Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- Carefully pull the grey cable up from the … Carefully pull the grey cable up from the tube to fish out the black connector and uplug it to release the controller board. If you are having trouble pulling the cable up, back off the four bolts that hold the handlebars to the upright tube as it can often get caught by them.t tube as it can often get caught by them. +
- Release the cable-tie and pop off the rubber thimble to expose the three control connectors and carefully unplug these. The black/blue/red connector is for the brake lever, yellow/white the headlight and the red/green/black is for the throttle. +
- The headlight unit is held to the front of the scooter with '''two small cross head screws''', one on-top and one below. Removing them both will allow you to pop it from the front, pulling the cable through the resulting hole. +
- Using your nails or a plastic spudger, carefully lift the two plastic covers from the top of the stem. They are held on with foam tape so a hairdryer on a cool setting can warm the adhesive and aide the release if you are having difficulty. +
- With the scooter powered down, unscrew the three small cross-head screws securing the control board and carefully lift it up and out. +
Français
English
Deutsch
Español
Italiano
Português