DIY Solar Charger

Auteur avatarDawa Edina Hillary | Dernière modification 4/07/2023 par Walthierer

Matériaux

·        Solar panel of (10v) optional

·        Diode

·        Resistors

·        Regulator(5MA-20AM)

·        Capacitors of (10-100)

·        LED light of(2v or 3v)

·        Jumper wire

·        Circuit board

·        Bread board

Outils

·        Wires(red and black)

·        Soldering iron

·        Soldering wire

·        Soldering grease

·        Helping hand

·        Sucker

·        Scissor

·        Multimeter

·        LED tester

Étape 1 - Drawing

Draw the diagram of the charger




Étape 2 - Asknet Box

 Open the ASKotec kit and get the tools and materials to use




Étape 3 - Tools and materials

  • Identify the tools and materials
  • Arranged the materials and the tools




Étape 4 - Test materials

Find the total voltage of the solar panel

Étape 5 - LED

Test the LED light voltage

Étape 6 - Calculations

 Calculate the Resistance

Étape 7 - Bread board

Get the bread board and place it at the helping hand

Étape 8 - Input wires

  • Fix a positive (+wire red in color) and negative (-wire black in color) for input source (power)

Étape 9 - Diode

  • Fix the diode

Étape 10 - Positive wire to the diode

Fix a positive wire from the input source (+wire) to the diode

Étape 11 - Resistor

Fix the resistors in positive side of the diode and have to be in series for easy calculation

Étape 12 - LED light

Fix the LED light to positive side of the resistors

Étape 13 - Regulator

Fix the regulator where the black side need to face your side

Étape 14 - Small Capacitor

Fix the small capacitor

Étape 15 - Big capacitor

Fix the big capacitor

Étape 16 - Regulator and diode

Connect the left pin of the regulator to the diode and resistors

Étape 17 - capacitor, diode, resistor and regulator

Connect the positive pin of the first capacitor to the join the diode, resistors and the left pin of the regulator

Étape 18 - Regulator and big capacitor

Connect the right pin of the regulator to the positive pin of the big capacitor

Étape 19 - Regulator and LED

Connect the middle pin of the regulator to the negative pin of the LED light

Étape 20 - Small capacitor to the LED

Connect the negative pin of the small capacitor to negative pin of the LED light

Étape 21 - Big capacitor and LED

Connect the negative pin of the big capacitor to negative pin of the LED light

Étape 22 - All negative sides

  In all connect the negative sides together

Étape 23 - Positive wire

Fix +wire to the positive pin of the big capacitor

Étape 24 - Negative

Fix –wire to the negative pin of the big capacitor

Étape 25 - Female USB

Connect the female USB to the +wire and –wire on the capacitor

Étape 26 - Test

Test the solar charger in the sun and test the output and charge the phone

Commentaires

Draft