Voir la source de Plastic Extrusion Machine

{{ {{tntn|Tuto Details}}
|SourceLanguage=en
|Language=en
|IsTranslation=0
|Type=Creation
|Area=Robotics, Energy, Science and Biology
|Description=<translate>Extrusion is a continuous process where plastic flakes are inserted in the hopper and extruded into a line of plastic. These lines can be used to make new raw material (3d printing filament), granulate, spinned around a mold or up to you to find new creative ways.</translate>
|Difficulty=Hard
|Cost=192
|Currency=EUR (€)
|Duration=5
|Duration-type=day(s)
|Licences=Attribution (CC BY)
|Main_Picture=Machine-extrusion.jpg
}}
{{ {{tntn|Introduction}}
|Introduction=<translate>The extrusion machine has quite a specific output, a line. This is well suited to make new granulate and 3D printer filament. However use your creativity and you will find other applications for it as well. Change the nozzle for different shapes and sizes, turn it around a mold to make lamps or a handle for a knife.

The extrusion machine consists in 6 different elements: the hopper, the barrel, the nozzle, the barrel holder, the framework and the electronics.</translate>
}}
{{ {{tntn|Materials}}
|Material=<translate>* Metal sheet plates
* Metal tubes</translate>
|Tools=* Angle grinder
* Protective glasses
* Milling machine
* Arc welding machine
|ExternalAttachmentsLinks={{ExternalAttachmentsLinks
|ExternalAttachmentsLinks=http://preciousplastic.com/videos/download/
}}
|Tuto_Attachments=
}}
{{Separator}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Hopper: cutting metal plates</translate>
|Step_Content=<translate>Get the metal sheet plates. Take measurements following the blue prints and cut the sheets with a grinding machine and sand metal edges.</translate>
|Step_Picture_00=PPla 1 Hooper 01a.jpg
|Step_Picture_01=PPla 1 Hooper 01b.jpg
|Step_Picture_02=PPla 1 Hooper 01c.jpg
|Step_Picture_03=PPla 1 Hooper 01d.jpg
|Step_Picture_04=PPla 1 Hooper 01e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Hopper: drilling metal plates</translate>
|Step_Content=<translate>Prick the plate with a hammer and drill the metal plates on the milling machine</translate>
|Step_Picture_00=PPla 1 Hooper 02a.jpg
|Step_Picture_01=PPla 1 Hooper 02b.jpg
|Step_Picture_02=PPla 1 Hooper 02c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Hopper: welding metal plates</translate>
|Step_Content=<translate>Make a pyramid with the plates and weld them together</translate>
|Step_Picture_00=PPla 1 Hooper 03a.jpg
|Step_Picture_01=PPla 1 Hooper 03b.jpg
|Step_Picture_02=PPla 1 Hooper 03c.jpg
|Step_Picture_03=PPla 1 Hooper 03d.jpg
|Step_Picture_04=PPla 1 Hooper 03e.jpg
|Step_Picture_05=PPla 1 Hooper 03f.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Hopper finishes</translate>
|Step_Picture_00=PPla 1 Hooper 04a.jpg
|Step_Picture_01=PPla 1 Hooper 04b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Barrel</translate>
|Step_Picture_00=PPla 1 Barrel 01a.jpg
|Step_Picture_01=PPla 1 Barrel 01b.jpg
|Step_Picture_02=PPla 1 Barrel 01c.jpg
|Step_Picture_03=PPla 1 Barrel 01d.jpg
|Step_Picture_04=PPla 1 Barrel 01e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Barrel</translate>
|Step_Picture_00=PPla 1 Barrel 02.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PPla 1 Barrel 03a.jpg
|Step_Picture_01=PPla 1 Barrel 03b.jpg
|Step_Picture_02=PPla 1 Barrel 03c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PPla 1 Barrel 04a.jpg
|Step_Picture_01=PPla 1 Barrel 04b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PPla 1 Barrel 05a.jpg
|Step_Picture_01=PPla 1 Barrel 05b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PPla 1 Barrel 06a.jpg
|Step_Picture_01=PPla 1 Barrel 06b.jpg
|Step_Picture_02=PPla 1 Barrel 06c.jpg
|Step_Picture_03=PPla 1 Barrel 06d.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PPla 1 Barrel 07a.jpg
|Step_Picture_01=PPla 1 Barrel 07b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Nozzle</translate>
|Step_Picture_00=PP nozzle 01a.jpg
|Step_Picture_01=PP nozzle 01b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP nozzle 02a.jpg
|Step_Picture_01=PP nozzle 02b.jpg
|Step_Picture_02=PP nozzle 02c.jpg
|Step_Picture_03=PP nozzle 02d.jpg
|Step_Picture_04=PP nozzle 02e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP nozzle 04a.jpg
|Step_Picture_01=PP nozzle 04b.jpg
|Step_Picture_02=PP nozzle 04c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP nozzle 05a.jpg
|Step_Picture_01=PP nozzle 05b.jpg
|Step_Picture_02=PP nozzle 05c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP nozzle 06a.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP nozzle 07a.jpg
|Step_Picture_01=PP nozzle 07b.jpg
|Step_Picture_02=PP nozzle 07c.jpg
|Step_Picture_03=PP nozzle 07d.jpg
|Step_Picture_04=PP nozzle 07e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Barrel holder</translate>
|Step_Picture_00=PP barrel holderZ 01a.jpg
|Step_Picture_01=PP barrel holderZ 01b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP barrel holderZ 02a.jpg
|Step_Picture_01=PP barrel holderZ 02b.jpg
|Step_Picture_02=PP barrel holderZ 02c.jpg
|Step_Picture_03=PP barrel holderZ 02d.jpg
|Step_Picture_04=PP barrel holderZ 02e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP barrel holderZ 03.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP barrel holderZ 04a.jpg
|Step_Picture_01=PP barrel holderZ 04b.jpg
|Step_Picture_02=PP barrel holderZ 04c.jpg
|Step_Picture_03=PP barrel holderZ 04d.jpg
|Step_Picture_04=PP barrel holderZ 04e.jpg
|Step_Picture_05=PP barrel holderZ 04f.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP barrel holder 05a.gif
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Framework</translate>
|Step_Picture_00=PP framework 01a.jpg
|Step_Picture_01=PP framework 01b.jpg
|Step_Picture_02=PP framework 01c.jpg
|Step_Picture_03=PP framework 01d.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP framework 02a.jpg
|Step_Picture_01=PP framework 02b.jpg
|Step_Picture_02=PP framework 02c.jpg
|Step_Picture_03=PP framework 02d.jpg
|Step_Picture_04=PP framework 02e.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP framework 03.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP framework 04a.jpg
|Step_Picture_01=PP framework 04b.jpg
|Step_Picture_02=PP framework 04c.jpg
|Step_Picture_03=PP framework 04d.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecBox 01a.jpg
|Step_Picture_01=PP ElecBox 01b.jpg
|Step_Picture_02=PP ElecBox 01c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecBox 02a.jpg
|Step_Picture_01=PP ElecBox 02b.jpg
|Step_Picture_02=PP ElecBox 02c.jpg
|Step_Picture_03=PP ElecBox 02d.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecBox 03a.jpg
|Step_Picture_01=PP ElecBox 03b.jpg
|Step_Picture_02=PP ElecBox 03c.jpg
|Step_Picture_03=PP ElecBox 03d.jpg
|Step_Picture_04=PP ElecBox 03e.jpg
|Step_Picture_05=PP ElecBox 03f.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecBox 04a.jpg
|Step_Picture_01=PP ElecBox 04b.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecConnect 01a.jpg
|Step_Picture_01=PP ElecConnect 01b.jpg
|Step_Picture_02=PP ElecConnect 01d.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecConnect 02b.jpg
|Step_Picture_01=PP ElecConnect 02c.jpg
|Step_Picture_02=PP ElecConnect 02d.jpg
|Step_Picture_03=PP ElecConnect 02e.jpg
|Step_Picture_04=PP ElecConnect 02f.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Attach it to the frame</translate>
|Step_Picture_00=PP ElecConnect 03a.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecConnect 04a.jpg
|Step_Picture_01=PP ElecConnect 04b.jpg
|Step_Picture_02=PP ElecConnect 04c.jpg
|Step_Picture_03=PP ElecConnect 04d.jpg
|Step_Picture_04=PP ElecConnect 04e.jpg
|Step_Picture_05=PP ElecConnect 04f.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Picture_00=PP ElecConnect 05a.jpg
|Step_Picture_01=PP ElecConnect 05b.jpg
|Step_Picture_02=PP ElecConnect 05c.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Engine</translate>
|Step_Picture_00=PP Engine.gif
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Improvements and learn</translate>
|Step_Content=<translate>'''Suggestion:''' Currently, the nose decided the amount of plastic that comes out.

However, a better way to do this is by adding a controllable engine. There are different ways to control the speed of an engine by using different controllers or regulators.

'''How to use the machine'''

[https://www.youtube.com/watch?v=p4NoY33-Tfo&t=15m9s Clic here] to watch our online video (starting from 15:09) to learn how to use the machine.

Thanks!</translate>
|Step_Picture_00=Machine-extrusion.jpg
|Step_Picture_01=PP Final 01.gif
|Step_Picture_02=PP Final 02.gif
}}
{{ {{tntn|Notes}}|}}
{{Tuto_Status
|Complete=Yes
}}