DIY standing desk made from 2x12s and plumbers pipe. +
Easy +
hour(s) +
The height of the desk can be adjusted by switching out different sections of pipe. +
faux +
Hmm ep74 standingdesk option4.jpg +
* 2"x12"x12' Board (We cut the 12’ board …
* 2"x12"x12' Board (We cut the 12’ board into two 5’6” lengths for our table top.)
* We used the mending plates to join the two tabletop boards together.
* 3/4" Diameter Black Iron Pipe (see the table)
* 3/4" Black Iron Couplings (see the table)
* 1/4" Black Drywall Screws (We used the screws to attach the mending plates and the legs.)
to attach the mending plates and the legs.)
+
* This project is also available [http://homemade-modern.com/ep74-standing-desk/ on my blog]
* Watch the video tutorial of this standing desk on [https://www.youtube.com/watch?v=whY_LeFFxgk my Youtube channel]
+
none +
I cut the boards to the finish length of 5’6” using a speed square to make sure I was getting a perfect right angle cut. +, Elle sanded all four sides of both boards taking special care to round all the edges and corners. +, Once all the dust was wiped from the boards, she used a rag to apply one coat of Danish oil. +, Elle assembled the legs using all the pipes and connectors. Putting them together is easy and fun, but make sure that the end result is straight and screwed together tightly. +, We placed the legs on the inside of the outermost plate about 6” in from the ends and 3” in from the sides. It can be a bit difficult to maneuver the drill so close to the pipes, but be sure to drill the screws straight into the wood. +, The floor of our workshop is a bit uneven, … The floor of our workshop is a bit uneven, so I adjusted the end caps to level the tables. There are many different options for the height of your desk. We listed the three that we found most useful for our needs. The exact height of the desk will fluctuate a bit depending on how tightly you're able to screw the pipes to the couplings. .
Good luck making your own standing desk and please email, tweet or hashtag photos to [https://twitter.com/BenUyeda @benuyeda], ben@homemade-modern.com or #homemademodern. For more detailed instructions, dimensioned drawings and different variations of the project, check out our soon-to-be-released book.t, check out our soon-to-be-released book. + et I attached the two 2”x12” boards together … I attached the two 2”x12” boards together with the mending plates. I centered the plates 4” in from the ends of the boards and then roughly 12” apart leaving about 6” of space between the middle two. Because it's important to keep the two boards as close as possible, I clamped one board to the worktable and had Elle pull the second board into the first as I screwed in the plates.into the first as I screwed in the plates. +
Date de modification« Date de modification (Modification date) » est une propriété prédéfinie qui correspond à la date de la dernière modification d’un sujet et est fournie par MédiaWiki Sémantique.
10:59:07, 9 décembre 2019 +
⧼cs-comments⧽Cette propriété est une propriété spéciale dans ce wiki.
0 +
Créateur de la pageCette propriété est une propriété spéciale dans ce wiki.
Aucune propriété ne pointe vers cette page.
Français
English
Deutsch
Español
Italiano
Português