Difference between revisions of "SolarOSE - Guide 4: Skeleton of the receiver"

(set pageLanguageSource property)
(update property name)
 
Line 1: Line 1:
{{ {{tntn|Tuto Details}}
+
{{Tuto Details
 
|SourceLanguage=none
 
|SourceLanguage=none
 
|Language=en
 
|Language=en
Line 14: Line 14:
 
|Main_Picture=SolarOSE_G4_4_1.jpg
 
|Main_Picture=SolarOSE_G4_4_1.jpg
 
}}
 
}}
{{ {{tntn|Introduction}}|}}
+
{{Introduction|}}
 
{{Separator}}
 
{{Separator}}
{{ {{tntn|Materials}}
+
{{Materials
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_01=No-image-yet.jpg
 
|Step_Picture_02=No-image-yet.jpg
 
|Step_Picture_02=No-image-yet.jpg
Line 24: Line 24:
 
}}
 
}}
 
{{Separator}}
 
{{Separator}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=<translate>Main beam</translate>
 
|Step_Title=<translate>Main beam</translate>
 
|Step_Content=<translate>Cut the 30x30x2300 mm square tube.
 
|Step_Content=<translate>Cut the 30x30x2300 mm square tube.
Line 35: Line 35:
 
|Step_Picture_05=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=<translate>Lateral 'L' profiles</translate>
 
|Step_Title=<translate>Lateral 'L' profiles</translate>
 
|Step_Content=<translate>Cut two L profiles 30x60 mm, thick of 3 mm and long of 2100 mm.
 
|Step_Content=<translate>Cut two L profiles 30x60 mm, thick of 3 mm and long of 2100 mm.
Line 51: Line 51:
 
|Step_Picture_05=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=<translate>Junction of the main beam and the lateral L profiles</translate>
 
|Step_Title=<translate>Junction of the main beam and the lateral L profiles</translate>
 
|Step_Content=<translate>Cut, drill, weld according to the 3D model.</translate>
 
|Step_Content=<translate>Cut, drill, weld according to the 3D model.</translate>
Line 61: Line 61:
 
|Step_Picture_05=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=<translate>Hanger</translate>
 
|Step_Title=<translate>Hanger</translate>
 
|Step_Content=<translate>Print the 10 hangers at the cutting laser. The material used is a wood board (for example laminated structural wood) with a thickness of 10 mm.
 
|Step_Content=<translate>Print the 10 hangers at the cutting laser. The material used is a wood board (for example laminated structural wood) with a thickness of 10 mm.
Line 75: Line 75:
 
|Step_Picture_05=No-image-yet.jpg
 
|Step_Picture_05=No-image-yet.jpg
 
}}
 
}}
{{ {{tntn|Notes}}|}}
+
{{Notes|}}

Latest revision as of 12:57, 9 December 2019

Author avatarOSE France | Last edit 9/12/2019 by Clementflipo

SolarOSE G4 4 1.jpg
This is the second tutorial for building the solar concentrator of Open Source Ecologie (French branch of Open Source Ecology). Here we are going to build the mirror facets.
Difficulty
Medium
Duration
3 hour(s)
Categories
Energy
Cost
100 EUR (€)

Materials

Tools

Step 1 - Main beam

Cut the 30x30x2300 mm square tube. Drill the fixation holes of the tepee. Drill and tap at 5 mm diameter the fixation holes of the junction.

Step 2 - Lateral 'L' profiles

Cut two L profiles 30x60 mm, thick of 3 mm and long of 2100 mm.

Drill and tap the fixation holes of the exterior cover, screw with a diameter 4 mm.

Drill the fixation holes at the junction, as depicted in the 3D model. Improvement: drill 2 holes on the side and none on the bottom of the L.

Weld a flat at each edge of the L (for the fixation on the “tepee”…).

Step 3 - Junction of the main beam and the lateral L profiles

Cut, drill, weld according to the 3D model.

Step 4 - Hanger

Print the 10 hangers at the cutting laser. The material used is a wood board (for example laminated structural wood) with a thickness of 10 mm.

Cut shapes of 2 hangers (with a cutting laser or manually), without emptying them. They are needed for the secondary reflector in order to close the receiver on its edges.

Link to the file for printing!

Comments