]> 2026-04-12T10:18:59+02:00 Geiger counter 0 en Electronics Draft 30 EUR (€) In this tutorial you will learn how to assemble a nuclear radiation detector You can purchase the Geiger Counter Kit here https://www.banggood.com/Assembled-DIY-Geiger-Counter-Kit-Module-Miller-Tube-GM-Tube-Nuclear-Radiation-Detector-p-1136883.html?rmmds=search&cur_warehouse=CN Hard 1

hour(s)

A Geiger counter is an instrument used for detecting and measuring ionizing radiation. Also known as a Geiger–Mueller counter (or Geiger–Müller counter), it is widely used in applications such as radiation dosimetry, radiological protection, experimental physics, and the nuclear industry. Geiger counters are used to detect radioactive emissions, most commonly beta particles and gamma rays. The counter consists of a tube filled with an inert gas that becomes conductive of electricity when it is impacted by a high-energy particle. false en Geiger_counter_EM5Kxv.png Description: Name:Radiation Detector system Geiger tube parameters: Technical parameters diameter:Φ10±0.5mm Total length: 90±2mm Starting voltage: < 350V Recommended operating voltage: 380V Minimum plateau length: 80V Maximum plateau slope: 10%/80V Extreme operating voltage: 550V The maximum count rate: 25 times / min Life: > 1 x 10^9 pulse Medium temperature: -40 ~ 55 ℃ Size:108x63x20mm Infos: https://www.banggood.com/Assembled-DIY-Geiger-Counter-Kit-Module-Miller-Tube-GM-Tube-Nuclear-Radiation-Detector-p-1136883.html?rmmds=search&cur_warehouse=CN https://drive.google.com/folderview?id=0B9itH-BnWE5sY2JGRkM4MWhSYkE&usp=sharing https://drive.google.com/drive/folders/0B9itH-BnWE5sY2JGRkM4MWhSYkE Features: 1) 5V power supply, or 1.5V 3x battery; 1.2V 4x battery, current: 30mA - 12mA 2) for the detection of 20mR/h ~ 120mR/h of gamma rays and 100 ~ 1800 off variables / points / cm 2 of the soft beta ray. 3) sound and light alarm 4) interrupt the output interface, through this interface can be connected to the microcontroller and then displayed on the LCD. 5) Ardunio compatible 6) supports most of the Geiger tube: M4011, STS-5, SBM20, J305, etc. (the 330~600V operating voltage of the Geiger tube can be supported). 7) support the computer (PC) data acquisition, Matlab analysis and processing Detection of nuclear radiation work (copy the following link to the browser to watch): [http://v.youku.com/v_show/id_XNzI3MTU2NzQ0.html Http://v.youku.com/v_show/id_XNzI3MTU2NzQ0.html] Customers using our Geiger counter to record the video: [http://v.youku.com/v_show/id_XOTE4ODIyNTIw.html Http://v.youku.com/v_show/id_XOTE4ODIyNTIw.html] Compatible with Arduino: (recommended UNO R3 Arduino, or any other arbitrary with 5V and external interrupt INT) Internet can be downloaded: SPI example for Radiation Logger Arduino Logger Radiation can be used as the host computer software to build radiation monitoring station. Package included: 1 x Assembled Radiation Detector system 1 x GM Tube 1 x Power supply cable 1 x Battery Holder (without batteries) 3 x Jumper Wires 4 x Nuts 1 x Acrylic cover none This is a timelapse of the assembly process of the geiger counter Connect the P3 Pin GND, 5V, VIN to arduino GND, 5V, Digital 2 respectively. Then in the arduino software open the file: spi_rad_logger.ino which you could find here https://drive.google.com/open?id=1BBhsOjpKFHZ5vheR6OtunmriIw6JLzbc Be sure to change the Serial.print(cpm) command to Serial.println(cpm) in the void loop(){} for better readability. Download the program and open the serial port window by clicking on the scope on the upper right corner. Then we’ll get the radiation value displayed in CPM, counter per minutes which could be converted to uSv/h with the index 151(151CPM=1uSv/h for M4011 GM Tube). Soldering the geiger counter Using the geiger counter with an arduino Youtube 2020-02-04T13:26:26Z

2458884.0600232

Geiger counter 0 0 0 0 [8,"smw-datavalue-constraint-error-allows-value-list","undefined","Technique, Creation","Type"] Geiger counter# ERRa1fa27779242b4902f7ae3bdd5c6d508