Modifier Tutorial : EMI probe 9-11

Oups ! Vous n'avez pas la permission de modifier ce tutoriel car vous n'êtes pas connecté. Pour modifier ce tutoriel, créez un compte ou connectez-vous.
Oups, vous n’avez pas la permission de modifier les « Page ».

Introduction (facultatif)

Outils & Matériaux

Tutoriels prérequis

Fichiers

Matériaux

Outils

Étapes

Étape 1

<translate>Whether you re using an arduino uno or a nano, the code that you ll need to upload in order for the probe to function correctly is basically the same.

Just make sure to program the correct digital pin for the piezo speaker. In the instructions above, we connected the speaker on D9 on an arduino uno, and D3 on an arduino nano.

// Arduino Electromagnetic interference detector

// Code modified by Patrick Di Justo, based on

// Aaron ALAI EMF Detector April 22nd 2009 VERSION 1.0

// aaronalai1@gmail.com

//

// This outputs sound and numeric data to the 4char

<nowiki>#</nowiki>include <SoftwareSerial.h>

<nowiki>#</nowiki>define SerialIn 2

<nowiki>#</nowiki>define SerialOut 7

<nowiki>#</nowiki>define wDelay 900

int inPin = 5;

int val = 0;

SoftwareSerial mySerialPort(SerialIn, SerialOut);

void setup()

{

pinMode(SerialOut, OUTPUT);

pinMode(SerialIn, INPUT);

mySerialPort.begin(19200);

mySerialPort.print("vv");

mySerialPort.print("xxxx");

delay(wDelay);

mySerialPort.print("----");

delay(wDelay);

mySerialPort.print("8888");

delay(wDelay);

mySerialPort.print("xxxx");

delay(wDelay);

Serial.begin(9600);

}

void loop()

{

val = analogRead(inPin);

Serial.println(val);

dispData(val);

val = map(val, 1, 100, 1, 2048);

tone(9,val,10);

}

void dispData(int i)

{

if ((i<-999)

Étape 2

You can use the EMI probe to compare and contrast EMI radiations deriving from different electronic appliances.

Hold the probe next to a stereo system or a TV whilst these devices are in standby mode, and you ll probably get a similar reading to a laptop when this is turned on.

Once you ve found out which electronic appliances radiate the biggest amount of EMI when in standby mode, you can learn to plug these off to save energy.

Modifier Tutorial : EMI probe 9-11

Étapes

Notes et références

QR code pour votre plateforme Dokit

QR code pour la Webapp Dokit