Voir la source de Installing a Metal Roof to your Chicken Coop

{{ {{tntn|Tuto Details}}
|Main_Picture=Installing_a_Metal_Roof_to_your_Chicken_Coop_Completed_the_Building_of_the_Chicken_Coop.jpg
|Licences=Attribution (CC BY)
|Description=<translate><!--T:1--> This tutorial contains suggestions and guidelines on how to install a roof to your chicken coop.</translate>
|Area=House
|Type=Technique
|Difficulty=Easy
|Duration=5
|Duration-type=hour(s)
|Cost=75.00
|Currency=USD ($)
|Tags=metal roof, roofing
|SourceLanguage=none
|Language=en
|IsTranslation=0
}}
{{ {{tntn|Introduction}}
|Introduction=<translate><!--T:2--> One of the harders parts of adding a roof to your chicken coops is to get the right list of materials you'll need.</translate>
}}
{{ {{tntn|Materials}}
|Material=<translate><!--T:3--> metal roofing, roofing screws, metal ridge,</translate>
|Tools=<translate><!--T:4--> hammer, roofing screws, tape measure, tin snips, tape measure,</translate>
}}
{{ {{tntn|Separator}}}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate><!--T:5--> Measuring Up</translate>
|Step_Content=<translate><!--T:6-->
One of the hardest parts of adding a roof to your chicken coops is to get the right list of materials you'll need.

<!--T:7-->
To work out the exact length each section, get the measurement from the top edge of the coop roof down to the bottom edge of the roofing timber.</translate>
|Step_Picture_00=Installing_a_Metal_Roof_to_your_Chicken_Coop_Measuring_Up.png
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate><!--T:8--> Cutting and fitting</translate>
|Step_Content=<translate><!--T:9-->
Before you begin to install the roof you should make sure the frame and all supporting roof members are straight.

<!--T:10-->
Cutting in of the metal roofing materials will need to be done on-site to ensure the best fit for the roofing sheets.

<!--T:11-->
Some minor cuts or corrections maybe required once the roofing sheets have been fitted over the chicken coop to ensure adequate overhang is provided.</translate>
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate><!--T:12--> Fixing Roof Down</translate>
|Step_Content=<translate><!--T:13-->
The metal roofing sheets need to be installed plumb, straight and square to the eave of the coop roof.

<!--T:14-->
When fitting the first roof sheet make sure it is perfectly straight and square to the bottom edge of the chicken coop.</translate>
|Step_Picture_00=Installing_a_Metal_Roof_to_your_Chicken_Coop_Untitled_1.png
}}
{{ {{tntn|Tuto Step}}
|Step_Title=<translate><!--T:15--> Finishing off</translate>
|Step_Content=<translate><!--T:16-->
[https://www.no1roofing.com.au/ Roofing sheets] need to be fastened down once in place and this is to be done using the appropriate galvanized roofing screws.

<!--T:17-->
For best appearances make sure the roofing screws are fastened in a nice straight, parallel line and a minimum of 200mm apart.</translate>
|Step_Picture_00=Installing_a_Metal_Roof_to_your_Chicken_Coop_Untitled.png
}}
{{ {{tntn|Notes}}
|Notes=<translate></translate>
}}
{{ {{tntn|Tuto Status}}
|Complete=Published
}}