Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- For this step, you will need a ¾” 4-Way Ou … For this step, you will need a ¾” 4-Way Outlet, two 7-inch long ¾” tubes, and two ¾” Wyes. It's time to build both side frames of your dog wheelchair. The diagram provided shows only the left side frame, so begin by assembling it. Then, create a second frame that mirrors the design shown above.frame that mirrors the design shown above. +
- For this step, you will need a ¾” elbow, a … For this step, you will need a ¾” elbow, a 6-inch long ¾” tube, a 3-inch long ¾” tube, a ¾” tee, a 13-inch long ¾” tube, and a ¾” cap. The diagram provided illustrates half of your front frame. Therefore, you need to replicate this structure twice (x2). The second frame should mirror the one shown above, essentially appearing identical but in reverse. Attach the 6-inch long ¾” tube to the ¾” elbow. Then, connect this piece to the central hole of the ¾” tee. Attach the 3-inch long ¾” tube to the right hole of the tee, and the 13-inch long ¾” tube to the remaining hole. Finally, cap the end of the 13-inch tube with the ¾” cap. Once completed, you should have two identical halves of your front frame. We will revisit these later in the assembly process.visit these later in the assembly process. +
- To complete this section, gather two ¾” el … To complete this section, gather two ¾” elbows, two 5-inch long ¾” tubes, and a 14-inch long ¾” tube. Constructing the back frame of your dog wheelchair should be straightforward, requiring only one of these assemblies. Connect all five parts as indicated in the graphic above, then set this assembly aside.aphic above, then set this assembly aside. +
- We're nearly finished! Let's now join all … We're nearly finished! Let's now join all the pieces together. For this final step, you'll need just two more 14-inch PVC tubes. Use these tubes to connect both sides of all your frames. Then, proceed to connect your back frame and wheels. And that's it! Did you have fun assembling this dog wheelchair? If you know anyone who might find it useful, please share this wikifab with them.eful, please share this wikifab with them. +
- You will require a 6.2-inch long ¾” tube, … You will require a 6.2-inch long ¾” tube, a ¾” adapter, and a 10-inch wheel with a tee made of black steel. We will begin by constructing the wheelbase, creating two identical units. Follow the same procedure for both wheels, referring to the diagram above for the required parts (x2). Insert the 6.2-inch long ¾” tube into the ¾” adapter. Then, place the assembled adapter into the 10-inch wheel with tee, as shown in the diagram. Once completed, set them aside until you are ready to attach them to the frame later on.eady to attach them to the frame later on. +
Français
English
Deutsch
Español
Italiano
Português