Energy module for People Pedal Power

Here you can find the Open Hardware documentation of the People Pedal Power, the system that makes energy out of bikes.

There are 3 chapters,

   The bike stand
   The electric conversion
   The energy moitoring

To find out more about the Vélo M² project and other project, visit www.velom2.be.

Difficulté

Hard Difficile

Durée

2 month(s) mois

Catégories

Électronique

Coût

2000 EUR (€)

energy Energy_module_for_People_Pedal_Power_20171111_154429.jpg fr none Technique 0

Introduction

First the overview of the system. In words, we are harvesting the energy from statinary bikes. The energy is converted to regular AC power. We also monitor the energy flow wit the Open Energy Monitoring system. The bike stands we designed fit regular bikes. The bike wheel drives an electric motor with converts the mecanical energy into electric energy. The DC power is conducted through a diode and through a current sensor. Then the different cables are connected to the supercapacitor. This is the common point. From the supercapacitor we draw the power for the solar inverter that converts the fluctuating DC power to regular AC power. We monitor the power befor the common point. An Arduino takes in the values of the current and voltage and transfers it to a Raspberry Pi that logs the data. An app on the smartphone allows to visualse the data.

• Outils & Matériaux

Matériaux

Outils

Étape 1 -

Draft