Difference between revisions of "ESP32 DHT22 IFTTT"

Line 36: Line 36:
|Step_Content=<translate>Go to https://ifttt.com/join
|Step_Content=<translate>Go to https://ifttt.com/join
Create an account  
Sign up and create an account using the appropriate options

Revision as of 18:04, 14 January 2023

Author avatarSid | Last edit 15/01/2023 by Disisid


ESP32 connected to DHT22, to read temperature and humidity. Use IFTTT to create a webhook applet and write the DHT22 measured values to a google sheets document



Step 1 - Install Thonny or Other Python IDLE

You will need a Python IDE such as Thonny for this project. You can use any IDE, but for this project, we are using Thonny. To install and use Thonny:

Step 2 - Setup Circuit

This is how your circuit should look like. You will need the ESP32 microcontroller, DHT22 temp/humidity module, breadboard and jumper wires.

  • + pin on DHT22 to VCC on ESP
  • out pin on DHT22 to GPIO pin 15 on ESP(can change depending on code)
  • - pin on DHT22 to GND on ESP

Step 3 - Setup IFTTT

Go to https://ifttt.com/join

Sign up and create an account using the appropriate options

Step 4 - Create a new applet

First, click create in the upper right hand corner

Step 5 - Set up Applet

Then, hit Add next to IF THIS

Step 6 - Select webhooks

Once you are on "choose a service", type in Webhooks in the search bar and click Webhooks

Step 7 - Select request type

On webhooks, select receive a web request

Step 8 - Set up Webhooks Account

- If you already have a webhooks account, skip this step

Otherwise, click the connect button and follow the steps on their website to create a webhooks account

Step 9 - Name event for trigger

Name the event for the trigger esp32 (it is case sensitive so be careful)

Step 10 - Set up reaction

Once the trigger is set up, click Add next to Then That

Step 11 - Select google sheets

In the search bar, search sheets and click google sheets

Step 12 - Set up sheets

Select Add row to spreadsheet

Step 13 - Connect to sheets

Click the Connect button

Step 14 - Sign in using gmail

Use your gmail to sign in to sheets

Step 15 - Configure spreadsheet

Select all the values you want returned to the spreadsheet, along with the path the sheet has to follow in your drive.

For this project, we are returning Temperature and Humidity values from the DHT22, so we will select Value1 and Value2

Step 16 - Finish applet

Once you have finished all the previous steps, hit continue on the applet page

Step 17 - Name applet

Rename the applet to an appropriate name

Step 18 - Get API key

Select the Webhooks icon on the finished page

Step 19 - Go to documentation

Click documentation on the webhooks page

Step 20 - Copy API key

Once you get onto this page, copy the api key and URL to paste into the code in Thonny

Step 21 - Source Code for thonny (insert api key and URL from previous step)

import network
import urequests as requests
from machine import Pin
from dht import DHT22
from time import sleep
#Replace the values below with the correct WIFI SSID and Password
wifi_ssid = "WIFI NAME"
wifi_password = "WIFI PASS"

#This is the webhook URL with API Key from IFTTT

webhook_url = "https://maker.ifttt.com/trigger/esp32/with/key/<insert api key here>"

sta_if = network.WLAN(network.STA_IF)

if sta_if.isconnected() == False:
    sta_if.connect(wifi_ssid, wifi_password)

while sta_if.isconnected() == False:
    #sta_if = network.WLAN(network.STA_IF)
    #sta_if.connect(wifi_ssid, wifi_password)
    print(".", end = "")

dht22 = DHT22(Pin(15))

while True:
    temperature = dht22.temperature()
    humidity = dht22.humidity()
    temp = temperature * 9/5 + 32
    url = webhook_url + "?value1=" +  str(temp) + " F" + "&value2=" + str(humidity) + "%"
        r = requests.get(url)
    except Exception as e:
        print(e, "error")

Step 22 - View output in spreadsheet

Go to whichever path you set the spreadsheet to in your drive