Spaceship Astrokick : Différence entre versions

m (Master HES-SO Innokick a déplacé la page Soucuppe volante vers Spaceship)
Ligne 13 : Ligne 13 :
 
|Introduction=<translate>Material
 
|Introduction=<translate>Material
  
1x aluminium tube 20mmx1m
+
1 x aluminium tube 19 mm x 2 mm x 1 meter
  
1x universal cord
+
1 x universal cord
  
1x Lego mini-figure
+
1 x Lego mini-figure
  
4x screws
+
4 x screws (standard wood screws)
  
  
Ligne 31 : Ligne 31 :
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Printing the spaceship</translate>
 
|Step_Title=<translate>Printing the spaceship</translate>
|Step_Content=<translate>Print the several parts of the spaceship. This is going to take several hours per part.  
+
|Step_Content=<translate>3D-Print the several parts of the spaceship. This is going to take several hours per part.  
  
 
<br />
 
<br />
  
* Top part: 10h
+
*Top part: 10h
* Bottom part: 10h
+
*Bottom part: 10h
* Dome part: 1h</translate>
+
*Dome part: 1h</translate>
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Cut the aluminum</translate>
 
|Step_Title=<translate>Cut the aluminum</translate>
|Step_Content=<translate>While waiting for the spaceship to be printed cut the aluminum bar in 5 equal parts.  
+
|Step_Content=<translate>While waiting for the spaceship parts to be printed, cut the aluminum bar into 5 parts (14 cm each piece).  
  
 
The first part will be used for the spaceship. The other parts will be used for the handles.</translate>
 
The first part will be used for the spaceship. The other parts will be used for the handles.</translate>
Ligne 47 : Ligne 47 :
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Prepare the handles</translate>
 
|Step_Title=<translate>Prepare the handles</translate>
|Step_Content=<translate>Take two of the tubes and cut the cord (1.5m) to create 2 handles. Pass the cord through the tube and make some rigid knots.</translate>
+
|Step_Content=<translate>Take two tubes and cut a piece of the cord (approx 2-3 meters) to create the 2 handles. Pass the cord through the tube and make some rigid knots.</translate>
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Assemble the spaceship</translate>
 
|Step_Title=<translate>Assemble the spaceship</translate>
|Step_Content=<translate>Take the bottom part and put the aluminium bar inside the concave. Then place the top part on the aluminium bar. Turn the spaceship around and screw the 4 screws inside the spaceship in order to join the pieces together.</translate>
+
|Step_Content=<translate>After the 3D printing is complete, take the bottom part and put the aluminium bar inside the concave. Then place the top part over the aluminium bar. Turn the spaceship around and screw the 4 screws inside the body in order to fix the pieces together.</translate>
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=<translate>Finishing up</translate>
 
|Step_Title=<translate>Finishing up</translate>
|Step_Content=<translate>Pass the two cords through the spaceship and create the same knots with the two other tubes for the handles.</translate>
+
|Step_Content=<translate>Pass the two cords through the spaceship and create the same knots with the two other tubes for the handles (similar to stage 3).</translate>
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step

Version du 9 janvier 2020 à 15:16

Auteur avatarHES-SO | Dernière modification 3/02/2020 par Master HES-SO Innokick

Pas encore d'image

Spaceship game for kids

Introduction

Material

1 x aluminium tube 19 mm x 2 mm x 1 meter

1 x universal cord

1 x Lego mini-figure

4 x screws (standard wood screws)


Machines and tools:

3D printer to print the spaceship

Metal saw to cut the aluminium tube

Matériaux

Outils

Étape 1 - Printing the spaceship

3D-Print the several parts of the spaceship. This is going to take several hours per part.


  • Top part: 10h
  • Bottom part: 10h
  • Dome part: 1h

Étape 2 - Cut the aluminum

While waiting for the spaceship parts to be printed, cut the aluminum bar into 5 parts (14 cm each piece).

The first part will be used for the spaceship. The other parts will be used for the handles.

Étape 3 - Prepare the handles

Take two tubes and cut a piece of the cord (approx 2-3 meters) to create the 2 handles. Pass the cord through the tube and make some rigid knots.

Étape 4 - Assemble the spaceship

After the 3D printing is complete, take the bottom part and put the aluminium bar inside the concave. Then place the top part over the aluminium bar. Turn the spaceship around and screw the 4 screws inside the body in order to fix the pieces together.

Étape 5 - Finishing up

Pass the two cords through the spaceship and create the same knots with the two other tubes for the handles (similar to stage 3).

Étape 6 - Play!

Two people take the handles and start making the spaceship move from one person to the other as shown in the video. Make sure the cords are crossed so the spaceship can move properly.

Commentaires

Draft