ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —. Flange connectors, ports and mounting surfaces for use at a pressure ofMPa (bar), DNto DN WARNING — Users of this document should ensure that suitable material is chosen for the port to maintain ISO (E) Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws —. PartFlange connectors for use at pressures ofMPa (bar) toMPa (bar), DNto DNWARNING — Users of this part of ISO shall ensure that suitable material is chosen for the port to ISO consists of the following parts, under the general title Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws: PartFlange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (bar) toMPa (bar), DNto DN), DNto DN INTERNATIONAL STANDARD. This part of ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and INTERNATIONAL STANDARD. ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —MPa (bar), DNto DNWARNING — Users of this document should ensure that suitable material is chosen for the port to maintain the required working pres ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure ofMPa (bar[1]) This document also recognizes the need to accommodate metric screw ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —. Flange This part of ISO specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.
ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —. Flange connectors, ports and mounting surfaces for use at a pressure ofMPa (bar), DNto DN WARNING — Users of this document should ensure that suitable material is chosen for the port to maintain ISO (E) Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws —. PartFlange connectors for use at pressures ofMPa (bar) toMPa (bar), DNto DNWARNING — Users of this part of ISO shall ensure that suitable material is chosen for the port to ISO consists of the following parts, under the general title Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws: PartFlange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (bar) toMPa (bar), DNto DN), DNto DN INTERNATIONAL STANDARD. This part of ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and INTERNATIONAL STANDARD. ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —MPa (bar), DNto DNWARNING — Users of this document should ensure that suitable material is chosen for the port to maintain the required working pres ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure ofMPa (bar[1]) This document also recognizes the need to accommodate metric screw ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —. Flange This part of ISO specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.
Français
English
Deutsch
Español
Italiano
Português