Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- At the bottom of the house's ribs you can find set of 3mm holes. If necessary, you can use them to fix the house to the ground using a cord and metal tent pegs. +
- Depending on how solid and resistant you w … Depending on how solid and resistant you want your house to be you can apply wood stain and varnish. For exterior use, varnish is absolutely necessary. Wood stain/finish can provide additional protection and a nice finish to your object. You can choose different types and colors. Varnish (marine or other type) is a great tool to make your object resistant to humidity or insects and give it a nice finish. Also, after assembling the object, it will glue it together and fill in small cracks. Apply varnish and wood stain with a brush. Don’t forget to wash it really good after each use.get to wash it really good after each use. +
- Depending on where you live, there’s a pos … Depending on where you live, there’s a possibility that you will want to protect cats from the cold weather. There are multiple options, for extreme cold you could install rigid insulation boards or cork sheets (2 or more mm) Both are very easy to cut with scissors or cutter (cork even with laser cutter).s or cutter (cork even with laser cutter). +
- Enjoy! :) +
- Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue. +
- If you want to use this object in exterior … If you want to use this object in exterior you need to protect its wooden legs against the humidity. One of the options is to print leg protection on a 3D printer. This option can be useful also if you want to protect your floor. It is possible that the print will still be sharp so you will have to sand it on the edges. so you will have to sand it on the edges. +
- These are the parts you should cut on lase … These are the parts you should cut on laser cutter. Consider using wood stain and first layer of varnish before the assembly You need to cut the planks into the pieces using a laser cutter with working area min. 80x50cm (31.5 x 19.7 inch). You can get an access to this machines in various places - fablabs, makerspaces, hackerspaces or commercial services like TechShop or others. * Map of fablabs: [https://www.fablabs.io/labs/map www.fablabs.io/labs/map] * Map of fablabs and other labs: [http://www.makery.info/en/map-labs www.makery.info/en/map-labs] * Map of makerspaces: [http://themakermap.com/ themakermap.com] There’s much more, not all of the places are listed in all maps, you can also try to research it by yourself.u can also try to research it by yourself. +
Français
English
Deutsch
Español
Italiano
Português