Polyurethane, a polymer with special properties that combine flexibility and lightweight with resistance to impact, abrasion, and corrosion, is used to make car Tucson Paint Protection coatings.
Difficulté
Facile
Durée
2 heure(s)
Catégories
Sport & Extérieur
Coût
0 USD ($)
Introduction
Did you know that a car's color can be protected from the sun and the impact of gravel and stones? Using a Tucson Paint Protection Film (a clear paint thermoplastic polyurethane film that is placed on the painted surface of used or new cars to protect the paint from UV rays, small abrasions, bug splatters, and stone chips) to shield the paint on the most exposed areas of your car is a smart idea if you want to shield it from the effects of stones, insects, or dirt in general, in addition to the weather's effects (sun, rain, hail, etc.).
Paint Protective film benefits
Polyurethane, a polymer with special properties that combine flexibility and lightweight with resistance to impact, abrasion, and corrosion, is used to make car Tucson Paint Protection coatings. It is also nearly undetectable and translucent. After installation, the paint's sheen has increased, that's the only visible change.
Furthermore, being an acrylic adhesive, its flexibility is maximum, allowing it to be installed on any type of surface, be it the hood or the bumper, and even on rearview mirrors, headlights, and other specific areas exposed to external aggressions.
It is also worth noting that it is a very durable material and some models have a self-healing effect or self-regenerative function, meaning that light scratches disappear in a matter of seconds. They can be removed whenever you want and do not leave any residue or damage to the original paint.
Given their advantages, Tucson Paint Protection films are very useful for 4x4s. It is very common for these vehicles to get scratched by branches, stones, and gravel, so by covering the exposed areas we prevent unsightly scratches from appearing.
Installing car paint protection film
The steps to install a Tucson Paint Protection film are as follows:
- Thoroughly clean the entire area with a soapy water solution.
- Cut the film to the desired size without removing the protective strip yet.
- Wet your hands with soap and water to avoid leaving fingerprints when handling it.
- When touching it, moisten your hands with soap and water to prevent fingerprints from appearing.
- Take off the film's protective strip and use soap and water to spray the adhesive portion of the film as well as the surface you plan to put it on.
- The hardest part is about to begin: applying the film on the surface. Stick the film's end and slowly unroll it while misting the surface and the film's sticky portion with soapy water, all without removing the protecting strip completely.
- Throughout the procedure, eliminate any arising air bubbles with a rubber spatula.
- Take off the protective film off the film after making sure there are no bubbles.
- Using a cutter, cut off the excess film.
- Finish by applying heat with a hairdryer so that the film adheres better and lasts longer.
Conclusion
Tucson Paint Protection Film protects against environmental damage and wear. By using this long-lasting, self-healing film, you can keep your car's paint looking brand new even after being exposed to stones, insects, and harsh weather. The ease of installation and high-quality protection make it an excellent choice for any car owner.
Matériaux
Outils
Étape 1 -
Published
Français
English
Deutsch
Español
Italiano
Português