Pet that lights up upon interaction

In this tutorial, you will learn how to create a wooden pet that lights up when you touch its tail. This will form the basis for a next tutorial in which you will learn how to connect your pet to social networks.

Par Digijeunes

8 étapes

Aucune étape

Sommaire

Accueil 1. Install Arduino IDE 2. Prepare the ESP32 board on your computer 3. Check that the board is correctly configured 4. Wiring the LED and the touch sensor to the ESP32 5. Place the electronic board inside the pet 6. Programming on tuniot 7. Programming on Arduino IDE 8.

Matériaux & outils nécessaires

Matériaux

<translate> For this activity
you will need to laser cut your own pet. The .svg file is available for download [https://drive.google.com/file/d/1AHXk4zxDN0U7YNiMKVyBzvakh8pY8MH9/view?usp=sharing here].</translate>

Outils

<translate></translate>