Difference between revisions of "SunZilla - Setup manual"

(set pageLanguageSource property)
Line 1: Line 1:
 
{{ {{tntn|Tuto Details}}
 
{{ {{tntn|Tuto Details}}
|SourceLanguage=none
+
|Main_Picture=Sunzilla_Assembly_03.png
|Language=en
+
|Licences=CERN Open Hardware Licence v1.2
|IsTranslation=0
+
|Description=<translate>This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL!</translate>
 +
|Area=Energy
 
|Type=Technique
 
|Type=Technique
|Area=Energy
 
|Description=<translate>This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL!</translate>
 
 
|Difficulty=Easy
 
|Difficulty=Easy
 +
|Duration=20
 +
|Duration-type=minute(s)
 
|Cost=0
 
|Cost=0
 
|Currency=EUR (€)
 
|Currency=EUR (€)
|Duration=20
+
|SourceLanguage=none
|Duration-type=minute(s)
+
|Language=en
|Licences=CERN Open Hardware Licence v1.2
+
|IsTranslation=0
|Main_Picture=Sunzilla_Assembly_03.png
 
 
}}
 
}}
 
{{ {{tntn|Introduction}}
 
{{ {{tntn|Introduction}}
Line 20: Line 20:
 
* Effectiv battery storage: 600 Wh</translate>
 
* Effectiv battery storage: 600 Wh</translate>
 
}}
 
}}
{{Separator}}
 
 
{{ {{tntn|Materials}}
 
{{ {{tntn|Materials}}
 +
|Step_Picture_00=Sunzilla_Assembly_01.png
 +
|Step_Picture_01=Sunzilla_Assembly_02.png
 
|Material=<translate>Get the three boxes :
 
|Material=<translate>Get the three boxes :
 
1. The left one (A) is the battery box
 
1. The left one (A) is the battery box
Line 28: Line 29:
  
 
Open the solar module box, and get the solar cells, the cables, the aluminium profiles and the 8 screws outside.</translate>
 
Open the solar module box, and get the solar cells, the cables, the aluminium profiles and the 8 screws outside.</translate>
|Step_Picture_00=Sunzilla_Assembly_01.png
+
|Tools=<translate></translate>
|Step_Picture_01=Sunzilla_Assembly_02.png
 
|Step_Picture_02=No-image-yet.jpg
 
|Step_Picture_03=No-image-yet.jpg
 
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
{{Separator}}
+
{{ {{tntn|Separator}}}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Connect the three boxes</translate>
 
|Step_Title=<translate>Connect the three boxes</translate>
Line 43: Line 39:
 
|Step_Picture_02=Sunzilla_Assembly_07.png
 
|Step_Picture_02=Sunzilla_Assembly_07.png
 
|Step_Picture_03=Sunzilla_Assembly_06.png
 
|Step_Picture_03=Sunzilla_Assembly_06.png
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
Line 52: Line 46:
 
|Step_Picture_01=Sunzilla_Assembly_09.png
 
|Step_Picture_01=Sunzilla_Assembly_09.png
 
|Step_Picture_02=Sunzilla_Assembly_10.png
 
|Step_Picture_02=Sunzilla_Assembly_10.png
|Step_Picture_03=No-image-yet.jpg
 
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
Line 61: Line 52:
 
|Step_Picture_00=Sunzilla_Assembly_11.png
 
|Step_Picture_00=Sunzilla_Assembly_11.png
 
|Step_Picture_01=Sunzilla_Assembly_12.png
 
|Step_Picture_01=Sunzilla_Assembly_12.png
|Step_Picture_02=No-image-yet.jpg
 
|Step_Picture_03=No-image-yet.jpg
 
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Pull down the elastic bands</translate>
 
|Step_Title=<translate>Pull down the elastic bands</translate>
 +
|Step_Content=<translate></translate>
 
|Step_Picture_00=Sunzilla_Assembly_13.png
 
|Step_Picture_00=Sunzilla_Assembly_13.png
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_02=No-image-yet.jpg
 
|Step_Picture_03=No-image-yet.jpg
 
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 +
|Step_Title=<translate></translate>
 
|Step_Content=<translate>Take the solar cells. Unfold them and shift the aluminium edges at all four sides</translate>
 
|Step_Content=<translate>Take the solar cells. Unfold them and shift the aluminium edges at all four sides</translate>
 
|Step_Picture_00=Sunzilla_Assembly_14.png
 
|Step_Picture_00=Sunzilla_Assembly_14.png
Line 82: Line 66:
 
|Step_Picture_03=Sunzilla_Assembly_17.png
 
|Step_Picture_03=Sunzilla_Assembly_17.png
 
|Step_Picture_04=Sunzilla_Assembly_18.png
 
|Step_Picture_04=Sunzilla_Assembly_18.png
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 +
|Step_Title=<translate></translate>
 
|Step_Content=<translate>Take the upper part of the solar module and connect the whole solar module with the upper aluminium profile. Be sure that the solar module is on the left side of the aluminium profile. Connect also the lower part.</translate>
 
|Step_Content=<translate>Take the upper part of the solar module and connect the whole solar module with the upper aluminium profile. Be sure that the solar module is on the left side of the aluminium profile. Connect also the lower part.</translate>
 
|Step_Picture_00=Sunzilla_Assembly_19.png
 
|Step_Picture_00=Sunzilla_Assembly_19.png
Line 90: Line 74:
 
|Step_Picture_02=Sunzilla_Assembly_21.png
 
|Step_Picture_02=Sunzilla_Assembly_21.png
 
|Step_Picture_03=Sunzilla_Assembly_22.png
 
|Step_Picture_03=Sunzilla_Assembly_22.png
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 +
|Step_Title=<translate></translate>
 
|Step_Content=<translate>Connect the cables from the solar cells to the solar module box.</translate>
 
|Step_Content=<translate>Connect the cables from the solar cells to the solar module box.</translate>
 
|Step_Picture_00=Sunzilla_Assembly_23.png
 
|Step_Picture_00=Sunzilla_Assembly_23.png
 
|Step_Picture_01=Sunzilla_Assembly_24.png
 
|Step_Picture_01=Sunzilla_Assembly_24.png
|Step_Picture_02=No-image-yet.jpg
 
|Step_Picture_03=No-image-yet.jpg
 
|Step_Picture_04=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
Line 124: Line 103:
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Plug in consumer</translate>
 
|Step_Title=<translate>Plug in consumer</translate>
 +
|Step_Content=<translate></translate>
 
|Step_Picture_00=Sunzilla_Assembly_27.png
 
|Step_Picture_00=Sunzilla_Assembly_27.png
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
Line 133: Line 113:
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Dismanteling</translate>
 
|Step_Title=<translate>Dismanteling</translate>
|Step_Content={{Warning|IMPORTANT!! DANGER!! READ DISMANTLING MANUAL!!}}
+
|Step_Content=<translate>{{Warning|IMPORTANT!! DANGER!! READ DISMANTLING MANUAL!!}}
  
At Dismanteling, you MUST follow the right order of these steps, otherwise you could be hurt.
+
At Dismanteling, you MUST follow the right order of these steps, otherwise you could be hurt.</translate>
 
|Step_Picture_00=No-image-yet.jpg
 
|Step_Picture_00=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
Line 165: Line 145:
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Disconnect Solar-Connectors</translate>
 
|Step_Title=<translate>Disconnect Solar-Connectors</translate>
 +
|Step_Content=<translate></translate>
 
|Step_Picture_00=Sunzilla_Assembly_30.png
 
|Step_Picture_00=Sunzilla_Assembly_30.png
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
Line 174: Line 155:
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Switch off Battery box</translate>
 
|Step_Title=<translate>Switch off Battery box</translate>
 +
|Step_Content=<translate></translate>
 
|Step_Picture_00=Sunzilla_Assembly_31.png
 
|Step_Picture_00=Sunzilla_Assembly_31.png
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
Line 183: Line 165:
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 
|Step_Title=<translate>Unplug / detach orange cables</translate>
 
|Step_Title=<translate>Unplug / detach orange cables</translate>
 +
|Step_Content=<translate></translate>
 
|Step_Picture_00=18.jpg
 
|Step_Picture_00=18.jpg
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
Line 203: Line 186:
 
|Step_Picture_05=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
}}
 
}}
{{ {{tntn|Notes}}|}}
+
{{ {{tntn|Notes}}
 +
|Notes=<translate></translate>
 +
}}
 +
{{ {{tntn|Tuto Status}}
 +
|Complete=Published
 +
}}
 +
{{Separator}}

Revision as of 16:11, 27 June 2018

Author avatarSunZilla | Last edit 9/12/2019 by Clementflipo

Sunzilla Assembly 03.png
This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL!

Introduction

Technical details:

  • Solar peak Power: 140W
  • Maximum AC-output of pure sinus inverter: 350W (700W peakload)
  • Effectiv battery storage: 600 Wh

Materials

Get the three boxes : 1. The left one (A) is the battery box 2. The mid- dle one (B) the solar box 3. The right one (C) the socket box

Open the solar module box, and get the solar cells, the cables, the aluminium profiles and the 8 screws outside.

Tools

Step 1 - Connect the three boxes

Press the cable inside when both white points match and turn the blue top unit of the cable to lock.

Step 2 - Close the solar module box

Close the solar module box, put the two long aluminium profiles in their holes. Open slightly the box and insert two screws to lock the profiles. Choose the same holes in the middle and be sure to do the same on both sides.


Step 3 - Insert the aluminium profiles

Take the shorter aluminium profiles, insert them as shown on the pic and lock them.


Step 4 - Pull down the elastic bands



Step 5 -

Take the solar cells. Unfold them and shift the aluminium edges at all four sides

Step 6 -

Take the upper part of the solar module and connect the whole solar module with the upper aluminium profile. Be sure that the solar module is on the left side of the aluminium profile. Connect also the lower part.

Step 7 -

Connect the cables from the solar cells to the solar module box.


Step 8 - Switch on battery box

Switch on battery box. Green light should turn on

Step 9 - Switch on socket box

Switch on socket box. Green light should turn on

Step 10 - Plug in consumer

Step 11 - Dismanteling

IMPORTANT!! DANGER!! READ DISMANTLING MANUAL!!

At Dismanteling, you MUST follow the right order of these steps, otherwise you could be hurt.

Step 12 - Switch off Socket Box if switched on

Switch off Socket Box if switched on

Step 13 - Turn Solar Panels out of sun

Turn Solar Panels out of sun and cover at least one Solar-Panel (for exam- ple with Pullover)

Step 14 - Disconnect Solar-Connectors

Step 15 - Switch off Battery box

Step 16 - Unplug / detach orange cables

Step 17 - Switch on Socket box again

Switch on Socket box again until green light is off (to discharge local en- ergy storage), then switch OFF again!

YOU’RE DONE!

Comments

Published