]> 2026-04-30T01:06:19+02:00 SunZilla - Setup manual 0 en Energy Published 0 EUR (€) This is the Sunzilla 3.0 assembly manual with Safety Instructions. This manual explains how to commission and decommission the SunZilla 3.0. and includes imporant safety information. PLEASE DO NOT ATTEMPT TO USE THE SUNZILLA 3.0 UNTIL YOU HAVE READ THIS MANUAL! Easy 20 minute(s) '''Technical details:''' * Solar peak Power: 140W * Maximum AC-output of pure sinus inverter: 350W (700W peakload) * Effectiv battery storage: 600 Wh false en CERN Open Hardware Licence v1.2 Sunzilla_Assembly_03.png Get the three boxes : 1. The left one (A) is the battery box 2. The mid- dle one (B) the solar box 3. The right one (C) the socket box Open the solar module box, and get the solar cells, the cables, the aluminium profiles and the 8 screws outside. none Press the cable inside when both white points match and turn the blue top unit of the cable to lock. Close the solar module box, put the two long aluminium profiles in their holes. Open slightly the box and insert two screws to lock the profiles. Choose the same holes in the middle and be sure to do the same on both sides. Take the shorter aluminium profiles, insert them as shown on the pic and lock them. Take the solar cells. Unfold them and shift the aluminium edges at all four sides Take the upper part of the solar module and connect the whole solar module with the upper aluminium profile. Be sure that the solar module is on the left side of the aluminium profile. Connect also the lower part. Connect the cables from the solar cells to the solar module box. Switch on battery box. Green light should turn on Switch on socket box. Green light should turn on Switch off Socket Box if switched on Turn Solar Panels out of sun and cover at least one Solar-Panel (for exam- ple with Pullover) Switch on Socket box again until green light is off (to discharge local en- ergy storage), then switch OFF again! YOU’RE DONE! <div class="icon-instructions caution-icon"> <div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div> <div class="icon-instructions-text">IMPORTANT!! DANGER!! READ DISMANTLING MANUAL!!</div> </div> At Dismanteling, you MUST follow the right order of these steps, otherwise you could be hurt. Connect the three boxes Close the solar module box Insert the aluminium profiles Pull down the elastic bands Switch on battery box Switch on socket box Plug in consumer Dismanteling Switch off Socket Box if switched on Turn Solar Panels out of sun Disconnect Solar-Connectors Switch off Battery box Unplug / detach orange cables Switch on Socket box again Technique 2019-12-09T10:59:33Z 2458826.9580208 SunZilla - Setup manual 0 0 0