SunZilla - Setup manual/en

This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL!

Par FuzzyBot
  • Licences
  • CERN Open Hardware Licence v1.2
Démarrer

17 étapes

Aucune étape

Sommaire

Accueil 1. Connect the three boxes 2. Close the solar module box 3. Insert the aluminium profiles 4. Pull down the elastic bands 5. 6. 7. 8. Switch on battery box 9. Switch on socket box 10. Plug in consumer 11. Dismanteling 12. Switch off Socket Box if switched on 13. Turn Solar Panels out of sun 14. Disconnect Solar-Connectors 15. Switch off Battery box 16. Unplug / detach orange cables 17. Switch on Socket box again

Matériaux & outils nécessaires

Matériaux

  • Get the three boxes : 1. The left one (A) is the battery box 2. The mid- dle one (B) the solar box 3. The right one (C) the socket box Open the solar module box
  • and get the solar cells
  • the cables
  • the aluminium profiles and the 8 screws outside.

Outils

  • Aucun outil spécifié...