Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• Copier Youtube  + (<nowiki>Installez tous les outils né … Installez tous les outils nécessaires...
  
  
  sudo wget https://yt-dl.org/downloads/latest/youtube-dl -O /usr/local/bin/youtube-dl
  
  
  
  

  sudo chmod a+rx /usr/local/bin/youtube-dl

  
  sudo chown $USER /usr/local/bin/youtube-dl
  
  
  
  
  
  
  https://github.com/darktrojan/openwith
  
  Activez OpenWith sur votre navigateur
  
  sans oublier de lancer son script d’installation.
  
  chmod u+x open_with_linux.py
  
  ./open_with_linux.py install
  
  
  cet outil vous permettra d'envoyer le lien de la page que vous visitez au programme extérieur youtube-dl
  
  Configurez le plugin avec les commandes pour la video et l'audio (comme sur les copies d'écran). Modifiez les options de copie à votre convenance.
  
  '''/usr/local/bin/youtube-dl -o /home/you/Vidéos/%(title)s.%(id)s.%(ext)s'''
  
  '''/usr/local/bin/youtube-dl -x --audio-format mp3 -o '/home/you//MP3/%(title)s.%(id)s.mp3''''
  
  
  Adapter le chemin où écrire vos fichiers à votre propre cas.ez les options de copie à votre convenance.<br /><br />'''/usr/local/bin/youtube-dl -o /home/you/Vidéos/%(title)s.%(id)s.%(ext)s'''<br /><br />'''/usr/local/bin/youtube-dl -x --audio-format mp3 -o '/home/you//MP3/%(title)s.%(id)s.mp3''''<br /><br /><br />Adapter le chemin où écrire vos fichiers à votre propre cas.</nowiki>)
• Copier Youtube  + (<nowiki>Installez tous les outils né … Installez tous les outils nécessaires...
  
  
  sudo wget https://yt-dl.org/downloads/latest/youtube-dl -O /usr/local/bin/youtube-dl
  
  
  
  

  sudo chmod a+rx /usr/local/bin/youtube-dl

  
  sudo chown $USER /usr/local/bin/youtube-dl
  
  
  
  
  
  
  https://github.com/darktrojan/openwith
  
  Activez OpenWith sur votre navigateur
  
  sans oublier de lancer son script d’installation.
  
  chmod u+x open_with_linux.py
  
  ./open_with_linux.py install
  
  
  cet outil vous permettra d'envoyer le lien de la page que vous visitez au programme extérieur youtube-dl
  
  Configurez le plugin avec les commandes pour la video et l'audio (comme sur les copies d'écran). Modifiez les options de copie à votre convenance.
  
  '''/usr/local/bin/youtube-dl -o /home/you/Vidéos/%(title)s.%(id)s.%(ext)s'''
  
  '''/usr/local/bin/youtube-dl -x --audio-format mp3 -o '/home/you//MP3/%(title)s.%(id)s.mp3''''
  
  
  Adapter le chemin où écrire vos fichiers à votre propre cas.ez les options de copie à votre convenance.<br /><br />'''/usr/local/bin/youtube-dl -o /home/you/Vidéos/%(title)s.%(id)s.%(ext)s'''<br /><br />'''/usr/local/bin/youtube-dl -x --audio-format mp3 -o '/home/you//MP3/%(title)s.%(id)s.mp3''''<br /><br /><br />Adapter le chemin où écrire vos fichiers à votre propre cas.</nowiki>)

• Petit bras robotique  + (Dans mBlock ouvrez un nouveau dossier. N'o … Dans mBlock ouvrez un nouveau dossier. N'oubliez pas les étapes : - connecter le câble usb après branchement - connecter > usb - téléverser le microporgramme - cliquer le drapeau vert Pour ceci on cré une variable, position. Changez la variable quand on presse la flèche droite. De combien de degrés est-ce qu'on peut changer la position du moteur ?ce qu'on peut changer la position du moteur ?)
• PP Sheetpress  + (====Tools==== same as above ====Parts==== … ====Tools==== same as above ====Parts==== 36 corner brackets ====Steps==== # Prepare your parts. Each "cell" will require 4 brackets, 16 M8Bolts, and 16 washers # Starting with the 4 corners of the ''entire assembly'', attach the corner brackets and tighten the bolts only to finger-tight. # Next attach the 920 beam ends to the outer perimeter. # Next, attach the inner beams in place. Ensure that all beams are equally spaced. (remember that the 2 interior beams are shorter though)
  interior beams are shorter though) <br/>)
• Mobile renewable energy platform on a cargo bike  + ('''''charging''''' - input : DC power for … '''''charging''''' - input : DC power for 5 generation bikes power 5*100W - peak 5*200 voltage 48V current 30A '''''conversion and output''''' - output AC : power for an open-air cinéma, projector and active speakers - output DC : power for a 3D printer power 700W voltage 220AC current 1A '''''battery''''' - buffer : DC supercapacitor power 1000W voltage 48V current 30A - peak 40A1000W voltage 48V current 30A - peak 40A)
• Bento Red Room  + ('''3D Printing''' * Filament: PVA and ABS … '''3D Printing''' * Filament: PVA and ABS * Wood '''Electronic''' * 1 Arduino Uno cards * male-male and male-female prototyping cables * LCD SSD1306 128 x 64 * 1 LED 8mm * 2 ring of 12 LEDs * 1 potentiometer * 1 BME280 weather sensor * 1 switch * 1 x 5V power supply * 220 and 10000 Ohms resistors * 3 x servomotors * Buzzer === Tools === '''Machines''' * 3D printer * Découpeur de laser '''Software''' * Tinkercad, Microsoft 3D builder, Blender * Cura Ultimaker * Arduino '''Prototyping''' * soldering iron * cutting pliers * wire stripper * glueon * cutting pliers * wire stripper * glue)
• Bento Night Sky  + ('''3D Printing''' *Filament: PVA and ABS … '''3D Printing''' *Filament: PVA and ABS *Wood '''Electronic ''' *1 Arduino Uno cards *male-male and male-female prototyping cables *LCD SSD1306 128 x 64 *1 LED 8mm *2 ring of 12 LEDs *1 potentiometer *1 BME280 weather sensor *1 switch *1 x 5V power supply *220 and 10000 Ohms resistors *3 x servomotors *Buzzer ===Tools=== '''Machines''' *3D printer *Découpeur de laser '''Software ''' *Tinkercad, Microsoft 3D builder, Blender *Cura Ultimaker *Arduino '''Prototyping''' *soldering iron *cutting pliers *wire stripper *glue iron *cutting pliers *wire stripper *glue)
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• OpenReflex: 3D Printed Camera  + (1- Start by putting the two M3 hexagonal n … 1- Start by putting the two M3 hexagonal nuts in the holes provided for on the Body. It's a tight fit, so you'll need to push a bit. You can screw a screw from the other side for pull the nut. 2- Install the BackCover on its axis and insert the nut & bolt. The BackCover should fit nicely and rotate freely on its axis. Also set the BackShutter on his groove on the Body. 3- Put the UnwinderP2 and the UnwinderButton in place in the Cover. They should rotate, but not too much. 4- Set the Unwinder and the two FilmGuides in place in the Body. Put the Cover over all of this. You'll have to turn the UnwinderButton to align it with the Unwinder. Note : If the FilmGuide don't rotate on their axis it's not a problem. 5- Once everything is in place, put squared nuts in the columns and screw them in place through the Cover. 6- Algih the BackCover with the Cover and screw them together. Everything should fit in place, the UnwinderButton should make the Unwinder turn with some friction and the BackShutter should slide on its groove. All done ! For the Rewinder and the final light proofing we'll see this later. ;) final light proofing we'll see this later. ;))
• Laser cut Spirograph  + ( * Open a new document in tinkercad * Select view TOP * ''Switch to Orthographic view'' ''Always use Shift plus Right-click to move the workplane.'' ''Use the Mouse-wheel to zoom-in zoom-out.'' )
• Design your personal logo with Tinkercad  + ( * Open a new document in tinkercad * Sel … * Open a new document in tinkercad * Select view TOP * Switch to Orthographic view Always use Shift plus Right-click to move the workplace. Use the Mouse-wheel to zoom-in zoom-out. This tutorial aims to give suggestion on how to combine shapes, in order to create a logo using the tools that Tinkercad provides. No technical drawing skill is required. es. No technical drawing skill is required. )
• Open Workshop Setup/de  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Open Workshop Setup  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Open Workshop Setup  + ( * You need a space where you can work, so … * You need a space where you can work, so at least 8x bigger than your original workshop spot * use a corner of the room (about 2.0x1.0m Space minimum) * keep lights and accessebillity in mind * kreate an overview of tools and materials you have * start looking for a good sized plywood for your tools (big) and your small materials (small) * use a solid table as base for the construction (at least 90cm high and 70cm deep) * have a powerplug close to it * cut the wood sheets powerplug close to it * cut the wood sheets )
• Verser vos travaux dans le bien commun de l'humanité  + (Rendues célèbres par wikipedia, un des sit … Rendues célèbres par wikipedia, un des sites les plus consultés dans le monde, ces licences permettent rapidement et facilement de partager vos travaux, fichiers, modes d'emplois dans le bien commun. Pour cela, nous vous proposons de comprendre les licences proposées sur ce site, et les sigles correspondants : *'''CC''' = '''Creative Commons''' - mise dans le bien commun *'''BY'''='''Mention obligatoire du ou des auteurs''' (BY) *'''SA'''= '''Share Alike''' - réutilisation avec mêmes conditions de partage pour les copies et variantes et "adaptations" *'''NC'''=comme '''Non Commercial'''. Interdit l'usage commercial de la création. Permet par contre la conclusion de contrats de cession de droits au bénéfice des auteurs pour activer ces usages, tout en laissant le contenu partagé. *'''ND'''='''Non Derivative'''. Interdit la création de variantes et adaptations : et donc la création ne peut faire l'objet d'adaptations sans accord de l'auteur. Il existe aussi ici un [https://creativecommons.org/choose/?lang=fr outil en ligne d'affectation de licences creative commons] qui va vous indiquer la licence qui correspond à ce que vous avez choisi.
  rrespond à ce que vous avez choisi. <br/>)
• Tree planting (Aranya Agricultural Alternatives method)  + ( #If you use a bottle-irrigation system: # … #If you use a bottle-irrigation system: ##Loosen the cap to open the bottle-irrigation system, ##As you add water in the bottle, measure the amount of water added in the bottle-irrigation system: ###If the bottle was empty, increase the frequency of your examinations, ###If the bottle was not empty, reduce the frequency of your examinations; ##Tighten the cap to close the bottle-irrigation system; #If you use a clay-pot-irrigation system: ##Remove the clay plate from the clay pot to open the clay-pot-irrigation system, ##As you add water in the clay pot, measure the amount of water added in the clay-pot-irrigation system: ###If the clay pot was empty, increase the frequency of your examinations, ###If the clay pot was not empty, reduce the frequency of your examinations; ##Install the clay plate on the clay pot to close the clay-pot-irrigation system: #Else: ##If the moisture level is low, add water and increase the frequency of your examinations, ##If the moisture level is high, reduce the frequency of your examinations. reduce the frequency of your examinations. )
• Tree planting (Aranya Agricultural Alternatives method)  + ( *Define the plantation zone, *Make sure t … *Define the plantation zone, *Make sure that your sapling is ready for transplantation, *Make sure that weather conditions will be favorable for the young tree to grow (avoid dry season peak), *If applicable, [[Clay-pot-irrigation system (Aranya Agricultural Alternatives method)|build your clay-pot irrigation system]], *If applicable, [[Tree planting preparation (Sadhana Forest method)|build your bottle-irrigation system]]. Feel free to adapt the procedure to your environment. to adapt the procedure to your environment. )
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Jardin Vertical - Made in Albilab - Concours Castorama  + (<div class="icon-instructions caution-i …
  Toutes les réflexions qui sont menées dans cette partie ne sont là qu'à titre de réflexion et ne font pas partie des étapes de construction du jardin vertical car il s'avère qu'entre le papier et la réalité, il y a souvent des différences importantes, notamment dûes au fait de vouloir utiliser des matériaux de récupérations.
  Alexis a réfléchi à plusieurs agencements possible. Lors de sa réflexion, le plus complexe du projet a été de réussir à avoir une surface cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.ace cultivable de 1m carré en ayant un jardin vertical qui puisse se mettre sur un balcon.)
• Geiger counter 12+  + (<u>https://world-nuclear.org/nuclear … https://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
• Geiger counter 9-11  + (<u>https://world-nuclear.org/nuclear … https://world-nuclear.org/nuclear-basics/what-is-radiation.aspx Radiation is energy travelling through space. Sunshine is one of the most familiar forms of radiation. It delivers light, heat and suntans. While enjoying and depending on it, we control our exposure to it. Beyond ultraviolet radiation from the sun are higher-energy kinds of radiation which are used in medicine and which we all get in low doses from space, from the air, and from the earth and rocks.rom space, from the air, and from the earth and rocks.)
• PP Extruder Pro  + (==== Tools ==== 1/2" Socket ==== Parts == … ==== Tools ==== 1/2" Socket ==== Parts ==== 2x 1000mm 4080 extrusion 4x 300mm 4040 extrusion 40x t-nuts 22x M8x20 bolts 22x M8 Washers 12x Corner Brackets
  ==== Steps ==== # Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) # For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. # For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end. *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. # For the I-Beams, repeat the same steps for the C-beam, but on both sides. # Repeat so you have 2 I-beams and 2-C beams. # *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)uts. (as seen in the right two beams in image 3))
• Arc-en-ciel avec Arduino  + (A travers le plastique translucide du DEL, … A travers le plastique translucide du DEL, vous pouvez observer 2 parties distinctes, elles ont chacune leur polarité, anode + et cathode moins. La branche métallique la plus courte est la polarité négative (vers la masse) et la plus longue rejoint la polarité + (source d'alimentation)., cela vous aide visuellement à savoir dans quel sens l'intégrer dans votre circuit.s quel sens l'intégrer dans votre circuit.)
• LoRa Direct  + (If you are a LoRaWAN gateway provider or owner you can update details about your device, coverage and/or add comments for the public)
• Amazon Music Autoplay - A Seamless Listening Experience  + (Amazon Music Autoplay is a feature designe … Amazon Music Autoplay is a feature designed to keep the music playing continuously, providing an uninterrupted listening experience. With autoplay enabled, Amazon Music will automatically queue up and play similar songs, albums, or playlists once your current track or playlist ends. This feature aims to keep the music going without requiring you to manually select the next song, making it perfect for parties, road trips, or background music during work or chores.or background music during work or chores.)
• Fibonacci Clock  + (Cut 4 plywood board for outside walls, 2 o … Cut 4 plywood board for outside walls, 2 others for bottom and double-bottom, and 4 littles more for inside walls to split squares. Dimensions are the following : For outside walls : * 2 boards 85mm * 221mm * 2 boards 85mm * 138mm for bottom and double-bottom : * 2 boards 128mm * 211mm for inside walls: * 1 board 50mm * 128mm * 1 board 50mm * 78mm * 1 board 50mm * 50mm * 1 board 50mm * 26mm 1 board 50mm * 50mm * 1 board 50mm * 26mm)
• SolarOSE - Guide 3: Support structure of the receiver  + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
• SolarOSE - Guide 3: Support structure of the receiver  + (Cut at a length of 2300 mm 4 square tubes: … Cut at a length of 2300 mm 4 square tubes: a right cut and a 45° cut. Drill the holes according to the 3D model in order to assemble the legs of the “tepee” (1 hole/square tube), the receiver’s fixation (1 hole/square tube), the fixation of the inferior square tube across the length (2 holes/square tube), the fixation of the transversal flat (1 hole/ square tube, 800mm from the bottom, measured at the furthest point of the 45° cut). Check the total length of the square tube: the length necessary to drill the holes is measured from the bottom of the leg. Cut 4 flats with 30 mm large, 40 mm long and 5 mm thick and check the dimensions. Drill and tap the flats at 10 mm from the edges to fix an adjustable leg made of a screw with a diameter of 8 mm. Weld the flats on the edges cut at 45°. By doing this, an adjustable horizontal leg is obtained. an adjustable horizontal leg is obtained.)
• SunZilla - Guide 1: Preparing the aluminium profiles  + (Cut the aluminum profiles according to the technical drawings in the attached PDFs. Once you have them in hand, the first step is to file the ends of the profiles to deburr them, as shown in the picture.)
• Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
• Solar coffee roaster (using a Scheffler concentrator)  + (Cut the bars, the flats and the L profile angle at the lenghts marked in the following table (see image of table).)
• Collar with a small copper tube  + (Cut the copper tube 3 cm in length with a pipe cutter pliers)
• Collar with a small copper tube  + (Cut the copper tube 3 cm in length with a pipe cutter pliers)
• Spinning Kinetic Sculpture RGB  + (Cut the first svg file on 2 sheets of 300c … Cut the first svg file on 2 sheets of 300cmx300xm [[:Fichier:DecoupePart1.svg|DecoupePart1.svg]]. Do the same for the second file [[:Fichier:DecoupePart2.svg|DecoupePart2.svg]]. The cutting file is about 300cm by 300cm so if you have a 600x300 you can cut them two by two by merging the files. Bring together similar pieces so it's easier to work.her similar pieces so it's easier to work.)
• DIY Solar Charger  + (Draw the diagram of the charger)
• Design an object on 3D Slash and view it in VR  + (Go on [https://www.3dslash.net/slash.php?a … Go on [https://www.3dslash.net/slash.php?alias=2b478e6a3c5f081cc7eec47f166ef7f55ee2536b931340297bc25f32c4ca86fd 3Dslash.net] and click CREATE You can follow the[https://www.3dslash.net/learn_tutorials.php tutorials] available on the website, in order to learn how to use all available functionalities. For example, you can improve your design by adding colors, adding basic geometrical shapes, or import 3D files that you have downloaded from the web.les that you have downloaded from the web.)
• PP Shredder Pro  + (<nowiki>====Tools====<br />non … ====Tools====
  none
  ====Parts====
  1110.08 - Bearing Side Plate 4
  
  1110.09 - Bearing Side Plate 5
  
  1110.10 - Bearing Side Plate 6
  
  1110.11 - Gear Plate
  
  1110.01 - Top Plate
  
  ====Steps====
  
  #Layout the remaining pies as seen in image 1.
  #Slide plate 1110.08 directly on top of piece 1110.07
  #Drop in plate 1110.09 directly next to 1110.07/.08 in the open tabs.
  #Place the bottom tabs of plate 1110.10 into the bottom plate, and then fold the plate upwards into place.
  #Place plate 1110.11 on top as seen in image 5.
  #Place plate 1110.01 on top, securing the entire box in place.
  
  *Note - in the next steps, you will dismantle these last few steps, but it is important to understand how the box comes together.
  
  
  t;br /><br/></nowiki>)
• How to Edit TikTok Video After Posting  + (Have you ever uploaded a video on TikTok t … Have you ever uploaded a video on TikTok then realized that there’s still something left in your video? If you did, then you may be wondering how to edit caption on TikTok video after posting it. The bad news is, you can’t directly edit the video that has already been uploaded on TikTok. But there still are some workarounds that enable you to re-edit your TikTok video, keep reading. = Download ＆ Repost = You can’t edit a TikTok video once it’s posted. One of the solutions is that you can save it to your phone and repost it. Here’s how to do it: '''Step 1:''' Launch TikTok on your phone and tap the “Profile” button in the bottom right corner of the screen. '''Step 2:''' Select a TikTok video that you already posted. Then tap the “Save Video” button. This step will save all the things you’ve added to your video including effects and background music. '''Step 3:''' Then, go to the main interface of TikTok and then press the “+” icon and then upload the video that you saved from your phone. '''Step 4:''' Now you can re-edit your video such as adding a caption, music or some more effects. After editing, you can upload the video again and delete the original post. = Re-upload Your Video = If you found some typos or other effects that can’t be deleted in your post, you can delete the original post and upload your video again. '''Step 1:''' Open TikTok on your phone and tap on the + button to create a new post. '''Step 2:''' Next to the Record button, tap on the Upload button. Then select the video you want to upload. '''Step 3:''' You can now add new effects and music to your video. After the editing, you can upload the video as a new post.
  can upload the video as a new post. <br/>)
• Getting Started with 3.5 Inch PC State Display  + (If you are a PC enthusiast, you might want … If you are a PC enthusiast, you might want to monitor the performance and status of your PC components, such as CPU, GPU, RAM, SSD, HDD, temperature, fan speed, etc. However, opening the task manager or third-party software every time you want to check this information can be inconvenient and distracting. Moreover, you might not be able to see this information when you are gaming or doing other full-screen activities. That’s why a 3.5-inch PC state display can be a great addition to your PC setup. A 3.5-inch PC state display is a small screen that can be mounted on your PC case and display various information about your PC state. It can show you the CPU model, usage, frequency, temperature, fan speed, GPU model, usage, frequency, temperature, fan speed, RAM usage, SSD/HDD usage, network speed, IP address, weather forecast, and custom information. You can also choose from different themes and orientations to suit your preferences. A 3.5-inch PC state display can help you monitor your PC state at a glance, without interrupting your workflow or gaming experience. It can also enhance the aesthetics and functionality of your PC case, making it more personalized and attractive. Whether you are a gamer, a streamer, a content creator, or a professional, a 3.5-inch PC state display can be a useful and fun tool for your PC. In this article, I will show you how to get started with a 3.5-inch PC state display, how to install it, how to customize it, and how to use it. Let’s begin!tomize it, and how to use it. Let’s begin!)
• Energy module for People Pedal Power  + (You can chose between different buffering … You can chose between different buffering systems, an battery, a supercapacitor or a flywheel. We chose a supercapacitor. A supercapacitor is an electronic component able to hold a charge. It can be used in the same function as batteries with the following differences : + a capacitor is easier to recycle than most batteries (references will follow). + a capacitor can provide and absorb a higher peak power. – the voltage varies with the charging state of the capacitor (it needs an additional converter to provide the voltage of the system) – the energy by weight capacity is less interesting than with batteries. – the cost by energy is higher. – the lifetime is quasi infinite (1M cycles). The energy storage of a supercapacitor : energy = 1/2 * C * voltage difference^2 http://www.engineeringtoolbox.com/capacitors-energy-power-d_1389.html ex = 1/2 * 500F * (16-12)^2 = 4000J = 1.11Wh = 1 cyclist for 1min20sec http://www.maxwell.com/products/ultracapacitors/16v-large-modules/documentsltracapacitors/16v-large-modules/documents)
• Système de notification physique  + (Une fois toute la partie logiciel terminée … Une fois toute la partie logiciel terminée vous pouvez passer à l’électronique. On retrouve rien de bien compliqué. L’électricité est fournie par le port USB. La tension est ensuite abaissée de 5V à 3,3V pour alimenter l'ESP8266. Ce dernier contrôle ensuite les LEDs avec sa broche 2 par l’intermédiaire d'une résistance de 330 Ohms. Enfin il est aussi intéressant d'ajouter un condensateur de 100 μF aux bornes des WS2812 pour ''lisser'' la tension d'alimentation.pour ''lisser'' la tension d'alimentation.)
• Système de notification physique  + (Pour programmer l'ESP82266 on va uiliser l … Pour programmer l'ESP82266 on va uiliser l'IDE Arduino. Pour cela, il vous faut tout d’abord ajouter le support de ce type de carte dans l'IDE en ajoutant l'URL suivante dans Fichier>Préférences>URL de gestionnaire de cartes supplémentaires : http://arduino.esp8266.com/package_esp8266com_index.json,http://arduino.esp8266.com/stable/package_esp8266com_index.json Puis choisir "Generic ESP8266 Module " dans Outils>types de carte. Et enfin relier l'ESP au convertisseur USB/série comme indiquer sur le schéma. Pour gérer les leds WS2812 la meilleur solution est la librairie NeoPixel d'Adafruit: https://github.com/adafruit/Adafruit_NeoPixel Maintenant que vous avez tous les outils d'installés vous allez pouvoir passez envoyer le programme sur l'ESP: https://drive.google.com/open?id=0B8tCTkPLfNNrQTdaYTVYZWQwTGc Vous pouvez ensuite modifier/ajouter des valeurs au début du "void loop" pour choisir la couleur de notification associé à chaque application. La couleur est gérée par la fonction ''notif'' que prend comme paramètres 3 valeurs comprises entre 0 et 255 correspondant respectivement au taux de rouge, de vert et de bleu.
  Penser à modifier l'attributs NUMLED en fontion du nombre de leds que vous utilisez et à changer le ssid et le password pour vous connecter à votre réseau wifi.
  à changer le ssid et le password pour vous connecter à votre réseau wifi.</div> </div>)
• Surf en carton  + (Les plans sont en open source et disponible [http://westkustsurf.nl/?page_id=21786 ICI] Nôtre choix s'est porté sur le "5.10 Fish")
• Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
• Minetest and 3D printing  + (Once download is completed, unzip the folder somewhere on your computer, ex. on your desktop. Download link available [https://www.minetest.net/downloads/ here]. <br/>)
• Solar Charger  + (Open the Aksnet box to get the tools and materials)
• Solar Charger  + (Open the Aksnet box to get the tools and materials)
• Design for lasercut with Makercase  + (Open the website [http://www.makercase.com … Open the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
• Design for lasercut with Makercase  + (Open the website [http://www.makercase.com … Open the website [http://www.makercase.com www.makercase.com] No registration or action is needed. Design with Makercase: * Set the units to millimeters * Set the dimension as EXTERNAL and set the size as 40 width, 40 height, 40 depth * Set the material thickness: we suggest using 4mm using  the “Custom material thickness” option * Select the Finger mode for the Edge Joints option * Set the tab width to 4 mmJoints option * Set the tab width to 4 mm)
• SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
• SunZilla - Setup manual  + (Press the cable inside when both white points match and turn the blue top unit of the cable to lock.)
• IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
• IKEA hack: TARVA Chest of 3 drawers in pine  + (Remove the drawer handles with your screwdriver.)
• Collier personnalisé en graines de Caconnier  + (Récupérer des graines de caconnier, du fil de pêche, des chutes de contreplaqué et du bois peyi.)
• Jeux d'adresse  + (Si vous préférez dessiner sur un papier pr … Si vous préférez dessiner sur un papier prenez un feutre noir et réaliser la forme de votre carton et remplissez la (penser à laisser des espaces blancs pour les trous) puis vectoriser le dessin sur Inkscap. Ou sinon passez directement sur le logiciel Inkscap et réalisez le modèle que vous voulez ou prenez une image Open Source sur internet.prenez une image Open Source sur internet.)
• Jeux d'adresse  + (Si vous préférez dessiner sur un papier pr … Si vous préférez dessiner sur un papier prenez un feutre noir et réaliser la forme de votre carton et remplissez la (penser à laisser des espaces blancs pour les trous) puis vectoriser le dessin sur Inkscap. Ou sinon passez directement sur le logiciel Inkscap et réalisez le modèle que vous voulez ou prenez une image Open Source sur internet.prenez une image Open Source sur internet.)
• Make Collaborative Playlists on Spotify  + (Step 1. In the left panel, right-click a playlist you wish to open. Step 2. Select 'Collaborative Playlist'. Step 3. Right-click on the playlist again, then scroll down to 'Share'. Step 4. Choose 'Copy Playlist Link' then send it to your friends.)
• Refreshing Oxalis Kvas  + (Step 3: Boil then some water and pour it into the pot with herbs.)
• Geiger counter  + (This is a timelapse of the assembly process of the geiger counter)
• How to Play Tidal on Galaxy Watch  + (To begin using Tidal on your Galaxy Watch, … To begin using Tidal on your Galaxy Watch, you'll need to download and install the Tidal app. Follow these steps to get started: '''Step 1: Open the Galaxy Wearable App''' First, open the Galaxy Wearable app on your smartphone. This app allows you to manage and install applications on your Galaxy Watch. '''Step 2: Find and Install the Tidal App''' In the Galaxy Wearable app, navigate to the "Galaxy Store" section. Search for the Tidal app using the search bar and select it from the search results. Tap on "Install" to begin the installation process. '''Step 3: Sign in to your Tidal Account''' Once the Tidal app is installed on your Galaxy Watch, open it, and sign in using your Tidal account credentials. If you don't have a Tidal account yet, you can create one directly from the app.
  n create one directly from the app. <br/>)
• Applique abat-jour avec lampe murale à la découpe laser  + (Tout d'abord, j'ai choisi sur Wikifab, le tutoriel [[Applique Abat-Jour Mural Volcano]])
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Fabriquer une télécommande pour reflex/fr  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• Télécommande pour reflex  + (Vous pouvez trouver ici les plans de const … Vous pouvez trouver ici les plans de construction de la boite: https://drive.google.com/open?id=0B8tCTkPLfNNrZU43X0xNcFZIR0U Ils sont légèrement différents de ce que j'ai utilisé car je me suis rendu compte lors de l'assemblage de l’électronique que la boite n'était pas tout à fait assez grande. N'ayant pas le temps (et le courage) de la refaire j'ai mis un rajout à sa base. Pour sa construction commencez par reporter sur le médium les dimensions de toutes les pièces puis découpez leur contours avec une scie à main ou électrique pour plus de précision.main ou électrique pour plus de précision.)
• SunZilla - Guide 5: Assembling solar panels frames  + (You can find the positions and diameter of … You can find the positions and diameter of the holes in the .PDF technical drawing which you can download below. For marking those of the PV-modules use a marker pen. For drilling use a metal or wood drill. Two of the 20mm-L-profiles need to have a slot cut along one side; the position of the slots is shown in the .PDF technical drawing downloadable below. These slots will allow the angle of incidence can be adjusted. To slot the profile you should use a milling cutter.e profile you should use a milling cutter.)