Author Auguste & Claire | Last edit 9/12/2019 by Clementflipo
IKEA_HACK_01.jpg en none Creation 0
For furniture:
For drawer handles:
And above all: a TARVA Chest of 3 drawers (€59.90 at IKEA)
A hand sander (or sandpaper fine grain) gloves a ruler and pencil A small roll, a fine brush
Scoring pencil every 7.5 cm on the long sides of each drawer. Then connect the dots on each other to show the diamonds.
Sawing Saw on the lines a few millimeters thick.
Then pinch the drawers and the parts to paint grain 120. We decided to paint the sides in more drawers, and leave the feet and the raw wood shelf.
Then suck out the whole and the part where you will paint, and have a last shot microfiber cloth to remove the last dust.
Delineate the edges with masking tape to paint to have good net paint strokes.
You can spend two satin white lacquer layers as if you want a slightly satin appearance.
The lacquer brings out the relief cutouts.
Screw the brass knobs. Each drawers: First screw one piece, then insert the tube into the nozzle screw and snap the second front end screw it.
The diamond texture drawers was inspired Superfront us, this Swedish company that has had the brilliant idea to market finishes to "pimp" your IKEA furniture: feet, handles, doors, etc.
If you do not know their concept, it is time to find out! For handles, you should know that we love the copper and when the issue arose, we first thought of placing small elbows only to replace existing buttons. Then we still had tubes in stock and found that it was actually very convenient to have these bars to open the drawers!
Published
You entered an invalid page name, with one or many of the following characters :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #