Is it possible to replace the WR3 module with an ESP-12 module

In this Documentation I am showing what I was able to find out about the MiBoxer WL5 5 in 1 WiFi RGB+CCT Controller.

Difficulté

Medium Moyen

Durée

20 minute(s) minute(s)

Catégories

Électronique

Coût

15 EUR (€)

Creation

Introduction

I ordered a RGB+CCT controller online and to my surprise the device came with a new Tuya WiFi module instead of an ESP module.

Now I am trying to swap the WR3 Tuya WiFi module with an ESP-12f module.

In the following steps I will display my findings.

Matériaux

Outils

Étape 1 - The PCB on which the Tuya WR3 module is soldered on.

I desoldered the WR3 module to check the connections with my meter and also used a lamp to expose the traces.

Étape 2 - The Top and bottom side of the whole PCB.

This shows the top and bottom side

en none 0 Draft