Wooden pet connects to Facebook

In this tutorial we will create a wooden pet that connects to Facebook. It will post a message of your choice on your own timeline whenever its tail is touched.

Par Digijeunes

11 étapes

Aucune étape

Sommaire

Accueil 1. Setup an account and create a new feed on adafruit.io 2. Install Arduino IDE 3. Prepare the ESP32 board on your computer 4. Check that the board is correctly configured 5. Wiring the LED and the touch sensor to the ESP32 6. Place the electronic board inside the pet 7. Programming on tuniot 8. Install Adafruit_MQTT.h and Adafruit_MQTT_Client.h libraries on Arduino IDE 9. Programming on Arduino IDE 10. Create an applet on IFTTT 11.

Matériaux & outils nécessaires

Matériaux

<translate></translate>

Outils

<translate></translate>