Where imperial flanges are detailed, the dimensions have been converted to the nearest mm. Industry standard is to make to the slip on length through the hub The following ANSI flange charts & flange tables provide flange dimensions including, flange overall diameters, number of bolts and bolt size for the most common sizes of Flange dimensions Flange dimension guideISO (DIN) PNMPNMPNMPN Where imperial flanges are detailed, the dimensions have been converted to the nearest mm. Weld Neck Flange Threaded Flange Slip On Flange Lap Joint Flange Socket Weld Flange Blind Flange. raised face not included in dimensions T, L and LBolt hole diameter 1/8 in. B2 L. 2Flange thicknesses for copper alloy are from BSCopper alloy flanges are always flat-faced Please Note – All dimensions have been given in millimetres. site: Email: wellgrow@ See bore chart for other wall thicknesses (C) This dimension is commonly associated with “true” lap joints. For measurements in inches, please refer to the Hattersley Flange Tables FLANGE TA LES FLANGES BS ; EN ; SANS AND BS/ TABLES D AND E AS AMENDED Table BS Flanges NP = Nominal Pressure 6,,,,Nominal pressurebar = N/m² Type NP/2 Type NP/3 Type NP/4 Type NP/8 For weld preparation see BS and BS or BS and BS as appropriate Taper on diameter Type NP/2 Type NP/3 Flange dimensions Flange dimension guideISO (DIN) PNMPNMPNMPNMPNMPNMDrilling Compatible with AS/NZS, BS & DIN ANSI B⁄ 8˝ For measurements in inches, please refer to the Hattersley Flange TablesFlange Reference Chart: ANSI, DIN, and JIS Flangesxxxx Sizes NPS 1/2 through /2 are same as Class flanges/4 in. larger than bolt diameter.
Where imperial flanges are detailed, the dimensions have been converted to the nearest mm. Industry standard is to make to the slip on length through the hub The following ANSI flange charts & flange tables provide flange dimensions including, flange overall diameters, number of bolts and bolt size for the most common sizes of Flange dimensions Flange dimension guideISO (DIN) PNMPNMPNMPN Where imperial flanges are detailed, the dimensions have been converted to the nearest mm. Weld Neck Flange Threaded Flange Slip On Flange Lap Joint Flange Socket Weld Flange Blind Flange. raised face not included in dimensions T, L and LBolt hole diameter 1/8 in. B2 L. 2Flange thicknesses for copper alloy are from BSCopper alloy flanges are always flat-faced Please Note – All dimensions have been given in millimetres. site: Email: wellgrow@ See bore chart for other wall thicknesses (C) This dimension is commonly associated with “true” lap joints. For measurements in inches, please refer to the Hattersley Flange Tables FLANGE TA LES FLANGES BS ; EN ; SANS AND BS/ TABLES D AND E AS AMENDED Table BS Flanges NP = Nominal Pressure 6,,,,Nominal pressurebar = N/m² Type NP/2 Type NP/3 Type NP/4 Type NP/8 For weld preparation see BS and BS or BS and BS as appropriate Taper on diameter Type NP/2 Type NP/3 Flange dimensions Flange dimension guideISO (DIN) PNMPNMPNMPNMPNMPNMDrilling Compatible with AS/NZS, BS & DIN ANSI B⁄ 8˝ For measurements in inches, please refer to the Hattersley Flange TablesFlange Reference Chart: ANSI, DIN, and JIS Flangesxxxx Sizes NPS 1/2 through /2 are same as Class flanges/4 in. larger than bolt diameter.
Difficulté
Very easy Très facile
Durée
339 day(s) jour(s)
Catégories
Électronique, Énergie, Mobilier, Machines & Outils, Sport & Extérieur
Français
English
Deutsch
Español
Italiano
Português