In this Documentation I am showing what I was able to find out about the MiBoxer WL5 5 in 1 WiFi RGB+CCT Controller.
Auteur Sarius8e | Dernière modification 14/10/2021 par Sarius8e
Durée
20 minute(s) minute(s)
In this Documentation I am showing what I was able to find out about the MiBoxer WL5 5 in 1 WiFi RGB+CCT Controller.
Durée
20 minute(s) minute(s)
Creation
Introduction
I ordered a RGB+CCT controller online and to my surprise the device came with a new Tuya WiFi module instead of an ESP module.
Now I am trying to swap the WR3 Tuya WiFi module with an ESP-12f module.
In the following steps I will display my findings.
Étape 1 - The PCB on which the Tuya WR3 module is soldered on.
I desoldered the WR3 module to check the connections with my meter and also used a lamp to expose the traces.
Étape 2 - The Top and bottom side of the whole PCB.
This shows the top and bottom side
en
none
0
Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #
Pas encore enregistré ? Créez un compte pour profiter de toutes les fonctionnalités du service !