Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.
Liste de résultats
- Word Clock + (Start assembly by making the stencil. You … Start assembly by making the stencil. You can either get a stencil cut by a local sign writer to your own design, or use a pre-cut vinyl stencil from my web site. I have always felt that the clock looks more majestic if there is a border around the letters (I normally use about a 30mm border), but you can use whatever size you would like. Vinyl by itself is floppy, so it needs to be attached to a clear acrylic (Perspex) backing sheet to provide rigidity. Make sure that the acrylic sheet is the size you want the final clock to be. The vinyl stencil as supplied will typically be larger than required. This is so as to provide extra material for variations in face sizes. We need to cut the vinyl stencil to the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.o the final size of your acrylic sheet, allowing an extra 10mm allowance around the edges.)
- Word Clock + (Lay the acrylic backing on top of the sten … Lay the acrylic backing on top of the stencil, and mark out a cut line, then using a straight edge and a sharp hobby knife (or scalpel), cut the sheet to size. Next, ensure that your working environment is clean – vacuum your table if necessary – or work inside the house, instead of the garage. Lock up your Golden Retriever dog and your cats. If you get small particles between the vinyl and the Perspex, you will have enormous trouble making the surface look flat. Spend some time 'weeding' the stencil, by removing the letters that you don't want there on the final stencil. The removed letters will provide space for the light to shine through. Once you have removed all of the letters (being careful to leave the centres of letters such as 'A' and 'P' behind), apply some masking tape along each row so that when we remove the backing sheet, the centres of the letters stay in the correct spot on the stencil.s stay in the correct spot on the stencil.)
- What is Gua Sha Therapy + (The skin on our necks can be very delicate … The skin on our necks can be very delicate, but it’s also easily hung up on the way through life. These sensitive areas become even more noticeable as we age. Triggered by stress or prolonged sun exposure, they can lead to redness, lines, and discoloration. Gua sha is one of the most effective ways to treat these unwanted signs of aging. This basic gua sha technique focuses on the neck. Gently apply pressure to the areas indicated using your fingertips or a depilatory scraper or spoon—try a nice wooden one you find in the kitchen! Go back and forth over one area at a time until desired results are achieved. Add our [https://www.sayheybeauty.com/products/jade-face-massage-roller-gua-sha-neck-massage Gua Sha Neck Massage] set to your skincare routine for smoother, younger looking skin.outine for smoother, younger looking skin.)
- Make Collaborative Playlists on Spotify + (Step 1. In the left panel, right-click a playlist you wish to open. Step 2. Select 'Collaborative Playlist'. Step 3. Right-click on the playlist again, then scroll down to 'Share'. Step 4. Choose 'Copy Playlist Link' then send it to your friends.)
- Refreshing Oxalis Kvas + (Step 3: Boil then some water and pour it into the pot with herbs.)
- How to create a 3D sculpture + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
- How to create a 3D sculpture + (Steps: # Download an install [https://apps … Steps: # Download an install [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363&os=Win64&appLang=en Slicer for Fusion 360]. # We prepared a smaller and easier to process 3d model. Import the [https://drive.google.com/open?id=1uPw3ygtbECCSpNSOifi8TfQXnzldtmON Einstein simplified model] or: ## Download the 3D model [https://www.thingiverse.com/thing:631037 Einstein bust from Thingiverse] . Just the file “EinsteinBustTongue.stl” is needed. The file is quite big, it will probably need a powerful computer ## Import the 3d model EinsteinBustTongue.stl in Slicer # Set the units to mm # Set the desired size for the model. We suggest minimum 10cm height # Choose the desired sheet format in Manufacturing Settings # Choose the Construction Technique Stacked slices # In manufacturing settings click on the small gear icon in order to see the advanced options at the bottom of the screen: # Set the material thickness to the one you wish to use. Slot offset is usually 0.010 for most laser cutters. # Set the dowels, choose “cross”: setting two dowels makes the puzzle easier, as the slices will be unable to rotate and their orientation will be defined by the dowels.d their orientation will be defined by the dowels.)
- Billethon + (Faire les trous à la perceuse à la taille … Faire les trous à la perceuse à la taille des servomoteurs. Découper des lamelles de carton pour les coller sur les traits du circuit fait au préalable. Matériaux: -Lamelle de carton pour les mûrs -Planche -Règle/équerre -Pistolet à colle -Ciseaux -Planche -Règle/équerre -Pistolet à colle -Ciseaux)
- Arbre multimédia + (Vous trouverez ici l'image que nous utilisons sur nos cartes SD : Mais voici les sources pour installer vous même la distribution linux sur votre raspberry)
- SunZilla - Guide 4: Solar box + (To physically anchor the the boxes togethe … To physically anchor the the boxes together, the joins need to be added. The joins hold the boxes in place on a wooden foot structure. This structure can be CNC-milled with the provided .DMX source file, which you can download below. You can also old-school wood-craft them, following the .PDF technical drawing, also downloadable below. After milling the foot structure, put the boxes in their places and drill 4 holes through the outside bottom rim of each box and the underlying wooden structure. Using these holes, the different parts are connected by a bent bicycle spoke. The shape of the spoke can be seen in the following figure. The shape of the spoke can be seen in the following figure bellow. The height of the “mouth” of the bent spoke depends on the thickness of the wooden foot (see diagram). It should 2-4 mm less than the added thickness of the box and the wooden foot. To bend the spoke, start from one side of the spoke and do one bending after the other by holding the spoke with pliers and bending then the longer end of the spoke with your hand in the shape you like.poke with your hand in the shape you like.)
- E-waste lights + (The Android app is linked to the smart bin … The Android app is linked to the smart bin using WIFI or Bluetooth. It collects waste data, contains fun facts to educate people about recycling and waste sorting. To motivate people to keep on sorting their waste, the app also shows you how much money you have accumulated.s you how much money you have accumulated.)
- EMI probe 12+ activities + (The EMI detector comes in two forms: the g … The EMI detector comes in two forms: the gadget is mounted on a shield suitable for an arduino uno board, or the detector is embedded on a shield on which an arduino nano is mounted. We will start by building the shield for arduino uno here s the wiring diagram for the EMI detector == Step by step instructions for the Arduino Uno shield == First, solder at least a couple of pins to the PCB. These will go into GND and Analog 5 in th arduino uno board. Next, solder an extra pin on the opposite side of the PCB. This will connect to Digital 9 on the arduino board. The speaker will also be soldered onto the PCB. Solder the positive end of the speaker to the pin which goes into analog 9 on the arduino. Solder the negative end of the speaker into the PCB. Then connect a short (5 cm max) piece of electric wire to the negative end of the speaker. The other end of the cable is soldered on the pin which goes into GND. Use a 1Mohm resistor to connect the pin which goes into GND and the one that goes into Analog 5 on the PCB (see photo above). It’s now time to add the antenna of your EMI detector. Take about 20 cm of solid core wire, and solder one end of it on to the PCB, precisely to the pin that goes into Analog 5 on the board. = Step by step instructions for the Arduino Nano shield = An timelapse is available here Solder two strips of female headers onto a PCB (3cm x 7cm) You will need to be able to arrange the arduino nano onto these strips of female headers. Solder the positive side of the speaker to the PCB, in correspondence with the D3 pin. Solder the other end of the speaker onto the PCB, in correspondence with GND pin of the arduino nano. Next, grab the 1Mohm resistor, and solder one end to the PCB pin which leads to A5 on the board, the other end to the PCB pin which goes into GND. To make the antenna of your device, take a piece of solid core wire (about 15 cm long), and solder one end of it to the PCB pin which leads to GND on the arduino nano. Finally, grap two short pieces of electric wire. You will use them to connect a 9V battery to the arduino nano and power the board. Solder one end of the first cable to VIN on the arduino nano, solder one end of the other cable to GND. solder one end of the other cable to GND.)
- PiKon telescope + (The PiKon telescope is a robust design but … The PiKon telescope is a robust design but there are two issues that need care if you are to get the most out of your project. '''Dust and the Camera Sensor''' PiKon benefits from a very simple design that has just one optical component. The lens of the Raspberry Pi Camera is removed to allow imaging by the Optical Mirror. This means that the Raspberry Pi Camera sensor is exposed to dust and dirt. Adding sensor protection would add two optical surfaces to the design, so the sensor is left exposed. This is not a problem provided care is taken to avoid dust and dirt getting on the sensor. '''Care of the Mirror''' As with all reflecting telescopes, care must be taken to avoid damaging the mirror. When assembling or modifying the telescope be careful not to let components drop down the Telescope Tube onto the Mirror.p down the Telescope Tube onto the Mirror.)
- Seeed MR60BHA1 Presence, Breathing, and Heartbeat Sensing + (The [https://www.seeedstudio.com/60GHz-mmW … The [https://www.seeedstudio.com/60GHz-mmWave-Radar-Sensor-Breathing-and-Heartbeat-Module-p-5305.html?queryID=504dcf6317754ee7930d15192a311c71&objectID=5305&indexName=bazaar_retailer_products MR60BHA1] 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuous Wave (FMCW) detection to accurately measure breathing rate and heart rate, ensuring a completely private and secure environment, free from external interference. Equipped with a built-in standard algorithm and onboard antenna, the unit delivers simultaneous signal output with exceptional precision. It serves as an ideal solution for developing high-accuracy, self-regulating, privacy-protected, and secure biotic radar systems in consumer electronics, healthcare, and industrial applications. Block Diagram Beyond heart rate and respiration detection, the radar sensor can detect human presence in the operating area, enabling the creation of an automated device and appliance control system that conserves energy during unoccupied periods. Additionally, the system incorporates an IR temperature sensor to measure body temperature, allowing for illness and stress detection. Upon detecting significant vital variations, the buzzer activates as an alert. Simultaneously, all details are displayed on an LCD display and a mobile phone app via the ESP32 Wi-Fi module. The project involved various components, which can be identified in the Below provided image.ich can be identified in the Below provided image.)
- Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
- Hands up Ready Go Scratch tutorial + (First of all, click on the small cat pictu … First of all, click on the small cat picture called “Sprite”. Pick a ‘starting block’ in the Event section (in brown). The green flag block is the most common. Next, pick one “if then” block for each team (you can find this in the Control -yellow- section). Choose a key for each “if then” block and connect it via the alligator clip to the Makey makey. It’s now time to discover a new type of blocks under the section “Looks”. We will start by using ‘switch backdrop to …’, we need one for the beginning of the code to set the background to the initial position (multicolor one), and one per each “IF THEN” block.or one), and one per each “IF THEN” block.)
- Escooterfix - Remove the bottom plate, battery protection Xiaomi electric scooter + (The battery cover is secured with '''twent … The battery cover is secured with '''twenty-one torx 10''' bolts. Removing them by hand can take a while but with a quality driver bit you can use a low-torque electric screwdriver to help. The bolts on the leading edge of the deck may be burred up depending how aggressively the scooter has been ridden over kerbs or rocks.ooter has been ridden over kerbs or rocks.)
- Buzzing Bee Circuit + (The battery holder can be found on TinkerC … The battery holder can be found on TinkerCAD as 'Battery Holder - Buzzing Bee' at the link
This CAD will need to be saved as a .stl file
Open the .stl file in the printer software for your printer
After centring and adjusting the settings as needed, slice the print and transfer the new created file to the printer. PRINT!
created file to the printer. PRINT! <br/>) - How to Make Amazon Music Louder + (The first and most straightforward way to … The first and most straightforward way to make Amazon Music louder is by adjusting the volume settings on your device. Whether you're using a smartphone, tablet, or computer, there should be dedicated volume controls that allow you to increase the sound output. Simply locate the volume buttons or slider and turn them up to your desired level. Keep in mind that you can also adjust the volume within the Amazon Music app itself for finer control.Amazon Music app itself for finer control.)
- DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
- DIY Custom NeoPixel Rings From Scratch! + (The next step in making your printed circu … The next step in making your printed circuit board is making your connections between your LEDs. NeoPixels each have one data-input pad and one data-output pad. First create a long chain starting with the pixel closest to where you plan on placing your interface pins, going from one pixel's data-out pin to the next pixel's data-in pin. After that you'll need to route power and ground. The easiest method I have come up with to do this is to use a combination of circles and semi-circles, four in total, alternating between power and ground as you move outward from the origin. This makes it easy to create a small "jumper" connection as apposed to manually wiring every since LED together, twice. The two pairs of circles/semi-circles can then be tied together whichever way is most convenient. Finally, a copper pour is added. This essentially just causes all extra space to be filled by "ground", which has multiple advantages including being easier to manufacture at home. You will also want to install one roughly .1uf capacitor between power and ground between each set of two LEDs. The manufacture recommends one per LED however its likely one per two will do and they are time consuming to solder. These are not necessary for the functionality of the device, they simply improve the lifespan of the LEDs, so they can be ignored if needed.he LEDs, so they can be ignored if needed.)
- Colorado Top Bar Assembly + (1. Lay the Back Legs flat on the floor and then place the two side panels into the corresponding slots. 2. Place the front legs into place)
- DIY Makey Makey with Arduino Leonardo + (The image below shows the wiring that is needed for one key of your makey-makey-like device. In order to obtain 6 functional keys, you will need to repeat this wiring 6 times overall, each time using a different analog pin on your arduino leonardo.)
- OpenKnit: digital fabrication tool to create your own clothes + (You'll need to thread: two 20x20x800 mm bars: 6 mm tool on both sides. two 30x30x800 mm bars: 8 mm tool on both sides. two 30x30x162 mm bars: 8 mm tool on ONE side, plus one 8 mm hole on the top (see image).)
- Replace LED Lights for Free Via Victoria Government Program + (The process starts as soon as you make a request for a replacement under VEU program. You can contact replacement provider like Ecofin Solutions to address your enquiry.)
- Ultimate Guide to Fix Tidal Not Playing Songs + (The tidal app for music streaming is now a … The tidal app for music streaming is now available on Windows, iOS, and Android devices. You can get its app from its official website or from app stores. Well, some people have complained that they keep meeting issue of Tidal songs not playing and it is said the versions downloaded from '''Microsoft Store''' performs much better. You can take the below instructions as references. 1# Search for '''Microsoft Store''' from your '''Quick Start menu''' to launch the Microsoft Store on your computer. 2# Type in '''Tidal''' in the search bar and find the Tidal app in the appearing results. 3# In the detail page, tap '''Get''' to install the Tidal desktop on your computer.nstall the Tidal desktop on your computer.)
- How to Play Spotify on Yoto Player + (There is a companion Yoto app available on … There is a companion Yoto app available on mobile phones that can help us to upload our audio files including compatible Spotify downloads to Yoto cards for offline listening for free. As we know, Spotify songs are protected in a special OGG Vorbis format. In this case, you'd better download Spotify to MP3, AAC, and M4A files that are supported by Yoto. And [https://www.audfun.com/spotify-music-converter.html AudFun Spotify Music Converter] is a great shot. The '''AudFun Music Converter for Spotify''' is dedicated to downloading and converting Spotify songs, albums, playlists, audiobooks, and [https://www.audfun.com/spotify/download-spotify-podcasts-to-mp3.html Spotify podcasts to MP3], AAC, WAV, FLAC, M4A, and M4B '''without Spotify Premium'''. Also, it retains 100% original audio quality and full ID3 tags, which enables you to play Spotify music on Yoto Mini Player or Yoto Original Player without any metadata info loss.nal Player without any metadata info loss.)
- FabCat House + (Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.)
- FabCat House + (Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.)
- Grown your own fabric with bacteria + (This first step lasts about 1h.)
- How to Make Your Own Easter Egg + (This is one of the best bis of crafting yo … This is one of the best bis of crafting your Easter egg! Make sure that you have invested in some high quality and luxurious cooking chocolate before beginning! Pour some water into a pan and bring to the boil. Meanwhile, make sure that your chocolate is cut up into small chunks ready to melt. Once the water is boiling, balance a ceramic bowl on top of the pan and add your chocolate chunks to it. Keep stirring the chocolate as it melts. Yum!p stirring the chocolate as it melts. Yum!)
- Egypt - Shandaweel Village Water Filter - Sanivation Team + (This is the 1st part of the water filter, with a screw locking water filter that attaches to the water funnel)
- E-Textile Monster + (This is where you need to decide what shap … This is where you need to decide what shape you want your monster to be and what components it will include. You need to make sure there is room for each of your components and the battery pack as well as decide where you want to squeeze the monster for the components to turn on. TIP: do not make your monster too big making your circuit components too spread out! Otherwise you will spend a long time sewing to connect the components together sewing to connect the components together)
- 8bits & Chocolate - decorative candy dispenser + (For the modules assembly I suggest that you refer to the PDF files. You'll find the pieces numbering and how to assemle them (with a few additional hints))
- Design a 3D object in Tinkercad + (This video takes the educator through the … This video takes the educator through the basics of Tinkercad. You will learn about designing simple solids (ex. cubes, tetrahedrons), and combining them together to produce a complex object https://openclassrooms.com/courses/imprimante-3d/modelisez-un-objet-en-3d#/id/video_Player_0/modelisez-un-objet-en-3d#/id/video_Player_0</u>)
- How to Listen to Tidal on Multiple Devices Simultaneously + (Tidal offers several major plans for you t … Tidal offers several major plans for you to choose from, including Free, Hi-Fi, Hi-Fi Plus, Family Hi-Fi, and Family Hi-Fi Plus. Since the Family Plan supports family members with up to '''6''' people, obviously, this is the simplest way. You’re supposed to sign up for the [https://tidal.com/plans/family Tidal Family plan] to enjoy the playback on multiple devices. Currently, the Tidal Family Hi-Fi plan is '''$14.99''' per month with unlimited skips and is ad-free. If you want to enjoy high-resolution quality, you can subscribe to Tidal Family Hi-Fi Plus to get the high lossless quality which is almost equal to CD at '''$29.99''' per month.
# If you’re a new user, you’re able to enjoy the Family plans for free in '''30''' days.
# If you’re not a new user, you can choose to change or '''upgrade''' your plan to Tidal Family Hi-Fi or Hi-Fi Plus.
# To upgrade to or manage a Family plan, go to [http://account.tidal.com/ account.tidal.com] and sign in using the primary account holder’s credentials and select TIDAL Family.
# After then, you will be given the option to select '''Upgrade to Family Plan''' from Family Hi-Fi or Hi-Fi Plus.
'' from Family Hi-Fi or Hi-Fi Plus. <br/>) - Snap circuits activities for 12+ + (To begin with, kids will need to build or … To begin with, kids will need to build or assemble a miniature house. They can build one using cardboard, or you can laser cut them in advance, using for example a 3mm thick MDF board. [https://drive.google.com/open?id=1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY Here]’s the design of a miniature house, ready for laser cut. the design of a miniature house, ready for laser cut.)
- Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
- Showerloop - Guide 4: Make the backplate + (To fit inside the existing frame I had to bevel my 20mm plywood to half way. By clamping a straight piece of material onto the edge I could simply push against it with the router while moving laterally to get a clean and straight cut.)
- Timelapes with Raspberry Pi Camera + (To install the camera use the ribbon cable and press the side of the connector and pull up.)
- SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step). a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
- SunZilla - Guide 2: Inverter and battery boxes + (To make sure that the inverter can't move … To make sure that the inverter can't move around inside the inverter boxes, an inner mounting structure is required. The inverter attaches to the mounting structure, fixing it in place. The mounting structure is fabricated using laser cut wood structures. The .DXF source files for the laser cutting can be downloaded below. When using the files with the laser cutter, refer to the laser cutter tutorial. The inverter and its mounting structure fit inside one of the 1/8 EURO norm boxes, which have external dimensions of 230mm (H) x 400mm (L) x 300mm (W), and usable internal dimensions of 208mm (H) x 370mm (L) x 270mm (W). One piece of plywood measuring 800mm (L) x 600mm (W) x 10mm (th) is sufficient to laser cut parts for both the inverter and battery boxes' internal structures (see next step). a jigsaw and wood drills. Therefore, the .PDF technical drawings of the structures can also be downloaded below.</div> </div>)
- How to Make Beautiful but Easy Handmade Valentine's Day Card + (To make this beautiful card I used half-in … To make this beautiful card I used half-inch ribbon to make roses. I fold it like a triangle shape then twist it two or three times to make the center. Then our next step is to start twisting but you still have to roll the ribbon, then you have to do it every so often when you're going to twist the ribbon.ten when you're going to twist the ribbon.)
- Réalisation d'un photophore en bois + (Tout d'abord, il faut téléchager les plans … Tout d'abord, il faut téléchager les plans des façades en bois (elles sont au nombre de 4) et des socles (ils sont 2 + 4 petits éléments de soutiens). Découpez ces pièces à l'aide d'une découpe laser. Comme un document word que l'on imprimerait, les plans dans les logiciels de design sont envoyées vers la découpe laser pour permettre la réalisation des différents éléments qui amèneront à la concrétisation finale de l'objet.ont à la concrétisation finale de l'objet.)
- Frigo Game Boy + (On va enfin pouvoir jouer avec la nourriture !)
- Frigo Game Boy + (On va enfin pouvoir jouer avec la nourriture !)
- Dôme Géodésique Fréquence 2 paramétrable + (Quel que soit le diamètre d’un dôme de fréquence 2, les angles des montants sont toujours identiques : 16 et 18 degrés respectivement pour les types A et B.)
- Dôme Géodésique Fréquence 2 paramétrable + (Un dôme géodésique est une structure aux m … Un dôme géodésique est une structure aux multiples propriétés très intéressantes : outre l’aspect esthétique original, ce type de structure offre une excellente résistance aux intempéries et une résistance mécanique élevée. Elle est composée de montants (en bois, métal, PVC...) reliés entre eux par des connecteurs. Lors de la conception d’un dôme : plusieurs facteurs sont à prendre en compte : *Le diamètre : Plus il est élevé, plus la construction du dôme sera complexe et plus la hauteur sous plafond du dôme sera importante (hauteur sous plafond = rayon du dôme). A noter que toute construction dépassant 20 m² doit faire l’objet d’une demande de permis de construire auprès de la commune. *La fréquence : Pour un diamètre donné, il est possible de construire le dôme avec une densité plus ou moins élevée de montants et de connecteurs : c’est ce qu’on appelle la fréquence. Ici nous allons réaliser un dôme de fréquence 2, le plus simple à réaliser (et donc le moins coûteux), cependant la méthodologie reste applicable pour tous types de dôme. *Le support : Selon l’utilisation du dôme il faut prévoir un système de support (ou base) : dans notre cas l’utilisation du dôme en tant que serre nous permet de poser directement le dôme sur des plots en béton sans construire de plancher. poser directement le dôme sur des plots en béton sans construire de plancher.)
- Bar d'extérieur en bois et parpaing + (Faites du ciment en suivant les instructions inscrites sur le sachet. J'ai mélangé le ciment avec un colorant pour donner à mon bar un aspect gris foncé. Cette étape est facultative.)
- Bar d'extérieur en bois et parpaing + (Faites du ciment en suivant les instructions inscrites sur le sachet. J'ai mélangé le ciment avec un colorant pour donner à mon bar un aspect gris foncé. Cette étape est facultative.)
- Introduction à la CNC + (Une fraiseuse est une machine-outil qui us … Une fraiseuse est une machine-outil qui usine par enlèvement de matière, à l'aide d'un outil tournant (fraise). La méthode d’usinage est dite soustractive, à l’inverse la méthode d’usinage d’une imprimante 3D est dite additive (ajout de matière). Le FaBLab est équipé d’une fraiseuse numérique "Signstech 6090DS "personalisée, d’une surface de travail de 1*1 m. et d'une puissance de 1.5kw. C'est une fraiseuse 3 axes, c'est à dire que la fraise (l’outil de coupe) se déplace sur 3 axes qui sont X, Y et Z. ● Axe X => Gauche-droite (Axe horizontal) ● Axe Y => Avant-arrière (Axe de profondeur) ● Axe Z => Haut-bas (Axe vertical) Pourquoi choisir la fraiseuse au lieu de la découpeuse laser ? ● Avantages : -La fraiseuse permet d'usiner des matériaux plus épais, et sans contrainte de composants tels que le chlore ou la colle. Le PVC ne s’usine que sur la fraiseuse ('''jamais''' laser) -Il n’y a pas de zone affectée thermiquement -La fraiseuse numérique permet de produire des pièces en 2.5D (en volume), alors qu’une découpeuse laser ne permet de découper qu’en 2D (contours). ● Inconvénients : -La fraiseuse est moins précise qu’une découpeuse laser -Les fraises étant des outils cylindriques , les coins intérieurs sont forcément arrondis. -La complexité de la machine ainsi que les règles de sécurité qui lui sont liées rendent la machine plus complexe à prendre en main que les autres CNC, et donc un temps plus long avant d'être autonome sur celle-ci.temps plus long avant d'être autonome sur celle-ci.)
- Introduction à la CNC + (La CNC permet d'usiner plusieurs types de … La CNC permet d'usiner plusieurs types de matériaux tels que :
○ Le bois massif et des dérivés du bois (MDF, contreplaqué…)
○ Les matériaux plastiques (PMMA, POM, PC, PVC…)
○ Les métaux non-ferreux (Aluminium tendre, Cuivre, laiton…)
○ Les Mousses (PU, Polystyrène…)
○ Le caoutchouc et certains silicones
de carbone ou de verre) : les micro-poussières générées sont difficiles a filtrer (mauvais pour les poumons)</div> </div><br/>) - How to Use Spotify as an Alarm on iPhone, Android, and Smart Speakers + (Unfortunately, the default Clock app on iP … Unfortunately, the default Clock app on iPhones does not integration with Spotify. However, you can use third-party alarm apps such as Music Alarm Clock for Spotify+ or Kello Alarm Clock to set Spotify songs as your alarm. Here's how: '''Step 1.''' Install and launch the Music Alarm Clock for Spotify+ app or Kello Alarm Clock app on your iPhone. '''Step 2.''' Sign in with your Spotify account on those alarm app and open the app settings. '''Step 3.''' Create a new alarm by tapping the Add button and setting a specific alarm time. '''Step 4.''' Select the alarm sound and choose Spotify as the source. Browse and add your preferred Spotify songs or playlists as the alarm sound. '''Step 5.''' Save the settings, and your alarm will wake you with Spotify songs.ur alarm will wake you with Spotify songs.)
- Glowing LED Butterfly + (Use TinkerCad to design the component that … Use TinkerCad to design the component that will be 3D printed. This is a great opportunity to develop your computer aided design (CAD) skills! What to think about.. - Needs to have holes for the light to go through - Needs to be big enough to hide the Arduino and PCB - Needs to be able to sit on the top of the 9V battery Pre-made butterfly design can be found through this linkrfly design can be found through this link)
- Concrete and wood coffee table + (Use a circular saw to cut four balusters into 12” length pieces and another four balusters into 18” length pieces.)
- Concrete and wood coffee table + (Use a circular saw to cut four balusters into 12” length pieces and another four balusters into 18” length pieces.)
- SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
- SolarOSE - Guide 1: Support structure of the mirror field + (Use the grinder to cut at the length of 2130 mm the two main squared tubes and at the length of 1430 mm the 2 square tubes for the support.)
- Escooterfix - Replace front LED lamp Xiaomi Mi electric scooter + (Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty.)
- Replace dashboard and bluetooth card Xiaomi electric scooter + (Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty.)
- Lampe “Loulou” + (Utiliser 1 planche de bois par fichier svg … Utiliser 1 planche de bois par fichier svg préalablement téléchargé. Le 3e fichier ne nécessite pas autant de surface mais cela vous permettra de refaire des pièces au cas ou. À titre informatif les temps de travail (sur notre machine) des 3 fichiers sont respectivement de 50, 66 et 2 minutes, pour les fichiers 1, 2 et 3. '''Spécifications : '''les tracés noir et rouge doivent traverser/découper le bois, le bleu doit graver sur 1mm de profondeur environ (pour accueillir les rivets). Les autres couleurs ne sont pas utilisées dans ces fichiers. Les spécifications suivantes sont adaptées à une découpeuse laser 40W mais elles sont à ajuster en fonction de votre machine : • NOIR et ROUGE : Puissance = 100% ; Vitesse = 3% ; 500ppi ; • BLEU (à ne pas confondre avec cyan) : Puissance = 100% ; Vitesse = 27% ; 500ppi ;uissance = 100% ; Vitesse = 27% ; 500ppi ;)
- Lampe “Loulou” + (Utiliser 1 planche de bois par fichier svg … Utiliser 1 planche de bois par fichier svg préalablement téléchargé. Le 3e fichier ne nécessite pas autant de surface mais cela vous permettra de refaire des pièces au cas ou. À titre informatif les temps de travail (sur notre machine) des 3 fichiers sont respectivement de 50, 66 et 2 minutes, pour les fichiers 1, 2 et 3. '''Spécifications : '''les tracés noir et rouge doivent traverser/découper le bois, le bleu doit graver sur 1mm de profondeur environ (pour accueillir les rivets). Les autres couleurs ne sont pas utilisées dans ces fichiers. Les spécifications suivantes sont adaptées à une découpeuse laser 40W mais elles sont à ajuster en fonction de votre machine : • NOIR et ROUGE : Puissance = 100% ; Vitesse = 3% ; 500ppi ; • BLEU (à ne pas confondre avec cyan) : Puissance = 100% ; Vitesse = 27% ; 500ppi ;uissance = 100% ; Vitesse = 27% ; 500ppi ;)
- Verres marbrés + (Quoi de plus chic que des verres en marbre … Quoi de plus chic que des verres en marbre ? Des gobelets en carton marbrés ! Parce qu’en plus d’être adaptable à tous les thèmes couleur de mes soirées, ils sont jetables, ne se cassent pas et font leur effet dans les mains de mes invités. C’est décidés je fais toute ma vaisselle (ou presque) comme ça ! C’est la marque Habitat qui a d’ailleurs fait un superbe service dans le même esprit cet hiver…rbe service dans le même esprit cet hiver…)
- Verres marbrés + (Quoi de plus chic que des verres en marbre … Quoi de plus chic que des verres en marbre ? Des gobelets en carton marbrés ! Parce qu’en plus d’être adaptable à tous les thèmes couleur de mes soirées, ils sont jetables, ne se cassent pas et font leur effet dans les mains de mes invités. C’est décidés je fais toute ma vaisselle (ou presque) comme ça ! C’est la marque Habitat qui a d’ailleurs fait un superbe service dans le même esprit cet hiver…rbe service dans le même esprit cet hiver…)
- No-Sew Sock Snowman with Rice in Minutes + (We need to fill the sock with rice to shape the snowman and it will have a little weight so it won't tip over easily. Then tie it with wool thread.)
- Light sensitive e-textile bag + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
- Light sensitive e-textile bag + (We will be using S4A to program the board. … We will be using S4A to program the board. Therefore, we need to first set up our Arduino adequately. Download the S4A software by reaching [http://s4a.cat/ S4A] and then clicking on “Downloads” > Choose the correct version based upon your operating system. Afterwards, download the S4A firmware by reaching this [http://vps34736.ovh.net/S4A/S4AFirmware16.ino link] > Right-click > Save as > Remove the .txt part of the name > Save as type: Change from “Text Document” to “All Files” > Save. = Upload the S4A firmware = You will also need to use Arduino IDE to code and upload the firmware onto your Arduino Leonardo board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. Launch Arduino IDE and open the S4A firmware by going to File > Open or by pressing Ctrl+O and then browsing to the location you previously saved the firmware to. Connect the Arduino to your computer. Select Arduino Leonardo from Tools menu > Board. Select the correct port from the Tools menu > Port. Upload the S4A firmware into it by using the right arrow (→) button at the top right corner of the window, by choosing Sketch > Upload or by pressing Ctrl+U on the keyboard. = Launch S4A = If the S4A firmware was successfully uploaded into the Arduino board, the “searching board…” message should disappear in a few seconds.duino board, the “searching board…” message should disappear in a few seconds.)
- Brightness control activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
- Empty room activity v12 + (What you need[https://docs.google.com/docu … What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] 1 - A remote control device #Deedu; 2 - Environments Nodered and Blynq; 3 - A box whose purpose is to abstract the concept of the home environment. How to create the environment Here we have to describe how the miniature house is created, the environment to be simulated and the things you need to do it: How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. How to build the device? For the construction of the device, consult the guide at the following link: [LINK PINTEREST]. https://studio.youtube.com/video/Kr0x0o6c8DM/edit https://www.youtube.com/watch?v=UEqjpMs15jo To close everything in a wrapper, it may be useful to 3D print the suitable box whose source can be downloaded at the following link. https://www.thingiverse.com/thing:4062244 === How to put precisely the[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.sci31hnwrn1 Blynk app]? === To set up the software system via Blynk, follow the guide: https://www.instructables.com/id/Digital-Environmental-Education-Domotics/ How to put precisely the server Nodered on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST]. on Raspberry? To set up the Nodere software system, follow the guide: [LINK PINTEREST].)
- SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
- SolarOSE - Guide 5: CPC Reflector + (With a cutter, cut a 340x680 mm rectangle … With a cutter, cut a 340x680 mm rectangle of mirror sheet. Mind to protect the reflective surface of the mirror during the operation and to work on the back side. One needs to run the cutter several times to bite the metal and to fold back and forth in order to detach it.fold back and forth in order to detach it.)
- SunZilla - Guide 5: Assembling solar panels frames + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)
- M5Stick C Captive Portal + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Line Follower Robot - King of Maze + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Node Red Controlled Web LED on ESP32 with Raspberry Pi 4 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shopou can get free stuff from their gift shop)
- Ethernet-Enhanced LoRa Gateway Minimizing Delay + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here.] Using this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- Getting Started with ESP-NOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Getting Started with TivaWare Launchpad - Basics + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] to order PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- AWS IoT Core IoT Platform Series - 6 + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY f]or ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Appliances Control with ESPNOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Node Red with Raspberry Pi + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- DHT11 with ESPNOW + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] toget them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- Neo Pixels Ring with Arduino Nano + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY t]o get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop. Also, check out this useful blog on PCBWay Plugin for KiCad from [https://www.pcbway.com/blog/News/PCBWay_Plug_In_for_KiCad_3ea6219c.html here. U]sing this plugin, you can directly order PCBs in just one click after completing your design in KiCad.ick after completing your design in KiCad.)
- Water Quality Monitoring System Based on IOT + (You must check out [https://www.pcbway.com … You must check out [https://www.pcbway.com/ PCBWAY] for ordering PCBs online for cheap! You get 10 good-quality PCBs manufactured and shipped to your doorstep for cheap. You will also get a discount on shipping on your first order. Upload your Gerber files onto [https://www.pcbway.com/ PCBWAY] to get them manufactured with good quality and quick turnaround time. PCBWay now could provide a complete product solution, from design to enclosure production. Check out their online Gerber viewer function. With reward points, you can get free stuff from their gift shop.u can get free stuff from their gift shop.)
- How To Make A Perfect Study Table/en-gb + (The material of your kid's study table pla … The material of your kid's study table plays a vital role. A strong wood desk lasts for ages, metal ones offer a contemporary feeling while the ones produced using steel offer a feeling of modernity. For a wooden study table, '''[https://www.truworthhomes.com/wood-stain.html Rust-Oleum Truworth Wood Stain]''' gives life span and influences your furniture to look young for years. If you have a necessity of moving your work desk frequently, think about picking something lightweight, durable and which fixed with casters. Desks with easy dismantling feature are also easier to move. mantling feature are also easier to move. )
- Mölkky + (You need to cut twelve skittles and one th … You need to cut twelve skittles and one throwing pin, or mölkky (although you may wish to cut two). The skittles need to be cut with one end at around a 30º angle. If you are cutting all the skittles from a single piece of wood, that means that you need to alternate between 30º and 90º cuts, starting with a 30º cut. You are aiming for lengths of about 20cm / 8" for both the skittles and the mölkky./ 8" for both the skittles and the mölkky.)
- Mölkky + (You need to cut twelve skittles and one th … You need to cut twelve skittles and one throwing pin, or mölkky (although you may wish to cut two). The skittles need to be cut with one end at around a 30º angle. If you are cutting all the skittles from a single piece of wood, that means that you need to alternate between 30º and 90º cuts, starting with a 30º cut. You are aiming for lengths of about 20cm / 8" for both the skittles and the mölkky./ 8" for both the skittles and the mölkky.)
- Minetest and 3D scanning + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
- Minetest and 3D scanning + (You will be suing Qlone, an application fo … You will be suing Qlone, an application for smartphone, to 3D scan an objet of your choice. Beware that Qlone requires you to pay for each export, or to buy a subscription that offers unlimited exports over a certain period of time. Unfortunately at the moment, there is not free technology that we are aware of, and that allows 3D scanning with a smartphone. Find how to 3D scan an object with Qlone on [https://docs.google.com/document/d/1ZOmi6oMzwFPIWjr0ZaCyUKKssK1Wi9xdnHIzgtfL5Zc/edit?usp=sharing this] tutorial.IzgtfL5Zc/edit?usp=sharing this] tutorial.)
- Marble Machine No 1 Motor Assembly Instructions + (The parts can be glued together in one go … The parts can be glued together in one go and the parts held in place with rubber bands The bottom '''should not '''be glued but can be used to hold parts aligned while the glue dries. The bottom is left loose for access to switch and batteries. If you don't want the text to be visible, simply turn the part so it face inwards. When viewed from the front the holes for the motor mount (circled in red) should face left as shown in the picture below.d face left as shown in the picture below.)
- Energy saving house with ESP32 + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Pet that lights up upon interaction + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Energy saving house with ESP32 + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Pet that lights up upon interaction + (You will need to use Arduino IDE to code a … You will need to use Arduino IDE to code and upload the firmware onto your ESP32 board. Download the software by visiting [https://www.arduino.cc/en/Main/Software? Arduino IDE] > Scroll down until you see the “Download the Arduino IDE” section and choose the version based upon your operating system (e.g. If you have Windows 7, choose “Windows Installer” / if you have Windows 10, choose “Windows app”) > On the next page choose “Just download” and run the installation files. “Just download” and run the installation files.)
- Simple Train Blocking System + (You'll need to cut the rails or isolate th … You'll need to cut the rails or isolate them to make sure each block is independent. The last track is the security track and is isolated from the rest. The sticker on the plaque is right on the security track. What you see before is the main track (stop zone) and what you see after is the stop zone of the next block. after is the stop zone of the next block.)
- Skin care + ([https://www.sayheybeauty.com/blogs/news/how-to-clean-gua-sha-tools How to Clean Gua Sha Tools])
- Astuce (s) pour plotter + (ouvrir votre fichier pdf avec open office ou world faire un Ctrl A puis un CTRL C puis un clic pour désactiver le A)
- ... + (Sur le site "Make code" faire le code puis l'enregistrer sur le Microbit qui est brancher sur les servomoteurs pour voir si ça fonctionne.)
- Anèmomètre + (utiliser les fichiers STL https://gitlab.com/norbertwalter67/Windsensor_WiFi_1000/-/tree/master/CAD-Files/3D-Parts/STL?ref_type=heads)
- Jeu de dames et d'échecs + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau) '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)''''' ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
- Jeu de dames et d'échecs + ('''Pourquoi donc ?''' Katia voulait se la … '''Pourquoi donc ?''' Katia voulait se lancer directement dans la découpe, moi je voulais tester nos choix et paramètres... finalement j'ai obtenu gain de cause ''(pour une fois).'' On a dupliqué notre damier pour créer un mini damier de 4 par 4 et tester nos paramètres de découpe et de gravure... '''Résultat ?''' Pas de photos :( ''(j'ai commencé le tuto trop tard, on pété le mini-damier pour vérifier notre découpe à mi-bois, puis c'est parti à la poubelle)'' Et là on s'est aperçu que les cases blanches du bord n'avaient pas de bordure (pas de soucis par contre pour celles du centre qui sont bordées par des cases noires) Avec Katia on décide de ne pas graver les bords, mais de faire une découpe à mi-bois ''(l'objectif étant aussi d'essayer des trucs !!!)'' : carré de 300mm par 300mm positionné en X=0/Y=0 Retour sous Inkscape et on en profite pour coloriser les traits de découpe pour ne pas y revenir plus tard (rouge pour la découpe à mi-bois et vert pour la découpe du plateau) '''Conclusion de la 3ème étape''' Temps de travail : une bonne heure a priori ''KiKaFaitKoi : moi pour la volonté, cogitation conjointe, ajustement de modélisation par Katia'' '''Prototyper c'est bien... ''surtout quand on débute :)''''' ons-text">Plutôt que de cramer une demi-planche n'importe comment, faire un petit test évite les déconvenues et fait gagner du temps !</div> </div>)
- Bucket stool made of wood and concrete + (Pain the legs. Use a masking tape to make a clean separation between the rough and painted wood. Before painting, clean the surface to which you'll paint. Wait for the surface to dry completely before removing the tape.)
- Bucket stool made of wood and concrete + (Pain the legs. Use a masking tape to make a clean separation between the rough and painted wood. Before painting, clean the surface to which you'll paint. Wait for the surface to dry completely before removing the tape.)
- ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
- ASKotec Tutorials - DIY Simple analog synth + ( # Take your time and look at the schematic. Start with + and run through the different ways till you end back to - pole # The second image shows you the pins you are going to use # Go and mark all pins on your board )
- Tree planting preparation (Sadhana Forest method) + ( #Install the tube on the planting zone, # … #Install the tube on the planting zone, #Dig dirt from uphill part of the planting zone, #Add the dirt around the tube to form a mound (looks like a volcano), #Add humanure, urine-activated charcoal and soil (e.g. topsoil from other grown trees) in the tube; opsoil from other grown trees) in the tube; )
- Tree planting preparation (Sadhana Forest method) + ( #Install the tube on the planting zone, # … #Install the tube on the planting zone, #Dig dirt from uphill part of the planting zone, #Add the dirt around the tube to form a mound (looks like a volcano), #Add humanure, urine-activated charcoal and soil (e.g. topsoil from other grown trees) in the tube; opsoil from other grown trees) in the tube; )
- Potato Tower + ( #If necessary, collect the stones (see '' … #If necessary, collect the stones (see ''"Gather construction material"''), #Collect the potato eyes, #Collect the soil, #If available, collect the compost or other organic fertilizer solution you want to use for your potatoes, #If necessary and possible, already collect mulching material (corn stalks, rice hulls, hay, straw, dry leaves, BRF …); rice hulls, hay, straw, dry leaves, BRF …); )
- Potato Tower + ( #If necessary, collect the stones (see '' … #If necessary, collect the stones (see ''"Gather construction material"''), #Collect the potato eyes, #Collect the soil, #If available, collect the compost or other organic fertilizer solution you want to use for your potatoes, #If necessary and possible, already collect mulching material (corn stalks, rice hulls, hay, straw, dry leaves, BRF …); rice hulls, hay, straw, dry leaves, BRF …); )
- Bentolux - Module qualité de l'air ambiant + ( *Decoupe au laser des parois de la boite (DOC1) *Assemblage de la boite (DOC2) *Branchement des composants (DOC3) *Programmation du code pour faire interagir les élements (ecran LCD, capteur Temp/Hum, anneau OLED) (DOC4) <br/> )
- Fabrication du Kit ArchiLab + (<nowiki>''<small>Un pdf récapi …
''Un pdf récapitulatif de la liste des fournitures à acheter est disponible dans la partie fichier de la documentation''. Papier :'''<br /><br />• Pour les 2 livrets de jeu :<br /><br />-papier A4<br /><br />• Pour les cartes preuves :<br /><br />-papier A3 250g (x1)<br /><br />• Pour les cartes totems :<br /><br />-papier A4 250g (x1)</nowiki>)
'''1 - Bois :'''
• 1A - Pour formes en bois :
''(les dimensions des tasseaux et tourillons peuvent varier de quelques mm sans problème)''
-tasseau carré 15mmx15mm (x1) [https://www.leroymerlin.fr/v3/p/produits/tasseau-medium-mdf-rabote-16-x-16-mm-l-2-44-m-e156977 [lien]]
-tasseau carré 22mmx22mm (x1) [https://www.leroymerlin.fr/v3/p/produits/tasseau-sapin-petits-noeuds-brut-25-x-25-mm-l-2-4-m-e62056 [lien]]
-tasseau rectangulaire 15mmx30 (x1) [https://www.leroymerlin.fr/v3/p/produits/tasseau-sapin-sans-noeud-rabote-17-x-33-mm-l-2-5-m-e1400911990 [lien]]
-tasseau plat 3mmx30mm (x1) [https://www.leroymerlin.fr/v3/p/produits/tasseau-sapin-sans-noeud-rabote-4-x-33-mm-l-2-5-m-e57172 [lien]]
-tasseau plat 3mmx15mm (x1) [https://www.leroymerlin.fr/v3/p/produits/tasseau-sapin-sans-noeud-rabote-4-x-18-mm-l-2-5-m-e57179 [lien]]
-tourillon Ø30 (x1) [https://www.leroymerlin.fr/v3/p/produits/tourillon-hetre-lisse-sans-noeud-25-x-25-mm-l-1-m-e1400913302 [lien]]
-tourillon Ø15 (x1) [https://www.leroymerlin.fr/v3/p/produits/rond-sapin-sans-noeud-13-x-13-mm-l-2-5-m-e133266 [lien]]
-tasseau quart de rond 15 (x1) [https://www.leroymerlin.fr/v3/p/produits/quart-de-rond-sapin-sans-noeud-14-x-14-mm-l-2-5-m-e1400913726 [lien]]
• 1B - Pour Totems et pour la boite :
-plaque de Contreplaqué peuplier Ep.5mm (surface minimum: 35x16cm) [https://www.leroymerlin.fr/v3/p/produits/predecoupe-contreplaque-peuplier-ep-5-mm-l-80-x-l-40-cm-e1401453621 [lien]]
• Pour Fanions :
-piques à brochette Ø3 (x36) [https://www.leroymerlin.fr/v3/p/produits/lot-de-100-piques-a-brochette-en-bambou-pour-barbecue-e166756 [lien]]
(+papier à poncer grain fin [https://www.leroymerlin.fr/v3/p/produits/feuille-abrasive-dexter-pour-ponceuse-manuelle-grains-180-e1501525463 [lien]])
'''2 - Carton Bois :'''
• Pour Plateaux :
-plaque de carton bois Ep.2mm (surface minimum: 60x80cm*) [https://www.geant-beaux-arts.fr/carton-bois-blanc.html [lien]]
''*possibilité de diviser par 4 (pour découper 1 module à la fois)''
• Pour Cloisons :
-plaque de carton bois Ep.2mm (surface minimum: 42x40cm**)
''**possibilité de diviser par 2 (pour découper 1 module à la fois)''
• Pour Jetons :
-plaque de carton bois Ep.2mm (surface minimum: A3 (29,7x42cm))
[https://www.geant-beaux-arts.fr/carton-bois.html [lien]] (plaque 50x70 assez grande pour découper les cloisons et les jetons)
'''3A - Stickers :'''
• Pour Totems :
-planche stickers A4 (x1)
• Pour Jetons :
-planche stickers A3 (x1)
• Pour Fanions :
-planche stickers A3 (x1)
[https://www.bruneau.fr/equipement-amenagement/affichage-exposition/signaletique/pochettes-d-affichage-adhesives/etiquettes-a3-blanc-mat-avery-a3l001-10-420-x-297-mm-pochette-10-of11610.htm [lien]]
'''3B - Papier :'''
• Pour les 2 livrets de jeu :
-papier A4
• Pour les cartes preuves :
-papier A3 250g (x1)
• Pour les cartes totems :
-papier A4 250g (x1) - PP Sheetpress + (====Tools====
same as above
====Parts==== … ====Tools====
same as above
====Parts====
36 corner brackets
====Steps====
# Prepare your parts. Each "cell" will require 4 brackets, 16 M8Bolts, and 16 washers
# Starting with the 4 corners of the ''entire assembly'', attach the corner brackets and tighten the bolts only to finger-tight.
# Next attach the 920 beam ends to the outer perimeter.
# Next, attach the inner beams in place. Ensure that all beams are equally spaced. (remember that the 2 interior beams are shorter though)
interior beams are shorter though) <br/>) - Virtual Fence - Anti Theft Device + (<nowiki>A Fence is a physical bounda …
A Fence is a physical boundary, which is used to restrict kids and dogs from exiting the border Boundaries provide a layer of security, which also restricts entry from outside. But these boundaries need to be maintained heavily. And once an object has moved out or stolen, then the theft cannot be further located. e Coffee Shop, or even parlor.<br /><br />But before we get started -</nowiki>)
This brings us to a solution, which is geofencing a physical device attached to our belonging. This belonging would be a mere part of the IoT - Internet of ''''Things'.'''
The above pictorial is a sample of Geofence in a public area. Best part? Since it is on a virtual map, having a virtual fence would have no effect on whether you own the area. This area could be your Home, Office, favorite Coffee Shop, or even parlor.
But before we get started - - How to Set Tidal Sleep Timer + (<nowiki>If you are using an Android …
If you are using an Android phone, you need to install a professional Sleep Timer app from the Google Play store on your Android device and then create a sleep timer according to your needs. Now, look at the steps below. ''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music.</nowiki>)
'''Step 1.''' Download ''''Sleep Timer (Turn music off)'''' on your Android from Google Play.
'''Step 2.''' Launch the app and tap on the three vertical dots in the top right corner of the home screen.
'''Step 3.''' On the '''Setting''' menu, click ''''Player to launch on start'''' and select ''''Tidal'''' from the app list.
'''Step 4.''' Go back to the '''Settings''' menu and then choose ''''On sleep'''' > ''''Perform action'''' to personalize details of the sleep timer for Tidal music. - Qubitro Device Data - IoT Platform Series + (<nowiki>To get started with Qubitro, …
To get started with Qubitro, we will first need to create an account. Go to the Qubitro website (https://www.qubitro.com/) and click on the "Sign Up" button. You will be prompted to enter ''Full Name'', ''Email Address,Country'', and ''password'' to create your account. shall automatically be logged in to our account.</nowiki>)
Once, we have created the account, we can log in from '''https://portal.qubitro.com/login.''' However, we shall automatically be logged in to our account. - Water probe 9-11 activities + (<nowiki>To have a functioning water …
To have a functioning water probe, you ll need to upload a specific program onto the arduino uno board. ><br />int oldAnalogValue=1000;<br /><br />float returnVoltage=0.0;<br /><br />float resistance=0.0;<br /><br />double Siemens;<br /><br />float TDS=0.0;<br /><br />while(((oldAnalogValue-analogValue)>threshold)</nowiki>)
Here is the sketch you need to upload:
/*
Water Conductivity Monitor
Sketch for an Arduino gadget that measures the electrical
conductivity of water.
This example code is based on example code that is in the public domain.
*/
const float ArduinoVoltage = 5.00; // CHANGE THIS FOR 3.3v Arduinos
const float ArduinoResolution = ArduinoVoltage / 1024;
const float resistorValue = 10000.0;
int threshold = 3;
int inputPin = A0;
int ouputPin = A5;
void setup()
{
Serial.begin(9600);
pinMode(ouputPin, OUTPUT);
pinMode(inputPin, INPUT);
}
void loop()
{
int analogValue=0;
int oldAnalogValue=1000;
float returnVoltage=0.0;
float resistance=0.0;
double Siemens;
float TDS=0.0;
while(((oldAnalogValue-analogValue)>threshold) - EMI probe 9-11 + (<nowiki>Whether you re using an ardu …
Whether you re using an arduino uno or a nano, the code that you ll need to upload in order for the probe to function correctly is basically the same. lay);<br /><br />Serial.begin(9600);<br /><br />}<br /><br />void loop()<br /><br />{<br /><br />val = analogRead(inPin);<br /><br />Serial.println(val);<br /><br />dispData(val);<br /><br />val = map(val, 1, 100, 1, 2048);<br /><br />tone(9,val,10);<br /><br />}<br /><br />void dispData(int i)<br /><br />{<br /><br />if ((i<-999)</nowiki>)
Just make sure to program the correct digital pin for the piezo speaker. In the instructions above, we connected the speaker on D9 on an arduino uno, and D3 on an arduino nano.
// Arduino Electromagnetic interference detector
// Code modified by Patrick Di Justo, based on
// Aaron ALAI EMF Detector April 22nd 2009 VERSION 1.0
// aaronalai1@gmail.com
//
// This outputs sound and numeric data to the 4char
#include
#define SerialIn 2
#define SerialOut 7
#define wDelay 900
int inPin = 5;
int val = 0;
SoftwareSerial mySerialPort(SerialIn, SerialOut);
void setup()
{
pinMode(SerialOut, OUTPUT);
pinMode(SerialIn, INPUT);
mySerialPort.begin(19200);
mySerialPort.print("vv");
mySerialPort.print("xxxx");
delay(wDelay);
mySerialPort.print("----");
delay(wDelay);
mySerialPort.print("8888");
delay(wDelay);
mySerialPort.print("xxxx");
delay(wDelay);
Serial.begin(9600);
}
void loop()
{
val = analogRead(inPin);
Serial.println(val);
dispData(val);
val = map(val, 1, 100, 1, 2048);
tone(9,val,10);
}
void dispData(int i)
{
if ((i<-999) - 3D CNC milling avec CAM Fusion 360 + (<section class="step"><br />Be …
Before beginning CAM programming, you need to consider the part and the best approach to machining. These decisions depend on the shape of the model, the material, and the constraints of the CNC machine you are using. In this lesson, you will learn how these factors impact your machining strategy with respect to workholding, registration (making sure the CNC knows where the part is), and CAM settings.
3D Toolpathing
If you completed the CAD and CAM Class, you worked with 2D toolpaths, in which the end mill stays at a fixed depth (Z-level) throughout a machining pass, moving only in X and Y while cutting. This type of machining is ideal for prismatic parts - parts in which all machined faces lie normal to the machine tool spindle.
When programming non-prismatic parts, such as molds or organic shapes like the the parts below, 2D operations are insufficient. You need to use 3D CAM operations, in which the end mill moves dynamically in X, Y, and Z.
Workholding
Workholding is the strategy for holding your part rigidly during the machining process. When programming with 3D toolpaths, workholding is an important initial consideration. This is especially true of parts that require machining on both sides, when the part will be flipped between setups.
When programming for prismatic parts, you may have noticed that 2D and 2.5D CAM only requires a CAD model of the part that you want to machine, without any extra features for workholding attachment or registration. This is because the part takes the shape of a rectangular prism, which can be held easily inside a vise or fixed to a spoiler board.
But what do you do when your shape is more organic or irregular, and also must be flipped to machine on both sides? In this case, you need to model additional material that will hold your part inside a vise, against a spoiler board, or flat against the bottom of the machine. It's very hard to program the CAM without having these features incorporated into your model.
In other words, 3D flip machining requires that you model the stock you want left behind, as well as tabs to prevent your part from coming loose inside the machine. These tabs will be cut off and sanded down after machining, usually with a bandsaw and disk sander.
Note: Another, more advanced, technique for workholding for irregular shapes in metal is a soft jaw system. You would machine your own custom aluminum jaws to use with a Lang or Kurt vise, and these custom jaws would hold your part after the flip. No tabs needed.
For your serving spoon, you will have two tabs--one on each end--and a rectangular prism of stock that will hold the spoon flat after the flip. When modeling, it's a good idea to make your stock and tabs another body, separate from your part.
Registration
Because the spoon will be machined from both sides (flip machining), you need a way to ensure that the CNC machine can locate the part accurately after it has been moved. This is called registration.
If you have used the Haas before, you're familiar with using a probe to locate your part . The DMS, however, like many table routers, does not have a probe. When using the DMS to locate the origin of your Work Coordinate System (Work Home), you will insert a tool into the spindle and jog it to the correct location. It's common to trap a piece of paper between the stock and the tool to ensure that Z is correct. In the DMS machine class you will learn how to enter the codes to set your WCS in this way. As you might imagine, this system is not accurate, because you're just "eyeballing" this location.
This means that if you have a part that requires flip machining, you need to consider how to get the two sides to line up properly with one another. There are lots of options, and they all have advantages and disadvantages based on the specifics of your part. Some common methods include:
--Attaching stops to your spoiler board (waste board under your part that can be machined) or machine bed
--Machining a contour into your spoiler board, then placing your stock exactly inside that contour
--Drilling holes for dowels that go into the spoiler board beneath your part (most accurate)
This final technique is the the method you will use for the spoon. While machining the front side of the spoon, you will also drill three holes through the stock and partially into the spoiler board. After you flip your part, you will insert dowels through the holes and into the spoiler board that will align your part perfectly with your first side.
CAM Settings
The specifics of the project - machining wood on the DMS router - will also determine some of the choices you make when programming toolpaths.
-Tool numbering
If you are a Pier 9 shop user, you will be using the DMS tool library. When you have simulated and finalized your CAM program, make sure that your tools are labeled in the chronological order that they are used. You will learn later in this class how to edit tool numbers.
Remember that the chronological tool numbers in your program do not correspond to the numbers in the DMS tool library drawer. For instance, the fifth tool you use in your program might be the 1" Rough Short End Mill, which is labeled #34 in the DMS library. You will see the DMS library number in the comment for each tool, which will appear in your setup sheet (machining plan). You will learn later how to generate setup sheets.
If you are not using Pier 9's DMS, you'll either be using custom tools, or tools from your own tool library. If using your own library, be sure to label your tools in the chronological order they will be used.
-Rules for roughing
Machining in wood or plastic on the DMS is not high speed machining (HSM). This means that you may use Adaptive toolpaths for roughing, but you cannot use the whole length of the cutter.
When machining wood or plastic, follow the Stepover and Stepdown Rule: The stepover and stepdown should never exceed 50% of the tool diameter. - Bento Red Room + ('''3D Printing''' * Filament: PVA and ABS … '''3D Printing''' * Filament: PVA and ABS * Wood '''Electronic''' * 1 Arduino Uno cards * male-male and male-female prototyping cables * LCD SSD1306 128 x 64 * 1 LED 8mm * 2 ring of 12 LEDs * 1 potentiometer * 1 BME280 weather sensor * 1 switch * 1 x 5V power supply * 220 and 10000 Ohms resistors * 3 x servomotors * Buzzer === Tools === '''Machines''' * 3D printer * Découpeur de laser '''Software''' * Tinkercad, Microsoft 3D builder, Blender * Cura Ultimaker * Arduino '''Prototyping''' * soldering iron * cutting pliers * wire stripper * glueon * cutting pliers * wire stripper * glue)
- Bento Night Sky + ('''3D Printing''' *Filament: PVA and ABS … '''3D Printing''' *Filament: PVA and ABS *Wood '''Electronic ''' *1 Arduino Uno cards *male-male and male-female prototyping cables *LCD SSD1306 128 x 64 *1 LED 8mm *2 ring of 12 LEDs *1 potentiometer *1 BME280 weather sensor *1 switch *1 x 5V power supply *220 and 10000 Ohms resistors *3 x servomotors *Buzzer ===Tools=== '''Machines''' *3D printer *Découpeur de laser '''Software ''' *Tinkercad, Microsoft 3D builder, Blender *Cura Ultimaker *Arduino '''Prototyping''' *soldering iron *cutting pliers *wire stripper *glue iron *cutting pliers *wire stripper *glue)
- How to Share Spotify Song on Snapchat + ('''''Q: Is there a way to share and at the … '''''Q: Is there a way to share and at the same time, play Spotify music on Snapchat?''''' '''A:''' Spotify hasn’t rolled out the playing option on Snapchat yet. To do so, you have to download music from Spotify in advance and share the full song file on Snapchat to your friends. But then again, Spotify songs are protected by DRM and users are not allowed to play them on any other platforms.So a third party tool like [https://www.tuneskit.com/music-converter-for-spotify/ TunesKit Spotify Music Converter] is needed to transform Spotify DRM songs into common audio files such as MP3, AAC and M4A. Then you can apply them into any platform without restrictions. '''TunesKit Spotify Music Converter''' is a feature-rich tool designed to convert Spotify Ogg files into 6 types of common audio formats including MP3, FLAC, AAC, WAV, M4A and M4B. With a 5X faster converting speed, it maintains the output files with 100% original audio quality. '''Step 1 Launch TunesKit and Import Spotify Songs''' Open TunesKit Spotify Music Converter. And then drag and drop songs from Spotify into TunesKit’s interface, and they’ll be automatically imported. '''Step 2 Set Up Output Format and Configurations''' Turn to Preference and then enter Convert menu. There're 6 types of output formats you can choose including MP3, M4A, M4B, AAC, WAV and FLAC. You can also customize the output channel, sample rate and bit rate. '''Step 3 Start Converting''' Click the "Convert" button and TunesKit will start operating. When it is all done, click the "Converted" button and you'll get the output file list. '''Step 4 Share and Play Spotify Songs on Snapchat''' Connect your phone with your computer, and then send the converted Spotify song files to your phone. Now you can share these songs to your friends and listen to them together on Snapchat.s and listen to them together on Snapchat.)
- Lampe à poser, Miroir à poser et Bougeoir en découpe laser + (Emboitez les bakubons comme indiqué sur les photos)
- Lampe à poser, Miroir à poser et Bougeoir en découpe laser + (Emboitez les bakubons comme indiqué sur les photos)
- Sérigraphie avec un pochoir de vinyle + (L'image que vous choisirez sera en lien di … L'image que vous choisirez sera en lien direct avec la difficulté du projet. Voici quelques facteurs à prendre en considération lorsque vous choisirez l'image à imprimer. Lors de la création de votre image, gardez en tête que nous créons un pochoir: il faudra que l'extérieur soit d'une seule pièce. '''Il est impossible d'avoir une forme dans une autre, car le centre sera perdu.''' Pour écrire cherchez une typographie pour pochoir (Stencil typo). De nombreuses œuvres sont créés pour des pochoirs, n'hésitez pas à vous en inspirer! Assurez-vous de sélectionner une image d'une seule couleur qui pourra être vectorisé à l'étape suivante. pourra être vectorisé à l'étape suivante.)
- Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
- Turn signal biking jacket + ('''Plan the aesthetic and electrical layou … '''Plan the aesthetic and electrical layout of your piece''' Decide where each component is going to go and figure out how you will sew them together with as few thread crossings as possible. Make a sketch of your design that you can refer to as you work. The photos below show the sketches for my jacket. Stitching for power (+) is shown in red, ground (-) in black, LEDs in green, and switch inputs in purple.EDs in green, and switch inputs in purple.)
- Drone aile volante + ( *Commencez par couper les marges avec une … *Commencez par couper les marges avec une règle et un cutter, prenez garde à suivre correctement le tracé en pointillé. *Se munir du tube de colle, puis encollez la feuille du coin en haut à gauche (Répartissez de la colle sur toute la surface du verso ) , là positionner sur un carton plein d'au moins 76cm*50.6cm et de 3mm d'épaisseur. Les deux bords en traits pleins doivent être superposés aux bords du carton. *Encoller la seconde section, là positionner à côté de la première en veillant à ce que les repères coïncident. *Poursuivre ceci jusqu'à ce que tout le plan soit reconstitué, puis faire de même pour les quatre autres. Les deux derniers peuvent êtres découpés pour utiliser les chutes de cartons. *Laisser sécher quelques heures. *A l'aide d'un cutter et d'une règle découper les pièces une par une sur les très pleins, évider les parties à évider. Les courbes peuvent êtres découpé à la scie à champ tourné. *Pour terminer poncer les bords des pièces découpés. miner poncer les bords des pièces découpés. )
- OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
- OpenReflex: 3D Printed Camera + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
- Chauffage solaire version ardoise + ('''Remarque''': Ici, le cadre est dimensio … '''Remarque''': Ici, le cadre est dimensionné pour accueillir une vitre de 1m x 2m par 6mm d'épaisseur, un fond en contreplaqué filmé de 10mm et une couche isolante de 22mm en STEICO. Les dimensions seront donc à adapter en fonction des disponibilités de chacun. * Préparer 2 chevrons de section 93mm x 45mm et de 209 cm de longueur. * Préparer 2 chevrons de section 93mm x 45mm et de 109 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 209 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 109 cm de longueur. * Coller à la colle PU et visser les liteaux sur les chevrons associés une face de 93mm d'épaisseur, à 32mm d'un des bords. '''Remarque''': Ces 32mm correspondent à l'épaisseur isolant + contreplaqué filmé. Il reste 8mm sur l'autre bord afin d'accueillir l'épaisseur de la vitre et d'un joint compribande. * Découper les angles de chaque profilé bois ainsi obtenu à 45° en portant bien l'attention sur le sens de la découpe. La coupe se fait sur la longueur de 93mm. '''Remarque''': Cette coupe permet de retrouver la dimension 1m x 2m de la vitre en intérieur du cadre. * Assembler le cadre à l'aide de colle PU et de longues vis à bois dans chacun des 4 angles.ngues vis à bois dans chacun des 4 angles.)
- Chauffage solaire version ardoise + ('''Remarque''': Ici, le cadre est dimensio … '''Remarque''': Ici, le cadre est dimensionné pour accueillir une vitre de 1m x 2m par 6mm d'épaisseur, un fond en contreplaqué filmé de 10mm et une couche isolante de 22mm en STEICO. Les dimensions seront donc à adapter en fonction des disponibilités de chacun. * Préparer 2 chevrons de section 93mm x 45mm et de 209 cm de longueur. * Préparer 2 chevrons de section 93mm x 45mm et de 109 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 209 cm de longueur. * Préparer 2 liteaux de section 20mm x 53mm et de 109 cm de longueur. * Coller à la colle PU et visser les liteaux sur les chevrons associés une face de 93mm d'épaisseur, à 32mm d'un des bords. '''Remarque''': Ces 32mm correspondent à l'épaisseur isolant + contreplaqué filmé. Il reste 8mm sur l'autre bord afin d'accueillir l'épaisseur de la vitre et d'un joint compribande. * Découper les angles de chaque profilé bois ainsi obtenu à 45° en portant bien l'attention sur le sens de la découpe. La coupe se fait sur la longueur de 93mm. '''Remarque''': Cette coupe permet de retrouver la dimension 1m x 2m de la vitre en intérieur du cadre. * Assembler le cadre à l'aide de colle PU et de longues vis à bois dans chacun des 4 angles.ngues vis à bois dans chacun des 4 angles.)
- SolarOSE : concentrateur solaire thermique linéaire de fresnel + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
- SolarOSE : concentrateur solaire thermique linéaire de fresnel + ('''Sorties:''' Le concentrateur de démonst … '''Sorties:''' Le concentrateur de démonstration : * champ de miroirs * récepteur * système électronique * usage de démonstration + déchets et ressources restantes : restes de miroir, restes de métal (chutes d’acier, visserie, plomberie), restes de bois, restes d’isolant, restes de colle, restes de mastic.solant, restes de colle, restes de mastic.)
- How to Allow or Block Apple Music Explicit Content + ('''Step 1.''' Go to '''Settings''' on your … '''Step 1.''' Go to '''Settings''' on your iPhone and tap '''Screen Time'''. '''Step 2.''' Scroll to the '''Content & Privacy Restrictions''' option under '''Screen Time'''. '''Step 3.''' Make sure your Content & Privacy Restrictions toggle is enabled and tap the '''Content Restrictions''' option beneath. '''Step 4.''' Tap the '''Music, Podcasts, Fitness''' to select what content to allow. '''Step 5.''' Here you can select allow content from '''Explicit''' to '''Clean'''. allow content from '''Explicit''' to '''Clean'''.)
- How to Create Spotify Codes for Sharing with Others + ('''Step 1.''' Open the Spotify app and tap … '''Step 1.''' Open the Spotify app and tap the '''search''' button at the bottom. '''Step 2.''' Type in the name of the song in the search bar and search for it. '''Step 3.''' Scroll down the search results and find the exact song you’d like to share. '''Step 4.''' Here tap the '''three-dot icon''' beside the song name directly. '''Step 5.''' You’ll see a wave-alike Spotify code in the menu.see a wave-alike Spotify code in the menu.)
- Poelito - Poêle de masse semi-démontable + (Le principe du Poelito est de construire u … Le principe du Poelito est de construire un poêle rocket dans un bidon. Le fond du bidon est tapissé de mélange isolant. Cela ne dispense pas de poser son poêle sur un support incombustible. La partie inférieure, où le feu se développe, est coulée en béton réfractaire autour d’un coffrage en tubes de carton. Ces tubes forment des réservations creuses : le circuit du feu et de fumées. La partie inférieure constitue la base du foyer. C’est une masse fixe. La moitié supérieure est constituée de tuyaux métalliques amovibles et remplie de sable que l’on peut laisser sur place ou transporter séparément. Le foyer est fermé soit par une plaque de fonte, soit par une plaque vitro céramique, recouvert par le couvercle du bidon en guise de finition. Le conduit d’évacuation est à l’extérieur du bidon. La connexion se fait par un T de raccordement avec tampon de ramonage. La traversée du plafond et la sortie de toit (ou tout ce qui est à l’extérieur de l’habitat) doit obligatoirement être isolée. On voit sur l'image le bas du conduit d’alimentation vertical avec vers le premier plan son cendrier, et vers l’arrière-plan le départ horizontal des flammes : ce premier ensemble constitue le brûleur. A l’arrière-plan on voit les 2 reprises des fumées, une de chaque côté du conduit de départ de flamme. Ces 2 reprises se rejoignent par en dessous via un collecteur, qui envoie les fumées vers l’arrière, en direction de l’évacuation des fumées). Cet ensemble constitue le collecteur. Raccordement au conduit d’évacuation par T avec tampon au conduit d’évacuation par T avec tampon)
- Wio WM1110: Quick Start Guide for Seamless Integration + ('''This guide explains the steps to seamle … '''This guide explains the steps to seamlessly integrate the WM1110 sensor module with The Things Network (TTN) and ThingSpeak for data transmission and visualization.''' The [https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html?queryID=86ddeaf2f0e1846781c93ee0739996d3&objectID=5677&indexName=bazaar_retailer_products seeed studio Wio-WM1110 Dev Kit] is based on the [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] Wireless Module, which integrates both a Semtech LoRa® transceiver and a multi-purpose radio front-end for geolocation functionalities. The LoRa® transceiver enables low-power, high-sensitivity network coverage, while GNSS (GPS/BeiDou) and Wi-Fi scanning work together to offer comprehensive location coverage. Additionally, the Dev Kit provides connectivity options for a variety of peripherals, making it a versatile platform for developing diverse IoT applications. The [https://www.seeedstudio.com/Wio-WM1110-Module-LR1110-and-nRF52840-p-5676.html?queryID=777e87bf936e9951b01169e582eaaa0b&objectID=5676&indexName=bazaar_retailer_products Wio-WM1110] is a powerful fusion positioning module designed for developing low-power, long-range IoT applications. It combines the capabilities of the [https://www.semtech.com/products/wireless-rf/lora-edge/lr1110 Semtech LR1110] LoRa transceiver and the [https://www.nordicsemi.com/products/nrf52840 Nordic nRF52840] microcontroller, offering a comprehensive solution for building connected devices with the following features: * '''Long-range wireless communication:''' Utilizing Semtech's LoRa technology, the Wio-WM1110 enables low-power communication over vast distances, making it ideal for connecting devices in remote locations. * '''Global Navigation Satellite System (GNSS):''' Integrated GNSS support, including GPS and BeiDou, provides accurate location tracking capabilities for your IoT devices. * '''Wi-Fi connectivity:''' In addition to LoRaWAN and GNSS, the Wio-WM1110 also offers Wi-Fi connectivity, providing another option for device communication and internet access. * '''Bluetooth:''' The module further extends its connectivity options by supporting Bluetooth protocols, enabling communication with other Bluetooth-enabled devices. * '''Fusion positioning:''' By combining the data from LoRaWAN, GNSS, Wi-Fi, and Bluetooth, the Wio-WM1110 can achieve highly accurate and reliable positioning, even in challenging environments. * '''Low-power operation:''' The Wio-WM1110 is designed for low-power consumption, allowing your devices to operate for extended periods on battery power. * '''Open-source platform:''' The Wio-WM1110 is based on an open-source platform, providing developers with access to the underlying hardware and software, allowing for greater customization and flexibility. and software, allowing for greater customization and flexibility.)
- Sérigraphie par émulsion photographique + ('''Un écran de sérigraphie''' L'écran est … '''Un écran de sérigraphie''' L'écran est composé d'un tissu tendu sur un cadre de bois ou d'aluminium. J'utiliserai ici un tissu avec du 110 mailles (fil par pouces). Les tissus à mailles élevés (200 - 300) impriment avec plus de précision, mais laissent passer moins d'encre. Les tissus aux mailles de 85 à 150 impriment moins de détails, mais laissent une couche raisonnable d'encre, utile pour créer une impression opaque. '''Une source de lumière (ampoule survoltée ou source de soleil direct)''' '''Une raclette''' '''Du ruban gommé''' '''Une feuille d'acétate transparente''' '''De l'encre de sérigraphie''' Attention a choisir l'encre idéale pour votre projet (Si vous imprimez sur tissu, choisissez une encre pour tissu). '''Un kit d'émulsion photographique''' Ce kit comporte 3 bouteilles (dans l'image je n'ai que les deux bouteilles blanches). Le produit ne dure que 4 mois avant de devoir être jeté, et devra être conservé au réfrigérateur. (voir étape 4: préparer un kit d'émulsion photographique) '''Un accès à un lavabo''' ...Et tout ce qu'il faut pour nettoyer: savon, linge à vaisselle, éponge. '''Une chambre noire''' Une pièce sans fenêtre bien ventilée.'' Une pièce sans fenêtre bien ventilée.)
- VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
- VERBIS - Desktop 8x8 RGB LED Matrix Word Clock + ('''Wooden photo frame''' You can make you … '''Wooden photo frame''' You can make your own frame, there are a dozen of articles about this, even here on Instructables. But a simpler solution would be finding a framing company where you can order a personalized frame with your required dimensions and you can choose from many frame types. This is exactly what I did. I ordered my frames with a specific dimension: the framed photo, in my case object (display) is 80x80mm. I also asked for an accurate dimension, I didn't want the frame to be too big for the 3D printed plastic grid. '''Plexiglass support''' The plexiglass support can be also be made DIY but for an amateur it is not very easy to cut and blend plexiglass. So I ordered several supports from an advertising company that makes all kinds of plexiglass objects. The dimensions I used are: width - 120mm, first part length - 180mm, second part length - 50mm, 15° bending angle. '''Display plexiglass sheet''' The 3mm grey smoked plexiglass sheet can be cut from a bigger sheet, obtaining the required 80x80mm dimension. '''Plastic grid''' The STL file for 3D printing can be downloaded from [https://www.tinkercad.com/things/arRYOVE5Lbk Tinkercad] '''Display Printed Paper Sheet''' The SVG file for the Printed Paper Sheet is attached, and it can be edited with Inkscape. You can make your own display layout based on this SVG file, I used [https://www.wordsearchkit.com/ Word Search Construction Kit] software to generate a words layout for the time display. You can print the file repeatedly on the same sheet of paper to achieve a good, opaque, black background. I got very good results with a cheap inkjet printer and standard white copier paper. I cut off the layout with a pair of scissors. '''Plastic box for electronics''' The files that you can 3d print are also on [https://www.tinkercad.com/things/2vKBHQ1HEI3 Tinkercad]. I used some already purchased jewelry boxes, I only designed a new box base because the boxes were too tall. The files on Tinkercad are based on this type of boxes. '''Detailed instructions''' (follow the images above) * choose (and mark) a side of the frame to be the top of the clock, clean the smoked plexiglass sheet, put it in the frame; * place the printed paper sheet and the 3D printed grid; * drill with 2 mm diameter bit through the plastic grid to make room for the screws in the frame; * screw the plastic grid; * mark on the frame the place for holes and lock the frame to the plexiglass support; * drill the holes with a 2mm diameter bit (enlarge the holes in the support with a 3mm diameter bit, make the coining with a 10mm diameter bit) and screw it all together. The last image shows an almost finished enclosure. image shows an almost finished enclosure.)
- AttendSyS : Système de pointage connecté + ( * '''<u>Description :</u>''' … * '''Description :''' Ce premier boîtier nous a permis de faire un ensemble de tests notamment de s'assurer que la carte RFID est bien détectée même à plusieurs centimètres du module avec un couvercle de séparation de 1 mm. Il a été produit en lien avec la première carte électronique été produit en lien avec la première carte électronique )
- AttendSyS : Système de pointage connecté + ( * '''<u>Description :</u>''' … * '''Description :''' Ce premier boîtier nous a permis de faire un ensemble de tests notamment de s'assurer que la carte RFID est bien détectée même à plusieurs centimètres du module avec un couvercle de séparation de 1 mm. Il a été produit en lien avec la première carte électronique été produit en lien avec la première carte électronique )
- NEXT ENGINE 3D SCANNER :How to use it + ( * '''WEIGHT''' 7.68 KG * '''INPUT POWER'' … * '''WEIGHT''' 7.68 KG * '''INPUT POWER''' 100-240 VAC/60W * '''Measurement system''' MultiStripe Laser Triangulation (MLT) *'''Sensor''' Twin 5.0 Mega-pixel CMOS RGB image sensors *'''SIZE''' 276 x 223 x 91mm *'''Field AREA''' 5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide) *'''Capteur density''' 268K points/in (Macro) and 29K points/in (Wide) *'''Texture Density''' 500DPI ( Macro) and 200DPI (Wide) *'''Dimensional Accuracy''' 100 micorn ( Marco) and 300 micron ( Wide) *'''Acquisition Speed''' 50,000 points/sec *'''CONNECTIVITY''' USB 2.0 *'''OPERATING SYSTEM''' Windows XP/Vista/7/8 (64-bits) *'''MINIMUM REQUIREMENT''': 2 GHz Dual-core, 3GB RAM, 256MB graphics *''' FILE FORMAT''' STL, OBJ, VRML, XYZ, PLY *'''FILE SIZE''' 200MB fot typical model * '''SOFTWARE''' ScanStudio™ (FREEWARE) del * '''SOFTWARE''' ScanStudio™ (FREEWARE) )
- Design your personal logo with Tinkercad + ( * Open a new document in tinkercad * Sel … * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
- Laser cut Spirograph + ( * Open a new document in tinkercad * Select view TOP * ''Switch to Orthographic view'' ''Always use Shift plus Right-click to move the workplane.'' ''Use the Mouse-wheel to zoom-in zoom-out.'' )
- Nœud papillon en ficelle + ( * Lorsque vous arrivez au niveau du centre, pensez à insérer un ruban (ou autre système de fermeture) afin de nouer le nœud papillon autour du cou. * Puis continuez de recouvrir le carton. * Il est préférable de prévoir deux couches de ficelle. )
- Nœud papillon en ficelle + ( * Lorsque vous arrivez au niveau du centre, pensez à insérer un ruban (ou autre système de fermeture) afin de nouer le nœud papillon autour du cou. * Puis continuez de recouvrir le carton. * Il est préférable de prévoir deux couches de ficelle. )
- Open Workshop Setup/de + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Open Workshop Setup + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
- Creating a trash ball + ( * gather trash around remains of training soft materials )
- Creating a trash ball + ( * gather trash around remains of training soft materials )
- OpenHandiDesk + ((si on prend pas en compte les petites erreurs de dessin, oups))
- OpenHandiDesk + (la toute premiere esquisse du projet, la version 0 !)
- Stitch O'Clock + (
*"coudre" la plaque de bois avec la corde …
*"coudre" la plaque de bois avec la corde d'après les instructions gravées au dos. Commencer
*vérifier l'avant de la plaque si les "coutures" forment les indexes de l'horloge comme sur la photo 3 fier l'avant de la plaque si les "coutures" forment les indexes de l'horloge comme sur la photo 3 ) - Original Prusa i3 MK3S kit assembly + ( *<span style="color:black;"> '''The … * '''The kit includes''' *Needle-nose pliers (1x) * Philips screwdriver (1x) * Allen key (6x) *The printer's package contains a lubricant, which is intended for maintenance. No need to use it now the bearings are lubricated. There is a dedicated online manual on how to clean the printer and apply the lubricant. See [https://help.prusa3d.com/en/guide/printer-maintenance-tips_23200/ help.prusa3d.com/maintenance-tips] No soldering is required. No wire crimping is required. ips_23200/ help.prusa3d.com/maintenance-tips] No soldering is required. No wire crimping is required. )
- Jardinière + ( *Positionnez les lamelles sur une surface plane puis disposez les tasseaux fins comme sur la photo ci-joint, à l’aide d’une visseuse mettre minimum 3 vis par tasseau (vis de 30mm) *Effectuez cette étape 2 fois )
- Jardinière + ( *Positionnez les lamelles sur une surface plane puis disposez les tasseaux fins comme sur la photo ci-joint, à l’aide d’une visseuse mettre minimum 3 vis par tasseau (vis de 30mm) *Effectuez cette étape 2 fois )
- Tree planting (Aranya Agricultural Alternatives method) + ( *Define the plantation zone, *Make sure t … *Define the plantation zone, *Make sure that your sapling is ready for transplantation, *Make sure that weather conditions will be favorable for the young tree to grow (avoid dry season peak), *If applicable, [[Clay-pot-irrigation system (Aranya Agricultural Alternatives method)|build your clay-pot irrigation system]], *If applicable, [[Tree planting preparation (Sadhana Forest method)|build your bottle-irrigation system]]. Feel free to adapt the procedure to your environment. to adapt the procedure to your environment. )
- Tree planting (Aranya Agricultural Alternatives method) + ( #If you use a bottle-irrigation system: # … #If you use a bottle-irrigation system: ##Loosen the cap to open the bottle-irrigation system, ##As you add water in the bottle, measure the amount of water added in the bottle-irrigation system: ###If the bottle was empty, increase the frequency of your examinations, ###If the bottle was not empty, reduce the frequency of your examinations; ##Tighten the cap to close the bottle-irrigation system; #If you use a clay-pot-irrigation system: ##Remove the clay plate from the clay pot to open the clay-pot-irrigation system, ##As you add water in the clay pot, measure the amount of water added in the clay-pot-irrigation system: ###If the clay pot was empty, increase the frequency of your examinations, ###If the clay pot was not empty, reduce the frequency of your examinations; ##Install the clay plate on the clay pot to close the clay-pot-irrigation system: #Else: ##If the moisture level is low, add water and increase the frequency of your examinations, ##If the moisture level is high, reduce the frequency of your examinations. reduce the frequency of your examinations. )
- BENTO BOX - SPACE FLAN + (<nowiki><div class="mw-highlight …
// Variables qui ne peuvent être modifiées,
const int buttonPin = 2; // Bouton poussoir
const int ledPin = 7; // Anneau NeoPixel Ring 12 LED RGB
// Bibliothèque urilisée pour écran OLED
#include
// =======================
// Paramètrages écran OLED
// =======================
#define nombreDePixelsEnLargeur 128 // Taille de l'écran OLED, en pixel, au niveau de sa largeur
#define nombreDePixelsEnHauteur 64 // Taille de l'écran OLED, en pixel, au niveau de sa hauteur
#define brocheResetOLED -1 // Reset de l'OLED partagé avec l'Arduino (d'où la valeur à -1, et non un numéro de pin)
#define adresseI2CecranOLED 0x3C // Adresse de "mon" écran OLED sur le bus i2c (généralement égal à 0x3C ou 0x3D)
Adafruit_SSD1306 ecranOLED(nombreDePixelsEnLargeur, nombreDePixelsEnHauteur, &Wire, brocheResetOLED);
// ================
// Image à afficher
// ================
#define largeurDeLimage 128 // Largeur de l'image à afficher, en pixels
#define hauteurDeLimage 64 // Hauteur de l'image à afficher, en pixels
const unsigned char imageAafficher [] PROGMEM = {
// Logo SPACE FLAN (image BITMAP / LCD Assistant / Editeur de texte / https://passionelectronique.fr/ecran-oled-i2c-arduino/)
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x03, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xf0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc4, 0x73, 0x83, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0e, 0x77, 0x03, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xef, 0x06, 0xf7, 0x39, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x06, 0x63, 0xff, 0x30, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x26, 0x73, 0xff, 0xe0, 0xe4, 0x3f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xe6, 0xff, 0xff, 0xe6, 0x67, 0x1f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xec, 0xff, 0xff, 0xe6, 0x67, 0x87, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0xcc, 0xff, 0xff, 0xfe, 0x77, 0xe3, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0x9f, 0xcc, 0xff, 0xff, 0xfe, 0x33, 0xf1, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xd9, 0xff, 0xff, 0xfe, 0x33, 0xfc, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0x99, 0x7f, 0xff, 0xfe, 0x33, 0xfe, 0x7f, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xfc, 0xff, 0x99, 0x7f, 0xff, 0xff, 0x3b, 0xff, 0x3f, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xf9, 0xff, 0x9a, 0x7f, 0xff, 0xf9, 0x19, 0xff, 0x1f, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xf3, 0xff, 0xb2, 0x77, 0xff, 0x79, 0x19, 0xff, 0x9f, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xf3, 0xff, 0x32, 0x67, 0xff, 0x39, 0x1d, 0xff, 0xcf, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xe7, 0xff, 0x32, 0xe7, 0xdf, 0x39, 0x9d, 0xff, 0xef, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xcf, 0xff, 0x74, 0xe7, 0xdf, 0x3d, 0x8c, 0xff, 0xe7, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xcf, 0xfe, 0x64, 0xe7, 0xdf, 0x3d, 0x8c, 0xff, 0xf7, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xdf, 0xfe, 0x64, 0xe7, 0xdf, 0x3c, 0x8e, 0xff, 0xf3, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x9f, 0xfe, 0x64, 0xe7, 0xdf, 0x3c, 0x86, 0x7f, 0xf3, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x9f, 0xfc, 0xed, 0xef, 0xdf, 0xbc, 0xc6, 0x7f, 0xf9, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xbf, 0xfc, 0xc9, 0xcf, 0xdf, 0xbc, 0xc7, 0x3f, 0xf9, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x3f, 0xf1, 0xc9, 0xcf, 0x9f, 0x9e, 0xc7, 0x1f, 0xf9, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x3f, 0xe3, 0xc9, 0xcf, 0x9f, 0x9e, 0xc3, 0x8f, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7f, 0xc7, 0xdb, 0xcf, 0x9f, 0x9e, 0x63, 0xe7, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7f, 0x8f, 0x93, 0xcf, 0x9f, 0x9e, 0x63, 0xf3, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7f, 0x1f, 0x93, 0xcf, 0x9f, 0x9e, 0x63, 0xf9, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x93, 0xdf, 0x9f, 0x9e, 0x63, 0xfc, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7e, 0x7f, 0xb7, 0xdf, 0x9f, 0x9f, 0x73, 0xfc, 0xfd, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7c, 0xff, 0xa7, 0x9f, 0x9f, 0x9f, 0x33, 0xfe, 0x7d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7c, 0xff, 0x87, 0x9f, 0x9f, 0x9f, 0x33, 0xfe, 0x7d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x79, 0xff, 0x87, 0x9f, 0x9f, 0x9f, 0x33, 0xff, 0x3d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x79, 0xff, 0xe7, 0x9f, 0x9f, 0xdf, 0x23, 0xff, 0x3d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x7b, 0xff, 0xe7, 0x9f, 0x9f, 0xdf, 0x07, 0xff, 0x9d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x73, 0xff, 0xe7, 0xbf, 0x9f, 0xdf, 0x8f, 0xff, 0x9d, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x33, 0xff, 0xe3, 0x3f, 0x9f, 0xcf, 0x9f, 0xff, 0xc9, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x87, 0xff, 0xf0, 0x3f, 0x9f, 0xcf, 0x3f, 0xff, 0xc1, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xfc, 0x3f, 0x9f, 0xcc, 0x3e, 0x3f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf2, 0x7f, 0x9f, 0x9f, 0xc0, 0x7c, 0x9f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0xff, 0xc0, 0x0f, 0x01, 0xfc, 0xcf, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0x8f, 0xe0, 0x00, 0x3f, 0xee, 0x67, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0x8f, 0xfd, 0xe0, 0x7f, 0xc3, 0x37, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0x27, 0xff, 0xff, 0xff, 0x93, 0xb3, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0x64, 0x7f, 0xff, 0xfb, 0x99, 0x99, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xfe, 0xe4, 0x69, 0x3f, 0xff, 0xcb, 0xdd, 0xcc, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xfe, 0x0c, 0x0b, 0x3c, 0x47, 0x89, 0xcc, 0xe6, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0x1c, 0x13, 0x30, 0xc7, 0x9d, 0xec, 0x77, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xf3, 0x73, 0xdf, 0x9c, 0xe0, 0x73, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0xe7, 0x67, 0xdf, 0xdc, 0xe3, 0x7f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0xe2, 0x6f, 0xdf, 0xc6, 0xe3, 0x3f, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0xe0, 0xcf, 0xdf, 0xc6, 0x7b, 0xbf, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0x4f, 0xcf, 0xce, 0x79, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xcc, 0xcf, 0xc7, 0xcf, 0x7d, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdd, 0xcf, 0xc7, 0xef, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0xe7, 0xdf, 0xef, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe7, 0xdf, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf1, 0xc7, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0xc7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
};
// Array of all bitmaps for convenience. (Total bytes used to store images in PROGMEM = 1040)
const int epd_bitmap_allArray_LEN = 1;
//******************************** Routine pour afficheur LCD **************************
#if (SSD1306_LCDHEIGHT != 64)
#endif
// ANNEAU RING LED 12 PIXELS
#include
#define PIN 7
// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB Pixels are wired for GRB bitstream (most NeoPixel products)
// NEO_RGB Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
Adafruit_NeoPixel strip = Adafruit_NeoPixel(12, PIN, NEO_GRB + NEO_KHZ800);
// Module sonore wtv020m01
// boolean déclare une variable de type binaire
boolean buttonWasUp = true;
boolean ledEnabled = false;
const int clockPin = 6; // clockpin sur la broche 6
const int dataPin = 9; // datapin sur la broche 9
const int resetPin = 3; // resetpin sur la broche 3
const unsigned int VOLUME_7 = 0xFFF7; //unsigned = variable entière non signée
const unsigned int PLAY_PAUSE = 0xFFFE;
const unsigned int STOP = 0xFFFF;
void setup()
{
Serial.begin(9600); //Initialise la communication entre le PC et Arduino
// Initialisation de l'écran OLED
if(!ecranOLED.begin(SSD1306_SWITCHCAPVCC, adresseI2CecranOLED))
while(1); // Arrêt du programme (boucle infinie) en cas d'échec de l'initialisation
// Affichage d'une image au centre de l'écran
ecranOLED.clearDisplay(); // Effaçage de la mémoire tampon de l'écran OLED
ecranOLED.drawBitmap(
(ecranOLED.width() - largeurDeLimage ) / 2, // Position de l'extrême "gauche" de l'image (pour centrage écran, ici)
(ecranOLED.height() - hauteurDeLimage) / 2, // Position de l'extrême "haute" de l'image (pour centrage écran, ici)
imageAafficher,
largeurDeLimage,
hauteurDeLimage,
WHITE); // "couleur" de l'image
ecranOLED.display(); // Transfert de la mémoire tampon à l'écran OLED, pour affichage
{
// LedPin en sortie
pinMode(ledPin, OUTPUT);
// Bouton poussoir en entrée
pinMode(buttonPin, INPUT);
}
{
strip.begin();
strip.setBrightness(255); //adjust brightness here, maximum à 255
strip.show(); // Initialize all pixels to 'off'
}
pinMode(clockPin, OUTPUT);
pinMode(dataPin, OUTPUT);
pinMode(resetPin, OUTPUT);
digitalWrite(clockPin, HIGH); // aucune différence si je le met en HIGH ou LOW
digitalWrite(dataPin, LOW);
// reset the module (si les 2 lignes dessous retirer le son ne s'allume qu'une fraction de secondes)
digitalWrite(resetPin, HIGH);
delay(100);
sendCommand(VOLUME_7); // Empéche le son de se répèter, si enlevé le son est en boucle
}
void loop()
{
// Programme de lumière LED de 12 secondes
colorWipe(strip.Color(255, 255, 255), 84); // Blanc
colorWipe(strip.Color(255, 0, 0), 84); // Rouge
colorWipe(strip.Color(255, 255, 255), 84); // Blanc
colorWipe(strip.Color(255, 0, 0), 84); // Rouge
colorWipe(strip.Color(255, 255, 255), 84); // Blanc
colorWipe(strip.Color(255, 0, 0), 84); // Rouge
colorWipe(strip.Color(255, 255, 255), 84); // Blanc
colorWipe(strip.Color(255, 0, 0), 84); // Rouge
colorWipe(strip.Color(255, 255, 255), 84); // Blanc
colorWipe(strip.Color(255, 0, 0), 84); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(255, 255, 255), 5); // Blanc
colorWipe(strip.Color(255, 0, 0), 5); // Rouge
colorWipe(strip.Color(0, 0, 0), 5); // Eteindre
while (1);
}
// Remplir les points l’un après l’autre avec une couleur (si supprimé, système de points ne fonctionne plus)
void colorWipe(uint32_t c, uint8_t wait)
{
for(uint16_t i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, c);
strip.show();
delay(wait);
}
}
uint32_t Wheel(byte WheelPos) // je ne sais pas à quoi ça sert
{
// lecture son "0000.wav"
sendCommand(0x0001);
}
void sendCommand(int addr) {
digitalWrite(clockPin, LOW);
delay(2);
for (int i=15; i>=0; i--)
{
delayMicroseconds(50);
if((addr>>i)&0x0001 >0)
{
digitalWrite(dataPin, HIGH);
//Serial.print(1);
}
else
{
digitalWrite(dataPin, LOW);
// Serial.print(0);
}
delayMicroseconds(50);
digitalWrite(clockPin, HIGH);
delayMicroseconds(50);
if(i>0)
digitalWrite(dataPin, LOW);
else
digitalWrite(dataPin, HIGH);
delayMicroseconds(50);
if(i>0)
digitalWrite(clockPin, LOW);
else
digitalWrite(clockPin, HIGH);
delay(20);
}
} - NOMADE l'horloge pédagogique pour les dyslexiques ! + (- Découpe laser - Cutter - Papier ponce grain moyen - Lime (sauge ou ronde de préférence) - Peinture de couleur foncées (de cotre choix) - Colle à bois - Paraffine ou savon)
- Comment créer une lampe carton + (-Collez les anneaux de 480mm de dia. ext. … -Collez les anneaux de 480mm de dia. ext. et 470mm de dia. int. les uns sur les autre jusqu’à obtenir une épaisseur d’une dizaine de cartons (en fonction de l’épaisseur désirée). -Ces anneaux constituent le profil de la lampe. En cas de difficultés, la photo ci-contre peut éventuellement vous guider.ci-contre peut éventuellement vous guider.)
- Comment créer une lampe carton + (-Collez les anneaux de 480mm de dia. ext. … -Collez les anneaux de 480mm de dia. ext. et 470mm de dia. int. les uns sur les autre jusqu’à obtenir une épaisseur d’une dizaine de cartons (en fonction de l’épaisseur désirée). -Ces anneaux constituent le profil de la lampe. En cas de difficultés, la photo ci-contre peut éventuellement vous guider.ci-contre peut éventuellement vous guider.)
- Jeu puissance 4 fait en bois + (Après avoir tout découpé, vérifier que les différentes parties s’emboîtent correctement. Modifier le .Gcode si nécessaire.)
- TomBot + (- Souder deux jumpers aux deux pattes arge … - Souder deux jumpers aux deux pattes argentées (un par patte) de l'interrupteur. Attention, la dorée est pour la LED (figure 6). - Souder l'un des fils de l'interrupteur au fil noir du support de pile 9v (figure 6). - Souder un troisième jumper au fil rouge du support de pile 9v (figure 6). - Connecter le jumper de l'interrupteur libre à l'un des GND de l'Arduino et celui du support de pile à VIN (figure 7 et 8). - Brancher la pile 9v et mettre l'interrupteur sur la position on. Vérifier que les LEDs de l'Arduino s'allument bien et éteindre l'interrupteur.'allument bien et éteindre l'interrupteur.)
- TomBot + (- Souder deux jumpers aux deux pattes arge … - Souder deux jumpers aux deux pattes argentées (un par patte) de l'interrupteur. Attention, la dorée est pour la LED (figure 6). - Souder l'un des fils de l'interrupteur au fil noir du support de pile 9v (figure 6). - Souder un troisième jumper au fil rouge du support de pile 9v (figure 6). - Connecter le jumper de l'interrupteur libre à l'un des GND de l'Arduino et celui du support de pile à VIN (figure 7 et 8). - Brancher la pile 9v et mettre l'interrupteur sur la position on. Vérifier que les LEDs de l'Arduino s'allument bien et éteindre l'interrupteur.'allument bien et éteindre l'interrupteur.)
- Marmite norvégienne + ('''Remarque :''' Votre petite boite doit ê … '''Remarque :''' Votre petite boite doit être plus haute que le plat d'au minimum 1 cm et être plus large de 4 cm. 1) Découper à l'aide d'une scie à bois ou d'une scie sauteuse les planches en fonction des mesures précédemment calculées. 2) Assembler les planches ensembles à l'aide de clous et d'un marteau. '''Planches obtenues pour la petite caisse''' : - 2 planches (hauteur du plat+1cm)x (longueur du plat+4cm) - 2 planches (hauteur du plat+1cm)x (largeur du plat+4cm) - 1 ou plusieurs planches (largeur du plat + 4cm)x(longueur du plat+4cm)geur du plat + 4cm)x(longueur du plat+4cm))
- 2B2T + (1- prenez des tringles de rideau ensuite coupez les a 10,5 cm 2- tordez les A environ 45° pour que cela ressemble a des lampadaires 3- enfoncez les sur le bord de la route)
- PP Shredder Basic + (1/2" Socket wrench 11/16" Socket" 6mm Allen/Hex Wrench Locking Pliers Adjustable pliers Metal File Screwdriver <br/>)
- Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
- Biped dancing robot + (3D .stl files here: http://www.thingiverse.com/thing:1378605 Find a way to 3d print the parts, they are designed for no supports so is very easy to print with 20% infill and 0.2mm resolution.)
- Spaceship Astrokick + (3D-Print the several parts of the spaceship. This is going to take several hours per part. If your 3D printer is not big enough to place all the part at once, you can do it in two prints. <br/> *Top part: 10h *Bottom part: 10h *Dome part: 1h)
- Jardin Vertical - Made in Albilab - Concours Castorama + (<div class="icon-instructions caution-i … Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
- Jardin Vertical - Made in Albilab - Concours Castorama + (<div class="icon-instructions caution-i … Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
- Clay-pot-irrigation system (Aranya Agricultural Alternatives method) + ([[Tree planting (Aranya Agricultural Alternatives method)]])
- Clay-pot-irrigation system (Aranya Agricultural Alternatives method) + ([[Tree planting (Aranya Agricultural Alternatives method)]])
- Comet Attack + (Les deux éléments à assembler sont la comè … Les deux éléments à assembler sont la comète et le mât. #Prendre la cordelette et brûlez les deux extrémités pour éviter que ça ne s'effile . #Prendre une des extrémités de la cordelette et faire une boucle d'environ 8mm de diamètre avec un nœuds de chaise. #Placer la boucle sur la pointe du mât. Il faut passer la boucle entre les deux rondelles. La taille de la boucle doit être assez petite pour ne pas se retire trop facilement des rondelles. #Visser le mât dans l'insert du plateau. #Passer la comètes dans l'autre extrémité de la cordelette et prendre la mesure pour que la comète ne touche juste pas le plateau quand elle est contre le mât. #Faire un nœud pour bloquer la comète. #Placer les quille sur les carrés colorés. #C'est le moment de s'amuser !és colorés. #C'est le moment de s'amuser !)
- Atelier nichoir + (<div class="icon-instructions info-icon … *Tester vos paramètre de découpe, de marquage et de gravage dans du contre-plaqué de 6mm. **Suivre la [https://wikifab.org/images/c/c0/Atelier_nichoir_legende_plan_nichoir.svg][https://wikifab.org/images/1/14/Atelier_nichoir_legende_plan_nichoir2.svg Atelier_nichoir_legende_plan_nichoir2.svg] pour paramétrer la laser *Découper le document "[https://wikifab.org/images/c/c2/Atelier_nichoir_2020.03.23_plan_nichoir.svg Atelier_nichoir_2020.03.23_plan_nichoir.svg]" *Garder la contre forme de la plaque Atelier_nichoir_2020.03.23_plan_nichoir.svg]" *<u>Garder la contre forme de la plaque</u>)
- Bentolux - Ruines au clair de lune + (<u>Matériaux :</u>
*MDF 3mm … Matériaux :
*MDF 3mm ;
*Colle (à bois par exemple) ;
*Pâte auto-durcissante pour sculpture ;
*Mousse de modélisme ;
*Peintures acrylique ;
Électronique :
*1 carte Arduino Uno ;
*câbles de prototypage mâle-mâle et mâle-femelle ;
*2 bornes à leviers Wago ;
*1 LED 8mm ;
*1 potentiomètre ;
*1 capteur météo BME280 ;
*1 écran Oled SSD1306 ;
*1 anneau de 12 LEDS Neopixel;
*8 leds diamètre 1,8mm ;
*8 résistances ;
*un servomoteur ;
Machines :
*Découpeuse laser ;
*Imprimante 3D
Autres outils :
*fer à souder ;
*cutter ;
*pince coupante ;
*pince à dénuder ;
*pistolet à colle ;
*enduit de rebouchage pour les finitions ;
*peintures ;
*pinceaux ;
*outils de sculpture ;
Logiciels :
*IDE Arduino (programmation) ;
*Inkscape (modélisation 2D) ;
*Logiciel de modélisation 3D (type Rhino) ;
*Cura (trancheur).
; *Inkscape (modélisation 2D) ; *Logiciel de modélisation 3D (type Rhino) ; *Cura (trancheur). <br/>) - Présentoir lumineux pour super héros et monuments découpés en mdf et pmma à partir de dessins d'enfants + (Je souhaitais ajouter une touche de couleu … Je souhaitais ajouter une touche de couleur à la scène avec un arc en ciel découpé en PMMA souple qui serait simplement posé sur le présentoir. Pour cela on utilise un plug in pour inkscape appelé [https://www.thingiverse.com/thing:203940 "living hinges"] Après pas mal de tests, pour du PMMA 3mm les réglages suivants du plug in sont les plus adaptés : cut length : 19 gam length : 2 separation distance : 2. Des bandes de 20 mm x 300 mm sont découpées dans du pmma de 3mm de quatre couleurs (bleu, vert, jaune, orangé) et ajourées (fichier : arcenciel_supersoleil.svg) comme figuré sur l'image 1. On découpe également super soleil dans les trois couleurs rouge, orange, jaune ainsi que la pince qui servira à épingler super soleil à l'arc en ciel, solidarisera ce dernier et permettra à super soleil de coulisser le long de l'arc en ciel (PMMA 10 mm). Chaque bande de l'arc en ciel doit être légèrement plus courte que la précédente. On coupe donc environ la bande jaune de 1 cm, la verte de 2 cm, la bleue de 3 cm. (image 3) On teste ensuite le placement de l'arc en ciel sur le présentoir. Super soleil viendra s'épingler ensuite dessous.soleil viendra s'épingler ensuite dessous.)
- Présentoir lumineux pour super héros et monuments découpés en mdf et pmma à partir de dessins d'enfants + (Je souhaitais ajouter une touche de couleu … Je souhaitais ajouter une touche de couleur à la scène avec un arc en ciel découpé en PMMA souple qui serait simplement posé sur le présentoir. Pour cela on utilise un plug in pour inkscape appelé [https://www.thingiverse.com/thing:203940 "living hinges"] Après pas mal de tests, pour du PMMA 3mm les réglages suivants du plug in sont les plus adaptés : cut length : 19 gam length : 2 separation distance : 2. Des bandes de 20 mm x 300 mm sont découpées dans du pmma de 3mm de quatre couleurs (bleu, vert, jaune, orangé) et ajourées (fichier : arcenciel_supersoleil.svg) comme figuré sur l'image 1. On découpe également super soleil dans les trois couleurs rouge, orange, jaune ainsi que la pince qui servira à épingler super soleil à l'arc en ciel, solidarisera ce dernier et permettra à super soleil de coulisser le long de l'arc en ciel (PMMA 10 mm). Chaque bande de l'arc en ciel doit être légèrement plus courte que la précédente. On coupe donc environ la bande jaune de 1 cm, la verte de 2 cm, la bleue de 3 cm. (image 3) On teste ensuite le placement de l'arc en ciel sur le présentoir. Super soleil viendra s'épingler ensuite dessous.soleil viendra s'épingler ensuite dessous.)
- Bentolux - BentoGhooost + (= Fabrication 3ème étage = 1. Fabrication … = Fabrication 3ème étage = 1. Fabrication à la découpeuse laser. * Plan à télécharger : [https://wikifab.org/images/d/df/BentoGhost_volume1.svg BentoGhost_volume1.svg] (clic droit / enregistrer le fichier sous) 2. Découpage et collage des morceaux * Bien penser à supprimer les écritures permettant d'identifier les faces avant la découpe * Bois utilisé : contreplaqué peuplier 3 mm * Réglages utilisés sur la PerezCamp 140 W ** puissance max : 40 % ** puissance min : 30 % ** vitesse : 40 mm / s * L'assemblage est expliqué avec les photos BentoGhost02 à BentoGhost04 ** Coller les éléments avec de la colle à bois * ''Le plancher qui supporte le mécanisme est décrit à l'étape suivante'' 3. Découpe des fantômes, dans du plexiglas 3 mm * Plan à télécharger : [https://wikifab.org/images/b/b9/BentoGhost_fantomes.svg BentoGhost_fantomes.svg] (clic droit / enregistrer le fichier sous) * Remarque : les 4 fantômes découpés dans la boite sont en haut de dessin, mais vous pouvez sélectionner ceux que vous voulez à partir du moment où ils sont de la même forme que ceux de la boîte * L'assemblage est expliqué avec les photos BentoGhost05 à BentoGhost07 ** Remarque : les fantômes peuvent également être collés à la colle à bois. Il faut bien les nettoyer tout de suite pour ne pas avoir de résidus de colle sur le plexiglas.voir de résidus de colle sur le plexiglas.)
- Thermostat control activity v12 + (== What you need[https://docs.google.com/d … == What you need[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.kft4zwyruhwh ?] == * A pair of scissors * An old shoe box * Pastels / glue / colored sheets * A small fan How to create the environment As in the previous activity, the children have a box that will simulate the home environment. The moderator can leave room for children to decorate their boxes and express their creativity. Even in this case, children will have to cut the smaller sides: on one side they will be able to look into the box, on the other they can insert a small fan. The device, inserted in the box, will detect if there is the right temperature. By accessing the fan, the environment will become colder, although there is no need. Thanks to the signaling of the device, children will understand that the fan can be turned off. == How to build the box[https://docs.google.com/document/d/1HVWFDdyiLj6ORTMYcQF-VPyJCPGuPzeTj_FaKip4pS4/edit#heading=h.rocl9tvc6md5 ?] == * We take a box of shoes that we no longer use; * With the help of a pair of scissors with a rounded tip, let's cut one of the shorter sides of the box. From here we could observe inside the box itself what will be simulated; * Let's cut the other minor side in the same way. From this we will insert the small fan; * By inserting the device inside the box, we created our miniature room and we are ready for the experiment. room and we are ready for the experiment.)
- Implementing Web Server on ESP32 + (=== What is a Web Server? === A web server … === What is a Web Server? === A web server is a software application that serves web pages to users. When a user requests a web page, the web server processes the request and sends the requested page back to the user’s browser. This forms the backbone of data communication on the World Wide Web. === What is ESP32? === The ESP32 is a series of low-cost, low-power systems on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor and includes built-in antenna switches, an RF balun, a power amplifier, a low-noise receiver amplifier, filters, and power management modules. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming.e demanding tasks such as music streaming.)
- Biodigesteur domestique + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
- Biodigesteur domestique + (==== Dimensionnement ==== Pour une bonne d … ==== Dimensionnement ==== Pour une bonne digestion, à 38°C, la matière organique doit passer 30 jours dans le biodigesteur. Nous allons dimensionner le volume du digesteur en fonction des apports réguliers et de cette durée. Prenons un exemple : l’apport périodique est de 2 litres par jour, la matière devant rester au moins 30 jours, il faut un digesteur de 60 litres minimum. ==== Réalisation ==== C’est dans le digesteur qu’a lieu la dégradation bactérienne. Pour avoir une production de méthane il faut des bactéries méthanogènes. Celle-ci se développent en absence d’oxygène, on parle d’un milieu anaérobique. Pour priver la matière organique d’oxygène il suffit de l’immerger dans l’eau. * Faire deux trous en vis-à-vis dans le bidon digesteur. Ils doivent être au tiers de la hauteur, * Insérer un passe-paroi matière préalablement graissé dans chacun des deux trous, * Graisser l’intérieur des passe-parois matière, * Positionner une plaque à l’intérieur du digesteur faisant la séparation entre l’entrée et la sortie. En laissant passer la matière au-dessous et au-dessus elle augmente le parcours de la matière et donc le temps de digestion minimum, * Faire un trou dans l’opercule du couvercle pour installer un passe paroi gaz, * Installer un passer un passe-paroi gaz au centre de l’opercule d’étanchéité du couvercle. Du téflon sur les filets et un joint plat de chaque côté permettent d’étanchéifier le montage, * Enduire de graisse la collerette de l’opercule et refermer le couvercle, la graisse fait l’étanchéité, le couvercle maintient la pression, * Installer une vanne après le passe-paroi gaz.taller une vanne après le passe-paroi gaz.)
- PP Extruder Pro + (==== Tools ====
1/2" Socket
==== Parts == … ==== Tools ====
1/2" Socket
==== Parts ====
2x 1000mm 4080 extrusion
4x 300mm 4040 extrusion
40x t-nuts
22x M8x20 bolts
22x M8 Washers
12x Corner Brackets
==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)uts. (as seen in the right two beams in image 3)) - Robot "ABC" in wood + (<div class="mw-translate-fuzzy"> Let's start with the base by adding support with it's stack connected to the 3 green LEDs. </div> <div class="mw-translate-fuzzy"> Take 4 screws M4 insert them in the 4 holes then fix 1 nut on each screws. </div>)
- Poser un carrelage sol + (Vous avez au sol une ligne de carreaux par … Vous avez au sol une ligne de carreaux partant du seuil de porte et se terminant près du mur du fond de la pièce. Faites un repère au crayon sur la droite perpendiculaire au niveau de l’arête du dernier carreau. A l’aide de l’équerre, tracez une droite perpendiculaire sur ce repère jusqu’au mur droit de votre pièce puis une autre jusqu’au mur gauche. Terminez la pose des carreaux à blanc sur cette perpendiculaire en prenant soin de bien les aligner au trait.prenant soin de bien les aligner au trait.)
- Chaise en bois pour enfant + (Afin de déterminer les dimensions de cette … Afin de déterminer les dimensions de cette chaise pour enfant, je me suis basé sur la norme [https://www.manutan-collectivites.fr/guides-achat/guide-tailles-tables-chaises-scolaires.html NF EN 1729-1] des chaises pour enfants, ainsi que [http://www.ideesmaison.com/Le-Mag-de-la-Maison/Fiches-bricos/Bois/Normes-entretien-divers/Normes-dans-le-bois/Chiffres-pratiques.html les normes des dimensions du mobilier] des meubles pour adultes. La norme des chaises pour enfants ne donnant pas toutes les dimensions, j'ai utilisé la seconde ressource et calculé les dimensions proportionnelles en me basant sur les recommandation de la norme NF EN 1729.les recommandation de la norme NF EN 1729.)
- Etabli compact. + (Afin de pouvoir facilement s'y retrouver, … Afin de pouvoir facilement s'y retrouver, notez la position des plaques avec leur noms : * planches de medium : - 15*800*485 -> coté gauche - 15*800*500 -> coté droit - 15*800*570 -> arrière - 15*800*560 -> porte - 15*570*410 (x2) -> intérieur - 15*570*470 : sol * planche de lattes : - 22*500*600 -> surface de travail supérieure - 22*500*800 -> surface de travail latéral ste à inverser coté droit et gauche, et mettre les charnières de la porte du bon coté.</div> </div>)
- Etabli compact. + (Retourner le montage sur le plan de travail supérieur afin de pouvoir le monter facilement. Prendre 6 équerres et 24 vis 15mm et fixer la plaque au reste du montage en plaçant 2 équerres sur chaque arête.)
- Manipulate the CubePro Trio + (After downloading the program and installing it using it's serial number and activating it, we must launch the program.)
- Démarrage CNC MEKANIKA + (Allumer la multiprise L'écran s'allume Appuyer ensuite sur le bouton ON/OFF situé à l’arrière du boitier électronique. L'ordinateur démarre et affiche le système. Démarrer Planet CNC)
- Best Method to Upload Apple Music to Dropbox + (Apple Music songs are protected. Fortunate … Apple Music songs are protected. Fortunately, with today's technology, you are just a few clicks away to get all protection-free music files by a tool such as TunesKit [https://www.tuneskit.com/audio-converter/ Apple Music Converter], which is a top-notch converting tool in the market. It supersedes other tools by integrating the fast and lossless converting technology plus multiple formats and device compatibility so as to promise the ultimate user experience. After the conversion, you can also [https://www.tuneskit.com/apple-music-tips/transfer-apple-music-to-google-drive.html play Apple Music on Google Drive] or other clouds easily.lay Apple Music on Google Drive</u>] or other clouds easily.)
- Mobi-doc + (Assemblez le cadre en vous assurant de la correspondance des encoches.)
- Mobi-doc + (Assemblez le cadre en vous assurant de la correspondance des encoches.)
- How to Play Spotify to Yoto Player without Premium + (<nowiki>Once the Spotify music you w …
Once the Spotify music you want for your kids is downloaded, please follow the below steps to help your kids use the Yoto Player with Spotify music. ' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app.<br /><br /><br/></nowiki>)
'''Step 1.''' Download and enter into the Yoto app on your tablet or mobile.
'''Step 2.''' From the bottom of the screen, choose the ''''Library'''' tab.
'''Step 3.''' Tap on the top-right ''''+'''' icon of the screen.
'''Step 4.''' Select ''''Add Audio'''' from the options.
'''Step 5.''' Choose the downloaded Spotify audio files you want to upload from your device's file browser.
'''Step 6.''' Name the audio file and select an appropriate category (e.g., music, story, etc.).
'''Step 7.''' Tap ''''Save'''' to upload the audio file to your Yoto library on the app.
'''Step 8.''' Connect your device and Yoto Player to the same Wi-Fi network. Then you can play Spotify music directly from the Yoto app. - Fusée à soufflet + (Pour constituer le kit, il faut couper le … Pour constituer le kit, il faut couper le tube PVC en morceaux de différentes longueurs. *Un morceau de 80 cm, qui sera relié à la bouteille. *2 morceaux de 30 cm, l'un pour guider la fusée, l'autre pour les confectionner. *Le dernier morceau, la chute, qui servira de support à l'ensemble (une fois la collerette coupée)l'ensemble (une fois la collerette coupée))
- Fusée à soufflet + (Pour constituer le kit, il faut couper le … Pour constituer le kit, il faut couper le tube PVC en morceaux de différentes longueurs. *Un morceau de 80 cm, qui sera relié à la bouteille. *2 morceaux de 30 cm, l'un pour guider la fusée, l'autre pour les confectionner. *Le dernier morceau, la chute, qui servira de support à l'ensemble (une fois la collerette coupée)l'ensemble (une fois la collerette coupée))
- Poser du carrelage mural + (Alignez vos tasseaux sur cette ligne, percez directement au travers puis fixez-les à l’aide de chevilles adaptées à la nature de vos murs.)
Français
English
Deutsch
Español
Italiano
Português