Voir la source de Create a wooden pet that connects with Facebook/en

{{ {{tntn|Tuto Details}}
|Main_Picture=Create_a_wooden_pet_that_connects_with_Facebook_italiano.PNG
|Licences=Attribution (CC BY)
|Description=Wooden pet that post a message on your own Facebook timeline.
|Area=Electronics, Machines and Tools, Play and Hobbies, Robotics
|Type=Creation
|Difficulty=Medium
|Duration=50
|Duration-type=minute(s)
|Cost=25
|Currency=EUR (€)
|Tags=Internetofthings, adafruit.io, ESP32, Facebook, Arduino
|SourceLanguage=none
|Language=en
|IsTranslation=1
}}
{{ {{tntn|Introduction}}
|Introduction=In this tutorial we will create a wooden pet that connects with Facebook. It will post a message of your choice on your own timeline whenever its tail is touched.
}}
{{ {{tntn|Materials}}
|Material=* 1 x ESP32 board with power cable
* 4 x jumper wires 
* 1 x breadboard
* 1 x Led
* 1 x 250 kohm resistor (or similar)
|Tools=* 1 Pc with Arduino IDE installed
|ExternalAttachmentsLinks={{ {{tntn|ExternalAttachmentsLinks}}
|ExternalAttachmentsLinks=https://drive.google.com/file/d/1AHXk4zxDN0U7YNiMKVyBzvakh8pY8MH9/view?usp=sharing
}}
}}
{{ {{tntn|Separator}}}}
{{ {{tntn|Tuto Step}}
|Step_Title=Set up an account on adafruit.io
|Step_Content=Once you ve set up an account on adafruit.io, go on creating a new Feed.

Create a new feed and name it, for example, “touchsensor”.
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_1.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_2.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Install arduino IDE
|Step_Content=Download [https://www.arduino.cc/en/Main/Software arduino.cc/en/Main/Software]
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_Arduino_Software.png
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Prepare the ESP32 board on your computer
|Step_Content=Follow the [https://github.com/espressif/arduino-esp32/blob/master/README.md#installation-instructions instructions provided on github] for your OS

[https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/windows.md For windows]

If you have troubles following the instructions for windows, you may find some help below.

To find the Sketch directory, click File > Preferences, on arduino IDE.

The process of cloning existing repository may take a tomatically.

{{Warning|Do not quit until it's done.
Do not shut any pop up window until they shut automatically.}}
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_3.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Check that the board is correctly configured
|Step_Content=
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_5.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_4.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Wiring the led and the touch sensor to the ESP32
|Step_Content=
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_6.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Place the electronic inside the pet
|Step_Content=
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_7.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_8.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Programming on tuniot
|Step_Content=
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_10.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_9.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Install Adafruit_MQTT.h and Adafruit_MQTT_Client.h libraries on Arduino IDE
|Step_Content=Sketch > Include Library > Manage Libraries…
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_11.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Programming on arduino IDE
|Step_Content=To upload the code on Arduino IDE, click on the “copy arduino code into clipboard” button.

Then paste the code onto Arduino IDE, and upload it to the ESP32.

if you click on Serial Monitor (top right of the Arduino IDE screen), you should see the value recorded by the touch sensor (see image below).

It means that your ESP32 is connected to the internet, and that it’s sending the value recorded by the internal touch sensor on-line, on adafruit.io
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_12.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_13.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Create an applet on IFTTT
|Step_Content=Click on My Applets.

Choose New Applet.

Click on THIS (see image below).

Search for Adafruit.

Choose Monitor a feed on Adafruit IO.

Configure it as follows (see image below)

And Click on Create trigger.
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_17.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_16.PNG
|Step_Picture_02=Create_a_wooden_pet_that_connects_with_Facebook_15.PNG
|Step_Picture_03=Create_a_wooden_pet_that_connects_with_Facebook_14.PNG
|Step_Picture_04=Create_a_wooden_pet_that_connects_with_Facebook_19.PNG
|Step_Picture_05=Create_a_wooden_pet_that_connects_with_Facebook_18.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Complete the applet on IFTTT
|Step_Content=Click on THAT

Choose Facebook.

Choose Create a status message.

Type your message and click on Create action.
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_20.PNG
|Step_Picture_01=Create_a_wooden_pet_that_connects_with_Facebook_23.PNG
|Step_Picture_02=Create_a_wooden_pet_that_connects_with_Facebook_22.PNG
|Step_Picture_03=Create_a_wooden_pet_that_connects_with_Facebook_21.PNG
}}
{{ {{tntn|Tuto Step}}
|Step_Title=Final
|Step_Content=In this case, the message that will be posted on your Facebook timeline is “Don’t touch my tail!”
|Step_Picture_00=Create_a_wooden_pet_that_connects_with_Facebook_24.PNG
}}
{{ {{tntn|Notes}}
|Notes=This tutorial has been developed as part of the [http://www.digijeunes.com/projets/itech/ I TECH] project, co-financed by the Erasmus + program of the European Commission. For more info contact us on info@digijeunes.com.
}}
{{ {{tntn|Tuto Status}}
|Complete=Published
}}