Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

# Please follow these steps to upload the … # Please follow these steps to upload the complete code using Arduino and power on the ESP32: ## Connect the ESP32 to your computer using a USB cable. ## Open the Arduino IDE and select the appropriate board and port from the "Tools" menu. ## Copy and paste the complete code into the Arduino IDE. ## Click the "Upload" button (or use the shortcut Ctrl+U) to compile and upload the code to the ESP32. ## Wait for the upload process to finish, ensuring there are no errors. ## Once the code is uploaded, disconnect the ESP32 from the computer. ## Power on the ESP32 by connecting it to a suitable power source. # Open the serial monitor and set the baud rate to 115200. Then, check the connection status of the ESP32 by monitoring the output in the serial monitor. # Use the MQTTX client to establish a connection with the MQTT broker and publish messages such as Hi, I'm MQTTX to the ESP32. as <code>Hi, I'm MQTTX</code> to the ESP32. +

<nowiki>Copy the full code into your … Copy the full code into your IDE. Feel free to change things like the text it prints, etc

 1 #include 
 2 #include 
 3 
 4 // WiFi
 5 const char *ssid = "xxxxx"; // Enter your Wi-Fi name
 6 const char *password = "xxxxx";  // Enter Wi-Fi password
 7 
 8 // MQTT Broker
 9 const char *mqtt_broker = "broker.emqx.io";
10 const char *topic = "emqx/esp32";
11 const char *mqtt_username = "emqx";
12 const char *mqtt_password = "public";
13 const int mqtt_port = 1883;
14 
15 WiFiClient espClient;
16 PubSubClient client(espClient);
17 
18 void setup() {
19     // Set software serial baud to 115200;
20     Serial.begin(115200);
21     // Connecting to a WiFi network
22     WiFi.begin(ssid, password);
23     while (WiFi.status() != WL_CONNECTED) {
24         delay(500);
25         Serial.println("Connecting to WiFi..");
26     }
27     Serial.println("Connected to the Wi-Fi network");
28     //connecting to a mqtt broker
29     client.setServer(mqtt_broker, mqtt_port);
30     client.setCallback(callback);
31     while (!client.connected()) {
32         String client_id = "esp32-client-";
33         client_id += String(WiFi.macAddress());
34         Serial.printf("The client %s connects to the public MQTT broker\n", client_id.c_str());
35         if (client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
36             Serial.println("Public EMQX MQTT broker connected");
37         } else {
38             Serial.print("failed with state ");
39             Serial.print(client.state());
40             delay(2000);
41         }
42     }
43     // Publish and subscribe
44     client.publish(topic, "Hi, I'm ESP32 ^^");
45     client.subscribe(topic);
46 }
47 
48 void callback(char *topic, byte *payload, unsigned int length) {
49     Serial.print("Message arrived in topic: ");
50     Serial.println(topic);
51     Serial.print("Message:");
52     for (int i = 0; i < length; i++) {
53         Serial.print((char) payload[i]);
54     }
55     Serial.println();
56     Serial.println("-----------------------");
57 }
58 
59 void loop() {
60     client.loop();
61 }

i">0; i < length; i++) { 53 Serial.print((char) payload[i]); 54 } 55 Serial.println(); 56 Serial.println("-----------------------"); 57 } 58 59 void loop() { 60 client.loop(); 61 } </pre></div></nowiki>

Before we begin, we need to ensure you hav … Before we begin, we need to ensure you have an MQTT broker to communicate and test with. We can download [https://mqttx.app/ MQTTX] (the front-end broker) to ensure communication. MQTT is a lightweight messaging protocol designed for efficient communication between devices in low-bandwidth, high-latency networks. It uses a publish-subscribe model, which we will go over later.
model, which we will go over later. +
Ensure that the ESP32 dev library is insta … Ensure that the ESP32 dev library is installed, then go to libraries in the Arduino IDE and download PubSubClient. PubSub, short for Publish/Subscribe, is a messaging pattern where senders (publishers) distribute messages to receivers (subscribers) without directly communicating with them. Publishers send messages to a central hub (broker), which then distributes them to all interested subscribers based on their topic subscriptions. This is useful to conserve data when trying to share information, because rather than multiple different connections between the publisher and each subscriber, the publisher only needs to send the information once.r only needs to send the information once. +