
  
  conductivity of water.
  
  This example code is based on example code that is in the public domain.
  
  */
  
  const float ArduinoVoltage = 5.00; // CHANGE THIS FOR 3.3v Arduinos
  
  const float ArduinoResolution = ArduinoVoltage / 1024;
  
  const float resistorValue = 10000.0;
  
  int threshold = 3;
  
  int inputPin = A0;
  
  int ouputPin = A5;
  
  void setup()
  
  {
  
  Serial.begin(9600);
  
  pinMode(ouputPin, OUTPUT);
  
  pinMode(inputPin, INPUT);
  
  }
  
  void loop()
  
  {
  
  int analogValue=0;
  
  int oldAnalogValue=1000;
  
  float returnVoltage=0.0;
  
  float resistance=0.0;
  
  double Siemens;
  
  float TDS=0.0;
  
  while(((oldAnalogValue-analogValue)>threshold)><br />int oldAnalogValue=1000;<br /><br />float returnVoltage=0.0;<br /><br />float resistance=0.0;<br /><br />double Siemens;<br /><br />float TDS=0.0;<br /><br />while(((oldAnalogValue-analogValue)>threshold)</nowiki>)
• Automated Gardening Plant with arduino Uno under the DEEDU project  + (<nowiki>You will need<br />< … You will need
  
  electronic control and command part (listed below)
  
  water tank
  
  a plant in a pot
  
  a box for electronic (https://www.thingiverse.com/thing:4106140)
  
  3d printed light sensor support (https://www.thingiverse.com/thing:3986667)
  
  3d printed sprinkler (https://www.thingiverse.com/thing:3986672)
  
  For the Command & Control part the material used are the following:
  
  - 1 Arduino UNO link
  
  - 1 moisture sensor link
  
  - 1 CO2 Gas sensor Mq7 link
  
  - 1 Lcd screen 2x16 (+i2c)) link
  
  - 1 LDR light sensor (photoresistor) link
  
  - 2 push buttons link
  
  - 1 Temp + humidity sensor DHT11 link
  
  - 1 5V water pump link
  
  - 1 5v relay link
  
  - 3 1k resistor link
  
  - 1 Breadbord or prototyping PCB link
  
  -2 5v power supply linklink<br /><br />- 1 5V water pump link<br /><br />- 1 5v relay link<br /><br />- 3 1k resistor link<br /><br />- 1 Breadbord or prototyping PCB link<br /><br />-2 5v power supply link</nowiki>)
• Animatronic Interactif : Le Live  + ('''... Jusqu'à ce que ça marche...''' Ou qu'on abandonne (à un moment, il faut))
• How to Share Spotify Song on Snapchat  + ('''''Q: Is there a way to share and at the … '''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• Drone aile volante  + ( *Commencez par couper les marges avec une … *Commencez par couper les marges avec une règle et un cutter, prenez garde à suivre correctement le tracé en pointillé. *Se munir du tube de colle, puis encollez la feuille du coin en haut à gauche (Répartissez de la colle sur toute la surface du verso ) , là positionner sur un carton plein d'au moins 76cm*50.6cm et de 3mm d'épaisseur. Les deux bords en traits pleins doivent être superposés aux bords du carton. *Encoller la seconde section, là positionner à côté de la première en veillant à ce que les repères coïncident. *Poursuivre ceci jusqu'à ce que tout le plan soit reconstitué, puis faire de même pour les quatre autres. Les deux derniers peuvent êtres découpés pour utiliser les chutes de cartons. *Laisser sécher quelques heures. *A l'aide d'un cutter et d'une règle découper les pièces une par une sur les très pleins, évider les parties à évider. Les courbes peuvent êtres découpé à la scie à champ tourné. *Pour terminer poncer les bords des pièces découpés. miner poncer les bords des pièces découpés. )
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• How to Allow or Block Apple Music Explicit Content  + ('''Step 1.''' Go to '''Settings''' on your … '''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
• How to Clear Tidal Cache on iOS and Android  + ('''Step 1.''' On the Home screen of your A … '''Step 1.''' On the Home screen of your Android phone, press and hold the '''Tidal app icon''' until a menu appears. '''Step 2.''' Tap the icon with i to enter the app’s settings. Or you can go to '''Settings''' > '''Apps''' > '''Tidal''' to set up, too. '''Step 3.''' On the detail page, tap '''Storage & cache''' and then '''Clear cache'''.''Storage & cache''' and then '''Clear cache'''.)
• How to Create Spotify Codes for Sharing with Others  + ('''Step 1.''' Open the Spotify app and tap … '''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
• Poelito - Poêle de masse semi-démontable  + (Le principe du Poelito est de construire u … Le principe du Poelito est de construire un poêle rocket dans un bidon. Le fond du bidon est tapissé de mélange isolant. Cela ne dispense pas de poser son poêle sur un support incombustible. La partie inférieure, où le feu se développe, est coulée en béton réfractaire autour d’un coffrage en tubes de carton. Ces tubes forment des réservations creuses : le circuit du feu et de fumées. La partie inférieure constitue la base du foyer. C’est une masse fixe. La moitié supérieure est constituée de tuyaux métalliques amovibles et remplie de sable que l’on peut laisser sur place ou transporter séparément. Le foyer est fermé soit par une plaque de fonte, soit par une plaque vitro céramique, recouvert par le couvercle du bidon en guise de finition. Le conduit d’évacuation est à l’extérieur du bidon. La connexion se fait par un T de raccordement avec tampon de ramonage. La traversée du plafond et la sortie de toit (ou tout ce qui est à l’extérieur de l’habitat) doit obligatoirement être isolée. On voit sur l'image le bas du conduit d’alimentation vertical avec vers le premier plan son cendrier, et vers l’arrière-plan le départ horizontal des flammes : ce premier ensemble constitue le brûleur. A l’arrière-plan on voit les 2 reprises des fumées, une de chaque côté du conduit de départ de flamme. Ces 2 reprises se rejoignent par en dessous via un collecteur, qui envoie les fumées vers l’arrière, en direction de l’évacuation des fumées). Cet ensemble constitue le collecteur. Raccordement au conduit d’évacuation par T avec tampon au conduit d’évacuation par T avec tampon)
• Wio WM1110: Quick Start Guide for Seamless Integration  + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• NEXT ENGINE 3D SCANNER :How to use it  + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' … * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA'''  5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
• Maquette de cartographie du Quartier Villejean Rennes  + ( * 1 Panneau contreplaqué okoumé Ép.5 mm 1m x 0,61m * 1 Panneau médium (mdf) naturel, Ép.3 mm 1m x 0,61m * 1 ordinateur avec logiciel Adobe Illustrator ou Inkscape. * Découpeuse laser * Colle pour le bois )
• Découpage Vinyle  + (<div class="icon-instructions caution-i …
  Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
  er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
• Découpage Vinyle  + (<div class="icon-instructions caution-i …
  Étape importante Enregistrer le fichier en *.hpgl (Fichier HP Graphics Language) Ensuite renommer votre fichier en *.plt
  er HP Graphics Language) Ensuite renommer votre fichier en *.plt</div> </div>)
• Laser cut Spirograph  + ( * Open a new document in tinkercad * Select view TOP * ''Switch to Orthographic view'' ''Always use Shift plus Right-click to move the workplane.'' ''Use the Mouse-wheel to zoom-in zoom-out.'' )
• Design your personal logo with Tinkercad  + ( * Open a new document in tinkercad * Sel … * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
• Librem 5 Case Creating Community  + ( * for advertisement and spreading the word on Purism's blog / news site and on social media * for resources, for example a 3d file of the outer shape of the phone or a basic case file )
• FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi … * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
• FoldaRap 2.5 : imprimante 3D facilement transportable  + ( * pied-avant-gauche: http://reprap.org/wi … * pied-avant-gauche: http://reprap.org/wiki/File:Foot-front-left.png * pied-avant-droite: http://reprap.org/wiki/File:Foot-front-rightt.png * pied-arrière-droite: http://reprap.org/wiki/File:Foot-front-left.png * pied-arrière-gauche: http://reprap.org/wiki/File:Foot-front-rightt.png * charnière-intérieur-gauche: http://reprap.org/wiki/File:FR2-5-hinge-inner-left.png * charnière-intérieur-droite: http://reprap.org/wiki/File:FR2-5-hinge-inner-right.png p.org/wiki/File:FR2-5-hinge-inner-right.png )
• Boîte à dons  + (Pour décorer cette boîte à dons afin qu'el … Pour décorer cette boîte à dons afin qu'elle soit plus attrayante, nous avons ajouté des gravures sur les côtés de la boîte (fichiers disponibles sur cette page). Libre à vous d'ajouter toutes sortes de gravures à partir de n'importe quelle image !
  *Ouvrir le fichier .svg avec le logiciel Xtool Creative Space et faire les arrangements nécessaires (ajouts de trous ou gravures) *Ici, le matériau utilisé est le "3mm Basswood Plywood A4" d'une épaisseur de 5mm. *Lancer la découpe : pour la découpe, la puissance est de 100%, la vitesse de 3mm/s et le nombre de passage est de 2 et pour la gravure, la puissance est de 70% et la vitesse de 60mm/s.la puissance est de 70% et la vitesse de 60mm/s.)
• Maker' pot  + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
• Maker' pot  + (- '''3.1 les composants''' * 1 Feather Hu … - '''3.1 les composants''' * 1 Feather Huzzah ESP8266 * 1 Trinket Pro 5V * 1 régulateur 12V - 5V * 1 pompe (brushless DC pump, 12V 9W) * 1 alimentation 12V 3000mA * 1 connecteur pour l'alimentation * 1 capteur de niveau d'eau (capacitif à créer en amont) * 2 transistors * 1 diode * 1 lampe (2 rubans de leds froides dans l'idéal) - '''3.2 le circuit''' Découper une plaque de prototypage de 75x90mm et suivre le schéma ci-joint pour réaliser les soudures. Il est conseillé: * de souder des pins males sur la feather huzzah et la trinket pro et des pins femelles à leur futur emplacement sur la PCB. * d'être en mesure de brancher et débrancher les câbles d'alimentation de la pompe, des leds et du capteur d'eau. Utiliser des pins males et femelles ou des connecteurs comme nous l'avons fait. - '''3.3 Création des comptes''' * Adafruit https://io.adafruit.com/ Créer un compte Adafruit IO et mettre de côté les informations : ''AIO Key'' et ''username''. Créer les feeds "alert0", "alert1", "alert2", "leds", "ledsetter", "pump" & "waterlevel". * IFTTT https://ifttt.com/ Créer un compte IFTTT. Chercher le service "Adafruit" et connecter le avec votre compte adafruit IO. Faire de même avec le service "Gmail" ou "mail". Créer les 4 applets suivants: # "IF '''any new data on alert1 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 1. # "IF '''any new data on alert0 feed''', THEN '''send an email to yourself'''" (Adafruit -> Gmail). Cet applet permet de recevoir un mail notifiant que le niveau d'eau du makers' pot est à 0 et qu'il faut remplir le réservoir d'eau. # "IF '''every day at 06:00AM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet allume les leds à 6h tous les matins, ledsetter = 1. # "IF '''every day at 10:00PM''', THEN '''send send data to ledsetter feed'''" (Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.tter feed'''" <small>(Date & Time -> Adafruit). Cet applet éteint les leds à 22h tous les soirs, ledsetter = 0.</small>)
• Tab2Lux  + (Source : https://syskb.com/lecteur-audio- … Source : https://syskb.com/lecteur-audio-raspberry-pi-dac/#A4 Temps estimé : 30 minutes en comptant le téléchargement d’une image de 600 MB #Téléchargez la [http://www.runeaudio.com/download/ dernière version de RuneAudio]. Notez que si vous avez un vieux Raspberry Pi, ça le fait !
  #Insérez votre carte Micro SD sur votre PC.
  #Téléchargement d'Etcher : En effet, Etcher est extrêmement simple à utiliser. On le télécharge, l’installe et on le lance. L'avantage de ce logiciel, c'est qu'il peut utiliser une ISO zippé sans devoir la décompresser
  > On choisit l'ISO (1) puis la carte SD de destination (2) et enfin, on lance l'installation (3).
  #Une fois l’installation terminée insérez la carte SD dans le RPi.
  br/> #Une fois l’installation terminée insérez la carte SD dans le RPi. <br/>)
• Jeu puissance 4 fait en bois  + (Après avoir tout découpé, vérifier que les différentes parties s’emboîtent correctement. Modifier le .Gcode si nécessaire.)
• Épée pirate 3D  + (Mise en peinture (les choix des couleurs ont été laissés à ma fille) Les fichiers 3D si quelqu'un veut refaire cette épée (elle est gravée au nom de ma fille, mais c'est facilement changeable via un logiciel DAO (google sketchup par exemple en gratuit).)
• Épée pirate 3D  + (Mise en peinture (les choix des couleurs ont été laissés à ma fille) Les fichiers 3D si quelqu'un veut refaire cette épée (elle est gravée au nom de ma fille, mais c'est facilement changeable via un logiciel DAO (google sketchup par exemple en gratuit).)
• Fix Spotify Songs Disappeared  + (1. The original songs and playlists may be … 1. The original songs and playlists may be deleted by their artist or creator. This mostly happens to the songs or playlists that are grayed out after you've downloaded them to your device. It's probably because that the artist or the creator of these songs or playlists does not want these tracks on Spotify for some reason. See also: Fix [https://www.tuneskit.com/spotify-music-tips/fix-spotify-greyed-out-songs.html Spotify songs greyed out] 2. Something got wrong with your Internet connection when you check or download these downloaded songs in Spotify. While you are saving any track or playlist offline on Spotify, an Internet connection is required. So you should confirm the network runs well when you are downloading the songs or playlists from Spotify. If it is this reason that causes your problem, you should download the songs again with a good internet connection. 3. Your downloads of songs from Spotify exceed the 10,000 number limit. As Spotify only allows Premium users to download up to 10,000 tracks in total, you should check whether you have hit that limit or not. If so, Spotify will delete the previously downloaded songs automatically if it finds you adding some new tracks. Normally, you'll be noticed by Spotify with a warning message once you reached this limit. 4. You may be out of Spotify Premium. So you need to verify your premium membership.  You are required to log into your account online every 30 days even if you use Spotify Offline mode. Otherwise, the downloaded songs would disappear from your Spotify account. In other cases, the previously downloaded songs could become unavailable on Spotify if you changed the region of your VPN network. That's because some Spotify songs are not allowed in certain countries and regions. To get the music back again, you should change your VPN network settings.ck again, you should change your VPN network settings.)
• Logo d'entreprise  + (1.télechrage les image sur Google 2.Inkscape 3.vectorise 4.assemblage)
• Ludo science  + (<big>'''<u>les sites</u> … '''les sites :''' -microbite : [https://microbit.org/ Micro:bit Educational Foundation -les roue : https://www.3dcontentcentral.com/Download-Model.aspx?catalogid=171&id=94421 -la voiture : [https://www.3dcontentcentral.com/Download-Model.aspx?catalogid=171&id=94420 3D ContentCentral - Modèles CAO 3D, dessins 2D et catalogues fournisseurs gratuits] '''les outils :''' -( imprimante 3D pour faire les pièce 3D ) -scie à métaux, scie à bois, ciseaux à bois, visseuse, perceuse, limes, '''les matériaux :''' -planches de bois(1 cm d'hauteur, 80 cm de longueur, 45 cm de largeur), plusieurs planche, vises, tubes( environ , règle , velours. '''''-2 moteur stepping motor 12 V''''' -[https://stfelixlasalle-my.sharepoint.com/:u:/g/personal/clement_guillemard_stfelixlasalle_fr/EVj64fF4j_NHmlAPg8CaOswBfrrGPagfdhf1ctHuomqXmQ poulie/ :] https://stfelixlasalle-my.sharepoint.com/:u:/g/personal/clement_guillemard_stfelixlasalle_fr/EVj64fF4j_NHmlAPg8CaOswBfrrGPagfdhf1ctHuomqXmQ -objet qui peut être utiliser comme courroie - carte mère -programme phytonfelixlasalle_fr/EVj64fF4j_NHmlAPg8CaOswBfrrGPagfdhf1ctHuomqXmQ -objet qui peut être utiliser comme courroie - carte mère -programme phyton)
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Filet à ichtyoplancton - simple arceau  + (<div class="icon-instructions idea-icon …
  si vous avez pu récupérer un patron (carton au format de la maille découpée), tracer directement cette forme sur la maille.
  Utilisez un feutre indélébile pour tracer sur la maille.
  Pour chaque étape,regarder la photo correspondante sur la gauche
  Étape 0) Tracer le point A au milieu du petit coté, et A' au milieu de l'autre petit coté. Tracer le segment AA' Étape 1) Marquer le point C sur ce segment, pour que AC = 147,5 cm Étape 2) A l'aide d'un "compas" (un marqueur au bout d'une ficelle) tracer l'arc CB=78,5cm Puis avec la même technique, tracer l'arc AB=167cm A l'intersection des deux arcs: marquer le point B Faire de même de l'autre côté, pour marquer B' Étape 3) Avec la même technique, tracer l'arc BB', de 167cm de rayon (=AB=AB') Étape 4) Faire de même pour l'arc DD' avec un rayon AD=AD'=35cm Étape 5) Marquer ensuite une bordure de 3cm de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.)
• Filet à ichtyoplancton - simple arceau  + (<div class="icon-instructions idea-icon …
  si vous avez pu récupérer un patron (carton au format de la maille découpée), tracer directement cette forme sur la maille.
  Utilisez un feutre indélébile pour tracer sur la maille.
  Pour chaque étape,regarder la photo correspondante sur la gauche
  Étape 0) Tracer le point A au milieu du petit coté, et A' au milieu de l'autre petit coté. Tracer le segment AA' Étape 1) Marquer le point C sur ce segment, pour que AC = 147,5 cm Étape 2) A l'aide d'un "compas" (un marqueur au bout d'une ficelle) tracer l'arc CB=78,5cm Puis avec la même technique, tracer l'arc AB=167cm A l'intersection des deux arcs: marquer le point B Faire de même de l'autre côté, pour marquer B' Étape 3) Avec la même technique, tracer l'arc BB', de 167cm de rayon (=AB=AB') Étape 4) Faire de même pour l'arc DD' avec un rayon AD=AD'=35cm Étape 5) Marquer ensuite une bordure de 3cm de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.de large de chaque côté. Ces 2 bordures seront cousues ensuite l'une sur l'autre pour fermer le côte et former le filet à la bonne taille.)
• Geiger counter 12+  + (<u>https://world-nuclear.org/nuclear … https://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
• Thermostat control activity v12  + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• Costruzione del robot ABC  + (<div class="mw-translate-fuzzy"> Iniziamo prendendo la base aggiungendo il supporto con la batteria collegata ai 3 LED verdi. </div> <div class="mw-translate-fuzzy"> Prendere 4 viti M4 e inserirle nei 4 fori e fissare 1 dado su ciascuna vite. </div>)
• How to Play Amazon Music on Google Home  + (After downloading and installing of AudFree [https://www.audfree.com/amazon-music-converter/ Amazon Converter], double-tap to start it. Next, you will be navigated to the Amazon Music web player. Locate the "Sign In" option to access your Amazon account.)
• Guide on how to Permanently Add Subtitles to MP4  + (After downloading and installing Joyoshare [https://www.joyoshare.com/video-joiner/ Video Joiner], run it. Then you can add MP4 files to Joyoshare with 2 ways: Drag and drop MP4 video to the left screen; Select from the local folder.)
• FLAC Joiner to Join FLAC Files in Original Quality  + (After downloading and installing [https://www.joyoshare.com/video-joiner/ Joyoshare Audio Joiner], open it and click on "Open File" to import FLAC folder. Or, directly drag and drop all FLAC audio files to be joined to the software.)
• Manipulate the CubePro Trio  + (After downloading the program and installing it using it's serial number and activating it, we must launch the program.)
• How to Burn Spotify Playlist to CD  + (After getting your computer equipped with … After getting your computer equipped with AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Music Downloader], double-click to open it. AudFree establishs intergration with Spotify. So running AudFree Spotify software will start the Spotify app. Search tracks or playlists that you want to burn to CD from Spotify music library. Then, copy the link to paste onto the search box of AudFree and click "+" icon to add Spotify music to AudFree. Alternatively, directly drag and drop.ee. Alternatively, directly drag and drop.)
• How to Download and Convert Spotify Music to MP3  + (After launching '''Tunelf Spotibeat Music … After launching '''Tunelf Spotibeat Music Converter''', it will load the Spotify app automatically on your computer. Then browse the music library to find out the song or playlist you want to download. You can choose to drag them to Tunelf interface or copy the link of Spotify music to the search box on Tunelf interface.sic to the search box on Tunelf interface.)
• How to Play Spotify on Squeezebox  + (After opening this [https://www.tuneskit.c … After opening this [https://www.tuneskit.com/spotify-music-tips/download-spotify-playlist-to-mp3.html Spotify to MP3 downloader], Spotify will be automatically started. Then you can search and find the Spotify track or playlist you want to play on Squeezebox and drag them to the screen of this Spotify Music Converter directly.o the screen of this Spotify Music Converter directly.)
• Play Tidal Songs on Roku TV  + (After the download and installation of the … After the download and installation of the TuneCable program. Run it and choose a download mode from the main interface. The app mode needs the TIDAL app to run and can save up to Tidal Max (up to 24-bit/192kHz) music at 5x or 1x (for Mac) the speed, while the web player mode works via the built-in Tidal web player and can retain Tidal High (16-bit/44.1kHz) quality music at 10x fast speed. Pick the one you prefer, and sign in to your Tidal Free, HiFi, or HiFi Plus account.ur Tidal Free, HiFi, or HiFi Plus account.)
• Download Spotify Playlist to MP3 - How to  + (After the installation of AudFree [https:/ … After the installation of AudFree [https://www.audfree.com/spotify-music-converter-win/ Spotify Playlist Converter], double-click to open it. In the meanwhile, the Spotify app will automatically start. Then, copy your favorite playlists to AudFree. There are two ways. 1) Copy the link of Spotify playlist > paste it to the search box of AudFree > click "+" icon to upload; 2) Simply drag and drop Spotify playlist to AudFree's main interface.op Spotify playlist to AudFree's main interface.)
• Démarrage CNC MEKANIKA  + (Allumer la multiprise L'écran s'allume Appuyer ensuite sur le bouton ON/OFF situé à l’arrière du boitier électronique. L'ordinateur démarre et affiche le système. Démarrer Planet CNC)
• Amazon Music Autoplay - A Seamless Listening Experience  + (Amazon Music Autoplay is a feature designe … Amazon Music Autoplay is a feature designed to keep the music playing continuously, providing an uninterrupted listening experience. With autoplay enabled, Amazon Music will automatically queue up and play similar songs, albums, or playlists once your current track or playlist ends. This feature aims to keep the music going without requiring you to manually select the next song, making it perfect for parties, road trips, or background music during work or chores.or background music during work or chores.)
• Best Method to Upload Apple Music to Dropbox  + (Apple Music songs are protected. Fortunate … Apple Music songs are protected. Fortunately, with today's technology, you are just a few clicks away to get all protection-free music files by a tool such as TunesKit [https://www.tuneskit.com/audio-converter/ Apple Music Converter], which is a top-notch converting tool in the market. It supersedes other tools by integrating the fast and lossless converting technology plus multiple formats and device compatibility so as to promise the ultimate user experience. After the conversion, you can also [https://www.tuneskit.com/apple-music-tips/transfer-apple-music-to-google-drive.html play Apple Music on Google Drive] or other clouds easily.lay Apple Music on Google Drive</u>] or other clouds easily.)
• How to Play Spotify to Yoto Player without Premium  + (<nowiki>Once the Spotify music you w … Once the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music.
  
  
  '''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.
  
  '''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.
  
  '''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.
  
  '''Step 4.''' Select ''''Add Audio'''' from the options.
  
  '''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.
  
  '''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).
  
  '''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.
  
  '''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.
  
  
  ' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.<br /><br /><br/></nowiki>)
• Lossless FLAC Splitter to Split FLAC in Original Quality  + (Based on your system, select the proper ve … Based on your system, select the proper version of Joyoshare [https://www.joyoshare.com/video-cutter-win/ audio splitter] to download and install. Then, open the program and go to "Open" to access your local folder and choose the FLAC file to it. Or, you can drag and drop the FLAC audio file to the specified position to start.o file to the specified position to start.)
• ESP32 MQTT  + (<nowiki>Copy the full code into your … Copy the full code into your IDE. Feel free to change things like the text it prints, etc
  
  
  

   1 #include 
   2 #include 
   3 
   4 // WiFi
   5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
   6 const char *password = "xxxxx";  // Enter Wi-Fi password
   7 
   8 // MQTT Broker
   9 const char *mqtt_broker = "broker.emqx.io";
  10 const char *topic = "emqx/esp32";
  11 const char *mqtt_username = "emqx";
  12 const char *mqtt_password = "public";
  13 const int mqtt_port = 1883;
  14 
  15 WiFiClient espClient;
  16 PubSubClient client(espClient);
  17 
  18 void setup() {
  19     // Set software serial baud to 115200;
  20     Serial.begin(115200);
  21     // Connecting to a WiFi network
  22     WiFi.begin(ssid, password);
  23     while (WiFi.status() != WL_CONNECTED) {
  24         delay(500);
  25         Serial.println("Connecting to WiFi..");
  26     }
  27     Serial.println("Connected to the Wi-Fi network");
  28     //connecting to a mqtt broker
  29     client.setServer(mqtt_broker, mqtt_port);
  30     client.setCallback(callback);
  31     while (!client.connected()) {
  32         String client_id = "esp32-client-";
  33         client_id += String(WiFi.macAddress());
  34         Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
  35         if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
  36             Serial.println("Public EMQX MQTT broker connected");
  37         } else {
  38             Serial.print("failed with state ");
  39             Serial.print(client.state());
  40             delay(2000);
  41         }
  42     }
  43     // Publish and subscribe
  44     client.publish(topic, "Hi, I'm ESP32 ^^");
  45     client.subscribe(topic);
  46 }
  47 
  48 void callback(char *topic, byte *payload, unsigned int length) {
  49     Serial.print("Message arrived in topic: ");
  50     Serial.println(topic);
  51     Serial.print("Message:");
  52     for (int i = 0; i < length; i++) {
  53         Serial.print((char) payload[i]);
  54     }
  55     Serial.println();
  56     Serial.println("-----------------------");
  57 }
  58 
  59 void loop() {
  60     client.loop();
  61 }
  

  i">0</span><span class="p">;</span> <span class="n">i</span> <span class="o"><</span> <span class="n">length</span><span class="p">;</span> <span class="n">i</span><span class="o">++</span><span class="p">)</span> <span class="p">{</span><br /><span class="lineno">53 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">print</span><span class="p">((</span><span class="kt">char</span><span class="p">)</span> <span class="n">payload</span><span class="p">[</span><span class="n">i</span><span class="p">]);</span><br /><span class="lineno">54 </span> <span class="p">}</span><br /><span class="lineno">55 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">();</span><br /><span class="lineno">56 </span> <span class="n">Serial</span><span class="p">.</span><span class="n">println</span><span class="p">(</span><span class="s">"-----------------------"</span><span class="p">);</span><br /><span class="lineno">57 </span><span class="p">}</span><br /><span class="lineno">58 </span><br /><span class="lineno">59 </span><span class="kt">void</span> <span class="nf">loop</span><span class="p">()</span> <span class="p">{</span><br /><span class="lineno">60 </span> <span class="n">client</span><span class="p">.</span><span class="n">loop</span><span class="p">();</span><br /><span class="lineno">61 </span><span class="p">}</span><br /></pre></div></nowiki>)
• 2023 Guide to Download Spotify Songs without Premium  + (Before we explore the methods, let's addre … Before we explore the methods, let's address the question of whether it is possible to download Spotify songs without a premium subscription. By default, Spotify encrypts the songs you download from their app in a DRM-protected audio format. This encryption prevents the songs from being played on other apps or players. However, thanks to the internet, several third-party tools and services have emerged that allow you to download Spotify songs without a premium account.d Spotify songs without a premium account.)
• Build a Longboard from Scratch in Your Own Home  + (Before you start putting together your lon … Before you start putting together your longboard, you'll need to do some cutting and drilling. Begin by cutting your threaded rods into two pieces, each 8 inches long. Use a fret file to smooth out the rods, which are 5/16" x 12" inches in size. Next, apply grip tape to the board. Cut the grip tape to be about one centimeter wider than the board, then press it onto the board and trim off any excess. With your 6º wedge riser, mark where you'll drill to attach the INOX Allen bolts, which are 1/4" x 1.5" in size. Ensure the marks are centered on the ends of your board. Safety is crucial, so wear gloves and safety glasses during this process. Carefully drill four holes, making sure they are clean and precise. We used a 3D-printed part to help us drill the holes in the cap perfectly centered. If you'd like access to the design for this part, please let us know, and we'll share it with you. Finally, position the drill in the middle of your 1" cap and drill each hole carefully. The 1" cap should have a similar appearance to the one shown in the image. appearance to the one shown in the image.)
• Water probe 12+ activities  + (Begin by soldering the male pin header str … Begin by soldering the male pin header strip onto the PCB board. You need to cover at least 10 points of the PCB (see figure below). Next, solder the 1kohm resistor to the PCB. We soldered one end to n°6, the other end to n°9. This way, when the PCB will be mounted on the arduino uno board, one end of the resistor will connect to A0, the other one to GND. Next, cut two pieces of electric wire, each about 20 cm long. The length doesn’t really matter, however, longer wires will enable you to distance the arduino board further away from liquids. Solder one end of one wire to one end of the resistor. This will connect to A0 on the board. Solder the other end to n° on the PCB. The latter will then connect with A5 on the arduino uno board. Strip off the other ends of the electric wire you just soldered onto the PCB, and connect them to the top of the binding post. Now cut two short pieces of electric wire (about 10 cm long each), and strip off both ends of each wire. Connect one end of each to the bottom part of the binding post. Curl the other end of each wire. The curly ends are the one which will dive into the liquid.e the one which will dive into the liquid.)
• Atelier pour Arrosage automatique et autonome  + (Choix notés ce soir: * quel type de pompe … Choix notés ce soir: * quel type de pompe ? (s'assurer qu'elle peut aller jusqu'au bout du mur) * batterie rechargeables ou pas ? * arrosage sur ou sous terre * circuit électronique simple, ou nano, ou nodemcu (rester dans du "standard") * quel panneau solaire? Doit-il pouvoir alimenter le moteur directement, ou faut il passer par des batteries pour avoir assez de puissance? Il y a même des tutos sur des [https://www.electronicshub.org/solar-battery-charger-for-18650/ circuits de recharge utilisant un simple TP4056] connecté au panneau et à la batterie! Est-ce sérieux? (Autre composant apprécié : J5019) Ci-joint un panneau que j'ai, de 12V , 3,5W, 290mA.un panneau que j'ai, de 12V , 3,5W, 290mA.)
• How to Play Spotify through VLC Media Player  + (Click the software icon to launch this too … Click the software icon to launch this tool and Spotify app from your computer desktop. Now, there are two ways to import Spotify playlists to AudFree Software. You can drag and drop Spotify files from Spotify to this program. Or you can copy and paste its URL of Spotify music to AudFree's search box and then press the '+' button to confirm it.d then press the '+' button to confirm it.)
• ImagR - Préparation d'une photo pour la gravure laser  + (Cliquer sur Upload Votre photo doit être d'une qualité suffisante. Éviter les vignettes. Ici, j'ai pris la photo de mon chien ;))
• ImagR - Préparation d'une photo pour la gravure laser  + (Cliquer sur Upload Votre photo doit être d'une qualité suffisante. Éviter les vignettes. Ici, j'ai pris la photo de mon chien ;))
• Vidéoprojecteur pour smartphone  + (Commencez par peindre l'intérieur de votre … Commencez par peindre l'intérieur de votre boîte à chaussure et de son couvercle en noir. Cela assurera une image plus nette par la suite. Une fois la peinture sèche, placez la loupe sur l'un des ses (petits) côtés et tracez-en le contour à l'aide d'un crayon.tracez-en le contour à l'aide d'un crayon.)
• Vidéoprojecteur pour smartphone  + (Commencez par peindre l'intérieur de votre … Commencez par peindre l'intérieur de votre boîte à chaussure et de son couvercle en noir. Cela assurera une image plus nette par la suite. Une fois la peinture sèche, placez la loupe sur l'un des ses (petits) côtés et tracez-en le contour à l'aide d'un crayon.tracez-en le contour à l'aide d'un crayon.)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• Connected weather station  + (Connect the sensors as follows: '''Light … Connect the sensors as follows: '''Light sensor''' One end to 3V the other end to the 10kohm resistor which in turn is connected to GND. the same end of the LDR is also connected to pin D34 on the ESP32 '''CJMCU CCS811''' 3V →3V on the ESP32 board GND→ GND SDA→D21 pin on ESP32 SCL→D22 pin on ESP32 WAKE→GND '''DHT11''' GND→GND on ESP32 VCC→3V on ESP32 OUT→D34 on ESP32n ESP32 VCC→3V on ESP32 OUT→D34 on ESP32)
• Showerloop - Manuel n°2 : Les filtres  + (Il y a 3 disques de compression par filtre … Il y a 3 disques de compression par filtre. Deux aux deux extrémités pour compresser le sable et le charbon actif et un entre le sable et le charbon actif! Le disque de compression dans le fichier est imbriqué dans le vide de la plaque de support pour économiser du matériel!ue de support pour économiser du matériel!)
• Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
• Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
• Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
• Connected house publishes sensor data on-line  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “lightsensorvalue”.)
• Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
• Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
• Infinity Gauntlet Salad Tongs  + (Create the vector graphics for the Infinit … Create the vector graphics for the Infinity Gauntlet in Adobe Illustrator. Find a reference image online and use the Magnetic Lasso tool to trace around key elements of the image. We wanted the glove to have a layered and 3d look, so he traced out the base shape of the glove and used other gauntlet elements as vertical accents.her gauntlet elements as vertical accents.)
• Infinity Gauntlet Salad Tongs  + (Create the vector graphics for the Infinit … Create the vector graphics for the Infinity Gauntlet in Adobe Illustrator. Find a reference image online and use the Magnetic Lasso tool to trace around key elements of the image. We wanted the glove to have a layered and 3d look, so he traced out the base shape of the glove and used other gauntlet elements as vertical accents.her gauntlet elements as vertical accents.)
• Utilisation Ultimaker 2+  + (Cura est ce qu'on appelle un slicer ; c'es … Cura est ce qu'on appelle un slicer ; c'est un logiciel qui sert à "trancher" votre fichier 3D pour que l'imprimante puisse l'imprimer. * Allez sur ce site : https://ultimaker.com/en/products/cura-software * Cliquez sur download for free. * un questionnaire va s'ouvrir vous demandant à quoi va servir Cura, si vous ne voulez pas vous embêter à répondre cliquez sur I don't want to share any information * une fois le logiciel téléchargé, lancez l'instalation logiciel téléchargé, lancez l'instalation)
• Fibonacci Clock  + (Cut 4 plywood board for outside walls, 2 o … Cut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
• SolarOSE - Guide 4: Skeleton of the receiver  + (Cut the 30x30x2300 mm square tube. Drill the fixation holes of the tepee. Drill and tap at 5 mm diameter the fixation holes of the junction.)
• SunZilla - Guide 1: Preparing the aluminium profiles  + (Cut the aluminum profiles according to the technical drawings in the attached PDFs. Once you have them in hand, the first step is to file the ends of the profiles to deburr them, as shown in the picture.)
• Spinning Kinetic Sculpture RGB  + (Cut the first svg file on 2 sheets of 300c … Cut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
• SolarOSE - Guide 7: Assembling of the receiver  + (Cut the squared tube at a length of 2.2 m. Put the 10 hangers on the squared tube, with a spacing of 22 cm.)