Up toof the expansion I/O modu les can be used with a MicroLogix as both a Half-Duplex programming port and a Half-Duplex peer-to-peer messaging port. Controller Spacing =mm (2 in.) on all sides for adequate ventilation. MicroLogix Controller Dimension A user manual containing information on how to install, MicroLogix™ User Manual UM use and program your MicroLogix controller An overview of the See MicroLogix and MicroLogix Programmable Controllers Instruction Set Reference Manual, publication RM, for the MicroLogix and MicroLogix instruction set and for application examples to show the instruction set in use. Available in and point versions, the I/O count can be expanded by using rackless I/O modules Select MicroLogix Controllers Select MicroLogix Controllers MicroLogix Controllers Catalog Number Detail StepSelect: controllerreview power and I/O configurations to select a controller catalog number; see power supply and I/O specifications for more detailed information accessoriesmemory and real-time clock MicroLogix™ Programmable ControllersINA-ML-P Overview MicroLogix™ Controllers are suitable for use in an industrial environment when installed in accordance with these instructions. Specifically, this equipment is intended for use in clean, dry environments (Pollution degree(1)) and to When using spade lugs, use a small, flat-blade screwdriver to pry the finger-safe cover from the terminal blocks as shown below MicroLogix Controller The MicroLogix controller provides more computing power and flexibility than the MicroLogix controller to solve a variety of application needs. Select Family: MicroLogix, or ControllerController Specifications Controller General Specifications Attribute MicroLogix (Bulletin) MicroLogix The controller can also ex pand its I/O capabilities by using the same modules as the Micr oLogix controllers. MicroLogix can act as the master or as a slave on a Half-Duplex MicroLogix Controller Dimensions are in millimeters (inches). See your RSLogix ® programming software user documentation for more information on programming The input and output terminals of the MicroLogix controller are designed for a mm (in.) wide spade (standard for6 screw for up toAWG) or amm (metric4) fork terminal.
Up toof the expansion I/O modu les can be used with a MicroLogix as both a Half-Duplex programming port and a Half-Duplex peer-to-peer messaging port. Controller Spacing =mm (2 in.) on all sides for adequate ventilation. MicroLogix Controller Dimension A user manual containing information on how to install, MicroLogix™ User Manual UM use and program your MicroLogix controller An overview of the See MicroLogix and MicroLogix Programmable Controllers Instruction Set Reference Manual, publication RM, for the MicroLogix and MicroLogix instruction set and for application examples to show the instruction set in use. Available in and point versions, the I/O count can be expanded by using rackless I/O modules Select MicroLogix Controllers Select MicroLogix Controllers MicroLogix Controllers Catalog Number Detail StepSelect: controllerreview power and I/O configurations to select a controller catalog number; see power supply and I/O specifications for more detailed information accessoriesmemory and real-time clock MicroLogix™ Programmable ControllersINA-ML-P Overview MicroLogix™ Controllers are suitable for use in an industrial environment when installed in accordance with these instructions. Specifically, this equipment is intended for use in clean, dry environments (Pollution degree(1)) and to When using spade lugs, use a small, flat-blade screwdriver to pry the finger-safe cover from the terminal blocks as shown below MicroLogix Controller The MicroLogix controller provides more computing power and flexibility than the MicroLogix controller to solve a variety of application needs. Select Family: MicroLogix, or ControllerController Specifications Controller General Specifications Attribute MicroLogix (Bulletin) MicroLogix The controller can also ex pand its I/O capabilities by using the same modules as the Micr oLogix controllers. MicroLogix can act as the master or as a slave on a Half-Duplex MicroLogix Controller Dimensions are in millimeters (inches). See your RSLogix ® programming software user documentation for more information on programming The input and output terminals of the MicroLogix controller are designed for a mm (in.) wide spade (standard for6 screw for up toAWG) or amm (metric4) fork terminal.
Français
English
Deutsch
Español
Italiano
Português