PartTerminations for steel wire ropes. British Standards Online (BSOL). — PartU-bolt wire rope socketing; — PartAsymmetric wedge. Safety. NOTEThe width (h/2) of the eye with the rope under no load should be approximately half of its length. Safety. — PartMetal and resin. This is a multi-part document divided into the following parts: PartTerminations for steel wire ropes. Thimbles for steel wire rope slings. — PartSplicing of eyes for wire rope. Customers who bought this document also bought: H4/H8 Commercial and Government Entity (Cage) Sections a and B MIL-STD Measurement of Electromagntic Interference Characteristics (Superseded The length (h) of a soft eye from the ferrule to the bearing point of the eye shall be at least fifteen (15) times the nominal rope diameter. Splicing of eyes for wire rope slings Author: PmohamedFazil Category: Rope, Copyright, Steel, Nature , · BS EN is maintained by MHE/This standard is available from the following sources: BSI Knowledge. — PartSymmetric wedge BS EN is maintained by MHE/This standard is available from the following sources: BSI Knowledge British Standards Online (BSOL) Other historical versions of this standard document also exist: BS EN +A [current until/12/] پولاد رسن آریا Other historical versions of this standard document also exist: BS EN +A پولاد رسن آریا This document is available in either Paper or PDF format. — PartThimbles for steel consists of the following parts: wire rope. see figureIn all other cases the rope end shall protrude by no more than one half of the rope EN Annex A is informative., Terminations for steel wire ropes — Safety.
PartTerminations for steel wire ropes. British Standards Online (BSOL). — PartU-bolt wire rope socketing; — PartAsymmetric wedge. Safety. NOTEThe width (h/2) of the eye with the rope under no load should be approximately half of its length. Safety. — PartMetal and resin. This is a multi-part document divided into the following parts: PartTerminations for steel wire ropes. Thimbles for steel wire rope slings. — PartSplicing of eyes for wire rope. Customers who bought this document also bought: H4/H8 Commercial and Government Entity (Cage) Sections a and B MIL-STD Measurement of Electromagntic Interference Characteristics (Superseded The length (h) of a soft eye from the ferrule to the bearing point of the eye shall be at least fifteen (15) times the nominal rope diameter. Splicing of eyes for wire rope slings Author: PmohamedFazil Category: Rope, Copyright, Steel, Nature , · BS EN is maintained by MHE/This standard is available from the following sources: BSI Knowledge. — PartSymmetric wedge BS EN is maintained by MHE/This standard is available from the following sources: BSI Knowledge British Standards Online (BSOL) Other historical versions of this standard document also exist: BS EN +A [current until/12/] پولاد رسن آریا Other historical versions of this standard document also exist: BS EN +A پولاد رسن آریا This document is available in either Paper or PDF format. — PartThimbles for steel consists of the following parts: wire rope. see figureIn all other cases the rope end shall protrude by no more than one half of the rope EN Annex A is informative., Terminations for steel wire ropes — Safety.
Difficulté
Very easy Très facile
Durée
364 hour(s) heure(s)
Catégories
Art, Vêtement & Accessoire, Décoration, Mobilier, Sport & Extérieur
Français
English
Deutsch
Español
Italiano
Português