Original Prusa i3 MK3S kit assembly

MK3S

Difficulté

Very easy Très facile

Durée

10 minute(s) minute(s)

Catégories

Électronique

Coût

0 USD ($)

Original_Prusa_i3_MK3S_kit_assembly_header-image.jpg Technique

Matériaux

Outils

https://help.prusa3d.com/en/guide/1-introduction_24976#24984

Montaje_3DSteel_V2_-_Tutorial_4_-_Puesta_a_Punto_capa-fan-off.jpg

Étape 1 - All the required tools are included

• The kit includes
• Needle-nose pliers (1x)
• Philips screwdriver (1x)
• Allen key (6x)
• The printer's package contains a lubricant, which is intended for maintenance. No need to use it now the bearings are lubricated. There is a dedicated online manual on how to clean the printer and apply the lubricant. See help.prusa3d.com/maintenance-tips

No soldering is required.

No wire crimping is required.

Étape 2 - Labels guide

• All the boxes and bags including parts for the build are labelled.
• Number (or numbers) in the header tells you for which chapter you'll need that bag (or box).

Étape 3 - Use labels for reference

Most of the labels are scaled 1:1 and can be used to identify the part :-)

• For the most common screws, nuts and PTFE tubes. You can also use the enclosed letter, which contains Prusa Cheatsheet on the other side.

You can help.prusa3d.com/cheatsheet from our site. Print it at 100 %, don't rescale it, otherwise, it won't work.

en none 0 Draft