FabCat House : Différence entre versions

(Page créée avec « {{ {{tntn|Tuto Details}} |SourceLanguage=none |Language=en |IsTranslation=0 |Main_Picture=FabCat_House_03_sm.jpg |Licences=Attribution-ShareAlike (CC BY-SA) |Description=D... »)
 
(8 révisions intermédiaires par 5 utilisateurs non affichées)
Ligne 1 : Ligne 1 :
 
{{ {{tntn|Tuto Details}}
 
{{ {{tntn|Tuto Details}}
−
|SourceLanguage=none
 
−
|Language=en
 
−
|IsTranslation=0
 
 
|Main_Picture=FabCat_House_03_sm.jpg
 
|Main_Picture=FabCat_House_03_sm.jpg
 
|Licences=Attribution-ShareAlike (CC BY-SA)
 
|Licences=Attribution-ShareAlike (CC BY-SA)
−
|Description=Download, faricate & construct a shelter for a stray cat, or a house for your furry friend.
+
|Description=<translate><!--T:1--> Lasercut house for your furry friend.</translate>
 
|Area=Decoration, Furniture, House, Sport and Outside, Play and Hobbies
 
|Area=Decoration, Furniture, House, Sport and Outside, Play and Hobbies
 
|Type=Creation
 
|Type=Creation
Ligne 14 : Ligne 11 :
 
|Currency=EUR (€)
 
|Currency=EUR (€)
 
|Tags=laser, CNC,, decoupe laser
 
|Tags=laser, CNC,, decoupe laser
 +
|SourceLanguage=none
 +
|Language=en
 +
|IsTranslation=0
 
}}
 
}}
 
{{ {{tntn|Introduction}}
 
{{ {{tntn|Introduction}}
−
|Introduction=Project website : <nowiki>http://fabcat.gregor-design.eu</nowiki>
+
|Introduction=<translate><!--T:2-->
−
 
 
 
Download, faricate & construct a shelter for a stray cat, or a house for your furry friend. 
 
Download, faricate & construct a shelter for a stray cat, or a house for your furry friend. 
  
 +
<!--T:4-->
 
You only need couple of plywood boards to cut on laser with working area min. 800x500mmIf requested I'll try to do an adaptation for 700x500.
 
You only need couple of plywood boards to cut on laser with working area min. 800x500mmIf requested I'll try to do an adaptation for 700x500.
  
−
Also, I invite you to fill in my survey on makers movement  http://survey.gregor-design.eu
+
<!--T:5-->
−
 
+
Once you've done fabricating, please, fill in my short survey on how did you make your FabCat House on the project website as well.</translate>
−
And once you've done fabricating, please, fill in my short survey on how did you make your FabCat House on the project website
 
−
 
 
−
THANK YOU VERY MUCH!! :) Btw. If you have any propositions on improvement I invite you to contact me
 
 
}}
 
}}
 
{{ {{tntn|Materials}}
 
{{ {{tntn|Materials}}
−
|Material=6 planks of plywood - 800x500
+
|Material=<translate><!--T:8-->
−
 
+
* 6 planks of plywood - 800x500
−
1 plank of plywood - 400x300
+
* 1 plank of plywood - 400x300
−
 
+
* Optional:
−
Optional:
+
* Varnish
−
 
+
* Wood stain</translate>
−
Varnish
+
|Tools=<translate><!--T:13--> * Laser</translate>
−
 
+
|Tuto_Attachments={{ {{tntn|Tuto Attachments}}
−
Wood stain
+
|Attachment=Planks 800x500.pdf
−
|Tools=Laser
+
}}{{ {{tntn|Tuto Attachments}}
−
|Prerequisites={{ {{tntn|Prerequisites}}}}
+
|Attachment=Leg protections.stl
−
|Tuto_Attachments={{ {{tntn|Tuto Attachments}}}}{{ {{tntn|Tuto Attachments}}}}
+
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=découpe1.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=découpe2.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=decoupe3.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=decoupe4.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=decoupe5.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=decoupe6.svg
 +
}}{{ {{tntn|Tuto Attachments}}
 +
|Attachment=decoupe7.svg
 +
}}
 +
|ExternalAttachmentsLinks={{ {{tntn|ExternalAttachmentsLinks}}
 +
|ExternalAttachmentsLinks=http://fabcathouse.wixsite.com/cats
 +
}}
 
}}
 
}}
 
{{ {{tntn|Separator}}}}
 
{{ {{tntn|Separator}}}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Laser cut
+
|Step_Title=<translate><!--T:14--> Laser cut</translate>
−
|Step_Content=These are the parts you should cut on laser cutter. Consider using wood stain and first layer of varnish before the assembly
+
|Step_Content=<translate><!--T:15-->
 +
These are the parts you should cut on laser cutter. Consider using wood stain and first layer of varnish before the assembly
  
 +
<!--T:16-->
 
You need to cut the planks into the pieces using a laser cutter with working area min. 80x50cm (31.5 x 19.7 inch). 
 
You need to cut the planks into the pieces using a laser cutter with working area min. 80x50cm (31.5 x 19.7 inch). 
  
 +
<!--T:17-->
 
You can get an access to this machines in various places - fablabs, makerspaces, hackerspaces or commercial services like TechShop or others.
 
You can get an access to this machines in various places - fablabs, makerspaces, hackerspaces or commercial services like TechShop or others.
  
−
Map of fablabs: <nowiki>https://www.fablabs.io/labs/map</nowiki> Map of fablabs and other labs: <nowiki>http://www.makery.info/en/map-labs/</nowiki> Map of makerspaces: <nowiki>http://themakermap.com/</nowiki>
+
<!--T:18-->
 +
* Map of fablabs: [https://www.fablabs.io/labs/map www.fablabs.io/labs/map]
 +
* Map of fablabs and other labs: [http://www.makery.info/en/map-labs www.makery.info/en/map-labs]
 +
* Map of makerspaces: [http://themakermap.com/ themakermap.com]
  
−
There’s much more, not all of the places are listed in all maps, you can also try to research it by yourself.
+
<!--T:19-->
 +
There’s much more, not all of the places are listed in all maps, you can also try to research it by yourself.</translate>
 
|Step_Picture_00=FabCat_House_pieces.jpg
 
|Step_Picture_00=FabCat_House_pieces.jpg
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Assembly
+
|Step_Title=<translate><!--T:20--> Assembly</translate>
−
|Step_Content=Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.
+
|Step_Content=<translate><!--T:21--> Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.</translate>
 
|Step_Picture_00=FabCat_House_04.jpg
 
|Step_Picture_00=FabCat_House_04.jpg
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Protection (optional)
+
|Step_Title=<translate><!--T:22--> Protection (optional)</translate>
−
|Step_Content=Depending on how solid and resistant you want your house to be you can apply wood stain and varnish. For exterior use, varnish is absolutely necessary. 
+
|Step_Content=<translate><!--T:23-->
 +
Depending on how solid and resistant you want your house to be you can apply wood stain and varnish. For exterior use, varnish is absolutely necessary. 
  
 +
<!--T:24-->
 
Wood stain/finish can provide additional protection and a nice finish to your object. You can choose different types and colors.
 
Wood stain/finish can provide additional protection and a nice finish to your object. You can choose different types and colors.
  
 +
<!--T:25-->
 
Varnish (marine or other type) is a great tool to make your object resistant to humidity or insects and give it a nice finish. Also, after assembling the object, it will glue it together and fill in small cracks.
 
Varnish (marine or other type) is a great tool to make your object resistant to humidity or insects and give it a nice finish. Also, after assembling the object, it will glue it together and fill in small cracks.
  
−
Apply varnish and wood stain with a brush. Don’t forget to wash it really good after each use.
+
<!--T:26-->
 +
Apply varnish and wood stain with a brush. Don’t forget to wash it really good after each use.</translate>
 
|Step_Picture_00=FabCat_House_varnish.png
 
|Step_Picture_00=FabCat_House_varnish.png
 
|Step_Picture_01=FabCat_House_wood_stain.png
 
|Step_Picture_01=FabCat_House_wood_stain.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Cord & Metal Tent Pegs (optional)
+
|Step_Title=<translate><!--T:27--> Cord & Metal Tent Pegs (optional)</translate>
−
|Step_Content=At the bottom of the house's ribs you can find set of 3mm holes.
+
|Step_Content=<translate><!--T:28-->
 +
At the bottom of the house's ribs you can find set of 3mm holes.
  
−
If necessary, you can use them to fix the house to the ground using a cord and metal tent pegs.
+
<!--T:29-->
 +
If necessary, you can use them to fix the house to the ground using a cord and metal tent pegs.</translate>
 
|Step_Picture_00=FabCat_House_cord.png
 
|Step_Picture_00=FabCat_House_cord.png
 
|Step_Picture_01=FabCat_House_tent_pegs.png
 
|Step_Picture_01=FabCat_House_tent_pegs.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Cork Sheet/roll or Insulation Board (optional)
+
|Step_Title=<translate><!--T:30--> Cork Sheet/roll or Insulation Board (optional)</translate>
−
|Step_Content=Depending on where you live, there’s a possibility that you will want to protect cats from the cold weather. There are multiple options, for extreme cold you could install rigid insulation boards or cork sheets (2 or more mm)
+
|Step_Content=<translate><!--T:31-->
 +
Depending on where you live, there’s a possibility that you will want to protect cats from the cold weather. There are multiple options, for extreme cold you could install rigid insulation boards or cork sheets (2 or more mm)
  
−
Both are very easy to cut with scissors or cutter (cork even with laser cutter).
+
<!--T:32-->
 +
Both are very easy to cut with scissors or cutter (cork even with laser cutter).</translate>
 
|Step_Picture_00=FabCat_House_cork.png
 
|Step_Picture_00=FabCat_House_cork.png
 
|Step_Picture_01=FabCat_House_insul.png
 
|Step_Picture_01=FabCat_House_insul.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=3D Printer + 3D Printed Leg Protection + Silicon Glue (optional)
+
|Step_Title=<translate><!--T:33--> 3D Printer + 3D Printed Leg Protection + Silicon Glue (optional)</translate>
−
|Step_Content=If you want to use this object in exterior you need to protect its wooden legs against the humidity. One of the options is to print leg protection on a 3D printer.
+
|Step_Content=<translate><!--T:34-->
 +
If you want to use this object in exterior you need to protect its wooden legs against the humidity. One of the options is to print leg protection on a 3D printer.
  
−
This option can be useful also if you want to protect your floor. It is possible that the print will still be sharp so you will have to sand it on the edges.
+
<!--T:35-->
−
|Step_Picture_00=FabCat_House_legs.gif
+
This option can be useful also if you want to protect your floor. It is possible that the print will still be sharp so you will have to sand it on the edges.</translate>
−
|Step_Picture_01=FabCat_House_legs2.gif
+
|Step_Picture_00=FabCat_House_Leg_protections.stl
−
|Step_Picture_02=FabCat_House_silicone.gif
+
|Step_Picture_01=FabCat_House_legs.gif
 +
|Step_Picture_02=FabCat_House_legs2.gif
 +
|Step_Picture_03=FabCat_House_silicone.gif
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
−
|Step_Title=Result
+
|Step_Title=<translate><!--T:36--> Result</translate>
−
|Step_Content=Enjoy! :)
+
|Step_Content=<translate><!--T:37--> Enjoy! :)</translate>
 
|Step_Picture_00=FabCat_House_01_ssm.jpg
 
|Step_Picture_00=FabCat_House_01_ssm.jpg
 
|Step_Picture_01=FabCat_House_02_ssm.jpg
 
|Step_Picture_01=FabCat_House_02_ssm.jpg
 
}}
 
}}
 
{{ {{tntn|Notes}}
 
{{ {{tntn|Notes}}
−
|Notes=
+
|Notes=<translate><!--T:38-->
 +
Project website : [http://fabcat.gregor-design.eu/ fabcat.gregor-design.eu]
 +
 
 +
<!--T:39-->
 +
THANK YOU VERY MUCH!! :) Btw. If you have any propositions on improvement I invite you to contact me!
 +
 
 +
<!--T:40-->
 +
Also, I invite you to fill in my survey on makers movement on the project website.</translate>
 
}}
 
}}
 
{{ {{tntn|Tuto Status}}
 
{{ {{tntn|Tuto Status}}
−
|Complete=Draft
+
|Complete=Published
 
}}
 
}}

Version du 3 août 2018 à 15:39

Lasercut house for your furry friend.

Auteur avatarDalia Ge | Dernière modification 9/12/2019 par Clementflipo

FabCat House 03 sm.jpg
Difficulté
Facile
Durée
15 heure(s)
Catégories
Décoration, Mobilier, Maison, Sport & Extérieur, Jeux & Loisirs
Coût
18 EUR (€)
Lasercut house for your furry friend.
Difficulté
Facile
Durée
15 heure(s)
Catégories
Décoration, Mobilier, Maison, Sport & Extérieur, Jeux & Loisirs
Coût
18 EUR (€)
Autres langues :
English • ‎français
Licence : Attribution-ShareAlike (CC BY-SA)

Introduction

Download, faricate & construct a shelter for a stray cat, or a house for your furry friend. 

You only need couple of plywood boards to cut on laser with working area min. 800x500mmIf requested I'll try to do an adaptation for 700x500.

Once you've done fabricating, please, fill in my short survey on how did you make your FabCat House on the project website as well.

Matériaux

  • 6 planks of plywood - 800x500
  • 1 plank of plywood - 400x300
  • Optional:
  • Varnish
  • Wood stain

Outils

  • Laser

http://fabcathouse.wixsite.com/cats
Planks 800x500.pdf
Leg protections.stl
découpe1.svg
découpe2.svg
decoupe3.svg
decoupe4.svg
decoupe5.svg
decoupe6.svg
decoupe7.svg

Étape 1 - Laser cut

These are the parts you should cut on laser cutter. Consider using wood stain and first layer of varnish before the assembly

You need to cut the planks into the pieces using a laser cutter with working area min. 80x50cm (31.5 x 19.7 inch). 

You can get an access to this machines in various places - fablabs, makerspaces, hackerspaces or commercial services like TechShop or others.

There’s much more, not all of the places are listed in all maps, you can also try to research it by yourself.

FabCat House pieces.jpg




Étape 2 - Assembly

Follow the steps to assembly the object, it shouldn't take you long. If the thickness of the planks is right, you shouldn't need to use any glue.

FabCat House 04.jpg




Étape 3 - Protection (optional)

Depending on how solid and resistant you want your house to be you can apply wood stain and varnish. For exterior use, varnish is absolutely necessary. 

Wood stain/finish can provide additional protection and a nice finish to your object. You can choose different types and colors.

Varnish (marine or other type) is a great tool to make your object resistant to humidity or insects and give it a nice finish. Also, after assembling the object, it will glue it together and fill in small cracks.

Apply varnish and wood stain with a brush. Don’t forget to wash it really good after each use.

FabCat House varnish.png
FabCat House wood stain.png



Étape 4 - Cord & Metal Tent Pegs (optional)

At the bottom of the house's ribs you can find set of 3mm holes.

If necessary, you can use them to fix the house to the ground using a cord and metal tent pegs.

FabCat House cord.png
FabCat House tent pegs.png



Étape 5 - Cork Sheet/roll or Insulation Board (optional)

Depending on where you live, there’s a possibility that you will want to protect cats from the cold weather. There are multiple options, for extreme cold you could install rigid insulation boards or cork sheets (2 or more mm)

Both are very easy to cut with scissors or cutter (cork even with laser cutter).

FabCat House cork.png
FabCat House insul.png



Étape 6 - 3D Printer + 3D Printed Leg Protection + Silicon Glue (optional)

If you want to use this object in exterior you need to protect its wooden legs against the humidity. One of the options is to print leg protection on a 3D printer.

This option can be useful also if you want to protect your floor. It is possible that the print will still be sharp so you will have to sand it on the edges.

Erreur lors de la création de la miniature : module.js:681 return process.dlopen(module, path._makeLong(filename)); ^ Error: libpng12.so.0: cannot open shared object file: No such file or directory at Object.Module._extensions..node (module.js:681:18) at Module.load (module.js:565:32) at tryModuleLoad (module.js:505:12) at Function.Module._load (module.js:497:3) at Module.require (module.js:596:17) at require (internal/module.js:11:18) at Object.<anonymous> (/var/www/dokitfarm/mw/dokit-1.22.0/lib/3d2png/node_modules/canvas/lib/bindings.js:3:18) at Module._compile (module.js:652:30) at Object.Module._extensions..js (module.js:663:10) at Module.load (module.js:565:32)
FabCat House legs.gif
FabCat House legs2.gif
FabCat House silicone.gif


Étape 7 - Result

Enjoy! :)

FabCat House 01 ssm.jpg
FabCat House 02 ssm.jpg



Notes et références

Project website : fabcat.gregor-design.eu

THANK YOU VERY MUCH!! :) Btw. If you have any propositions on improvement I invite you to contact me!

Also, I invite you to fill in my survey on makers movement on the project website.

Commentaires

Published

Récupérée de « https://wikifab.org/w/index.php?title=FabCat_House&oldid=50112 »
© 2017 - 2024 Dokit, SAS.