Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• Repair Cafe'  + ( *soldering wire *wires *soletape *masking tape *internet *pens and notebooks (Documentation) )
• Repair Cafe'  + ( *soldering wire *wires *soletape *masking tape *internet *pens and notebooks (Documentation) )

• IKEA hack: TARVA Chest of 3 drawers in pine  + ('''For furniture:''' * 1 masking tape for … '''For furniture:''' * 1 masking tape for painting * white lacquer paint '''For drawer handles:''' * 3 x copper tube diameter 15 mm length 41 cm * 6 x 90 ° bends in 15 mm diameter copper * 6 screws * 6 claw nuts about 14mm diameter (must be able to return in the elbows of 15mm diameter) And above all: a TARVA Chest of 3 drawers (€59.90 at IKEA) TARVA Chest of 3 drawers (€59.90 at IKEA))
• IKEA hack: TARVA Chest of 3 drawers in pine  + ('''For furniture:''' * 1 masking tape for … '''For furniture:''' * 1 masking tape for painting * white lacquer paint '''For drawer handles:''' * 3 x copper tube diameter 15 mm length 41 cm * 6 x 90 ° bends in 15 mm diameter copper * 6 screws * 6 claw nuts about 14mm diameter (must be able to return in the elbows of 15mm diameter) And above all: a TARVA Chest of 3 drawers (€59.90 at IKEA) TARVA Chest of 3 drawers (€59.90 at IKEA))
• PiKon telescope  + ('''Parts to print:''' * Spider (x1) * Cam … '''Parts to print:''' * Spider (x1) * Camera Mount (x1) * Raspberry Pi Mount (x1) * Focus Knob (x1) * Mirror Mount (x1) * Mirror Base (x1) '''Other parts''' * Telescope Tube (x1) * Mirror (x1) * 3.5 mm x 10 mm Self Tapping Screws (x1) * 8mm Nuts (x3) * 8mm x 25mm Bolts (x3) * Springs (x3) * Double Sided Tape Pad * Raspberry Pi 2 Computer * Raspberry Pi Camera * Ribbon Cable * Raspberry Pi Case * M2 x 12mm Nylon Bolts (x4) * M2 Nylon Nuts (x4) * Micro SD card * Tripod Mount * Rubber Rack – T2.5 Timing belt * Screw Threaded Shaft (5mm) * 5mm Square Nuts * 5mm Dome Nut * Cog * Camera adaptorNuts * 5mm Dome Nut * Cog * Camera adaptor)
• SolarOSE : concentrateur solaire thermique linéaire de fresnel  + ('''Steel:''' * Tube 40×30 thickness:2 L143 … '''Steel:''' * Tube 40×30 thickness:2 L1430 minimum length 1430 quantity:4 (Order : 1,5 x 6m) * Tube 25×25 thickness:2 L2130 minimum length: 2130 quantity:4 (Order : 2x6m) * Tube 30×30 thickness: 2 L2500 minimum length: 2500 quantity: 5 (Order: 2 x 6m) * Tube 20×20 thickness: 2 L2200 quantity: 4 + L1000 quantity 2. minimum length: 2200 (Order: 2.5 x 6m) * Tube_50x50 ép.3 L3m minimum length: 3m quantity: 2 (Order : 1x6m) * Jonc acier Ø8 quantity: 6M minimum length: 150mm (Order : 1x6m) * Flat (15 to 20) x (2 to 2,5) L2,5m minimum length: 2,5m quantity: 2 (Order: 20,58×2,5 L6m) * Flat (7 to 10) x (1 to 2) L2,5m minimum length: 2,5m quantity: 1 * Flat 20×3, L100mm quantity 2 * Flat 30×5, L2150mm quantity 1 * Profile. interior dimension : (20 à 35) x (30 à 50) L 2,2m quantity: 2; L 100, quantity 2. minimum length: 2,2m (Order: dim int 27 x 55,5 thickness: 3. dim ext 30 x 58,5) * Stainless steel bar 8000 mm long, 8mm diameter '''Aluminium:''' * Square tube 2000m long, 20×40. *2000x 3000 (2000×2000 + 3 times 340 x 680 mm + 2 times 230 x 125mm + 2 times 50 x 50 mm) Mirror plate, anodized aluminum * 0.2 mm thick Plate (printing offset plate) 700mm x 2100mm + 300x250mm '''Screws:''' * Screw M10 L80. Quantity: 2 * Screw M8 L100. Quantity: 12 * Screw M6 L70. Quantity: 32 * Screw M6 L60. Quantity: 40 * Screw M6 L70 quantity: 40 * Screw M6 L25. Quantity: 20 * Screws M5. Quantity :12 * Screw CHC (pan hex head) M4 L20 quantity: 50 * Screw M4 countersunk hex head. Minimum length: 10 quantity: 20 * Screw M3x16. Quantity : 80 * nut M8. Quantity : 42 * nut M6. Quantity :200 * nut M5. Quantity :12 * nut M4 quantity : 150. (60 in screws H M4 (thickness 3) + 50 in countersunk head screws M4 (thickness 3) * Washers M3 quantity : 300. Ø9-Ø3,2-thickness:0.7 * Washers M4 quantity: 120. Ø12-Ø4,4-thickness:1 * Washers M6 quantity : 250. Øext 13.8 et 18 * threaded rod M8 quantity: 1000mm. minimum length: 400mm '''Wood:''' * Wood plate (for example laminated structural wood), minimum dimension: 810×500 (thickness:.10) compatible with laser cut. Quantity: 2 '''Pipes:''' * 1 brass tube with an exterior diameter of 55 mm and a length of 1900 mm * 4.5 m copper pipes, minimum length 3m. '''Other:''' *Anti-rost painting * sealant PVC alu special for glazing *Height adjustable feet M8. Threading M8 L25 – total height 35mm quantity: 8 * Glass cover 1000x250x4 quantity:2 * 2000 mm length of a 2 mm diameter steel cable * “element to adjust length of the cable” 1 * Glue * Rockwool (or other fire resistant insulation material, 300°C) insulation 10 cm thick (600×1000) quantity 2. * Cotton Insulation (for steam pipe) 10 cm thick, 600×1000, quantity 1. * Aluminum adhesive tape (quote in text) * Adhesive tape * Auto-lubrifying bushing. Quantity: 40pe * Auto-lubrifying bushing. Quantity: 40)
• SolarOSE : concentrateur solaire thermique linéaire de fresnel  + ('''Steel:''' * Tube 40×30 thickness:2 L143 … '''Steel:''' * Tube 40×30 thickness:2 L1430 minimum length 1430 quantity:4 (Order : 1,5 x 6m) * Tube 25×25 thickness:2 L2130 minimum length: 2130 quantity:4 (Order : 2x6m) * Tube 30×30 thickness: 2 L2500 minimum length: 2500 quantity: 5 (Order: 2 x 6m) * Tube 20×20 thickness: 2 L2200 quantity: 4 + L1000 quantity 2. minimum length: 2200 (Order: 2.5 x 6m) * Tube_50x50 ép.3 L3m minimum length: 3m quantity: 2 (Order : 1x6m) * Jonc acier Ø8 quantity: 6M minimum length: 150mm (Order : 1x6m) * Flat (15 to 20) x (2 to 2,5) L2,5m minimum length: 2,5m quantity: 2 (Order: 20,58×2,5 L6m) * Flat (7 to 10) x (1 to 2) L2,5m minimum length: 2,5m quantity: 1 * Flat 20×3, L100mm quantity 2 * Flat 30×5, L2150mm quantity 1 * Profile. interior dimension : (20 à 35) x (30 à 50) L 2,2m quantity: 2; L 100, quantity 2. minimum length: 2,2m (Order: dim int 27 x 55,5 thickness: 3. dim ext 30 x 58,5) * Stainless steel bar 8000 mm long, 8mm diameter '''Aluminium:''' * Square tube 2000m long, 20×40. *2000x 3000 (2000×2000 + 3 times 340 x 680 mm + 2 times 230 x 125mm + 2 times 50 x 50 mm) Mirror plate, anodized aluminum * 0.2 mm thick Plate (printing offset plate) 700mm x 2100mm + 300x250mm '''Screws:''' * Screw M10 L80. Quantity: 2 * Screw M8 L100. Quantity: 12 * Screw M6 L70. Quantity: 32 * Screw M6 L60. Quantity: 40 * Screw M6 L70 quantity: 40 * Screw M6 L25. Quantity: 20 * Screws M5. Quantity :12 * Screw CHC (pan hex head) M4 L20 quantity: 50 * Screw M4 countersunk hex head. Minimum length: 10 quantity: 20 * Screw M3x16. Quantity : 80 * nut M8. Quantity : 42 * nut M6. Quantity :200 * nut M5. Quantity :12 * nut M4 quantity : 150. (60 in screws H M4 (thickness 3) + 50 in countersunk head screws M4 (thickness 3) * Washers M3 quantity : 300. Ø9-Ø3,2-thickness:0.7 * Washers M4 quantity: 120. Ø12-Ø4,4-thickness:1 * Washers M6 quantity : 250. Øext 13.8 et 18 * threaded rod M8 quantity: 1000mm. minimum length: 400mm '''Wood:''' * Wood plate (for example laminated structural wood), minimum dimension: 810×500 (thickness:.10) compatible with laser cut. Quantity: 2 '''Pipes:''' * 1 brass tube with an exterior diameter of 55 mm and a length of 1900 mm * 4.5 m copper pipes, minimum length 3m. '''Other:''' *Anti-rost painting * sealant PVC alu special for glazing *Height adjustable feet M8. Threading M8 L25 – total height 35mm quantity: 8 * Glass cover 1000x250x4 quantity:2 * 2000 mm length of a 2 mm diameter steel cable * “element to adjust length of the cable” 1 * Glue * Rockwool (or other fire resistant insulation material, 300°C) insulation 10 cm thick (600×1000) quantity 2. * Cotton Insulation (for steam pipe) 10 cm thick, 600×1000, quantity 1. * Aluminum adhesive tape (quote in text) * Adhesive tape * Auto-lubrifying bushing. Quantity: 40pe * Auto-lubrifying bushing. Quantity: 40)
• Build a Longboard from Scratch in Your Own Home  + ( * 1 Skateboard Wood - Lumber * 2 Wheels S … * 1 Skateboard Wood - Lumber * 2 Wheels Skateboard Accessory - Mixed * Bearings 608zz * MBS All-terrain skateboard wheel * 4-way outlet galvanized steel 1/2" * Nipple galvanized steel 1/2"-3"inch * Sandpaper tape skateboard * Maple skate board * 6° Wedge risers * Steel Brackets * Threaded Rods 5/16" x 12" inch * Nipple galvanized steel 1/2"-1"inch * INOX Allen Bolt 1/4" x 1.5" inch * 12- Nut 5/16" inch Bolt 1/4" x 1.5" inch * 12- Nut 5/16" inch )
• Create a wooden pet that connects with Facebook  + ( * 1 x ESP32 board with power cable * 4 x jumper wires * 1 x breadboard * 1 x Led * 1 x 250 kohm resistor (or similar) )
• Create a wooden pet that connects with Facebook  + ( * 1 x ESP32 board with power cable * 4 x jumper wires * 1 x breadboard * 1 x Led * 1 x 250 kohm resistor (or similar) )
• PiKon : télescope imprimé en 3D et un Raspberry Pi camera  + ( * 1 x Spider * 1 x Camera Mount * 1 x Ras … * 1 x Spider * 1 x Camera Mount * 1 x Raspberry Pi Mount * 1 x Focus Knob * 1 x Mirror Mount * 1 x Mirror Base * 1 x Telescope Tube * 1 x Mirror * 3.5 mm x 10 mm Self Tapping Screws (x8) * 8mm Nuts (x3) * 8mm x 25mm Bolts (x3) * Springs (x3) * Double Sided Tape Pad * Raspberry Pi 2 Computer * Raspberry Pi Camera * Ribbon Cable * Raspberry Pi Case * M2 x 12mm Nylon Bolts (x4) * M2 Nylon Nuts * Micro SD card * Tripod Mount * Rubber Rack– T2.5 Timing belt * Screw Threaded Shaft (5mm) * 5mm Square Nuts * 5mm Dome Nut * Cog * Camera adaptor * M4 Bolts 16mm * M4 Nuts * Camera adaptor * M4 Bolts 16mm * M4 Nuts )
• PiKon : télescope imprimé en 3D et un Raspberry Pi camera  + ( * 1 x Spider * 1 x Camera Mount * 1 x Ras … * 1 x Spider * 1 x Camera Mount * 1 x Raspberry Pi Mount * 1 x Focus Knob * 1 x Mirror Mount * 1 x Mirror Base * 1 x Telescope Tube * 1 x Mirror * 3.5 mm x 10 mm Self Tapping Screws (x8) * 8mm Nuts (x3) * 8mm x 25mm Bolts (x3) * Springs (x3) * Double Sided Tape Pad * Raspberry Pi 2 Computer * Raspberry Pi Camera * Ribbon Cable * Raspberry Pi Case * M2 x 12mm Nylon Bolts (x4) * M2 Nylon Nuts * Micro SD card * Tripod Mount * Rubber Rack– T2.5 Timing belt * Screw Threaded Shaft (5mm) * 5mm Square Nuts * 5mm Dome Nut * Cog * Camera adaptor * M4 Bolts 16mm * M4 Nuts * Camera adaptor * M4 Bolts 16mm * M4 Nuts )
• Collar with a small copper tube  + ( * A white waxed cotton cord * A clasp and two cable wire ends 9 mm * A 18 cm copper tube of 3 mm diameter )
• Collar with a small copper tube  + ( * A white waxed cotton cord * A clasp and two cable wire ends 9 mm * A 18 cm copper tube of 3 mm diameter )
• Temperature display on LCD and Android device  + ( * Arduino Nano * HC-06 Bluetooth module * 2 rows 16 digits LCD display * ds18b20 temperature sensor * 10 kO potentiometer ( for the display) * 4.7 kO resistor * Breadboard * Some wires )
• Librem 5 Case  + ( * PLA * soldering iron )
• Librem 5 Case  + ( * PLA * soldering iron )
• Road Tubeless Tape Installation  + ( * Tubeless tape <br/> )
• Un badge électronique  + ( * Un module papier électronique, écran de … * Un module papier électronique, écran de 1.54 pouces avec 200x200 pixels et une interface SPI. Celui-ci est un Waveshare acheté sur Internet [https://fr.aliexpress.com/item/200x200-1-54inch-E-Ink-display-module-Without-PCB-Communicate-via-SPI-interface-Supports-various-controller/32811542977.html ici] * 12 grammes de PLA pour imprimer le boîtier 12 grammes de PLA pour imprimer le boîtier )
• Un badge électronique  + ( * Un module papier électronique, écran de … * Un module papier électronique, écran de 1.54 pouces avec 200x200 pixels et une interface SPI. Celui-ci est un Waveshare acheté sur Internet [https://fr.aliexpress.com/item/200x200-1-54inch-E-Ink-display-module-Without-PCB-Communicate-via-SPI-interface-Supports-various-controller/32811542977.html ici] * 12 grammes de PLA pour imprimer le boîtier 12 grammes de PLA pour imprimer le boîtier )
• ZAC+ Kathodentester-Zelle  + ( * Zink * Gehäuse * Abdichtung * [https:// … * Zink * Gehäuse * Abdichtung * [https://gaskatel.com/epages/6ba0afcc-c9aa-469f-891b-550cc0919543.sf/en_GB/?ObjectPath=/Shops/6ba0afcc-c9aa-469f-891b-550cc0919543/Products/82010/SubProducts/82011 MOC Gaskathode] *Dichtungskleber *Paketband & blaues Masking-Tape *Maschinenschrauben + Muttern + Unterlegscheiben *Pappe (Messeschild z.B.) *(unvollständig) iben *Pappe (Messeschild z.B.) *(unvollständig) )
• ZAC+ Kathodentester-Zelle  + ( * Zink * Gehäuse * Abdichtung * [https:// … * Zink * Gehäuse * Abdichtung * [https://gaskatel.com/epages/6ba0afcc-c9aa-469f-891b-550cc0919543.sf/en_GB/?ObjectPath=/Shops/6ba0afcc-c9aa-469f-891b-550cc0919543/Products/82010/SubProducts/82011 MOC Gaskathode] *Dichtungskleber *Paketband & blaues Masking-Tape *Maschinenschrauben + Muttern + Unterlegscheiben *Pappe (Messeschild z.B.) *(unvollständig) iben *Pappe (Messeschild z.B.) *(unvollständig) )
• ZAC+ Kathodentester-Zelle  + ( * Zink * Gehäuse * Abdichtung * [https:// … * Zink * Gehäuse * Abdichtung * [https://gaskatel.com/epages/6ba0afcc-c9aa-469f-891b-550cc0919543.sf/en_GB/?ObjectPath=/Shops/6ba0afcc-c9aa-469f-891b-550cc0919543/Products/82010/SubProducts/82011 MOC Gaskathode] *Dichtungskleber *Paketband & blaues Masking-Tape *Maschinenschrauben + Muttern + Unterlegscheiben *Pappe (Messeschild z.B.) *(unvollständig) iben *Pappe (Messeschild z.B.) *(unvollständig) )
• Electronic textile bag  + ( * conductive thread (about 13 meters) * 2 … * conductive thread (about 13 meters) * 2mm thick textile (or thinner) * 1 x Led * 1 x 8 ohm speaker * 1 x mini vibrating motor * 1 x photoresistor * 1 x textile bag * 1 x Arduino board + power cable * 6 x jumper wires * 6 x small safety pins (around 4 cm long) * 9 x metal snap buttons (make sure they are not coated and are conductive) * 1 x 250 ohm resistor (or similar) * electric wire (about 1 meter) or similar) * electric wire (about 1 meter) )
• Electronic textile bag  + ( * conductive thread (about 13 meters) * 2 … * conductive thread (about 13 meters) * 2mm thick textile (or thinner) * 1 x Led * 1 x 8 ohm speaker * 1 x mini vibrating motor * 1 x photoresistor * 1 x textile bag * 1 x Arduino board + power cable * 6 x jumper wires * 6 x small safety pins (around 4 cm long) * 9 x metal snap buttons (make sure they are not coated and are conductive) * 1 x 250 ohm resistor (or similar) * electric wire (about 1 meter) or similar) * electric wire (about 1 meter) )
• Open Documentation training  + ( * flip charts * pens * marker pens * note books )
• Open Documentation training  + ( * flip charts * pens * marker pens * note books )
• Creating a trash ball  + ( * paper (trash) * polythene * masking tape * dark tape )
• Creating a trash ball  + ( * paper (trash) * polythene * masking tape * dark tape )
• Fibonacci Clock  + ( * plywood 5mm thick * plexi * Arduino UNO … * plywood 5mm thick * plexi * Arduino UNO board * Real Time clock module RTC DS1307 * addressable RGB LED strip * 4 push buttons * power supply for arduino * supply connector * electric wires Warning : check that your RGB LED strip is addressable. The strip I used has the following reference : WS2812B used has the following reference : WS2812B )
• ASKotec Tutorials - DIY Simple analog synth  + ( *1k Resistor *100k Resistor *Transistor SS9018HBU TO-92 *10k Potentiometer *LED Diode *Capacitors (smaller value higher pitch) *Wires (2 Colors) *Prototype Board *Battery Connector (and 9V Battery) *Mini Jack Audio Socket *8 Pin RoHS PCB IC Socket )
• ASKotec Tutorials - DIY Simple analog synth  + ( *1k Resistor *100k Resistor *Transistor SS9018HBU TO-92 *10k Potentiometer *LED Diode *Capacitors (smaller value higher pitch) *Wires (2 Colors) *Prototype Board *Battery Connector (and 9V Battery) *Mini Jack Audio Socket *8 Pin RoHS PCB IC Socket )
• Potato Tower  + ( *Parts: **(8) Wooden poles (sturdy), **(1 … *Parts: **(8) Wooden poles (sturdy), **(1*) Pipe (not available on site => we used stones rather than a pipe); *Consumables: **Flexible wood sticks (or hence fence wire), **Banana leaves (or newspaper, carton), **Stones (see *), **Potato eyes, **Soil, **If available, compost, **Water, **Mulching material (corn stalks, rice hulls, hay, straw, dry leaves, BRF …); s, rice hulls, hay, straw, dry leaves, BRF …); )
• Potato Tower  + ( *Parts: **(8) Wooden poles (sturdy), **(1 … *Parts: **(8) Wooden poles (sturdy), **(1*) Pipe (not available on site => we used stones rather than a pipe); *Consumables: **Flexible wood sticks (or hence fence wire), **Banana leaves (or newspaper, carton), **Stones (see *), **Potato eyes, **Soil, **If available, compost, **Water, **Mulching material (corn stalks, rice hulls, hay, straw, dry leaves, BRF …); s, rice hulls, hay, straw, dry leaves, BRF …); )
• Fusée à soufflet  + ( *Une bouteille d'eau (ou de boisson gazeuse) *Un tube PVC IRL de 2 mètres de long, diamètre 25mm (ou diamètre 20mm si on utilise une bouteille de boisson gazeuse) *Un raccord courbe *Du duct tape *Un élastique *Des feuilles de papier )
• Fusée à soufflet  + ( *Une bouteille d'eau (ou de boisson gazeuse) *Un tube PVC IRL de 2 mètres de long, diamètre 25mm (ou diamètre 20mm si on utilise une bouteille de boisson gazeuse) *Un raccord courbe *Du duct tape *Un élastique *Des feuilles de papier )
• Repair Cafe'  +
• Repair Cafe'  +
• Connected house publishes sensor data on-line  + (- ESP32 board - jumper wires - power cable - breadboard - light sensor)
• Connected house publishes sensor data on-line  + (- ESP32 board - jumper wires - power cable - breadboard - light sensor)
• Energy saving house with ESP32  + (- ESP32 board - micro USB cable to power … - ESP32 board - micro USB cable to power the board - laser cut house (downloadable [https://drive.google.com/file/d/1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY/view?usp=sharing here]) - Breadboard - 3 jumper wires (one M/F) - light sensor - optional (Led) - 1kohm resistorsensor - optional (Led) - 1kohm resistor)
• Energy saving house with ESP32  + (- ESP32 board - micro USB cable to power … - ESP32 board - micro USB cable to power the board - laser cut house (downloadable [https://drive.google.com/file/d/1JGQVbJy4yhH1qOw0H3IVO0c7uRhI1ZIY/view?usp=sharing here]) - Breadboard - 3 jumper wires (one M/F) - light sensor - optional (Led) - 1kohm resistorsensor - optional (Led) - 1kohm resistor)
• Customisation d'un stylo  + (-un stylo -du waschi tape)
• DIY Makey Makey with Arduino Leonardo  + (1 x Arduino Leonardo + USB cable 6 x 1Mohm resistors 1x large breadboard 14 x jumper wires 7 x alligator clips)
• IoT with ESP32 board  + (1 x ESP32 board + Micro USB cable 1 x light sensor About 5 jumper wires 1 x 1Kohm resistor)
• Analogic Drawing Pad  + (10x M4x25mm screws<br /><br /> … 10x M4x25mm screws
  
  
  34x M4 Nuts
  
  
  
  
  === [https://fr.opitec.com/opitec-web/articleNumber/809350 2x big pulleys] ===
  
  === [https://fr.opitec.com/opitec-web/articleNumber/801433 8 x small pulleys] ===
  1x A4 size MDF board, 3mm thick
  
  
  2 long wooden skewers
  
  
  nylon wire
  
  
  
  
  lt;br /><br />nylon wire<br /><br /><br /><br /><br/>)
• Analogic Drawing Pad  + (10x M4x25mm screws<br /><br /> … 10x M4x25mm screws
  
  
  34x M4 Nuts
  
  
  
  
  === [https://fr.opitec.com/opitec-web/articleNumber/809350 2x big pulleys] ===
  
  === [https://fr.opitec.com/opitec-web/articleNumber/801433 8 x small pulleys] ===
  1x A4 size MDF board, 3mm thick
  
  
  2 long wooden skewers
  
  
  nylon wire
  
  
  
  
  lt;br /><br />nylon wire<br /><br /><br /><br /><br/>)
• Robot "ABC" in wood  + (1x wooden board thickness 5mm (13/64 inch) … 1x wooden board thickness 5mm (13/64 inch) - 610mm (2 ft 1/64 inch) - 407mm (1 ft 4 1/32 inch)
  1x Arduino Uno http://www.robotshop.com/en/arduino-uno-r3-usb-microcontroller.html Product Code : RB-Ard-34
  1x Green LED Strip Flexible https://www.banggood.com/50CM-Waterproof-USB-SMD3528-TV-Background-Computer-LED-Strip-Tape-Flexible-Light-DC5V-p-1102998.html?rmmds=search 1x power supply battery (for LED strip) http://www.robotshop.com/en/waterproof-3xaa-battery-case-switch.html 2x Motors DC http://www.robotshop.com/en/makeblock-25mm-dc-motor-kit-blue.html 1x Motor Shield http://www.robotshop.com/en/arduino-motor-shield-rev3.html 1x infrared sensor 1x Infrared Remote Control http://www.robotshop.com/en/dfrobot-ir-remote-kit-arduino.html 2x battery holders (6 x 1,5 Volt LR6 batteries) (Arduino Uno main power supply) 4x Batteries 4,5Volts (2 pack mounted in parallel, each pack includes 2 4.5V batteries mounted in series) - (it makes a power supply under 9V for the power supply I paralleled to have a longer battery life ) 8x M4 Nuts http://www.screwfix.com/p/easyfix-hex-nuts-a2-stainless-steel-m4-100-pack/8398t 8x Screw M4 - 50 http://uk.farnell.com/tr-fastenings/m450-psstmcz100/screw-slt-pan-steel-bzp-m4x50/dp/1419307 4x M4 Spacer http://uk.farnell.com/c/fasteners-mechanical/fasteners-fixings/spacers-feet/standoffs?thread-size-metric=m4 1x swivel caster wheel http://www.robotshop.com/en/2-swivel-caster-wheel.htmlhttp://www.robotshop.com/en/2-swivel-caster-wheel.html)
• Boite aux lettres connectée  + (<u>Pour l’électronique:</u> *u … Pour l’électronique: *un [https://www.banggood.com/ESP8266-ESP-07-Remote-Serial-Port-WIFI-Transceiver-Wireless-Module-p-961247.html?rmmds=search ESP8266 ESP-07] et son [https://www.banggood.com/Serial-Port-WIFI-ESP8266-Module-Adapter-Plate-With-IO-Lead-Out-For-ESP-07-ESP-08-ESP-12-p-1056660.html?rmmds=search support] *une [https://www.banggood.com/3Pcs-DS3231-AT24C32-IIC-Real-Time-Clock-Module-For-Arduino-p-958134.html?rmmds=myorder RTC DS3231] *un régulateur 3,3V , LM1117 ( ou équivalent) avec deux condensateurs de 10 μF *un mosfet IRF520 *une diode 1N4007 *une photorésistance *une résistance 1 KOhms et une résistance 330 Ohms *une [https://www.amazon.fr/gp/product/B00EDLDDLU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 batterie au plomb 6V 4Ah] *un [https://www.banggood.com/6V12V-10A-PWM-Auto-Solar-Panel-Charge-Controller-Battery-Charger-Regulator-p-1062178.html?rmmds=myorder contrôleur de charge charge solaire] * deux [https://www.banggood.com/12V-3W-Polycrystalline-145mm-x-145mm-Solar-Panel-Photovoltaic-Panel-p-999719.html?rmmds=myorder panneaux solaires 12V 3W] * un câble [https://www.banggood.com/1m-U_FLIPX-to-RP-SMA-Antenna-Pigtail-Jumper-Cable-p-979462.html?rmmds=myorder U.FL vers RP-SMA] de 1m environ * une [https://www.banggood.com/2_4GHz-10dBi-Wireless-Wifi-Antenna-Booster-WLAN-RP-SMA-p-940255.html?rmmds=search antenne wifi RP-SMA] * Ruban de [https://www.banggood.com/1M-5050-SMD-60LED-Flexible-LED-Strip-Light-RGBRedBlue-Non-Waterproof-12V-p-974791.html?rmmds=myorder leds blanches 12V] * un [https://www.banggood.com/LM2587-DC-DC-Boost-Converter-5A-3-30V-Step-Up-to-4-35V-Power-Supply-Module-p-1135387.html?rmmds=search élévateur de tension] * un interrupteur à bascule * des connecteurs mâles/femelles pour circuit imprimé * un bornier * une plaque d'essai * du fil électrique * de la soudure Pour la structure: * une planche de contreplaqué ( environ 400 * 300 * 40 mm) * 4 boulons M4 60mm * 4 boulons M4 30mm * de la peinture * une boite de dérivation 80 * 80 mm * de l'adhésif double face * une plaque de plexiglas ( environ 350 * 170 * 4 mm) * des serflexse * une plaque de plexiglas ( environ 350 * 170 * 4 mm) * des serflexs)
• Boite aux lettres connectée  + (<u>Pour l’électronique:</u> *u … Pour l’électronique: *un [https://www.banggood.com/ESP8266-ESP-07-Remote-Serial-Port-WIFI-Transceiver-Wireless-Module-p-961247.html?rmmds=search ESP8266 ESP-07] et son [https://www.banggood.com/Serial-Port-WIFI-ESP8266-Module-Adapter-Plate-With-IO-Lead-Out-For-ESP-07-ESP-08-ESP-12-p-1056660.html?rmmds=search support] *une [https://www.banggood.com/3Pcs-DS3231-AT24C32-IIC-Real-Time-Clock-Module-For-Arduino-p-958134.html?rmmds=myorder RTC DS3231] *un régulateur 3,3V , LM1117 ( ou équivalent) avec deux condensateurs de 10 μF *un mosfet IRF520 *une diode 1N4007 *une photorésistance *une résistance 1 KOhms et une résistance 330 Ohms *une [https://www.amazon.fr/gp/product/B00EDLDDLU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 batterie au plomb 6V 4Ah] *un [https://www.banggood.com/6V12V-10A-PWM-Auto-Solar-Panel-Charge-Controller-Battery-Charger-Regulator-p-1062178.html?rmmds=myorder contrôleur de charge charge solaire] * deux [https://www.banggood.com/12V-3W-Polycrystalline-145mm-x-145mm-Solar-Panel-Photovoltaic-Panel-p-999719.html?rmmds=myorder panneaux solaires 12V 3W] * un câble [https://www.banggood.com/1m-U_FLIPX-to-RP-SMA-Antenna-Pigtail-Jumper-Cable-p-979462.html?rmmds=myorder U.FL vers RP-SMA] de 1m environ * une [https://www.banggood.com/2_4GHz-10dBi-Wireless-Wifi-Antenna-Booster-WLAN-RP-SMA-p-940255.html?rmmds=search antenne wifi RP-SMA] * Ruban de [https://www.banggood.com/1M-5050-SMD-60LED-Flexible-LED-Strip-Light-RGBRedBlue-Non-Waterproof-12V-p-974791.html?rmmds=myorder leds blanches 12V] * un [https://www.banggood.com/LM2587-DC-DC-Boost-Converter-5A-3-30V-Step-Up-to-4-35V-Power-Supply-Module-p-1135387.html?rmmds=search élévateur de tension] * un interrupteur à bascule * des connecteurs mâles/femelles pour circuit imprimé * un bornier * une plaque d'essai * du fil électrique * de la soudure Pour la structure: * une planche de contreplaqué ( environ 400 * 300 * 40 mm) * 4 boulons M4 60mm * 4 boulons M4 30mm * de la peinture * une boite de dérivation 80 * 80 mm * de l'adhésif double face * une plaque de plexiglas ( environ 350 * 170 * 4 mm) * des serflexse * une plaque de plexiglas ( environ 350 * 170 * 4 mm) * des serflexs)
• Design a 3D object in Tinkercad  + (A computer or tablet with internet connection)
• Water Bottle fan  + (An empty bottle of water (500ml) Super glue Seal tape Marker pen Switch Wires Mortar Battery Soldering wires)
• Water Bottle fan  + (An empty bottle of water (500ml) Super glue Seal tape Marker pen Switch Wires Mortar Battery Soldering wires)
• Node LoRa Arduino Mini Pro 3V/RFM95  + (Arduino Mini Pro 3V Module RFM95 Boitier pour 2 piles AA Vis en plastiques Stripboard (double face) Câbles (Wire Wrapping Cable AWG30) Broches mâles/femelles Interrupteur ON/OFF Led/Résistance (Optionnel))
• OpenKnit: digital fabrication tool to create your own clothes  + (Bill of materials (updates) [https://githu … Bill of materials (updates) [https://github.com/g3rard/OpenKnit/tree/master/Wally120/bill_of_materials available here]. * Two 800x3 mm aluminum strips * Two 800x2 mm aluminum strips * Two 30x30x162 mm aluminum bars * Two 30x30x300 mm aluminum bars * Two 20x20x800 mm aluminum bars * Two 30x30x800 mm aluminum bars * Two 15x15x800 mm aluminum T-profile * One Arduino Leonardo * One micro interruptor * One rotary encoder * One axial bearing * One stepper motor * One timing pulley * Six threaded rods, sizes: 2x16 2x17 and 2x22 mm * 120 Knitmaster empisal silver knitting machine needles * Four servo motors * Four servo motor driver * One timing belt * 16 v-groove bearings * One block of paraffine * One bag Molex c-grid plastic holders: 4-pin, 3-pin and 2-pin * One bag Molex c-grid female pins * Phone cable on a reel (5 meter minimum) * 120 paperclips 32 mm type N.2 * One piano hinge 510 mm * Two wooden strips: flat on one side, a hole every 60 mm * One rass rod 1.5 mm * A bag of pin headers, male and female * One terminal block * One switching power supply * One cross-shaped bead '''Bolts and nuts, in generous amounts''' * M3 tapered 7 mm * M3 tapered 10 mm * M3 tapered 12 mm * M3 tapered 16 mm * M3 tapered 20 mm * M3 tapered 30 mm * M3 flat head 8 mm * M3 flat head 10 mm * M3 flat head 12 mm * M3 flat head 16 mm * M3 flat head 20 mm * M3 flat head 30 mm * M3 regular nuts * M3 nylock * M3 washers * M8 nuts and bolts (only a few) * M8 washers (only a few)lts (only a few) * M8 washers (only a few))
• Intro  + (Laptop and Internet)
• Déployer une passerelle LoRaWAN pour The Things Network  + (Le contenu du Kit : * 1 Raspberry Pi 3 * 1 … Le contenu du Kit : * 1 Raspberry Pi 3 * 1 pont PRI 2 RHF4T002 * 1 module passerelle RHF0M301 * 1 carte microSD 16 Go * 1 cordon USB-microUSB20 cm * 1 antenne 868 MHz * 1 alimentation microUSB 5 Vcc/2,5 A * 1 cordon RJ45 20 cm * 1 module Seeeduino LoRaWAN avec GPS (cette carte compatible Arduino sert pour faire des tests avec la passerelle. Nous n'en parlerons pas dans ce tuto) * 1 cordon convertisseur USB-série * 1 cordon JST 10 cm Pour utiliser le Raspberry Pi 3: * 1 clavier * 1 câble HDMI * 1 écran HDMI Pour installer et utiliser la passerelle: * 1 accès à Internet par RJ45 ou Wi-File: * 1 accès à Internet par RJ45 ou Wi-Fi)
• The Things Network  + (Le contenu du Kit : * 1 Raspberry Pi 3 * 1 … Le contenu du Kit : * 1 Raspberry Pi 3 * 1 pont PRI 2 RHF4T002 * 1 module passerelle RHF0M301 * 1 carte microSD 16 Go * 1 cordon USB-microUSB20 cm * 1 antenne 868 MHz * 1 alimentation microUSB 5 Vcc/2,5 A * 1 cordon RJ45 20 cm * 1 module Seeeduino LoRaWAN avec GPS (cette carte compatible Arduino sert pour faire des tests avec la passerelle. Nous n'en parlerons pas dans ce tuto) * 1 cordon convertisseur USB-série * 1 cordon JST 10 cm Pour utiliser le Raspberry Pi 3: * 1 clavier * 1 câble HDMI * 1 écran HDMI Pour installer et utiliser la passerelle: * 1 accès à Internet par RJ45 ou Wi-File: * 1 accès à Internet par RJ45 ou Wi-Fi)
• Déployer une passerelle LoRaWAN pour The Things Network  + (Le contenu du Kit : * 1 Raspberry Pi 3 * 1 … Le contenu du Kit : * 1 Raspberry Pi 3 * 1 pont PRI 2 RHF4T002 * 1 module passerelle RHF0M301 * 1 carte microSD 16 Go * 1 cordon USB-microUSB20 cm * 1 antenne 868 MHz * 1 alimentation microUSB 5 Vcc/2,5 A * 1 cordon RJ45 20 cm * 1 module Seeeduino LoRaWAN avec GPS (cette carte compatible Arduino sert pour faire des tests avec la passerelle. Nous n'en parlerons pas dans ce tuto) * 1 cordon convertisseur USB-série * 1 cordon JST 10 cm Pour utiliser le Raspberry Pi 3: * 1 clavier * 1 câble HDMI * 1 écran HDMI Pour installer et utiliser la passerelle: * 1 accès à Internet par RJ45 ou Wi-File: * 1 accès à Internet par RJ45 ou Wi-Fi)
• MoodBoxByFaBteam  + (Necessary materials are listed here below … Necessary materials are listed here below by category.
  
  ==== For the box ====
  * poplar plywood 3mm-thick for laser cutting
  
  
  

  
  

  Poplar is pretty cheap and allows precise and fast laser cutting

  
  
  
  * brass bar 80x7x2mm - to change and increase the touching area with regards to the capacitive sensor
  
  
  

  
  

  A 1m-length brass bar can be found in DIY store for about 7€ but is easily replaceable by any conductive material whatever is shape.

  
  
  
  * transparent PLA for 3D printing:
  ** access door to base tier
  ** figurine's stand and support - the stand will also diffuse the LED-ring light
  ** button for volume control
  ** lateral joints
  * colored PLA (according to maker's preference) for the figurine and/or scenery set on top of the box
  
  ==== Electronic supplies ====
  * 1 Arduino Uno Rev.3
  * 1 MW power supply: 1500mA Rotary Switch Adaptor
  * 1 reversing switch KNX-1, 3A, 250V AC, to be used as main switch
  * 1 Seeed Studio potentiometer: Grove Rotary Angle Sensor (P)
  * 1 Seeed Studio capacitive sensor: Grove Touch Sensor
  * 1 Adafruit LED-ring: Neopixel Ring 12 x 5050 RGB
  * 1 Seeed Studio MP3-player: Grove MP3 v2.0
  * 1 micro SD-Card to store the playlist
  * 1 Seeed Studio Gear Stepper Motor with Driver: Step Motor 28BYJ-48 5V DC
  * 1 Adafruit BME280 sensor: temperature, humidity, pressure (ADA2652)
  * 1 Seeed Studio "Base Shield V2"
  
  ==== Misc. ====
  * wood glue, to assemble and joint laser cut parts of the box tiers
  * cyanoacrylate glue
  * some screws to fasten sensors and other components inside the box tiers
  * cables and jumper wires screws to fasten sensors and other components inside the box tiers<br />* cables and jumper wires)
• MoodBoxByFaBteam  + (Necessary materials are listed here below … Necessary materials are listed here below by category.
  
  ==== For the box ====
  * poplar plywood 3mm-thick for laser cutting
  
  
  

  
  

  Poplar is pretty cheap and allows precise and fast laser cutting

  
  
  
  * brass bar 80x7x2mm - to change and increase the touching area with regards to the capacitive sensor
  
  
  

  
  

  A 1m-length brass bar can be found in DIY store for about 7€ but is easily replaceable by any conductive material whatever is shape.

  
  
  
  * transparent PLA for 3D printing:
  ** access door to base tier
  ** figurine's stand and support - the stand will also diffuse the LED-ring light
  ** button for volume control
  ** lateral joints
  * colored PLA (according to maker's preference) for the figurine and/or scenery set on top of the box
  
  ==== Electronic supplies ====
  * 1 Arduino Uno Rev.3
  * 1 MW power supply: 1500mA Rotary Switch Adaptor
  * 1 reversing switch KNX-1, 3A, 250V AC, to be used as main switch
  * 1 Seeed Studio potentiometer: Grove Rotary Angle Sensor (P)
  * 1 Seeed Studio capacitive sensor: Grove Touch Sensor
  * 1 Adafruit LED-ring: Neopixel Ring 12 x 5050 RGB
  * 1 Seeed Studio MP3-player: Grove MP3 v2.0
  * 1 micro SD-Card to store the playlist
  * 1 Seeed Studio Gear Stepper Motor with Driver: Step Motor 28BYJ-48 5V DC
  * 1 Adafruit BME280 sensor: temperature, humidity, pressure (ADA2652)
  * 1 Seeed Studio "Base Shield V2"
  
  ==== Misc. ====
  * wood glue, to assemble and joint laser cut parts of the box tiers
  * cyanoacrylate glue
  * some screws to fasten sensors and other components inside the box tiers
  * cables and jumper wires screws to fasten sensors and other components inside the box tiers<br />* cables and jumper wires)
• MA première foldarap  + (Pour la construction de cette imprimante, … Pour la construction de cette imprimante, je me suis fourmis sur internet, dans des magasins de bricolage et dans un magasin spécialisé ainsi qu'au FabLab. * '''Sur Internet :''' Touch bed, alimentations, coupleurs, roulements, tête chauffante, courroie, poulies, moteurs, lit chauffant, l'électronique, extrudeur, cosses, poussoirs. * '''Au magasin de bricolage :''' visseries, écrous, tiges filletées, bois (médium), cosses, frein filet, * '''Au magasin spécialisé :''' profilés, visserries, insers, interrupteur, gaines thermo-rectractables, * '''Au FabLab :''' les pièces imprimées et les conseils.:''' les pièces imprimées et les conseils.)
• Fusée à eau simple et rapide  + (Pour réaliser ce tutoriel, il vous faut * … Pour réaliser ce tutoriel, il vous faut * un tuteur plastifié droit 1,5 mètre de long, 11mm de diamètre (disponible en grande surface de bricolage, environ 2€) * du tube IRL 16mm de diamètre, une chute de 15cm suffit. moins d'un euro les 2 mètres * du duct tape, un classique du maker * une bouteille de boisson gazeuse * un bouchon de bouteille de bière * un gros élastique * du carton pour les ailerons, facultatif mais utile pour une plus jolie trajectoiremais utile pour une plus jolie trajectoire)
• Fusée à eau simple et rapide  + (Pour réaliser ce tutoriel, il vous faut * … Pour réaliser ce tutoriel, il vous faut * un tuteur plastifié droit 1,5 mètre de long, 11mm de diamètre (disponible en grande surface de bricolage, environ 2€) * du tube IRL 16mm de diamètre, une chute de 15cm suffit. moins d'un euro les 2 mètres * du duct tape, un classique du maker * une bouteille de boisson gazeuse * un bouchon de bouteille de bière * un gros élastique * du carton pour les ailerons, facultatif mais utile pour une plus jolie trajectoiremais utile pour une plus jolie trajectoire)
• Une table de nuit en caisse en bois  + (Une caisse à vin Du masking tape ou de l’adhésif de masquage De la peinture)
• Une table de nuit en caisse en bois  + (Une caisse à vin Du masking tape ou de l’adhésif de masquage De la peinture)
• GPS Piéton  + (Vous trouverez dans la documentation (lien GitHub) tout ce dont vous avez besoin pour fabriquer un bracelet connecté à une application Android.)
• GPS Piéton  + (Vous trouverez dans la documentation (lien GitHub) tout ce dont vous avez besoin pour fabriquer un bracelet connecté à une application Android.)
• Gufa mama  + (Water Bottles. empty box Black and while tape. <br/>)
• Laser cut Spirograph  + (computer with internet connection)
• Minetest and 3D printing  + (computer with internet connection Vr headset (google cardboard ok))
• Minetest and 3D printing  + (computer with internet connection Vr headset (google cardboard ok))
• Solar Charger  + (·        Solar panel of (10v) optional ·        Diode ·        Resistors ·        Regulator(5MA-20AM) ·        Capacitors of (10-100) ·        LED light of(2v or 3v) ·        Jumper wire ·        Circuit board ·        Bread board)
• DIY Solar Charger  + (·        Solar panel of (10v) optional ·        Diode ·        Resistors ·        Regulator(5MA-20AM) ·        Capacitors of (10-100) ·        LED light of(2v or 3v) ·        Jumper wire ·        Circuit board ·        Bread board)
• Solar Charger  + (·        Solar panel of (10v) optional ·        Diode ·        Resistors ·        Regulator(5MA-20AM) ·        Capacitors of (10-100) ·        LED light of(2v or 3v) ·        Jumper wire ·        Circuit board ·        Bread board)
• TonUINO  + (Il existe différentes variantes pour pouvo … Il existe différentes variantes pour pouvoir composer son kit TonUINO et vous pouvez tout à fait choisir des composants équivalents. La liste que vous trouverez ci-dessous est celle du matériel que j’ai utilisé. *[https://www.amazon.fr/gp/product/B07JLBGYQ6/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Un kit TonUINO du fournisseur allemand AZDelivery] *[https://www.az-delivery.de/fr/products/40-stk-jumper-wire Des jumpers femelle / femelle] *[https://www.amazon.fr/Wentronic-Universal-passive-Holders-passives/dp/B005AAQTXC/ref=sr_1_8?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1FZ109OWXYHHY&dib=eyJ2IjoiMSJ9.p-mwV6fB5pxwoUu2hkeWIdBnbFNPARDuBoOB24871z96gWSP6vJYEwN4bJD6vd3T-gooD8hq1GWB_PEShV0rqZgsMqwfKnnSqCdfY4b3_I1UODii0YHjyL8SRHPLCyYVytJNMMmW0f2r9szgzuEReqjC9Oi7nBee0IaNkXLpneBUWhtOi-CK2HIuItYor17mNeR0jdoSI8e39NCPXu3Km--sId6-vw8mr_W5Ay3LyoMWhMolymVIKSEuD3Gtd6rPzD65XJq5EVIbHVGP8YhKgv06cR_9Iv4woxZSqp2vNVe8IUE3svP-o6YRnCPk_iONnLYbOAuftOhk3SXpTgbEmTF8eVagZT3tuRsHbnqm7dUaOgfG-wY4ymXPnv4MdLv4BRSW8x16fN3mILrZxFoC3HclyMVHaXS5wHs42WyiG4ISd81y27il3LHHy4oI4KGj.-DKfdfkhU2Mv_elmezYvje7K9pEdXqyqrfxKat_HhMs&dib_tag=se&keywords=support+pile+9v&qid=1740043741&sprefix=support+pile+9v%2Caps%2C75&sr=8-8 Un support de pile 9V] *[https://www.amazon.fr/gp/product/B0B2JMW4LV/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Un câble mini USB vers USB pour transférer les données sur la carte Arduino] *[https://www.amazon.fr/gp/product/B08CY5437N/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Un interrupteur on/off] *[https://www.amazon.fr/gp/product/B09MRK24PP/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Un petit haut-parleur] *[https://www.amazon.fr/gp/product/B07LGCHSNC/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Une carte MicroSD] *[https://www.amazon.fr/dp/B01MRWL6DW?psc=1&ref=ppx_yo2ov_dt_b_product_details Des boutons d’arcade] *[https://www.amazon.fr/ITSON-Blister-Alcaline-6LR61-ItsPOWER/dp/B0CNTPFSLT/ref=sr_1_3_sspa?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3SFFHK1BU153J&dib=eyJ2IjoiMSJ9.kc9C7AGoyS7EoYQ5anccteGusBz1vo0pSGglv-DaTJWq2FLVAwYD0TAREhd6uGwdNMWCpbAW6A_2nFH53NsTMSKvMH7jbmBPMHQZlxqe7-lJ_V5f2zfmD0ifhphB1hVsvSzKa679zreDvhZbsQFDKyS2-KrdMLzZoKJvNr1VsMTnPzd1-RMqJ2Vp5b7v9-0dq-qg-9-o0B4Pr0xoXoZYog7PWvxSPHIQeJJUisaPoTj228FRKv3rgtVj9rbN5zvaj1g3lEzmpGua6L0CBF0qSB1tzWSj9IK2YURf5JqWbLc.tZhSKHlXK00PY7jie9E-TOI29FtBQmJNJeAX4B-UmtI&dib_tag=se&keywords=pile+9v&qid=1740043858&sprefix=pile+9v%2Caps%2C89&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 Une pile 9V] *[https://www.amazon.fr/dp/B08QRR8P3F?psc=1&ref=ppx_yo2ov_dt_b_product_details Une résistance 1kOhm]qid=1740043858&sprefix=pile+9v%2Caps%2C89&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 Une pile 9V]</u> *[https://www.amazon.fr/dp/B08QRR8P3F?psc=1&ref=ppx_yo2ov_dt_b_product_details <u>Une résistance 1kOhm</u>])
• Energy module for People Pedal Power  + (- Supercapacitor (here 165F 48V) - Inverter (here 800VA) - Electric connections, switched and wires - DC/DC converter)