Difference between revisions of "Mölkky/fr"

Line 29: Line 29:
 
|Material=Vous avez principalement besoin de bois.
 
|Material=Vous avez principalement besoin de bois.
  
You can buy finished wood, recycle chair legs, or use found wood like driftwood or fallen branches (remember, do not cut or break wood from live trees). Aim for a thickness of around five to eight centimetres (two to three inches), and around two metres (six feet) in total.
+
Vous pouvez acheter des rondin de bois, recycler des pieds de chaises, ou ramasser du bois mort. (ne coupez pas du bois des arbres vivants). Il faut un diamètre d'environ 5 à 8cm, et environ 2 mètre au total.
  
 
The exact dimensions are not crucial, go with what fits your available materials and suits your personal taste (there isn't even a hard reason for your skittles to have a circular cross section, so, go ahead, make them square if you want).
 
The exact dimensions are not crucial, go with what fits your available materials and suits your personal taste (there isn't even a hard reason for your skittles to have a circular cross section, so, go ahead, make them square if you want).

Revision as of 11:39, 14 August 2017

Author avatarAuguste & Claire | Last edit 9/12/2019 by Clementflipo

MOL Step01 01.jpg
Un Mölkky à faire soi-même, le fameux jeux de quilles finlandaises
Difficulty
Easy
Duration
2 hour(s)
Categories
Play & Hobbies
Cost
20 EUR (€)
Other languages:
English • ‎français
License : Attribution (CC BY)

Materials

Vous avez principalement besoin de bois.

Vous pouvez acheter des rondin de bois, recycler des pieds de chaises, ou ramasser du bois mort. (ne coupez pas du bois des arbres vivants). Il faut un diamètre d'environ 5 à 8cm, et environ 2 mètre au total.

The exact dimensions are not crucial, go with what fits your available materials and suits your personal taste (there isn't even a hard reason for your skittles to have a circular cross section, so, go ahead, make them square if you want).

Tools

  • Wood saw (hand or power saw)
  • Sandpaper or a knife for smoothing edges
  • Paint to mark numbers on the skittles

Step 1 - Cutting

You need to cut twelve skittles and one throwing pin, or mölkky (although you may wish to cut two).

The skittles need to be cut with one end at around a 30º angle. If you are cutting all the skittles from a single piece of wood, that means that you need to alternate between 30º and 90º cuts, starting with a 30º cut.

You are aiming for lengths of about 20cm / 8" for both the skittles and the mölkky.

Step 2 -

Step 3 -

Step 4 -

Step 5 -

Step 6 - Marking

The skittles need to be marked with the numbers 1 to 12 on the sloped end.

You can carve the numbers in, paint them on, use permanent markers or any combination you like.

I painted the numbers with a spray paint and stencils.

Step 7 - Play the game

Comments

Yes