Original Prusa i3 MK3S kit assembly

Auteur avatarMga | Dernière modification 11/03/2021 par Abekonge

Original Prusa i3 MK3S kit assembly header-image.jpg
MK3S
Difficulté
Très facile
Durée
10 minute(s)
Catégories
Électronique
Coût
0 USD ($)

Étape 1 - All the required tools are included

  • The kit includes
  • Needle-nose pliers (1x)
  • Philips screwdriver (1x)
  • Allen key (6x)
  • The printer's package contains a lubricant, which is intended for maintenance. No need to use it now the bearings are lubricated. There is a dedicated online manual on how to clean the printer and apply the lubricant. See help.prusa3d.com/maintenance-tips

No soldering is required.

No wire crimping is required.



Étape 2 - Labels guide

  • All the boxes and bags including parts for the build are labelled.
  • Number (or numbers) in the header tells you for which chapter you'll need that bag (or box).




Étape 3 - Use labels for reference

Most of the labels are scaled 1:1 and can be used to identify the part :-)
  • For the most common screws, nuts and PTFE tubes. You can also use the enclosed letter, which contains Prusa Cheatsheet on the other side.
You can help.prusa3d.com/cheatsheet from our site. Print it at 100 %, don't rescale it, otherwise, it won't work.



Commentaires

Draft