Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• Entryway catch-all table  + (I started with a full sheet of Maple plywood. I broke it down into manageable chunks using my track saw.)
• Refreshing Oxalis Kvas  + (Step 3: Boil then some water and pour it into the pot with herbs.)
• How to Create Spotify Codes for Sharing with Others  + ('''Step 1.''' Open the Spotify app and tap … '''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
• How to Clear Tidal Cache on iOS and Android  + ('''Step 1.''' On the Home screen of your A … '''Step 1.''' On the Home screen of your Android phone, press and hold the '''Tidal app icon''' until a menu appears. '''Step 2.''' Tap the icon with i to enter the app’s settings. Or you can go to '''Settings''' > '''Apps''' > '''Tidal''' to set up, too. '''Step 3.''' On the detail page, tap '''Storage & cache''' and then '''Clear cache'''.''Storage & cache''' and then '''Clear cache'''.)
• Biped dancing robot  + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
• Biped dancing robot  + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
• Jeu  + (Sur ce plateau nous l'avons délimité en 25 cases de 5,8cm x 5,6cm grâce à la découpe laser et ensuite inscrit les chiffres des cases de 1 à 25.)
• ASKotec Tutorials - DIY Simple analog synth  + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
• ASKotec Tutorials - DIY Simple analog synth  + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
• Fruit piano  + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
• Fruit piano  + (The activity consists in turning fruits in … The activity consists in turning fruits into a keyboard to play music with. To get started, plug the makey makey (or DIY makey makey with Arduino Leonardo) to your computer and connect all bananas (or other conductive items) to the board via alligator clips.e items) to the board via alligator clips.)
• EMI probe 12+ activities  + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
• DIY Makey Makey with Arduino Leonardo  + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
• DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
• DIY Custom NeoPixel Rings From Scratch!  + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
• Marble Machine No 1 Motor Assembly Instructions  + (The parts can be glued together in one go … The parts can be glued together in one go and the parts held in place with rubber bands  The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
• PiKon telescope  + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
• What is Gua Sha Therapy  + (The skin on our necks can be very delicate … The skin on our necks can be very delicate, but it’s also easily hung up on the way through life. These sensitive areas become even more noticeable as we age. Triggered by stress or prolonged sun exposure, they can lead to redness, lines, and discoloration. Gua sha is one of the most effective ways to treat these unwanted signs of aging. This basic gua sha technique focuses on the neck. Gently apply pressure to the areas indicated using your fingertips or a depilatory scraper or spoon—try a nice wooden one you find in the kitchen! Go back and forth over one area at a time until desired results are achieved. Add our [https://www.sayheybeauty.com/products/jade-face-massage-roller-gua-sha-neck-massage Gua Sha Neck Massage] set to your skincare routine for smoother, younger looking skin.outine for smoother, younger looking skin.)
• Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing  + (The [https://www.seeedstudio.com/60GHz-mmW … The [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
• Showerloop - Guide 2: Filters  + (There are 2 lids per filter, the top lid a … There are 2 lids per filter, the top lid and bottom lid - duh. A hex nut is used to fasten the hose nipple (facing away from the filter) to the filter lid. The dimensions of hex nuts and/or hose nipples may vary regionally so it's best to get them first,check the measurements and modify the file if needed. In the picture of the lid only a circle was etched/milled into the acrylic lid to fit the hex nut but the design was later revised to have the shape of the hex nut itself, thereby fastening it to the lid so that it could no longer rotate (and prevent fastening) when adding the hose nipple on the outer side of the lid. hose nipple on the outer side of the lid.)
• How to Play Spotify on Yoto Player  + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
• Node-Red Telegram Bot with Temperature Logger Part-1  + (In this article, I will show you how to us … In this article, I will show you how to use Node-RED and Telegram bot to send temperature data from a DHT11 sensor connected to a Raspberry Pi. You will be able to ask your Telegram bot for the current temperature and receive a reply with the sensor reading. You will also be able to set up a notification system that will alert you when the temperature exceeds a certain threshold. To follow this tutorial, you will need the following components: * A Raspberry Pi with Node-RED installed (you can follow [https://nodered.org/docs/getting-started/raspberrypi this guide] to install Node-RED on your Raspberry Pi) * A DHT11 temperature and humidity sensor * A Telegram account and a Telegram bot token (you can follow [https://core.telegram.org/bots this guide] to create a Telegram bot and get its token)o create a Telegram bot and get its token))
• Wio WM1110: Quick Start Guide for Seamless Integration  + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
• Get Ready for Amazon Fashion's Big Style Sale - Don't Miss Out on These Amazing Deals!  + (This year, Amazon has truly stepped up wit … This year, Amazon has truly stepped up with its first-ever Big Style Sale dedicated entirely to fashion. Unlike their general sales, this event is focused exclusively on clothing, shoes, and accessories from over 100 brands. You’ll find well-known names alongside smaller, up-and-coming designers, making it a fantastic opportunity to explore fresh styles and try out brands you may not have discovered otherwise.nds you may not have discovered otherwise.)
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• Imprimer un objet avec ULTIMAKER  + ('''Traduire le fichier dans un format lisible par le logiciel CURA''' * Sous l'onglet fichier sélectionner : '''''exporter''''' *Dans la fenêtre '''choisir''' le type : **STL Mesh ('''*.stl''' '''*.ast''') **Alias Mesh ('''*.obj''') '''Enregistrer''')
• Anèmomètre  + (utiliser les fichiers STL https://gitlab.com/norbertwalter67/Windsensor_WiFi_1000/-/tree/master/CAD-Files/3D-Parts/STL?ref_type=heads)
• ESP32 with WebSerial: A Comprehensive Guide  + (WebSerial is a web standard that allows we … WebSerial is a web standard that allows websites to communicate with serial devices. It bridges the web and the physical world, enabling web applications to interact with hardware devices. This opens up a world of possibilities for IoT projects, allowing real-time interaction between web applications and physical devices.een web applications and physical devices.)
• Implementing Web Server on ESP32  + (=== What is a Web Server? === A web server … === What is a Web Server? === A web server is a software application that serves web pages to users. When a user requests a web page, the web server processes the request and sends the requested page back to the user’s browser. This forms the backbone of data communication on the World Wide Web. === What is ESP32? === The ESP32 is a series of low-cost, low-power systems on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor and includes built-in antenna switches, an RF balun, a power amplifier, a low-noise receiver amplifier, filters, and power management modules. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming.e demanding tasks such as music streaming.)
• Empty room activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
• Brightness control activity v12  + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• Thermostat control activity v12  + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• VERBIS - Desktop 8x8 RGB LED Matrix Word Clock  + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
• Menstrual Cup - 3D Cup  + ( * http://www.leparisien.fr/laparisienne/actualites/societe/tampons-et-serviettes-hygieniques-des-produits-de-luxe-07-05-2018-7703358.php * https://www.youtube.com/watch?time_continue=23&v=GXqF9H2aMBw )
• Getting Started with 3.5 Inch PC State Display  + (If you are a PC enthusiast, you might want … If you are a PC enthusiast, you might want to monitor the performance and status of your PC components, such as CPU, GPU, RAM, SSD, HDD, temperature, fan speed, etc. However, opening the task manager or third-party software every time you want to check this information can be inconvenient and distracting. Moreover, you might not be able to see this information when you are gaming or doing other full-screen activities. That’s why a 3.5-inch PC state display can be a great addition to your PC setup. A 3.5-inch PC state display is a small screen that can be mounted on your PC case and display various information about your PC state. It can show you the CPU model, usage, frequency, temperature, fan speed, GPU model, usage, frequency, temperature, fan speed, RAM usage, SSD/HDD usage, network speed, IP address, weather forecast, and custom information. You can also choose from different themes and orientations to suit your preferences. A 3.5-inch PC state display can help you monitor your PC state at a glance, without interrupting your workflow or gaming experience. It can also enhance the aesthetics and functionality of your PC case, making it more personalized and attractive. Whether you are a gamer, a streamer, a content creator, or a professional, a 3.5-inch PC state display can be a useful and fun tool for your PC. In this article, I will show you how to get started with a 3.5-inch PC state display, how to install it, how to customize it, and how to use it. Let’s begin!tomize it, and how to use it. Let’s begin!)
• Getting Started with TivaWare Launchpad - Basics  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• AWS IoT Core IoT Platform Series - 6  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node Red Controlled Web LED on ESP32 with Raspberry Pi 4  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
• Node Red with Raspberry Pi  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Node-Red Telegram Bot with Temperature Logger Part-2  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Line Follower Robot - King of Maze  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Ethernet-Enhanced LoRa Gateway Minimizing Delay  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• DHT11 with ESPNOW  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] toget them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
• Temperature Control Neo Pixels with Arduino Nano  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here]. Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• Testing NB-IoT connectivity in India with NRF9160 and Airtel  + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
• OpenKnit: digital fabrication tool to create your own clothes  + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
• ESP32 DHT22 IFTTT  + (You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny: *Go to https://thonny.org/ *Download *Install and then open)

• ESP32 DHT22 IFTTT  + (Name the event for the trigger '''esp32''' (it is case sensitive so be careful))

• Jeu de dames et d'échecs - v2  + (''Et voilà on a un projet (enfin on en a d … ''Et voilà on a un projet (enfin on en a d'autres, mais on va commencer par celui-ci), y'a plus qu'à !'' ===L'aventure commence...=== On décide d'une taille de plateau de 30cm de coté. Du coup on aura des cases des 3cm de coté ''(un damier faisant 10 cases sur 10...)'' Plus un bord de 1,5cm de chaque coté, avec coins arrondis ''(pour faire joli, on le regrettera peut-être plus tard, vous verrez !)'' ''Voilà on sait ce qu'on veut !'' ===Concrètement=== ====1ère ligne==== Sous Inkscape : - définir la zone de travail de 300mm sur 300mm ''(oui on ne tient pas compte du bord, c'est voulu)'' - 1ère case (noire) : dessiner un carré de 30mm sur 30mm (noir) - 2ème case (blanche) : en fait, on ne dessine pas les cases blanches :) - 3ème case (noire ''si vous suivez'') : on est de gros fainéants ''(enfin surtout moi, ma fille çà va)'', un bon coup de copier/coller de la case 1 et hop on est bon... - 4ème (blanche donc) : on ne dessine toujours rien ! Bon, à partir de la faut quand même être sérieux, les cases qui se baladent n'importe ou çà ne fait pas un damier, il faut les positionner... ''Si vous connaissez la table du 3, c'est facile !'' - 1ère case : X = 0 / Y = 0 ''(faut bien commencer et çà facilite les calculs)'' - 2ème case : pas de 2ème case, donc pas de position... - 3ème case : X = 60mm (la largeur des 2 cases précédentes !) / Y = 0 (on forme la 1ère ligne) Copier/coller des 2 premières cases noires et positionnement à X=120mm/Y=0 Et voilà déjà 8 cases de faites... On continue avec un copier/coller de 2 cases, en X=180mm/Y=0 Voilà on a fait notre 1ère ligne !!! BRAVO ! ====2ème ligne==== Toujours dans l'économie, copier/coller de la première ligne, et là petite subtilité, la 2ème ligne est en décalage avec la 1ère ''(bah oui c'est un damier, pas des rayures...)'' : positionnement en X=30mm/Y=30mm (2ème ligne/ 2ème colonne) ====La suite==== Vous ferez les calculs de positionnement, mais il suffit de copier les lignes 1 à 2 pour faire les lignes 3 et 4, puis les lignes 1 à 4 pour faire les lignes 5 à 8, puis les lignes 1 à 2 (ou 3 à 4 ou 5 à 6... mais pas 2 à 3...) pour obtenir un joli damier de 10 cases sur 10 cases :) ''Bravo, on y est presque !!!'' ====Finitions==== Bon tout çà c'est bien joli, mais c'est du marquage, il faut aussi s'occuper de la découpe ! Pour le tour du plateau : on a donc 15mm de marge de chaque coté, un carré de 330mm par 330mm à positionner à X=-15mm/Y=-15mm Un petit coup d'arrondissement des angles et c'est parti... ===Conclusion de la 1ère étape=== Temps de travail : 1à 2h ''(difficile à estimer a posteriori)'' ''KiKaFaitKoi : la cogitation a été conjointe, lors de la modélisation Katia était au clavier et à la souris pendant que j'essayais d'anticiper les problèmes.''
  L'aspect mathématique du damier et le choix de cases de 30mm ont beaucoup facilité la conception... et favorisé les copier/coller
  ''C'était assez fun et finalement très rapide (sachant que c'était notre première approche, si c'était à refaire en 1/4h ce serait fait je pense)'' La suite : passage sur la machine ! approche, si c'était à refaire en 1/4h ce serait fait je pense)'' La suite : passage sur la machine !)
• Librem 5 Case Creating Community  + ( * for advertisement and spreading the word on Purism's blog / news site and on social media * for resources, for example a 3d file of the outer shape of the phone or a basic case file )
• Testing testing testing  + (<div class="icon-instructions caution-icon"> <div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div> <div class="icon-instructions-text">be careful. here. </div> </div>)
• ESP32 HC-SR04 Ultrasonic IFTTT  + (<nowiki><br/><div class="mw …
  

  import machine
  import time
  import urequests
  import network
  
  # Wi-Fi credentials
  ssid = 'wifi_name' #input your own wifi name
  password = 'password' #input your own password
  
  # IFTTT webhook key
  api_key = 'your_own_key' #input your own key
  
  # Connect to Wi-Fi
  station = network.WLAN(network.STA_IF)
  station.active(True)
  station.connect(ssid, password)
  while station.isconnected() == False:
      pass
  print('Connection successful')
  print(station.ifconfig())
  
  # Set up ultrasonic sensor
  trigger = machine.Pin(4, machine.Pin.OUT)
  echo = machine.Pin(5, machine.Pin.IN)
  
  
  def main():
      while True:
          # Send trigger pulse
          trigger.value(0)
          time.sleep_us(5)
          trigger.value(1)
          time.sleep_us(10)
          trigger.value(0)
  
          # Measure duration of echo pulse
          while echo.value() == 0:
              start = time.ticks_us()
          while echo.value() == 1:
              end = time.ticks_us()
          duration = time.ticks_diff(end, start)
  
          # Calculate distance
          distance = duration * 0.034 / 2
          
  
          # Send data to IFTTT
          data = {'value1': distance}
          submitData("ultrasonic_distance", data)
  
  
          # Delay before next measurement
          time.sleep(5)
  
  def submitData(event, data):
      try:
          print('Sending data to IFTTT:', data)
          request_headers = {'Content-Type': 'application/json'}
          request = urequests.post(
              'https://maker.ifttt.com/trigger/'+ event + '/with/key/' + api_key,
              json=data,headers=request_headers)
          print(request.text)
          request.close()
      except OSError as e:
          print('Failed to send data to IFTTT.', e)
   
  if __name__ == '__main__':
      main()

  )<br /> request.close()<br /> except OSError as e:<br /> print('Failed to send data to IFTTT.', e)<br /> <br />if __name__ == '__main__':<br /> main()</pre></div></nowiki>)
• Choose business  + (Keeping your dog’s teeth clean and healthy … Keeping your dog’s teeth clean and healthy is essential for their overall well-being. While regular brushing is the most effective way to maintain oral hygiene, dental bones offer a convenient and enjoyable alternative. This article will explore what [https://peidigroup.com/collection/chewnergy healthy dog dental chews] are, their benefits, how to choose the right dental bone, and tips for safe usage. === 1. '''What Are Dental Bones for Dogs?''' === Dental bones are specially designed chews that help clean a dog’s teeth and freshen their breath while satisfying their natural urge to chew. Made from various materials and infused with flavors, these bones are formulated to promote dental health through mechanical action as the dog chews. They come in different shapes, sizes, and formulations to cater to various dog breeds and chewing habits. === 2. '''Benefits of Dental Bones''' === Dental bones offer multiple benefits beyond just being a tasty treat for your pet: ==== '''1. Reduces Plaque and Tartar Build-Up''' ==== The chewing action helps scrape away plaque and tartar from your dog’s teeth, reducing the risk of dental disease and related issues such as bad breath and gum inflammation. ==== '''2. Promotes Fresh Breath''' ==== Many dental bones are made with ingredients that help neutralize odor-causing bacteria in your dog’s mouth, leading to fresher breath. ==== '''3. Supports Healthy Gums''' ==== Chewing on dental bones stimulates the gums and can improve blood circulation, which helps maintain gum health. ==== '''4. Provides Mental Stimulation''' ==== Chewing is a natural behavior for dogs and helps keep them mentally stimulated. Dental bones provide an outlet for this instinct, reducing boredom and destructive chewing behavior. === 3. '''Types of Dental Bones for Dogs''' === There are several types of dental bones available, each with its own unique features: ==== '''1. Natural Dental Chews''' ==== These are made from natural ingredients and often contain no artificial additives. They can be formulated with flavors like chicken or beef to entice your dog while promoting dental health. ==== '''2. Edible Dental Bones''' ==== These dental chews are designed to be consumed and are typically made from digestible ingredients that break down easily in a dog’s stomach. ==== '''3. Non-Edible Dental Chews''' ==== These chews are durable and intended for long-lasting use. They are often made from nylon or rubber and infused with flavors. While they provide the benefit of consistent chewing, they should only be given under supervision to prevent potential hazards if pieces break off. === 4. '''Choosing the Right Dental Bone for Your Dog''' === Selecting the appropriate dental bone for your pet depends on several factors: ==== '''1. Size and Chewing Strength''' ==== Ensure that the dental bone is the right size for your dog. Larger dogs need bigger, more durable chews, while smaller dogs require appropriately sized bones. Dogs with strong chewing habits might need tougher dental bones to prevent rapid consumption or breakage. ==== '''2. Ingredients''' ==== Check the ingredient list for any potential allergens or artificial additives. Natural ingredients are always preferable, especially if your dog has a sensitive stomach. ==== '''3. Texture and Hardness''' ==== The texture should be firm enough to clean the teeth effectively but not so hard that it risks damaging the dog’s teeth. Softer dental chews are suitable for older dogs or those with dental issues. ==== '''4. Veterinary Recommendations''' ==== Consult with your veterinarian to ensure the dental bone you choose is suitable for your dog’s age, size, and health needs. === 5. '''Safety Tips for Giving Dental Bones to Your Dog''' === While dental bones are beneficial, it’s essential to use them safely: * '''Supervise Chewing''': Always monitor your dog when they are chewing a dental bone to prevent choking or accidental ingestion of large pieces. * '''Appropriate Size''': Choose a dental bone that is large enough that your dog cannot swallow it whole. * '''Limit Chewing Time''': Set a time limit for chewing sessions to avoid excessive wear on your dog’s teeth. * '''Replace When Needed''': Discard dental chews that become small enough to be a choking hazard or if they show signs of significant wear. === 6. '''Homemade Dental Bone Recipe''' === For those who prefer a DIY approach, here’s a simple recipe for homemade dental chews: '''Ingredients''': * 1 cup of pumpkin puree (unsweetened) * 1 egg * 3 tablespoons of coconut oil * 2 1/2 cups of whole wheat flour * 1/2 cup of mint leaves (optional for fresh breath) '''Instructions''': # '''Preheat the Oven''': Set the oven to 350°F (175°C). # '''Mix Ingredients''': Combine the pumpkin puree, egg, and coconut oil in a bowl. # '''Add Flour and Mint''': Gradually mix in the flour and mint leaves to form a dough. # '''Shape the Chews''': Roll out the dough and cut it into bone shapes. # '''Bake''': Place the chews on a baking sheet and bake for 25-30 minutes or until firm. # '''Cool Before Serving''': Let the chews cool completely before giving them to your dog. === 7. '''Conclusion''' === Dental bones for dogs are an effective way to maintain oral hygiene while providing a satisfying and stimulating activity. Whether store-bought or homemade, the right dental bone can support dental health, reduce tartar and plaque, and keep your dog’s breath fresh. Always consider your dog’s specific needs and consult with a veterinarian to choose the best dental chews for their health and safety. dental chews for their health and safety.)
• What are the top 10 Indian stocks for a retirement portfolio for a person in mid-50  + (Most investors want to make investments th … Most investors want to make investments that will provide them with significant returns as rapidly as possible while minimizing the danger of losing their principal. This is why so many people are on the search for great investment programs that will allow them to double their money in a matter of months or years while posing little or no risk. Unfortunately, there is no such thing as a high-return, low-risk investment product. In fact, risk and return are inextricably linked; they go hand in hand, i.e., the higher the risk, the higher the reward. When it comes to saving for their financial goals, Indians consider the following investment alternatives. '''1 Direct Investment''' Because stocks are a volatile asset with no guarantee of profits, they may not be suitable for everyone. Furthermore, it is difficult not only to select the suitable stock, but also to timing your entry and exit.The only silver lining is that stock has beaten all other asset classes in terms of inflation-adjusted returns over long periods of time. '''2 Mutual funds are a type of investment that allows you''' Equity mutual funds are mutual funds that invest largely in stocks. According to the Securities and Exchange Board of India (SEBI) Mutual Fund Regulations, an equity mutual fund scheme must invest at least 65 percent of its assets in stocks and equity-related securities. An equity fund might be actively or passively managed. '''3 Dept Mutual funds''' Debt mutual fund schemes are perfect for investors who want a steady income source. They are less volatile than equity funds and so considered less risky. Debt mutual funds invest primarily in fixed-income assets such as corporate bonds, government securities, treasury bills, commercial paper, and other money market instruments. These mutual funds, on the other hand, are not risk-free. They are fraught with dangers such as high interest rates and credit risk. '''4 National Pensions Systems.''' The Pension Fund Regulatory and Development Authority (PFRDA) manages the National Pension System (NPS), which is a long-term retirement-focused investment product. The annual fee for maintaining an NPS Tier-1 account has been reduced from Rs 6,000 to Rs 1,000. Stocks, term deposits, corporate bonds, liquid funds, and government funds are all included. Based on your risk appetite, you can decide how much you wish to risk. '''5 Public Provident Funds (PPFs).''' Compounding of tax-free interest has a substantial impact, especially in the later years, because PPFs have a 15-year tenure. It's also a safe bet because the interest earned and the principle invested are both backed by the government. Remember that the PPF interest rate is reviewed by the government every quarter. '''6 Bank Fixed deposit (FD)''' In India, a bank fixed deposit is seen as a safer investment than stocks or mutual funds. The deposit insurance and credit guarantee corporation (DICGC) guidelines cover each depositor in a bank up to a limit of Rs 5 lakh for both principle and interest as of February 4, 2020. Previously, the maximum principle and interest coverage was Rs 1 lakh. Depending on your preferences, you can choose between monthly, quarterly, half-yearly, yearly or cumulative interest possibilities. The interest rate is applied to one's earnings and taxed in accordance with one's tax bracket. '''7 Senior Citizens' Saving Scheme (SCSS)''' Most retirees' first option is the Senior Citizens' Saving Scheme, which is a must-have in their financial portfolios. As the name implies, this service is only for older citizens or early retirees. SCSS can be applied for at a post office or a bank by anyone over the age of 60. SCSS has a five-year duration, which can be extended by three years if the scheme matures. You have a maximum investment limit of Rs 15 lakhs. It's also feasible to create more than one account. SCSS interest is paid four times a year and is fully taxed. Keep in mind that the scheme's interest rate is reviewed and adjusted on a quarterly basis. The interest rate on an investment in the scheme, on the other hand, will not vary until the scheme matures. Senior people can deduct up to Rs 50,000 in interest from SCSS in a financial year under Section 80TTB. '''8 Pradhan Mantri Vaya Vandana Yojana (PMVVY)''' PMVVY is a savings plan for people over the age of 60 that guarantees a 7.4% yearly return. Depending on your preferences, your pension income may be paid monthly, quarterly, half-yearly, or annually. The minimum and maximum monthly pensions are Rs 1,000 and Rs 9,250, respectively. A maximum investment of Rs 15 lakh is allowed under the scheme. The project will last for ten years. The plan will remain in effect until March 31, 2023The senior individual receives a repayment of the amount invested at the conclusion of the term. The money will be paid to the nominee in the event of a senior citizen's death. '''9 Investing in Real Estate''' Your home is for your personal use only and should never be viewed as an investment. If you don't plan to live in the second house you buy, it can be used as an investment. The location of your home is the single most important factor that will determine its value and potential rental income. Capital appreciation and rental income are the two ways that real estate investments pay returns. '''10 Gold''' Having gold in the form of jewellery has its own set of problems, such as security and expense. Then there are the ‘making charges,' which typically vary between 6% and 14% of the gold price (and may go as high as 25 percent in case of special designs). For those who are interested, there is still time to purchase gold coins. A number of banks now sell gold coins. Paper gold is a unique way to get gold. Investing in paper gold is more cost-effective and can be done through gold ETFs. Such investment (buying and selling) takes place on a stock exchange when gold is the underlying asset (NSE or BSE). Investing in Sovereign Gold Bonds is another option to possess paper gold. Just [https://www.indiratrade.com/open-demat-account open demat account online] with [https://www.indiratrade.com/blog/stock-broker-firms-in-india/5040 best indian stock broker] and start investment for your retirement. Choose your [https://www.indiratrade.com/ india's best stock broker] and search lowest [https://www.indiratrade.com/tools/brokerage-calculator securities brokerage] services. Find [https://www.indiratrade.com/ India's Best Stock Broker] because its one of the major part for successful [https://www.indiratrade.com/algo-trading algo trading]. '''Open demat account Online''' and use [https://www.indiratrade.com/mobile-trading '''best share trading app in india'''] for start your trading journey with the best full-service providing brokerage firm in Central India.providing brokerage firm in Central India.)
• How to make party poppers  + (Party poppers are a delightful way to add … Party poppers are a delightful way to add an extra burst of fun to any occasion. Whether it's a birthday, wedding, or New Year's Eve celebration, these colorful and confetti-filled surprises can make your event even more memorable. Making your own party poppers is not only easy but also allows you to customize them to fit the theme of your celebration. In this guide, we'll walk you through the supplies needed, the step-by-step process, and some creative ideas on how to use them. == Supplies Needed for DIY Party Poppers == Before you begin crafting your party poppers, gather the following supplies: * '''1 empty paper towel tube or tissue paper roll:''' This will serve as the main body of the popper. * '''Glitter, confetti, and small party favors:''' Fill your poppers with glitter, fortunes, horoscopes, confetti, mints, funny notes, chocolate coins, or small party favors. * '''12-by-12-inch piece of wrapping or tissue paper:''' Choose a paper that matches your event's theme or color scheme. * '''Scissors:''' To cut the cardboard tube and wrapping paper. * '''Glue gun or tape:''' Secure the wrapping paper around the tubes. * '''Ribbon:''' Add a decorative touch and help secure the ends of the popper. == Step-by-Step Directions for Making Party Poppers == === 1. Prepare the Cardboard Tubes === Begin by cutting the cardboard tube in half. Next, cut one of the halves in half again, leaving you with three smaller tubes of different sizes. These will form the body of your party poppers. === 2. Fill the Tubes === Now that you have your tubes ready, it's time to fill them. Add glitter, confetti, and any small party favors you’ve selected. The contents will create the "pop" when the popper is used, so be sure to pack them well but not too tightly. === 3. Wrap the Tubes === Lay your 12-by-12-inch piece of wrapping paper face down on a flat surface. Arrange the three filled tubes in an even row at the edge of the paper, leaving about a 1/2-inch space between each tube. Carefully glue or tape the edge of the wrapping paper along the length of the tubes to secure them in place. Roll the paper over the tubes until they are fully wrapped, then trim any excess paper, including from the ends of the tubes. === 4. Add Finishing Touches === Gently twist the wrapping paper at the spaces between the tubes to create the classic party popper shape. Secure each twisted section with a piece of ribbon for a festive look. The ribbon not only adds flair but also helps hold the popper together. === 5. Display and Use Your Party Poppers === Your party poppers are now ready! You can add them to your table settings, place a bunch in a large glass bowl as a centerpiece, or hand them out to guests right before the big moment. == Tips and Variations for Creative Party Poppers == * '''Easy Breakage:''' Before giving the poppers to your guests, use a pin to poke holes around the edges of the tube. This will make it easier for the popper to break open when pulled. * '''Size Variations:''' For smaller poppers, use cardboard tubes from wrapping paper rolls instead of paper towel tubes. * '''Personalization:''' Create a personalized look by wrapping the tubes with color copies of family photos or images that match the theme of your event. == Where and How to Use Party Poppers == Party poppers are versatile and can be used in various types of celebrations. Here are some ideas for where and how to use them: === 1. '''Birthday Parties''' === Party poppers can be used when the birthday person makes a wish and blows out the candles. Alternatively, they can be given out as party favors to guests as a fun takeaway. === 2. '''Weddings''' === Instead of the traditional rice or confetti, guests can pop party poppers during the newlyweds’ send-off, creating a spectacular photo opportunity. === 3. '''New Year's Eve''' === Distribute party poppers to guests before midnight. When the clock strikes twelve, everyone can pop them to celebrate the arrival of the new year. === 4. '''Gender Reveal Parties''' === Fill the poppers with pink or blue confetti for a fun and interactive way to reveal the baby's gender to family and friends. === 5. '''Graduation Parties''' === Celebrate the graduate's achievement by popping the poppers during the ceremony or at the party. It’s a great way to mark the big moment with a burst of excitement. === 6. '''Holiday Gatherings''' === Whether it’s Christmas, Halloween, or the Fourth of July, you can customize the poppers with thematic colors and confetti to add a festive touch to your holiday celebrations. === 7. '''Engagement Parties or Proposals''' === Celebrate love with a unique twist by filling the poppers with rose petals or themed confetti. It’s a memorable way to enhance the moment. === 8. '''Retirement Celebrations''' === Mark the transition from work to retirement with the joyous noise and visual delight of party poppers. === 9. '''Anniversary Parties''' === Party poppers are perfect for any anniversary celebration, adding a joyful burst of color and fun to the occasion. === 10. '''Welcome Home Parties''' === Celebrate a loved one’s return with the cheerful explosion of party poppers, making their homecoming even more special. == Conclusion == Making your own party poppers is a fun, easy, and creative way to add an extra layer of excitement to any event. Whether you’re celebrating a birthday, wedding, or holiday, these DIY poppers can be customized to fit any theme and are sure to be a hit with your guests. So gather your supplies, follow the steps, and get ready to pop your way to a fantastic celebration! [https://www.designsforcricut.com/product/Elegant-Cricut-Catio-Designs-Custom-Monogram-for-Cat-Lovers Cricut catio designs] , [https://www.designsforcricut.com/category/monograms/3dfont Cricut 3d fonts for logos]onograms/3dfont Cricut 3d fonts for logos])
• Qubitro Device Data - IoT Platform Series  + (<nowiki>To get started with Qubitro, … To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account.
  
  
  Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account. shall automatically be logged in to our account.</nowiki>)
• Découpeuse Graveuse Laser Gravograph LS900XP  + (Appuyer sur le bouton de mise sous tension … Appuyer sur le bouton de mise sous tension (I/O) afin d'éteindre la machine. Fermer le logiciel (si personne n'a réservé pour la suite)
  Enregistrer votre travail
  
  class="icon-instructions-text">Enregistrer votre travail</div> </div><br/>)
• Gravure photo en 3 étapes et l'option relief  + (Aprés avoir choisit l'image qui sera gravé … Aprés avoir choisit l'image qui sera gravée, il faut la préparer en amont. C'est à dire retirer le fond de l'image si on ne souhaite pas le graver par exemple. Il y a des applications en ligne gratuite qui le font plus ou moins bien. Si le résultat ne convient pas, passez par un logiciel de photo montage. Pour améliorer le contraste de l'image, je régule le niveau des blancs et des noirs. L'image convenant, on l'enregistre en jpeg par exemple pour pouvoir l'utiliser dans Inkscapemple pour pouvoir l'utiliser dans Inkscape)
• Open Documentation training  + ( * arrange your tables to groups * arrange your participants in groups * cycle rules and reflection )
• Open Documentation training  + ( * arrange your tables to groups * arrange your participants in groups * cycle rules and reflection )
• MUTED - boitier biodata vers module de synthétiseur analogique  + (Attention, il faut d'abord être capable de … Attention, il faut d'abord être capable de brancher une plante sur une carte électronique pour capter et transformer de minuscules variations électriques. Ceci vous prendra entre deux heures et une demi-journée [http://wikifab.org/wiki/Capteur_BioData_pour_ESP32 en suivant le tuto de Stéphane Godin.]P32 en suivant le tuto de Stéphane Godin.])
• Controleur de pH  + (Avant de commencer les raccordements, nous avons pris des planches de bois et de plexiglas qui serviront de support. les découpes ont été effectué à l'aide d'une découpeuse laser.)
• How to Use a Polishing Machine: A Step-by-Step Guide  + (Before using a polishing machine, it is es … Before using a polishing machine, it is essential to take safety precautions to prevent accidents. Always wear protective gear such as safety glasses, a dust mask, and gloves to protect your eyes, lungs, and skin from the dust and debris generated during polishing. Additionally, ensure that the work area is well-ventilated to prevent dust buildup and minimize the risk of fire hazards. Finally, disconnect the power supply before changing any polishing wheels or performing maintenance on the machine. or performing maintenance on the machine.)
• Build a Longboard from Scratch in Your Own Home  + (Before you start putting together your lon … Before you start putting together your longboard, you'll need to do some cutting and drilling. Begin by cutting your threaded rods into two pieces, each 8 inches long. Use a fret file to smooth out the rods, which are 5/16" x 12" inches in size. Next, apply grip tape to the board. Cut the grip tape to be about one centimeter wider than the board, then press it onto the board and trim off any excess. With your 6º wedge riser, mark where you'll drill to attach the INOX Allen bolts, which are 1/4" x 1.5" in size. Ensure the marks are centered on the ends of your board. Safety is crucial, so wear gloves and safety glasses during this process. Carefully drill four holes, making sure they are clean and precise. We used a 3D-printed part to help us drill the holes in the cap perfectly centered. If you'd like access to the design for this part, please let us know, and we'll share it with you. Finally, position the drill in the middle of your 1" cap and drill each hole carefully. The 1" cap should have a similar appearance to the one shown in the image. appearance to the one shown in the image.)
• Bucket stool made of wood and concrete  + (Bend the sides of the bucket outwards a few times in each direction to loosen the concrete; then pull the stool out by the legs.)
• Bucket stool made of wood and concrete  + (Bend the sides of the bucket outwards a few times in each direction to loosen the concrete; then pull the stool out by the legs.)
• Documenter son projet  + (Ces images sont une ébauche de la document … Ces images sont une ébauche de la documentation d'un projet créée à partir du modèle. Inspiré des pages Wiki, ce modèle reprend tous les éléments dont vous avez besoin pour créer votre propre page de projet.
  Retrouvez le modèle en version française et anglaise dans les Fichiers.
  vez le modèle en version française et anglaise dans les Fichiers.</div> </div>)
• Conductive paint + Makey Makey  + (To check whether your conductive paint is … To check whether your conductive paint is indeed conductive, we can run a test with the aid of a voltmeter. Paint a straight line on a sheet of paper. Then place the two ends of the voltmeter (the red one and the black one) each at one end of the line. Place the cursor of the voltmeter in a position to read the value of resistance and a number should display on your voltmeter.a number should display on your voltmeter.)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• E-textile blinking bag  + (Connect one end of the micro usb cable to … Connect one end of the micro usb cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the LED patch to pin 13 on the Arduino Leonardo. Connect the negative leg of the LED patch to GND on the board. You can use either of the 3 GND pins available on the board. * black cable - GND * orange cable - pin 13 black cable - GND * orange cable - pin 13)
• Musical e-textile bag  + (Connect one end of the micro USB cable to … Connect one end of the micro USB cable to the computer, the other end to the Arduino Leonardo board. Connect the positive side of the piezo speaker patch to pin 13 on the Arduino leonardo Connect the negative leg of the piezo speaker patch to GND on the board. You can use either of the 3 GND pins available on the board. of the 3 GND pins available on the board.)
• Boite aux lettres Connectée ESP8266  + ('''<u>1/ Connexion du node MCU :< … '''1/ Connexion du node MCU :''' sur la platine de prototypage dans le sens de la longueur afin que les rangées de pattes du module ne soient pas connectées. Le Node MCU fonctionne en 3.3V mais les 2 composants utilisés fonctionnent avec 5V. Une PowerBank de 5V alimentera le dispositif. Il conviendra donc de connecter le capteur à ultrason et le player MP3 sur la broche Vin du node MCU afin de bénéficier des 5V en entrée. '''2/ Connexion du capteur :''' Vcc sur Vin de l'ESP Gnd sur Gnd Trig sur D1 Echo sur D2 '''3/ Connexion du player Groove MP3''' Vcc sur Vin Gnd sur Gnd Tx c'est le retour et ici nous ne l'utiliserons pas donc pas connecté Rx sur le Tx de l'ESP mais malheureusement après de nombreux essais infructueux il s'est avéré que les pin Rx et Tx de l'ESP n'étaient pas ceux qui devaient être utilisés. Un rapide coup d'oeil sur la documentation du module permet de voir que plusieurs pin peuvent faire office de Rx et Tx Les broches D7 et D8 de l'ESP font office également de Rx(2) et Tx(2) qui correspondent donc dans l'IDE Arduino aux GPIO 13 et 15 (ce sera important dans le code). Nous connectons donc le Rx du player MP3 à la broche D8 (Tx) de l'ESP afin que celui ci puisse envoyer ses informations. '''4/ Connexion du Jack du HP à l'entrée Jackdu player MP3''' Penser à l'alimentation du HP (power bank double USB) '''5/ Connexion du node au PC pour téléversement du code =) étape 2'''double USB) '''<u>5/ Connexion du node au PC pour téléversement du code =) étape 2</u>''')
• Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
• Build an Easy ISS Notifier  + (Create a cloud account at io.adafruit.com. … Create a cloud account at io.adafruit.com. Then click on Feeds→Actions→Create a New Feed. Name it “ISS.” Click the View AIO Key button, then copy your unique '''''key''''' somewhere safe — you’ll need it later to link your Tokymaker to your Adafruit IO feed.k your Tokymaker to your Adafruit IO feed.)
• Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
• Wooden pet connects to Facebook  + (Create a new feed by reaching https://io.adafruit.com/ > Feeds > Actions and then name it, for example “touchsensor”)
• Jeu plateau Mathis, J.S, Ethan et Roman  + (Créez des cartes avec des personnes connue … Créez des cartes avec des personnes connues qui auront un certain nombre d'énergies, mais aussi un point faible. Si le nombre d'énergies correspondant a l'incident (par exemple, tsunami : eau) de votre héro est le plus élevé de toutes les cartes posées par les autres joueurs, vous remportez la manche et donc, vous avancez votre pion d'une case. Si vous n'avez pas d'imprimante, dessinez vos propres cartes ! :)primante, dessinez vos propres cartes ! :))
• Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
• Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
• Spinning Kinetic Sculpture RGB  + (Cut the first svg file on 2 sheets of 300c … Cut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
• Bentolux - Module qualité de l'air ambiant  + ( *Decoupe au laser des parois de la boite (DOC1) *Assemblage de la boite (DOC2) *Branchement des composants (DOC3) *Programmation du code pour faire interagir les élements (ecran LCD, capteur Temp/Hum, anneau OLED) (DOC4) <br/> )
• Séchoir solaire compact  + ( *découpez les panneaux de bois avec les o … *découpez les panneaux de bois avec les outils à votre disposition (scie sur table, à onglet, à ruban, circulaire etc.) et selon le plan en photo et ou en svg dans l'onglet fichier du tuto (pour laser et cnc)
  Attention : l'emplacement des petits et grands trous dépend de l'épaisseur de vos tasseaux et de la taille du ventilateur que vous avez récupéré. En cas de doute, ne percez pas immédiatement
  pour la production de série, vous pouvez créer des modèles au laser ou à la CNC et découper les formes dans des planches de rebut à l'aide d'une défonceuse et d'une mèche à copier.
  r ou à la CNC et découper les formes dans des planches de rebut à l'aide d'une défonceuse et d'une mèche à copier.</div> </div> )
• Jeu en bois  + (Des carrés, des carrés ...... * 36 petits … Des carrés, des carrés ...... * 36 petits carrés (4x4 cm²) forment un grand carré (24x24cm²) qu'on appellera objet. * dupliquer cet objet (objet 2) * tracer un cadre autour d'un des deux objets à 1 cm tout autour (objet 1) * dans chaque case écrire les nombres de 1 à 36 sur l'objet 1 * fusionner des séries de 5 cases sur l'objet 2 pour avoir 7 formes différentes. Il reste une case seule, c'est normal !s. Il reste une case seule, c'est normal !)
• Montaje HPRO - Tutorial 8 - Calibración y Primeras Impresiones  + (El desfase en Z es la distancia a la cama … El desfase en Z es la distancia a la cama de la boquilla en el momento en el que el sensor de nivelación toca la plataforma. * Podemos usar PROBE_CALIBRATE desde la línea de comandos, para usar un asistente integrado en klipper. * También podemos usar la función incluida en klipperScreen.
  Una vez tenemos este valor, podemos hacer una primera impresión con un brim de gran tamaño, de esta forma podemos ajustar en vivo el Z offset, desde el LCD, la interfaz web o el TFT.
  Hay que tener cuidado con introducir un valor mayor del necesario, ya que podemos dañar la cama otras partes. Si tienes dudas, es mejor usar un valor bajo, y la base de cristal. Es más fácil y seguro empezar despegado, e ir pegando la impresión poco a poco, que al revés.
  
  se de cristal. Es más fácil y seguro empezar despegado, e ir pegando la impresión poco a poco, que al revés.</div> </div><br/>)
• Case pour synthétiseur modulaire 2*3U / 84hp  + (Le fichier contient un porte cables de patches, emboitable dans le case !)
• Case pour synthétiseur modulaire 2*3U / 84hp  + (Le fichier contient un porte cables de patches, emboitable dans le case !)
• Découpeuse Graveuse Laser Gravograph LS900XP  + (Fichier >>> Importer >>> … Fichier >>> Importer >>> "nom fichier" >>> Ouvrir Ou voir figure ci-contre
  Si votre fichier n'apparaît pas, sélectionnez le type de fichier
  Si vous importez un fichier PDF, vous aurez à l'écran la figure 2 (gardez les mêmes paramètres).
  gt; </div>Si vous importez un fichier PDF, vous aurez à l'écran la figure 2 (gardez les mêmes paramètres).<br/>)
• Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
• Hands up Ready Go Scratch tutorial  + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
• Self-learning connected thermostat that optimizes heating and cooling of buildings  + (First, you need hardware. In our case, tha … First, you need hardware. In our case, that means sensors for temperature and humidity, plus a motion sensor to figure out whether you're home, and relays to control the furnace and the fan. We also need a display so you can see the current temperature, and an enclosure to protect the messy bits. Breadboard the hardware (breadboarding is a non-permanent way to create an early hardware prototype). We chose a number of components for this product (see the list of components above). All in all, it took about an hour to throw together this breadboarded prototype, although we had to order the components a couple of days beforehand. It took another couple of hours to pull together working firmware (see the software section below).firmware (see the software section below).)
• Self-learning connected thermostat that optimizes heating and cooling of buildings  + (First, you need hardware. In our case, tha … First, you need hardware. In our case, that means sensors for temperature and humidity, plus a motion sensor to figure out whether you're home, and relays to control the furnace and the fan. We also need a display so you can see the current temperature, and an enclosure to protect the messy bits. Breadboard the hardware (breadboarding is a non-permanent way to create an early hardware prototype). We chose a number of components for this product (see the list of components above). All in all, it took about an hour to throw together this breadboarded prototype, although we had to order the components a couple of days beforehand. It took another couple of hours to pull together working firmware (see the software section below).firmware (see the software section below).)
• Showerloop - Guide 4: Make the backplate  + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
• Showerloop - Guide 4: Make the backplate  + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
• Connected weather station 12+ activities  + (Follow the instructions on page 1-4 on [https://docs.google.com/document/d/1-vYvPHrhgW4SdtgnfV-NSKyZqliaPFgTpFc4Ti0uxh4/edit?usp=sharing <u>this </u>]tutorial.)
• Connected weather station 9-11 activities  + (Follow the instructions on page 1-4 on tutorial)
• Salad tongs  + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
• Salad tongs  + (For the functional tongs, I use a large ch … For the functional tongs, I use a large chunk of basswood. I drew out the spatula-like shape on the face and cut the thick piece of wood on the band saw. I then turned the piece on its side and resawed the basswood into my two handles. These two halves were still pretty thick and the shape was not yet finalized, all of that would be done with the sanders.ll of that would be done with the sanders.)
• Visual Gesture Controlled IoT Car  + (Have you watched the movie 'Project Almana … Have you watched the movie 'Project Almanac'? Which was released in the year 2015. If not, then let me brief you a scene about it. In the movie, the main character wishes to get into MIT and therefore, builds a project for his portfolio. The project was about a drone, that could be controlled using a 2.4GHz remote controller, but when the software application on the laptop was run, the main character was seen controlling the drone with his hands in the air! The software application used a webcam to track the the movement of the character's hand movements.ovement of the character's hand movements.)
• Mosquitto MQTT - IoT Platform Series  + (Here, there are 2 sections - '''Publish an … Here, there are 2 sections - '''Publish and Subscribe'''. And then there is a middleman - '''Broker'''. Let us see in depth * IoT Devices play the role to collect sensor data and send to the cloud (broker). While '''PC''' '''/''' '''Server''' '''/''' '''Mobile devices''' play the role to monitor and receive the sensor data to be viewed - Here, '''IoT Device''' is a '''Publisher''', and '''PC Devices''' are '''Subscriber'''.

  [EXAMPLE] When a '''user1''' publishes an image on social media, then only the '''user2''' subscribed to '''user1''' can view/receive the image. Here, the '''user1''' is the '''PUBLISHER''', '''user2''' is the '''SUBSCRIBER''', and the '''user1's account''' is the '''BROKER'''.

  * According to the above analogy, the image that is published is the data, that was '''transferred from user1 to user2''' 📤. And that is the exact scenario in an MQTT Pub/Sub model. * We have a more secure layer 🔒 to make sure the data is shared t'''hrough a specific path, we call th'''at 'topic', When use'''r1''' publishes data on topic, the subscriber automatically receives if already connected to the broker. Hence, t'''he''' LOW latency.connected to the broker. Hence, t'''he''' LOW latency.)
• Home Assistance on Windows  + ('''Home Assistant''' is an open-source hom … '''Home Assistant''' is an open-source home automation platform that acts as the central hub for managing your smart home. Here are some key features: '''Integration with Over 1000 Brands''': Home Assistant plays well with a vast array of devices and services. From smart lights and thermostats to security cameras and voice assistants, it integrates seamlessly. Once you set up your devices, Home Assistant automatically scans your network and allows you to configure them easily. '''Powerful Automation:''' Imagine your home working for you! With Home Assistant’s advanced automation engine, you can create custom rules and triggers.

  Examples:

  Turn on the lights when the sun sets.

  Receive an alert if you accidentally leave the garage door open.

  '''Extendable with Add-Ons''': Home Assistant isn’t limited to its core functionality. You can easily install additional applications (add-ons) to enhance your setup.

  Examples:

  Run AdGuard for DNS-based ad blocking.

  Use NodeRed for third-party automation.

  Turn Home Assistant into a Spotify Connect target.

  '''Local Data Privacy''': Unlike cloud-based solutions, Home Assistant keeps your data local. It communicates directly with your devices without relying on external servers. Your privacy is preserved, and no data is stored in the cloud. '''Companion Mobile Apps''': Control your devices and receive notifications using the official Home Assistant apps. These apps also enable presence detection, allowing you to trigger automation based on your location. Rest assured, your data is sent directly to your home, with no third-party access. '''Installation Options:''' '''Home Assistant OS''': A ready-to-use image for devices like Raspberry Pi, Odroid, or Intel NUC. '''Home Assistant Supervised''': Install Home Assistant on a generic Linux system using Docker. '''Home Assistant Container''': Run Home Assistant in a Docker container. '''Home Assistant Core''': For advanced users who prefer manual installation on Python environments. By setting it up in a virtual machine, you can experiment with Home Assistant without affecting your primary Windows environment. === Prerequisites: === * '''Windows 11''': Ensure you’re running Windows 11 on your host machine. * '''VirtualBox''': Download and install VirtualBox if you haven’t already.re you’re running Windows 11 on your host machine. * '''VirtualBox''': Download and install VirtualBox if you haven’t already.)
• Financial literacy with Makey Makey  + (Important! to avoid problems you need to a … Important! to avoid problems you need to add an end to your code. In this example, when the bucket value will be equal to the price, that will mark the end of the code. We need to add an IF (yellow) and use the Operator (light green) ‘... = ....’ in our case we will add our variables (bucket from Data (orange). our variables (bucket from Data (orange).)
• Chimères  + (Juste avant le collage des aimants, si la … Juste avant le collage des aimants, si la qualité du rendu ne vous convient pas, vous pouvez simplement faire les finitions au cuter en retirant les petits filaments qui resteraient.
  ...Avant toute chose, faites bien attention à coller les aimants dans le bon sens, attention donc aux pôles.
  Mettez un point très léger de colle dans la cavité prévue à cet effet sur la partie corporelle concernée de l'animal. Insérer l'aimant dans la cavité (pas besoin de mettre de colle sur l'aimant) et laisser sécher une minute Répétez l'opération pour chaque cavité, en faisant toujours bien attention à ce que les pôles des aimants s'attirent dans le bon sens
  toujours bien attention à ce que les pôles des aimants s'attirent dans le bon sens <br/>)
• Showerloop - Guide 2: Filters  + (Laser cut or CNC the files in [http://goog … Laser cut or CNC the files in [http://google.com this pdf]. Since laser cutters handle cutting a bit differently there may be come problems with the file. Generally red / hairlines (0.001mm) is for cutting and black is for engraving.
  If you don’t have access to a laser cutter or CNC machine, a manual router can be used to cut out the groove in the filter and the whole shape if need be. To cut a perfect circle with a router a special tool may need to be made (look for circle jig on youtube).
  The lids and mounting plates can also be a single piece if you are using thick material. Four 10cm diameter x 50cm filters are required to have an appropriate flow rate of 10l/min. With 6.6l/min two filters are sufficient and 1 filter for 3.3l/min. The surface area is more important than the length of the filter because that determines the flow rate through the filter and thus reaction times. I use 10mm thick acrylic sheets for the lid and compression disks but I have used 4-5mm acrylic sheets in previous prototypes and glued them together with decent results.d 4-5mm acrylic sheets in previous prototypes and glued them together with decent results.)
• Word Clock  + (Lay the acrylic backing on top of the sten … Lay the acrylic backing on top of the stencil, and mark out a cut line, then using a straight edge and a sharp hobby knife (or scalpel), cut the sheet to size. Next, ensure that your working environment is clean – vacuum your table if necessary – or work inside the house, instead of the garage. Lock up your Golden Retriever dog and your cats. If you get small particles between the vinyl and the Perspex, you will have enormous trouble making the surface look flat. Spend some time 'weeding' the stencil, by removing the letters that you don't want there on the final stencil. The removed letters will provide space for the light to shine through. Once you have removed all of the letters (being careful to leave the centres of letters such as 'A' and 'P' behind), apply some masking tape along each row so that when we remove the backing sheet, the centres of the letters stay in the correct spot on the stencil.s stay in the correct spot on the stencil.)
• Colorado Top Bar Assembly  + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
• Silent Box  + (Lors du brainstorming sur le design, l'équipe s'est accordée sur un objet mobile en axant sur la circularité. L'objectif était d'afficher de manière claire les informations et notamment le seuil de tolérance sonore, tout en conservant un aspect ludique.)
• Brodeuse numérique, Singer Futura XL550  + (Lorsque qu'on ouvre Futura le grand tambour s'affiche, dans notre cas nous voulons le petit, puisque qu'au début du tutoriel je vous ai indiqué de prendre le petit tambour. <br/> * Menu "outils" * "Sélectionner" le tambour * "Petit")
• Thinger io - IoT Platform Series - 9  + (Modern methods of developing, got easier w … Modern methods of developing, got easier with software services. For hardware services, we have limited options. Hence [http://www.pcbway.com/?from=akshayansinha PCBWay] gives the opportunity to get custom PCB manufactured for hobby projects as well as sample pieces, in very less delivery time Get discount on the first order of 10 PCB Boards. Now, [http://www.pcbway.com/?from=akshayansinha PCBWay] also offers end-to-end options for our products including hardware enclosures. So, if you design PCBs, get it printed in a few steps!esign PCBs, get it printed in a few steps!)
• Makers game  + (Nettoyer et poncer les pieds pour enlever les traces de brûlures. Pour poncer, faites des mouvements circulaires dans le sens du bois.)
• Makers game  + (Nettoyer et poncer les pieds pour enlever les traces de brûlures. Pour poncer, faites des mouvements circulaires dans le sens du bois.)
• How to Track the ISS Location with Node-RED  + (Node-RED is a visual programming tool that allows you to create flows of data and logic using nodes. In this article, we will use Node-RED to track the location of the International Space Station (ISS) and display it on a world map.)
• Cheap and Cute Digital PhotoFrame Without SD Card on ESP8266and1-8inch TFT  + (<nowiki>1.8 TFT Panel ST7735 https:/ … 1.8 TFT Panel ST7735 https://www.aliexpress.com/item/32913848470.html
  
  1.8 TFT Panel ST7735 https://www.banggood.com/1_441_82_02_22_42_8-Inch-TFT-LCD-Display-Module-Colorful-Screen-Module-SPI-Interface-p-1494883.html
  
  ESP8266 WEMOS D1 https://www.aliexpress.com/item/33036965281.html
  
  3D Printed Case https://www.thingiverse.com/thing:4097143
  
  Some Wires & Soldering Iron.m/thing:4097143<br /><br />Some Wires & Soldering Iron.</nowiki>)
• Virtual Fence - Anti Theft Device  + (<nowiki>A Fence is a physical bounda … A Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located.
  
  This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''
  
  
  The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.
  
  But before we get started -e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
• Connexion au serveur LoRaWAN  + (<nowiki>'''Préparer ''':<br /> … '''Préparer ''':
  
  Utilisez le logiciel MQTTX pour vous abonner au serveur cible. Voici le serveur chirpstack construit par moi-même. L'IP est 192.168.0.84. Le nom d'utilisateur et le mot de passe sont tous deux admin, qui peuvent être écrits ou non.
  
  Abonnez-vous à TOPIC via le serveur d'applications pour accepter les informations publiées par le serveur de l'appareil.
  
  L'emplacement des informations sur l'appareil est indiqué dans la figure
  
  Grammaire :
  
  // SUJET téléchargé par le serveur de l'appareil
  
  // affiche tout pour l'APPLICATION_ID donné
  
  application/ID_APPLICATION/#
  
  // affiche uniquement les charges utiles de liaison montante pour l'APPLICATION_ID donné
  
  application/APPLICATION_ID/device/+/event/up
  
  // Le serveur d'applications envoie TOPIC
  
  application/APPLICATION_ID/device/DEV_EUI/command/down
  
  Remarque : « # » et « + » sont des caractères génériques dans le protocole MQTT
  
  Wildcard à un seul niveau (Wildcard à un seul niveau) : représenté par le symbole "+". Lorsqu'un niveau dans une rubrique utilise le caractère générique "+", il correspond à n'importe quel nom de niveau. Par exemple, « maison/+ » peut correspondre à des sujets tels que « maison/chambre », « maison/salon », etc., mais pas à plus d'un niveau de sujets tels que « maison/chambre/température ».
  
  Caractère générique multi-niveaux (Multi-level wildcard) : représenté par le symbole "#". Lorsqu'un niveau d'un thème utilise le caractère générique "#", il peut correspondre à n'importe quel nom à plusieurs niveaux. "#" doit être le dernier niveau d'un sujet, qui correspond au niveau actuel ainsi qu'à tous les sujets plus profonds. Par exemple, « maison/# » peut correspondre à « maison/chambre », « maison/salon » et « maison/chambre/température » à n'importe quel niveau de thème.
  
  Informations push sur l'appareil
  
  //Recevoir le SUJET :
  
  //Abonnez-vous au SUJET de téléchargement de données d'un seul appareil
  
  application/ded77c98-1249-44d1-9a14-c4b312f71d77/device/a1b117f518a3ba80/event/up
  
  //Abonnez-vous à tous les appareils sous l'application actuelle
  
  demande/ded77c98-1249-44d1-9a14-c4b312f71d77/#
  
  /* Commande AT pour que le nœud terminal télécharge les données
  
  1 : Besoin de confirmer la trame // 0 n'a pas besoin de confirmer
  
  2 : Le nombre maximum de retransmissions est de 2 fois
  
  10 : le nombre d'octets dans le package actuel
  
  xx:données */
  
  AT+DTRX=1,2,10,3435363738
  
  Les informations reçues par le serveur d'applications sont affichées dans la figure
  
  Le serveur d'applications envoie des informations
  
  //Envoyer le SUJET :
  
  application/ded77c98-1249-44d1-9a14-c4b312f71d77/device/a1b117f518a3ba80/command/down
  
  //Envoyer le format des données
  
  {
  
  "devEui": "a1b117f518a3ba80", #ID du périphérique
  
  "confirmed": true, #Si une confirmation est requise
  
  "fPort": 10, #Port cible de la couche application
  
  "data": "cnVub29i" #data, remarque : nécessité d'utiliser le format d'encodage base64, par exemple : cnVub29i == 72756E6F6F62(runoob)
  
  }
  
  //Le terminal lit les données du tampon de réception et efface le tampon
  
  AT+DRX ?
  
  Les informations reçues par l'appareil sont affichées sur la figure :
  
  '''Avis ''':
  
  Les caractères génériques MQTT ne peuvent être utilisés que lors de l'abonnement, pas lors de l'envoi
  
  '''Site Web d'outils ''' :
  
  ASCII en chaîne
  
  https://www.asciim.cn/m/tools/convert_ascii_to_string.html
  
  cryptage et déchiffrement base64
  
  https://c.runoob.com/front-end/693/
  
  '''Interagissez avec les données du serveur TTN '''
  
  Dans l'article précédent, nous avons principalement expliqué comment enregistrer des passerelles, créer des applications, créer des appareils, etc. sur thethingsnetwork.org. thethingsnetwork.org (ci-après dénommé TTN) n'est qu'un serveur réseau (serveur réseau) et n'enregistrera pas d'application. données. Par conséquent, dans le projet lui-même, un serveur d'applications est également requis. thethingsnetwork.org propose diverses méthodes permettant à la plate-forme d'application d'obtenir des données et de gérer les appareils.
  
  Principalement divisé en 3 catégories :
  
  API : elle est divisée en API de données et API de gestion d'applications. L'API de données utilise principalement MQTT pour recevoir et envoyer des données, et l'API de gestion d'applications utilise principalement HTTP pour gérer les appareils enregistrés.
  
  SDK : Différents langages tels que Go, Java, Node.js sont fournis.
  
  Intégrations : ThingSpeak, AWS IOT, etc.
  
  Dans la plupart des cas, vous n'avez qu'à prêter attention au reporting et à l'envoi de données, donc cet article explique principalement comment utiliser MQTT pour obtenir et envoyer des données, la description officielle https://www.thethingsnetwork.org/docs/applications/mqtt /api.html
  
  Le client MQTT.fx est utilisé ici pour démontrer que d'autres clients MQTT en langage de haut niveau peuvent être utilisés dans des applications pratiques.fournis.<br /><br />Intégrations : ThingSpeak, AWS IOT, etc.<br /><br />Dans la plupart des cas, vous n'avez qu'à prêter attention au reporting et à l'envoi de données, donc cet article explique principalement comment utiliser MQTT pour obtenir et envoyer des données, la description officielle https://www.thethingsnetwork.org/docs/applications/mqtt /api.html<br /><br />Le client MQTT.fx est utilisé ici pour démontrer que d'autres clients MQTT en langage de haut niveau peuvent être utilisés dans des applications pratiques.</nowiki>)
• 6 steps to becoming a better worker  + (Obviously, your superiors didn't get to wh … Obviously, your superiors didn't get to where they are by magic. They were particular events that marked that destiny. They were adequately prepared, and little by little, they grew and became good at what they did. If you are looking for a promotion, start doing everything with desire and dedication, always trying to achieve the best results. Don't be satisfied with little!t results. Don't be satisfied with little!)
• Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
• Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
• Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
• Create a wooden pet that connects with Facebook  + (Once you ve set up an account on adafruit.io, go on creating a new Feed. Create a new feed and name it, for example, “touchsensor”.)
• Design for lasercut with Makercase  + (Open the website [http://www.makercase.com … Open the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
• Design for lasercut with Makercase  + (Open the website [http://www.makercase.com … Open the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
• Tuto "Utilisation de Trotec"  + (Ouvrir le logiciel '''CorelDraw''' qui est … Ouvrir le logiciel '''CorelDraw''' qui est installé sur l’ordinateur à côté de la trotec. *Ouvrir le fichier .pdf *Tout sélectionner et choisir « Ligne très fine » (image 1 - encadré) *Lancer l’impression via icône imprimante : #  Aller dans onglet "Général" cliquer sur "Préférence" (image 2 (1)) #Définir la taille de l'impression à partir de la taille vue sur la page de visualisation (image 1) et ajouter + 2 mm en largeur et hauteur (image 3 (1)) #  Cocher case géométrie interne d’abord (image 3 (2)) #  Disposition : angle supérieur gauche (image 2 onglet "Disposition" (2)) #Imprimer (image 2 (4))
  Tant que la zone d'impression n'est pas définie (image 3), une erreur apparaît image 2 (3)
  Ouvrir le logiciel '''Job Control''' qui est installé sur l’ordinateur à côté de la trotec. *Quand à partir de CorelDraw, l’impression est lancée. JC clignote *Choisir son Job et le positionner au niveau de la croix (1) *Cliquer sur buse (2) pour paramétrer le type de support ainsi que la vitesse et la puissance du laser (3) *Cliquer sur Œil - Votre dessin apparaît. (4) Lancer l'impression (5)ssance du laser (3) *Cliquer sur Œil - Votre dessin apparaît. (4) Lancer l'impression (5))
• Tuto "Utilisation de Trotec"  + (Ouvrir le logiciel '''CorelDraw''' qui est … Ouvrir le logiciel '''CorelDraw''' qui est installé sur l’ordinateur à côté de la trotec. *Ouvrir le fichier .pdf *Tout sélectionner et choisir « Ligne très fine » (image 1 - encadré) *Lancer l’impression via icône imprimante : #  Aller dans onglet "Général" cliquer sur "Préférence" (image 2 (1)) #Définir la taille de l'impression à partir de la taille vue sur la page de visualisation (image 1) et ajouter + 2 mm en largeur et hauteur (image 3 (1)) #  Cocher case géométrie interne d’abord (image 3 (2)) #  Disposition : angle supérieur gauche (image 2 onglet "Disposition" (2)) #Imprimer (image 2 (4))
  Tant que la zone d'impression n'est pas définie (image 3), une erreur apparaît image 2 (3)
  Ouvrir le logiciel '''Job Control''' qui est installé sur l’ordinateur à côté de la trotec. *Quand à partir de CorelDraw, l’impression est lancée. JC clignote *Choisir son Job et le positionner au niveau de la croix (1) *Cliquer sur buse (2) pour paramétrer le type de support ainsi que la vitesse et la puissance du laser (3) *Cliquer sur Œil - Votre dessin apparaît. (4) Lancer l'impression (5)ssance du laser (3) *Cliquer sur Œil - Votre dessin apparaît. (4) Lancer l'impression (5))
• Maquette de cartographie du Quartier Villejean Rennes  + ( * 1 Panneau contreplaqué okoumé Ép.5 mm 1m x 0,61m * 1 Panneau médium (mdf) naturel, Ép.3 mm 1m x 0,61m * 1 ordinateur avec logiciel Adobe Illustrator ou Inkscape. * Découpeuse laser * Colle pour le bois )
• People pedal powered computer charger  + (People pedal power is a form of renewable … People pedal power is a form of renewable energy. One human can produce around 75W electric power sustained for about 15min, or 50W during a longer period. This is enough power to be able to charge an average laptop. This energy can be harvested on a PPP device. To find out more about People Pedal Power, visit our site https://ciklic.wordpress.com/2017/08/05/renewable-energy-what-can-you-expect/8/05/renewable-energy-what-can-you-expect/)
• SunZilla - Guide 4: Solar box  + (To physically anchor the the boxes togethe … To physically anchor the the boxes together, the joins need to be added. The joins hold the boxes in place on a wooden foot structure. This structure can be CNC-milled with the provided .DMX source file, which you can download below. You can also old-school wood-craft them, following the .PDF technical drawing, also downloadable below. After milling the foot structure, put the boxes in their places and drill 4 holes through the outside bottom rim of each box and the underlying wooden structure. Using these holes, the different parts are connected by a bent bicycle spoke. The shape of the spoke can be seen in the following figure. The shape of the spoke can be seen in the following figure bellow. The height of the “mouth” of the bent spoke depends on the thickness of the wooden foot (see diagram). It should 2-4 mm less than the added thickness of the box and the wooden foot. To bend the spoke, start from one side of the spoke and do one bending after the other by holding the spoke with pliers and bending then the longer end of the spoke with your hand in the shape you like.poke with your hand in the shape you like.)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• Turn signal biking jacket  + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
• How to Merge Audio and Video into One  + (Please download, install, and open the [ht … Please download, install, and open the [https://www.joyoshare.com/video-joiner/ video joiner] on your computer. Find "Open File" button at bottom left of its main interface to browse and upload the video to be merged with an audio. Also, you can directly drag and drop.dio. Also, you can directly drag and drop.)
• Voiture télecommandée en bluetooth par son smartphone  + (La plupart de nos designs sont des prototy … La plupart de nos designs sont des prototypes. Dessinés sous Inkscape pour être découpés à la laser principalement, ils devaient pouvoir recevoir les différents éléments pour être facilement câblés par la suite. Pensez à mettre les connecteurs d'alimentation orientés vers l'extérieur pour ne pas être géné par la suite. Quelques soudures sur les fils moteurs et les pins du driver pour les maintenir. Par souci de gain de place, l'alimentation a été fixé sous les châssis. Une roue libre fixée à l'avant permet un contrôle droite ou gauche en bloquant un moteur du côté opposé. Suivre les schémas de câblage, en accord avec votre code Arduino pour les numéros de pins et voilà ! A noter que le 3.3V en sortie de l'arduino est suffisant pour alimenter notre HC05.o est suffisant pour alimenter notre HC05.)
• Voiture télecommandée en bluetooth par son smartphone  + (La plupart de nos designs sont des prototy … La plupart de nos designs sont des prototypes. Dessinés sous Inkscape pour être découpés à la laser principalement, ils devaient pouvoir recevoir les différents éléments pour être facilement câblés par la suite. Pensez à mettre les connecteurs d'alimentation orientés vers l'extérieur pour ne pas être géné par la suite. Quelques soudures sur les fils moteurs et les pins du driver pour les maintenir. Par souci de gain de place, l'alimentation a été fixé sous les châssis. Une roue libre fixée à l'avant permet un contrôle droite ou gauche en bloquant un moteur du côté opposé. Suivre les schémas de câblage, en accord avec votre code Arduino pour les numéros de pins et voilà ! A noter que le 3.3V en sortie de l'arduino est suffisant pour alimenter notre HC05.o est suffisant pour alimenter notre HC05.)
• Puzzle en bois  + (Pour assembler vos images, vous allez comm … Pour assembler vos images, vous allez commencer par installer [https://inkscape.org/fr/ Inkscape] : il s’agit d’un logiciel libre avec lequel nous allons créer le dessin et créer le puzzle. Je n’expliquerai pas son fonctionnement en détails ici. De nombreux tutoriels existent [https://inkscape.org/fr/doc/tutorials/basic/tutorial-basic.fr.html à cette adresse par exemple] pour maîtriser la bête. Voici les étapes succinctes qui m’ont permises de créer ces chefs d’oeuvre ;-) : # Dans Inkscape, créez une zone de travail de la taille de votre puzzle. # Importez chacune de vos images (Fichier > Importer) # Vectorisez chaque image en noir et banc (Les paramètres que j’ai choisi : Passe simple en cochant les cases “adoucir”, “Empiler les passes”, “Retirer l’arrière-plan”). # Redimensionnez les images vectorisées si nécessaire et ordonnez les images dans les différents plans (premier plan, plans intermédiaires, dernier plan)
  {{{1}}}
  Si vous voulez limiter la difficulté de résolution du puzzle, notamment s’il se destine à un enfant, évitez les zone vides dans votre motif. Ajouter un arrière-plan légèrement gravé  permet de pallier ce soucis.
  À noter aussi que beaucoup de dessins sur Internet sont positifs, c’est à dire que leurs contours sont noirs et leurs fonds blanc. Tels quels, vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.
  , vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.</div> </div>)
• Puzzle en bois  + (Pour assembler vos images, vous allez comm … Pour assembler vos images, vous allez commencer par installer [https://inkscape.org/fr/ Inkscape] : il s’agit d’un logiciel libre avec lequel nous allons créer le dessin et créer le puzzle. Je n’expliquerai pas son fonctionnement en détails ici. De nombreux tutoriels existent [https://inkscape.org/fr/doc/tutorials/basic/tutorial-basic.fr.html à cette adresse par exemple] pour maîtriser la bête. Voici les étapes succinctes qui m’ont permises de créer ces chefs d’oeuvre ;-) : # Dans Inkscape, créez une zone de travail de la taille de votre puzzle. # Importez chacune de vos images (Fichier > Importer) # Vectorisez chaque image en noir et banc (Les paramètres que j’ai choisi : Passe simple en cochant les cases “adoucir”, “Empiler les passes”, “Retirer l’arrière-plan”). # Redimensionnez les images vectorisées si nécessaire et ordonnez les images dans les différents plans (premier plan, plans intermédiaires, dernier plan)
  {{{1}}}
  Si vous voulez limiter la difficulté de résolution du puzzle, notamment s’il se destine à un enfant, évitez les zone vides dans votre motif. Ajouter un arrière-plan légèrement gravé  permet de pallier ce soucis.
  À noter aussi que beaucoup de dessins sur Internet sont positifs, c’est à dire que leurs contours sont noirs et leurs fonds blanc. Tels quels, vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.
  , vous pourriez être décu(e) de n’avoir que peu de zones gravées sur vos puzzles. Pour contrer ce pépin, vous pouvez inverser les couleurs lors de la vectorisation.</div> </div>)
• Multistation Météo Qualité de l'air  + (Pour la base du projet, des plans de bento … Pour la base du projet, des plans de bentos déjà préparés nous ont été remis lors de la formation ainsi que les pièces nécessaires pour la partie station météo. En restant sur le même type de conception j'ai modelisé une boite à encoche à l'aide de l'extension "lasercut box" du logiciel Inkscape. Tous les plans nécessaires à cette réalisation se trouvent en pièces jointes.éalisation se trouvent en pièces jointes.)
• Le Cerveau - Arduino capacitif  + (Pour transformer l'Arduino en capteur capa … Pour transformer l'Arduino en capteur capacitif, il faut tout d'abord installer la bibliothèque de détection capacitive [https://github.com/PaulStoffregen/CapacitiveSensor CapacitiveSensor] depuis le logiciel Arduino. Extraire les fichiers dans Documents/Arduino/libraries puis redémarrer l'Arduino. Pour le contrôle du moteur pas à pas, il est également possible de télécharger une librairie mais on économise de la mémoire en restant simple.conomise de la mémoire en restant simple.)
• Jeu de dames et d'échecs  + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau)
  Dans l'ordre découpe intérieure puis extérieure = RVB (Oui on avait fait l'inverse avant de se poser les bonnes questions et de changer...)
  '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)'''''
  Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !
  ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
• Jeu de dames et d'échecs  + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau)
  Dans l'ordre découpe intérieure puis extérieure = RVB (Oui on avait fait l'inverse avant de se poser les bonnes questions et de changer...)
  '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)'''''
  Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !
  ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
• WGU Cybersecurity-Architecture-and-Engineering Exam  + (Preparing for the '''WGU Cybersecurity-Arc … Preparing for the '''WGU Cybersecurity-Architecture-and-Engineering Exam''' requires dedication and the right resources. '''RealBraindumps.com''' offers a complete suite of materials, including '''WGU Cybersecurity-Architecture-and-Engineering Exam Dumps''', '''Exam Questions''', '''Practice Tests''', and '''Study Material''', all designed to help you succeed. By following a structured study plan and making the most of these resources, you can approach the exam with confidence and achieve the certification that will propel your career forward.tion that will propel your career forward.)
• Image JPG en Dxf pour Découpe Laser  + (En principe tout fichier au format JPEG co … En principe tout fichier au format JPEG convient. Mais je vous conseil de choisir une image déjà contrastée et dont les contours des différente zones constituant l'image sont nettes. * une de vos photo personnelle, * je vais souvent sur des banques d'images, par exemple : Pinterest, Unsplash * Penser à vérifier que les images sont libre de droit !ifier que les images sont libre de droit !)
• Image JPG en Dxf pour Découpe Laser  + (En principe tout fichier au format JPEG co … En principe tout fichier au format JPEG convient. Mais je vous conseil de choisir une image déjà contrastée et dont les contours des différente zones constituant l'image sont nettes. * une de vos photo personnelle, * je vais souvent sur des banques d'images, par exemple : Pinterest, Unsplash * Penser à vérifier que les images sont libre de droit !ifier que les images sont libre de droit !)
• Thermomètre infrarouge microbit  + (Rendez vous sur ce lien : https://makecod … Rendez vous sur ce lien : https://makecode.microbit.org/_Up33c2V57WXt *assurez-vous que votre microbit est connecté à votre ordinateur par un câble micro-USB. *vous devriez constater que le microbit est utilisé par votre ordinateur comme une clé USB *cliquez sur le bouton "Download" de MakeCode, un fichier .hex sera téléchargé. Glissez et déposez le fichier .hex sur le lecteur (ou copiez et collez le). *Pendant la transmission, le voyant orange au dos de la carte micro:bit se met à clignoter. Une fois quele clignottement s'arrête, le transfert est terminé. Voilà, maintenant nous pouvons voir si le microbite fonctionne comme nous l'espérons.
  e fonctionne comme nous l'espérons. <br/>)
• Du pixelart sur vos écrans OLED  + (Sauvegarder votre image au format XBM < … Sauvegarder votre image au format XBM
  Sauvegarder le aussi au format PNG, vous ne pourrez pas modifier votre fichier XBM avec Krita !
  Ouvrez le fichier XBM avec un éditeur de texte et changez le nom des variables Fichier XBM #define _width 128 #define _height 32 static char _bits[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... }; Fichier logo.h #define logo_width 128 #define logo_height 32 static const unsigned char logo[] U8X8_PROGMEM = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... };EM = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... };)
• Du pixelart sur vos écrans OLED  + (Sauvegarder votre image au format XBM < … Sauvegarder votre image au format XBM
  Sauvegarder le aussi au format PNG, vous ne pourrez pas modifier votre fichier XBM avec Krita !
  Ouvrez le fichier XBM avec un éditeur de texte et changez le nom des variables Fichier XBM #define _width 128 #define _height 32 static char _bits[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... }; Fichier logo.h #define logo_width 128 #define logo_height 32 static const unsigned char logo[] U8X8_PROGMEM = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... };EM = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00... };)
• 3D CNC milling avec CAM Fusion 360  + (<section class="step"><br />Be …
  
  Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.
  
  
  3D Toolpathing
  
  If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.
  
  When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.
  
  
  Workholding
  
  Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.
  
  When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.
  
  But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.
  
  In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.
  
  Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.
  
  For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.
  
  
  Registration
  
  Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.
  
  If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.
  
  This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:
  
  --Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed
  
  --Machining a contour into your spoiler board, then placing your stock exactly inside that contour
  
  --Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)
  
  This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.
  
  
  CAM Settings
  
  The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths.

  
  
-Tool numbering
  
  If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.
  
  Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.
  
  If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.
  
  -Rules for roughing
  
  Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.
  
  When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.
  
  lt;br />Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.<br /><br />When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter.<br /></section>)
• Mighty maker level belt  + (Set up a temporary circuit using a bread b … Set up a temporary circuit using a bread board and solderless jumper cables. Set up your circuit as shown in the diagram Things to note: - There is a transistor for each of the Red, Blue and Green inputs of the RGB strip - Each transistor has 3 pins, one for GROUND, one for SIGNAL INPUT and one for SIGNAL OUTPUT - The signal input pin of each transistor is connected to a pin on the Arduino which will be controlled by the Arduino code - this will tell it whether this colour should illuminate or not. - The signal output pin of each transistor is connected to the corresponding connection on the RGB strip. - The Vin pin from the Arduino is connected to the 12V+ connection point on the RGB strip. This means that the power source is coming the computer when it is connected rather than a battery.hen it is connected rather than a battery.)
• Conductive paint + Makey Makey  + (Simply mix the glue with the graphite powd … Simply mix the glue with the graphite powder in equal parts. You can add more glue than graphite powder if you believe you don’t have enough powder. When done, add water as needed to reach the desired consistency. Your mixture needs to have roughly the same consistency as real paint. Watch [https://www.youtube.com/watch?v=phEke_LZJlk this] video for extra help.?v=phEke_LZJlk this] video for extra help.)
• Word Clock  + (Start assembly by making the stencil. You … Start assembly by making the stencil. You can either get a stencil cut by a local sign writer to your own design, or use a pre-cut vinyl stencil from my web site. I have always felt that the clock looks more majestic if there is a border around the letters (I normally use about a 30mm border), but you can use whatever size you would like. Vinyl by itself is floppy, so it needs to be attached to a clear acrylic (Perspex) backing sheet to provide rigidity. Make sure that the acrylic sheet is the size you want the final clock to be.
  Before you start, mix up a couple of drops of dish washing liquid with a cup of water, and load that into a spray bottle. We will use this to make applying the vinyl lots easier.
  The vinyl stencil as supplied will typically be larger than required. This is so as to provide extra material for variations in face sizes. We need to cut the vinyl stencil to the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.o the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.)