Choosing the Right Spray Tips for Your Spray Gun

Choosing the right tip can make an enormous difference to the finish quality, completion time, and cost effectiveness of any spraying project.

Difficulté

Very easy Très facile

Durée

1 hour(s) heure(s)

Catégories

Machines & Outils

Coût

0.00 USD ($)

spray tips, choose spray tips, spray painting tips Choosing_the_Right_Spray_Tips_for_Your_Spray_Gun_The_Ultimate_Guide_to_finding_the_right_size_spray_paint_tips.jpg en none Technique 0

Introduction

Choosing the right tip can make an enormous difference to the finish quality, completion time, and cost effectiveness of any spraying project.

A good tip is a real investment and will pay for itself very quickly.

Simply follow our 3 step process to select the right spray tip for your next paint job.

• STEP 1 – Find you paint or stain thickness to work out your tip size
• STEP 2 – Match the tip size to the fan width to work out correct tip size
• STEP 3 – Confirm your selected tip is supported by your sprayer equipment

Matériaux

paint

Outils

spray paint tips

Étape 1 - Find you paint or stain thickness to work out your tip size

Étape 2 - Match the tip size to the fan width to work out correct tip size

Secondly, you’ll want to work out the fan width that’s required to work out your spray tip.

Pro Tip

• Number calculation, it’s the first digit is half the fan width (5 x 2 = 10 inch fan width)
• It’s the last two digits that are the size of the tip opening in thousandths of an inch.

Étape 3 - Confirm your selected tip is supported by your sprayer equipment

Finally, you’ll want to confirm it the selected spray tip size is supported by your sprayer equipment.

Étape 4 - Let's look at an example

A 515 tip compared with a 523 tip. Both tips will spray a pattern 10 inches wide but the 523 tip will produce a thicker coating provided you use the same sprayer pressure and hand speed.

On the other hand, keeping the orifice size the same and increasing the fan width allows you to spread the same amount of material over a wider area.

When it comes to choosing tips, you should start by checking the coating manufacturer’s instructions; they have researched optimum tip sizes for the viscosity of their particular products.

Having said that, the range of tip sizes available allows you almost infinite control of your spraying finish and quality.

Draft