Voir la source de PP Extruder Pro

{{Tuto Details
|Main_Picture=PP_Extruder_Pro_PXL_20211203_182039160.jpg
|Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":-179,"top":-26,"width":4032,"height":2268,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.21,"scaleY":0.21,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wikifab.org/images/8/8a/PP_Extruder_Pro_PXL_20211203_182039160.jpg","filters":[]}],"height":450.76660988074957,"width":600}
|Description=<translate>This tutorial documents the build process for the Precious Plastic Extruder Pro as supplied by Citizen Scientific Workshop out of Idaho, United States.</translate>
|Area=Machines and Tools, Recycling and Upcycling
|Type=Creation
|Difficulty=Medium
|Duration=2
|Duration-type=day(s)
|Cost=3000
|Currency=USD ($)
}}
{{Introduction
|Introduction=<translate></translate>
}}
{{Materials}}
{{Tuto Step
|Step_Title=<translate>Table Build-Top deck 1</translate>
|Step_Content=<translate>==== Tools ====
1/2" Socket

==== Parts ====
2x 1000mm 4080 extrusion

4x 300mm 4040 extrusion

40x t-nuts

22x M8x20 bolts

22x M8 Washers

12x Corner Brackets
<br />

==== Steps ====

# Slide 6 t nuts into the top side of the 1000mm extrusion. (repeat for other beam) 
# For the 300mm beams, 2 pairs of 2 will be identical, one "I" shaped, and one "C" shaped. 
# For the C-shaped beam, Slide two t-nuts into one rail. Attach the corner brackets at the ends, ensuring the bracket is flush with the beams end.   *Always use the side of the bracket with a flat face (non-lipped) first. This ensures you can get a tool onto the 2nd bolt without being blocked. 
# For the I-Beams, repeat the same steps for the C-beam, but on both sides. 
# Repeat so you have 2 I-beams and 2-C beams. 
# *Optional* Add bolts to all remaining bracket holes and loosely attach t-nuts. (as seen in the right two beams in image 3)</translate>
|Step_Picture_00=PP_Extruder_Pro_PXL_20211130_224743150.jpg
|Step_Picture_01=PP_Extruder_Pro_PXL_20211130_224830624.jpg
|Step_Picture_02=PP_Extruder_Pro_PXL_20211130_225313339.jpg
|Step_Picture_03=PP_Extruder_Pro_PXL_20211130_230128590.jpg
|Step_Picture_04=PP_Extruder_Pro_PXL_20211130_230404467.jpg
}}
{{Tuto Step
|Step_Title=<translate>Table Build- Top deck 2</translate>
|Step_Content=<translate>====Tools====
1/2" Socket Wrench

====Parts====
Assemblies from previous step

====Steps====

#If you have already attached the bolts/and t-nuts from the optional step - Slide beams into the upper channel (as seen in image 1)  Otherwise, thread the nuts into the channel and attach LOOSELY with bolts.
#Repeat for the bottom rail.
#Secure the C beams in place with the socket wrench, but leave the I-beams LOOSE as they will need to be shifted later.</translate>
|Step_Picture_00=PP_Extruder_Pro_PXL_20211130_231819971.jpg
|Step_Picture_01=PP_Extruder_Pro_PXL_20211130_232222096.jpg
}}
{{Tuto Step
|Step_Title=<translate>Table Build- Top deck 3</translate>
|Step_Content=<translate>==== Tools ====
1/2" Socket Wrench

==== Parts ====
Assembly from previous step

4x Steel Corner Brackets

32x M8x20 Bolts

32x M8 washers

32x t-nuts

==== Steps ====

# On the exterior corner of the 4080 extrusion, slide 3 t-nuts into each top/bottom rail. 
# Secure corner plate to rale with accompanying 6 bolt/washer combos.
# Add 2 additional  bolt/washer/t-nut combos to the 2 remaining vertical holes. Keep these very loose as we'll slide them into another assembly later. 
# Repeat on all corners.</translate>
|Step_Picture_00=PP_Extruder_Pro_PXL_20211130_232516950.jpg
|Step_Picture_01=PP_Extruder_Pro_PXL_20211130_232613669.jpg
|Step_Picture_02=PP_Extruder_Pro_PXL_20211130_233648372.jpg
}}
{{Tuto Step
|Step_Title=<translate>Table Build - Side Legs 1</translate>
|Step_Content=<translate>====Tools====
1/2" Socket Wrench

====Parts====
4x 800mm 4040 Aluminum extrusion

2x 300mm 4040 Aluminum extrusion

4x corner Brackets

8x M8x20 Bolts

8x M8 washers

8x t-nuts

====Steps====

#Slot 2 t-nuts into one rail of the 300mm extrusion
#Secure corner brackets on the rail, ensuring that the ends are flush with the beam.
#Slide a t-nut into a rail on the 800mm extrusion about 12in from the end.
#Secure one side of the short beam to the long beam.
#Repeat on the other side.
#Repeat steps 1-5 so you have 2 "H" assemblies.</translate>
|Step_Picture_00=PP_Extruder_Pro_PXL_20211130_234025463.jpg
|Step_Picture_01=PP_Extruder_Pro_PXL_20211130_234120995.jpg
|Step_Picture_02=PP_Extruder_Pro_PXL_20211130_234238043.jpg
|Step_Picture_03=PP_Extruder_Pro_PXL_20211130_234307027.jpg
|Step_Picture_04=PP_Extruder_Pro_PXL_20211130_234437395.jpg
}}
{{Tuto Step
|Step_Title=<translate>Table Build - Side Legs 2</translate>
|Step_Content=<translate>====Tools====
1/2" Socket Wrench
====Parts====
2 "H" Assemblies from previous step

Top deck Assembly

==== Steps ====

# Shift the top deck assembly off your worksurface so that 2 corners are free hanging in space. 
# Position an H assembly underneath the corners, aligning the pre-attached t-nuts to the external rail slots. This requires you to adjust the t-nuts so they are perfectly vertical. 
# Once in place, tighten down the bolts
# Repeat on the other side.</translate>
|Step_Picture_00=PP_Extruder_Pro_PXL_20211130_234615364.jpg
|Step_Picture_01=PP_Extruder_Pro_PXL_20211130_234624196.jpg
|Step_Picture_02=PP_Extruder_Pro_PXL_20211130_235219618.jpg
}}
{{Notes
|Notes=<translate></translate>
}}
{{PageLang
|Language=en
|SourceLanguage=none
|IsTranslation=0
}}
{{Tuto Status
|Complete=Draft
}}