Voir la source de SunZilla - Setup manual

{{ {{tntn|Tuto Details}}
|SourceLanguage=none
|Language=en
|IsTranslation=0
|Type=Technique
|Area=Energy
|Description=<translate>This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL!</translate>
|Difficulty=Easy
|Cost=0
|Currency=EUR (€)
|Duration=20
|Duration-type=minute(s)
|Licences=CERN Open Hardware Licence v1.2
|Main_Picture=Sunzilla_Assembly_03.png
}}
{{ {{tntn|Introduction}}
|Introduction=<translate>'''Technical details:'''
* Solar peak Power: 140W
* Maximum AC-output of pure sinus inverter: 350W (700W peakload)
* Effectiv battery storage: 600 Wh</translate>
}}
{{Separator}}
{{ {{tntn|Materials}}
|Material=<translate>Get the three boxes :
1. The left one (A) is the battery box
2. The mid- dle one (B) the solar box
3. The right one (C) the socket box

Open the solar module box, and get the solar cells, the cables, the aluminium profiles and the 8 screws outside.</translate>
|Step_Picture_00=Sunzilla_Assembly_01.png
|Step_Picture_01=Sunzilla_Assembly_02.png
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{Separator}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Connect the three boxes</translate>
|Step_Content=<translate>Press the cable inside when both white points match and turn the blue top unit of the cable to lock.</translate>
|Step_Picture_00=Sunzilla_Assembly_04.png
|Step_Picture_01=Sunzilla_Assembly_05.png
|Step_Picture_02=Sunzilla_Assembly_07.png
|Step_Picture_03=Sunzilla_Assembly_06.png
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Close the solar module box</translate>
|Step_Content=<translate>Close the solar module box, put the two long aluminium profiles in their holes. Open slightly the box and insert two screws to lock the profiles. Choose the same holes in the middle and be sure to do the same on both sides.</translate>
|Step_Picture_00=Sunzilla_Assembly_08.png
|Step_Picture_01=Sunzilla_Assembly_09.png
|Step_Picture_02=Sunzilla_Assembly_10.png
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Insert the aluminium profiles</translate>
|Step_Content=<translate>Take the shorter aluminium profiles, insert them as shown on the pic and lock them.</translate>
|Step_Picture_00=Sunzilla_Assembly_11.png
|Step_Picture_01=Sunzilla_Assembly_12.png
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Pull down the elastic bands</translate>
|Step_Picture_00=Sunzilla_Assembly_13.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Content=<translate>Take the solar cells. Unfold them and shift the aluminium edges at all four sides</translate>
|Step_Picture_00=Sunzilla_Assembly_14.png
|Step_Picture_01=Sunzilla_Assembly_15.png
|Step_Picture_02=Sunzilla_Assembly_16.png
|Step_Picture_03=Sunzilla_Assembly_17.png
|Step_Picture_04=Sunzilla_Assembly_18.png
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Content=<translate>Take the upper part of the solar module and connect the whole solar module with the upper aluminium profile. Be sure that the solar module is on the left side of the aluminium profile. Connect also the lower part.</translate>
|Step_Picture_00=Sunzilla_Assembly_19.png
|Step_Picture_01=Sunzilla_Assembly_20.png
|Step_Picture_02=Sunzilla_Assembly_21.png
|Step_Picture_03=Sunzilla_Assembly_22.png
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Content=<translate>Connect the cables from the solar cells to the solar module box.</translate>
|Step_Picture_00=Sunzilla_Assembly_23.png
|Step_Picture_01=Sunzilla_Assembly_24.png
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Switch on battery box</translate>
|Step_Content=<translate>Switch on battery box. Green light should turn on</translate>
|Step_Picture_00=Sunzilla_Assembly_25.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Switch on socket box</translate>
|Step_Content=<translate>Switch on socket box. Green light should turn on</translate>
|Step_Picture_00=Sunzilla_Assembly_26.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Plug in consumer</translate>
|Step_Picture_00=Sunzilla_Assembly_27.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Dismanteling</translate>
|Step_Content={{Warning|IMPORTANT!! DANGER!! READ DISMANTLING MANUAL!!}}

At Dismanteling, you MUST follow the right order of these steps, otherwise you could be hurt.
|Step_Picture_00=No-image-yet.jpg
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Switch off Socket Box if switched on</translate>
|Step_Content=<translate>Switch off Socket Box if switched on</translate>
|Step_Picture_00=Sunzilla_Assembly_28.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Turn Solar Panels out of sun</translate>
|Step_Content=<translate>Turn Solar Panels out of sun and cover at least one Solar-Panel (for exam- ple with Pullover)</translate>
|Step_Picture_00=Sunzilla_Assembly_29.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Disconnect Solar-Connectors</translate>
|Step_Picture_00=Sunzilla_Assembly_30.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Switch off Battery box</translate>
|Step_Picture_00=Sunzilla_Assembly_31.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Unplug / detach orange cables</translate>
|Step_Picture_00=18.jpg
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate>Switch on Socket box again</translate>
|Step_Content=<translate>Switch on Socket box again until green light is off (to discharge local en-
ergy storage), then switch OFF again!

YOU’RE DONE!</translate>
|Step_Picture_00=Sunzilla_Assembly_33.png
|Step_Picture_01=No-image-yet.jpg
|Step_Picture_02=No-image-yet.jpg
|Step_Picture_03=No-image-yet.jpg
|Step_Picture_04=No-image-yet.jpg
|Step_Picture_05=No-image-yet.jpg
}}
{{ {{tntn|Notes}}|}}