Mighty maker level belt

The Mighty Maker Level Belt is two integrated RGB LED strips as a wearable item which is programmed using an Arduino so that it illuminates a certain colour.

Par Digijeunes

17 étapes

Aucune étape

Sommaire

Accueil 1. Create Temporary Tester Circuit 2. Code Arduino 3. Add Battery 4. Change Your Code for Your Belt to Be the Correct Colour 5. Create Your Permanent Circuit: Step 1 - Attach Pin Headers 6. Create Your Permanent Circuit: Step 2 - Attach Transistors and Ground 7. Create Your Permanent Circuit: Step 3 - Connect Resistors and Connecting Wires 8. Test RGB Strips for Belt 9. Attach Your Battery and Label Your Wires 10. Create the Pouch for the Arduino 11. Insert Your Arduino Board 12. Connect You Wires to the RGB Strips 13. Create Correct Size Pieces for the Belt 14. Connect Your RGB Strips to the Belt 15. Stitch Together the Belt 16. Add Velcro 17. Check It Works, Watch It Glow and Decorate!

Matériaux & outils nécessaires

Matériaux

Aucun matériel spécifié...

Outils

Aucun outil spécifié...