Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• '''Sanding''' The sanding makes the boxes … '''Sanding''' The sanding makes the boxes nice looking. The wood burn should be sanded to prevent to black color to be spread. The grooves should be sanded to allow the mid plates to slide in easily. '''Varnishing''' The varnish makes te boxes watertight. Apply two layers of wood varnish to each element. Check the instructions that are dependent of the type of varnish.that are dependent of the type of varnish.  +
• Assemble the box following the laser cut i … Assemble the box following the laser cut indications. # Fix the side plates and the bottom plate with screws in the laser cut holes. # Have fun assembling the module to your own ‘goesting’ (cf. Most beautiful Dutch word of 2004) # Fix the top borders to the sides to hold the second frame on top. Now you have the frame ready to fill it in to your own imagination. What would you take outside with a cargo bike, knowing you have an energy source?o bike, knowing you have an energy source?  +
• Chamfer the side plates following the groo … Chamfer the side plates following the grooves engravings. The grooves are there to fit the mid plates that allow to make compartiments in the boxes. They are placed every 5cm over the whole length of the side plates. Use a 10mm chamfer head to make the grooves.e a 10mm chamfer head to make the grooves.  +
• Laser cut the nine elements following the … Laser cut the nine elements following the Laser Cutter DXF files. For a box of 300mm high use the templates: In 10mm plywood: * bottom one time * side1_30 two times * side2_30 two times * balk_pl1 two times * balk_pl2 two times * handle1 two times * handle2 two times In 9mm plywood: * mid_plate_1_30 two times (or more) * mid_plate_2_30 two times (or more) The wood will be burned on the sides, that's why it needs to be sanded later on.that's why it needs to be sanded later on.  +
• Prepare and set the parameters of the Laser Cutter to cut through 10mm plywood. Check you parameters and make a few test to find the good settings. This is dependent on the type of machine.  +